OATS Installation guide

Hi All,
Is there an installation guide for the Oracle Application Testing Suite?
The reason I ask is that I attempted to install v9.2. I chose to install the Weblogic app server locally but then chose to use our existing v10gv2 database. The installation succeeded without any errors but I was never able to log in and do anything. I could see in our DB that various aspects were created (OATS, OLM, OLT) but using the users OATS, OLT OLM Administrator, etc, I was not able to log in. After performing many many Google searches trying to find out what the default password is for these users, all results indicated that the password is set to what I was prompted for during install. I was never prompted for a "new" password. I was prompted for a DB user/password of our existing DB, that is all.
I then began looking for an installation guide to shed some light on what I may have done wrong during the install. I can't easily find one.
1 - Is there an installation guide for OATS?
2 - What are the default passwords for the required users of OATS (OATS, OLT, OLM, Administrator)?
3 - Is there some additional step that I need to perform when using an existing DB that the install doesn't do?
I have since uninstalled what I had and was hoping to locate an install guide for a second attempt.
Any help would be greatly appreciated.
John

Never mind...figured it out myself.
I didn't remember being prompted for a password but I guess I was. I reinstalled, got prompted for a password, actually remembered it this time and everything so far is fine.

Similar Messages

Installation guide for 9ias on RedHat Advanced Server 3

Hi
Does anyone has the installation guide for 9ias on RedHat Advanced Server 3 please? Thank you!

there is an installation guide for oracle applic server 9 and above on red hat advanced server 3 in pdf format on the linux technology center page on oracle. here is the file link.
"Install Guide: Oracle Application Server on Red Hat Enterprise Linux AS (PDF) May 2003"
you may wanna check the following link for that page.
http://otn.oracle.com/tech/linux/index.html
is this what you are looking for?
asif

Questions on the Hardware requirement mention in the 12c installation guide

Hello experts,
I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below.
RAM with ADP1, JVMD2 8 GB 12 GB 20 GB
1 ADP Manager is Application Dependency and Performance
2 JVMD is JVM Diagnostics
Question 1: what does this RAM with ADP or JVMD mean. is it just the additional RAM space required in the server or does is that special requirement ??
Oracle WebLogic Server JVM Heap 1.7 GB 4 GB 8 GB
Size
Question 2: What is this JVM Heap size ? how do we configure this in the server ??
Thanks in Advance for your Help.

Hi,
#1: It means if you also want to install ADP and JVMD, the total RAM required is a small (e.g. < 1000 targets), medium (e.g. > 1000 targets and < 10000 targets), large EM deployment (e.g. > 10000 targets) is 8 GB, 12 GB, 20 GB, respectively. That is the memory requirement for an OMS host.
#2: The heap size for the OMS java process. You can adjust the heap size by changing the -Xmx<heapsize> (see an example below) in the following file:
<middleware_home>/gc_inst/user_projects/domains/GCDomain/bin/startEMServer.sh
An example of OMS heap size setting of 2048 MB:
if [ "${SERVER_NAME}" != "EMGC_ADMINSERVER" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx1740m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing"
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx2048m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:+CMSClassUnloadingEnabled -XX:CompileThreshold=8000 -XX:PermSize=128m"
Regards,
- Loc

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Fail to install E-Business Suite Diagnostics Installation Guide ID 167000.1

I am following E-Business Suite Diagnostics Installation Guide [ID 167000.1] for the installation.
Firstly, i have successfully adsplice Patch 3636980.
then i try on Patch 7530017 and i hit this error during adpatch:
About to update the current-view snapshot: Wed Oct 24 2012 18:27:43
Updating the current-view snapshot...
ORA-01403: no data found
ORA-06512: at "APPS.AD_FILE_SYS_SNAPSHOTS_PKG", line 2095
ORA-06512: at line 2
AutoPatch error:
Error while executing statement (curr-vw updt)
Error calling adphistUpdtCurrVwSnapshot(1).
Error calling adphistStoreCurPatchHistInDB2
AutoPatch error:
Unable to save Patch History information to Database
Then according to note [ID 468940.1], i need to run the Update current view snapshot, and i hit this error:
File "atg_supp_patches.sql"
Either has No Version or Unknown error(-4)
Failed in adusnapGetDetailFileInfo()
AD Administration error:
Failed store Snapshot file info
adusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView()
Error calling adusnapMaintainSnapshot
Checking from knowledge base, i should follow ID 372491.1 to solve the problem, but i can't figure out which record to follow.
AD_APPL_TOPS
appl_top_id,name,server_type_admin_flag,server_type_forms_flag,server_type_node_flag,server_type_web_flag,applications_system_name,appl_top_type,active_flag
1,tafnw1,Y,Y,Y,Y,prod,R,Y
43,*PRESEEDED*,,,,,*PRESEEDED*,S,Y
68,digidb2,Y,N,Y,N,EES06A,R,Y
69,GLOBAL,,,,,EES06A,G,Y
21,crmees06,Y,Y,Y,Y,DEV,R,Y
41,isupplier,N,N,N,Y,DEV,R,Y
42,t_f_w1,,Y,,Y,DEV,R,Y
88,AT_ofsdevdb,Y,Y,Y,Y,DEV,R,Y
45,digiapps1,N,Y,N,Y,DEV,R,Y
65,GLOBAL,,,,,DEV,G,Y
66,digiapps1,N,Y,N,Y,EES06A,R,Y
AD_SNAPSHOTS
snapshot_id,release_id,appl_top_id,snapshot_name,snapshot_type,comments,ran_snapshot_flag
1,21,43,*PRESEEDED*11.5.5,B,Preseeded,Y
8,41,68,CURRENT_VIEW,C,Current View,N
9,41,69,GLOBAL_VIEW,G,Created from Current View Snapshots,N
2,21,88,CURRENT_VIEW,C,Current View,Y
3,61,45,CURRENT_VIEW,C,Current View,Y
4,61,41,CURRENT_VIEW,C,MERGING_APPL_TOPS_DONE,Y
5,21,41,PROD,S, ,Y
6,21,65,GLOBAL_VIEW,G,Created from Current View Snapshots,Y
7,21,41,BACKUP_SNAPSHOT_4,S, ,Y
(sorry, not sure how to post the table nicely)
what should i do next?

Then according to note [ID 468940.1], i need to run the Update current view snapshot, and i hit this error:Please see (ORA-06512 APPS.AD_FILE_SYS_SNAPSHOTS_PKG [ID 372491.1]).
Thanks,
Hussein

Need SAP R/3 4.7 Installation Guide

Guys,
I need the installation Guide for SAP R/3 Installation.Please help me.
I will appreciate if anyone can tell me where i can find it.
Thanks in advance,
Sanu

Rudi,
I clicked on the link that you have provided,But it is prompting a dialog box for user authentication.But the sad thing is that I donot have one.
Can you tell me if there is any other way of getting that document??
Thanks in advance,
Sanu

Installation guide Solaris 10 / Oracle

Hi,
I have been looking for updated installation guides for Solaris 10 / Oracle 10 on service.sap.com/erp-inst and other locations, but I can only find relevant documentation from February 2005. Does any one know where I can get more updated information?
Thanks!
Regards,
Thomas Kjelsrud

Thomas,
I was able to access the same. May be you missed to scroll down the page..
No issues access the below link
<a href="https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002599162004E">Inst guide for All scenarios including Solaris 10/ Oracle</a>
Note that there are two parts
Part I: Planning and Preparation
Part II: Installation and Post-Installation
You must see the planning guide for your scenario Solaris /Oracle installation
Are you planning for distributed or central installation..?
Hope this helps
Good luck
Cheers
Senthil

Need Assistance in getting SAP NetWeaver 7.02 Installation Guide

Hi All,
Can any one please assist me in getting the installation guides for SAP NetWeaver 7.02 on Service Market place?
I searched for its URL but could not get it. Please share it with me.
Waiting for your kind replies.
Regards,
Faisal

Hi Faisal,
You can try this - Log onto SMP
Software Downloads --> Installations and Upgrades --> click on "Installation and Upgrade Guides" on the left panel; this will open a new browser window --> expand "SAP NetWeaver" on the left panel --> SAP NetWeaver 7.0 (2004s) --> select Installation or Upgrade as per your need; then you can select the appropriate guide.
Hope it helps.
Dao

Don't see the SCM Installation Guide on 9i Developer Suite CD

Hi everybody,
I don't see the SCM Installation Guide on my 9i Developer Suite CD. The CD is Release 2 (9.0.2.0.0) for Windows. I do see a file for the release notes titled 'Oracle Software Configuration Manager Release Notes Oracle9i Developer Suite Release 2 (9.0.2). Any leads on where to find the installation guide is appreciated.
I'd like to read the guide before installing Oracle Designer 9i. Any help with installing these two products is appreciated.
Thanks very much,
-- Bill Loggins

Bill,
I don't have a CD to verify its location. However it is available on the otn site. Try the URL:
http://otn.oracle.com/docs/products/repository/content.html
Regards
Mark Pirie

SAP R/3 version 4.6C standard Installation Guide for Windows NT.

Dear Gurus,
Can anyone help me with step by step installation guide of SAP R/3 Ver 4.6C for windows NT on oracle DB 8.1.7.
I have never done SAP installation and this will be my first as the systems was installed by consultants.
regards,
Chansa.

Hi ,
Please have a look
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sapr3.html
http://docs.mandragor.org/files/Operating_systems/BSDs/FreeBSD_Handbook/sapr3.html
This might help you.
Cheers
Deepanshu

Enterprise Portal Sneak Preview, quick installation guide

Hello,
Two or three months ago I have installed the SAP NetWeaver Enterprise Portal Sneak Preview SP9. For this purpose I have used the quick installation guide which formerly could be found under the following web-address:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/quick installation guide for sap netweaver ep on maxdb,%20Developer%20Edition%20Sneak%20Preview.htm
Some of my colleagues would like to install the same release now but the quick installation guide is not available any more.
Can anybody tell me where the quick installation guide is or which installation guide I can use instead for SP9?
Thanks!

Hey Guys,
I have mailed it to your ID's.
In case anyone else needs it, you can mail me directly:
[email protected]
Wish you all a successful installation ...
Cheers,
Gaurav

Installation Guide from Informix 10.00.FC6 to Oracle 10.2

Hi all,
We have SAP 4.6b with Informix 10.00.FC6 on SunOS 5.10
I am loking for the installation guide from informix to Oracle 10.2. Where do we look for the installation guide in service.sap.com/instguides?
Thank You,
Salman

Hi,
Not 100% sure what you are looking for.
Are you looking for the installation guide of 4.6B in Oracle?
Or are you looking for the heteroheneus system copy guide to migrate from Informix to Oracle?
In any case you can find both on the SAP Service Marketplace under
https://service.sap.com/instguides -> Sap Components --> SAP R/3 --> Release 4.6B

Installation guide for OWB 9.2 name and address

Hi,
May you show me where I can find the OWB 9.2 installation document for name and address cleaning software.
In the installation guide of OWB 9.2, it ask to refer to the installation instruction of software vendor. I am going to use the default vendor (Trillium, the same as OWB9.0.4), but I don't know where to find the installation instruction.
Thanks in advance,
Qiguang Wu

When do you get this message? It seems to be referring to the N&A server, but I would need to have more details. When you installed OWB, the installation program asked for the port (defaulting to 4040) where the N&A server would run. Th N&A server should be started automatically when a mapping containing a N&A operator is run. Otherwise, it is possible to start and stop the N&A server by running the NASstart.bat and NASstop.bat unde the <OWB home>/owb/bin/win32 directory (or the same .sh files in the unix directory).
Regards:
Igor

Oracle 9.2 Installation Guide; User question

Hi,
i want to install Oracle 9.2 on SuSE Linux 9.3 professional. Beacuase
of that i read Ivan Kartik's Installation Guide. But i don't understand the
first step. I create an oracle user, but how can i log in as the oracle
user?
Because whenever i try to install oracle as the standard user (not the root)
i get the error that i don't have the specific permissions to install the
configuration assistant.
Can somebody help me, please??
Thank you
Daniel

Hello.
You don't need contact me because I'm checking this section every day.
Installtion of Oracle SW is performed under non privileged user (usually oracle).
Of course there are some steps which could be done with super user rights only.
As far I know there are three steps which must be done by root:
1. create oracle user (dba group)
2. execute the /tmp/OrainstRoot.sh script
3. execute $ORACLE_HOME/root.sh after installation
4. (optional) install new JRE (as desribed in my article)
If you don't have root acount there must be a person responsible for OS (System administrator - SA) with the root account. So when you need to perform som of above steps contant your SA.
I can see (from your post) that you have root account.
I create an oracle user, but how can i log in as the oracle user?Example:
Assume that you are logged as root (or other user). In this case use following command:
su - oracle
Because whenever i try to install oracle as the standard user (not the root)
i get the error that i don't have the specific permissions to install the
configuration assistant.1. You could use other shell (terminal) where you will be logged as root to perform steps under privilegged user
2. or when "su - oracle" was used then simply exit current session by "exit" command.
3. you could login as root when you execute su - command.

Oracle SOA 11g installation guide version 10.3.3 published.

I have just published the Oracle SOA 11g version 10.3.3 guide. I hope this will be helpful for the beginners and for those who wants to start working on oracle SOA suite.
here is the URL
[http://shouab.wordpress.com/oracle-soa-11g-step-by-step-installation-guide/]

Very Helpful indeed. Very comprehansive and detailed. Thanks a lot.

OATS Installation guide

Similar Messages

Maybe you are looking for