OB74 and F.13

Good Afternoon SAP Gurus-
I am puzzled.  I am trying to create clearing rules as a result of lockbox clearing in our clearing account.  I used the following via OB74
G/L NNNN  and criterion ZUONR
when I execute in F.13 entering the co.code, g/l and selecting date from most recent document and remove test run
then execute and enter to accept message this is production run
I get a message that no clearing procedures were carried out
I have over 75,000 line items as a result of lockbox (we did a refresh to our DEV envrionment) recently and I am testing it.
It is not working.
What could it be?
THanks!

When I tested in our DEV environment, it only cleared my test lockbox file, not the existing stuff.  Is there a way to clear previous transactions or does it have to be performed manually.  It looks like if I make the changes in PRD, it will work going forward.
I don't recall having this problem with historical.
Any help?

Similar Messages

  • Clearing is not happend in F-03

    Dear Friends,
    For one GL A/c ...Open items shows 2 documents with same value
    while  am trying to clear account 104140000 and have two matching items both in GBP £13996.16, however when I enter F-03 to clear them only one item shows. Please can you advise me how I can clear this transaction.
    1) Doc 700000156   SB  03.11.2006        13,996.16-
    2) Doc 700000400   SB  30.03.2007        13,996.16
    clearing the open item process Doc  700000156 is not appeard for clear account
    but those two items shown as a open items in GL A/c 104140000
    Thanks In Advance
    Suresh Polineni

    Hi
    First check the criterio maintained in the TCODE:OB74.
    and also check the two doc.referred comparing the criteria used in configuration if both the documents have similar then it will clear the document automatically...and important thing is in which currency you are doing ...take care of the clearing currency
    VVr

  • GR/IR not cleared with F.19

    Hello!
    I use F.19 to regroup the GR/IR account at month end. I select "GR/IR clearing" on the Parameters tab in order to have the GR/IR account cleared at the same time. Unfortunately the account is not cleared.
    Has anyone experienced this issue before?
    Thanks!

    Hi,
    Try to go on OB74 and check your rules in automatic clearing.  You must define the field where the system will read to match items.
    Also, this program is being executed in background processing.
    Thanks,
    Rod

  • F.13. Automatic Clearing ... Special G/L transaction

    Hi:
    I have a problem in FI, and perhaps you know how to solve it. We want to run F.13 transaction, but it does not work for Special G/L transaction (Customer accounts). I have checked data in transaction OB74, and everything seems to be ok. We have no error message, but it does not take any account. I attached the log message I got at end of F.13.
    Please, any idea?
    Thanks in advance.
    Message:
    Please note:                       Category 'A' and 'W' special G/L transactions were not selected    
    System message                     No G/L account documents selected                                  
    System message                     No customer documents selected                                     
    System message                     No vendor documents selected                                       
    Please note:                       Only accounts with debit and credit postings are included          
    Error Log
    No clearing procedures were carried out
    Edited by: Mario Sanchez on Apr 9, 2008 4:32 PM

    Bayantrade-
    Thanks to everyone who replied.  I am trying to test this in DEV however I am still getting the error message:
    No clearing procedures were carried out
    We are on ECC 6.0
    I did the following:
    Went to OB74 and input my GL Chart of account, Account type and the G/L in particular
    Then I input my Criteria 1 for ZUONR for assignment
    (we have 80,000 line item match by assignment which net to zero)
    Then SAVE
    Then I went to F.13
    input Co.code
    Select G/L accounts
    entered my G/L
    Selected Date from most recent document
    F8
    enter once I receive message of Production run
    No customer selected
    No vendor selected
    No G/L account documents selected
    No clearing procedures were carried out
    I don't understand what is missing here?
    Please help.

  • Clearing Payment Advices

    Hi
    In SAP when we are creating a credit memo it allows you to assign this credit to a debit.
    Once its assigned it created a payment advice with this credit and debit information.
    I know how to clear this manually. I use FB05 and enter the payment advice info and its cleared.
    But is there any way I can automate the process.
    This is not an incoming EDI 820 or any payment. This is just a payment advice created by a credit and  debit entry.
    Can I use the program RFAVIS40 to clear these? If so how should I define the posting rules.
    Thanks

    Hi,
    You can do it via OB74 and F.13
    Rest (uncleared) can be processed via program RFAVIS40.
    Regards,
    Gaurav

  • Automatic clearing for G/L account

    Hi Experts,
    the program is SAPF124, T-code is F.13.
    i have one requirment, please provide  valuable solutions....
    my object current functionality is the program checks tolerance limit and it will post this amt into perticular account.in this program it is checking tolerance limit (-25 to +25), it is posting amt between these limit only....
    But my business requirment is dont consider tolerance limit and it has to post to perticular account(how the sum is no matter).And it has to group the items based on reffrence number and currency....
    so please let me know the sol...where i have to change code in my program( i copied into zprogram).

    Bayantrade-
    Thanks to everyone who replied.  I am trying to test this in DEV however I am still getting the error message:
    No clearing procedures were carried out
    We are on ECC 6.0
    I did the following:
    Went to OB74 and input my GL Chart of account, Account type and the G/L in particular
    Then I input my Criteria 1 for ZUONR for assignment
    (we have 80,000 line item match by assignment which net to zero)
    Then SAVE
    Then I went to F.13
    input Co.code
    Select G/L accounts
    entered my G/L
    Selected Date from most recent document
    F8
    enter once I receive message of Production run
    No customer selected
    No vendor selected
    No G/L account documents selected
    No clearing procedures were carried out
    I don't understand what is missing here?
    Please help.

  • Suspens account automatic clearing

    Hello!
    I need to run an automatic clearing for a bank suspens account but my issue is that the payment document (from F110) and the bank transfer doesnt have fields in common. Asking the bank to change the assignment or text field is not an option for me....
    The only thing I found as connexion between these two documents is the text field from the bank transfer document which contains the document payment number BUT among more characters. Do you think it is possible to extract the document number from the text field and link it somehow with the automatic clearing OB74?
    I will appreciate any comment!
    Thank you in advance,
    REgards
    M

    Hi ,
    Can you go in FBl1n and fo mass change for assignemnt field. Then set rule for assignment field in OB74 and run F.13.
    or  do mass change for text field and do te settings in OB74 for yoru GL account .
    Many Thanks

  • Clearing of GL account

    I have a debit and credit to GL account which can be cleared . I still see them as Open(red light) . How can they be turned to cleared(green light). Why does this not ccur automatically or how can it be done?

    Hi,
    For carrying out automatic clearing of G/L Account, you need to configure that G/L in OB74 and define the criteria on which clearing should be done. After this config you need to assign an appropriate Sort Key in G/L Master so that system would use that field for clearing. Then you need to either create a background job for F.13 Transaction using that G/L Account.
    This way you can clear G/L line items automatically. Otherwise you can manually clear them using F-03 TCode.
    Regards,
    Sanjay

  • No clearing procedures were carried out( f.13)

    Hi Friends,
    I am clearing GL account by ususing F.13, but at the last i am getting error " No clearing procedures were carried out".
    IN OB74:
    i have maintained 1. CHA, 2.acct type, 3.account ( 2 to 9999999999) 4.Criteria(ZUONR) 5.(BELNR)
    Could you please tell me is there any  settings are missing in my confiq or could you please guide me whare should i check the settings apart from OB74
    Appreciate your early response and would be a great help to me.
    Regards
    Jay.

    The above items will never clear against each other.  Keep in mind that the F.13 program "groups" line items in an account (A SINGLE ACCOUNT!!!) according to the criteria that you specify in OB74 and when the balance in local and foreign currency is zero for that group, all of the line items in that group are cleared.  If I change your example as under, they will clear against each other.
    4500123 100 DR
    4500123 100 CR
    (these two open line items will clear against each other)
    or
    4500125 100 DR
    4500125 100 CR
    (these two open line items will clear against each other)

  • Vendor Account not getting automatically cleared using F.13 (OB74)

    Dear Sir / Mam,
    I want to clear vendor account open item based on assignment field.
    for this
    1. I configured OB74 as below
    YAIN     K     0     9999999999     ZUONR (where YAIN = COA)
    2. One of my vendor account # 300031 is appearing as below
    Assignment              DocumentNo      Type          Doc. Date          Amount in local cur.
    TestF.13                100000034            SA           17.02.2012                   275.00
    TestF.13                5100000266          RE            20.05.2010                   275.00-
    3. I executed T-Code F.13 and I selected CoCode, FY, Flagged Select Vendor Option & selected Vendor Account Number and executed in Production Run where in I am getting the following message.
    I  Program started by:           " CSPL
    I  Start date     " 17.02.2012  Start time     " 23:44:04
    S  No customer documents selected
    S  No G/L account documents selected
    I  Only accounts with debit and credit postings are included
    I  Stop date      " 17.02.2012  Stop time      " 23:44:05
    There after If i go and check the vendor account the open item are still open!
    I want to clear it through T-Code F.13 as I have mass documents be cleared like this.
    (Therefore I am not clearing it through F-44)
    Please guide me as where am I going wrong.
    Thanks In Anticipation
    Regards
    Chirag Shah

    Dear Jessica,
    In OB74,
    I have Put my chart of accounts - YAIN,
    Account type K,
    From / To accounts  as 0 to 99999999 (as they are numbered/charactered in the master record),
    criteria 1 is ZUONR.
    Account doesn't have Zero Balance but there are few line items with comman assignment text total of which is ZERO in Doc Currency (As I have shown in query)
    in F.13
    Clearing date is tried as 17-02-2012 as well as 18-02.2012
    Unticked Test run (= Production RUN)
    and executed.
    But still it shows the given below details, gives the same message and not clearing the line items.
        CoCd AccTy Account number   G/L           Open Items    Clrd Items
        1000 K     0000300031       0030021002            9             0       
    Thanks & Regards
    Chirag Shah

  • Clearing documents - F-03 and F-13

    Hi,
    during our recent archiving process, we've found several issues regarding documents that are in the system but can't be archived because they are not cleared. Our Treasury team launched a process to cover these documents and now we want to archive them, even if these documents doesn't have the debit and credit line.
    So my questions are:
    1)       Are you aware of a different use of F-03 to be able to go ahead and clear items without matching the debit entry and the credit entry?
    2)       What’s the use of tcode F.13?
    3)       Can you think of a way to mark these documents as cleared at line item different from F-03 or F.13?
    4)       Can you think of a way to flag these documents as ready for archiving even if they are not?
    Thanks!
    Edited by: Gustavo Castro on May 12, 2008 4:58 PM

    HI,
    F-03 is for clearing the GL manually. If the business wants to clear this is totally a manual process which may be a big task.
    F.13 is automatic clearing for GL/Customers/Vendors & GRIR.
    There should exist a common feild between Dr line items and credit line items. If you can Idenify a common feild and this feild can be mapped in OB74 then write a program to change th content of the feild identfied in Dr side and Cr Side and Update the documents first.
    Then Run F.13.
    Reward if useful.
    Sarma

  • GR/IR Clearing When to perform F.13/F.19 and MR11

    Dear,
    Can you pls explain GR/IR Clearing and its grouping, whats the process for GR/IR
    adjustments done?
    What is Grouping and Regroping?
    When to perform F.13/F.19 and MR11?
    I have read the threads discussed here on this topic, still I do not understand.
    Thanks All
    Krishna

    Hi
    When we execute SAP124 (F.13) with the flag "only documents which can be cleared" it will display in detailed list only those documents that can be cleared.
    If dont check this field it will generate a list even of documents that cannot be cleared.
    In this case in OB74 you have given ASSIGNMENT and INVOICE REFERENCE as the criteria.
    But what is probably happening is that the ASSIGNMENT is not matching in these documents and thus the system does not find
    the item suitable or rather eligible for clearing.
    If you check the documentation relative to the "Special processing of GR/IR clearing accounts" in SE38 -> SAPF124, you will find the following information:
    "If you set the GR/IR accounts special processing indicator: The program then automatically uses the EBELN and EBELP fields as well a as the XREF3 reference field as grouping criteria.
    This means that documents with the most recent posting date are initially ignored."
    So the system is checking these three fields for grouping the documents.
    For clearing GR/IR account it is not obligatory to set indicator GR/IR Account Special Processing. As described in note 546410 it can be more effective not use this indicator.
    Also read note 546410 and 574482 thoroughly.

  • OB74 Set up

    Hi,
    There was a wrong set up done in OB74 in my client system, they have selected WAERS and PRCTR for the account type S. Because of this setting ther has been wrong clearing right from the year 2007 for GR IR CLearing. Now there are huge amounts of open items uncleared under the GRIR accounts.
    I suppose that there must have been wrong clearing in the past years. Please let me know how to check and rectify it.
    Please let me know how to overcome this situation besides making the OB74 setup to ZUONR and VBUND. Thanks a lot for your help.
    Regards,
    S.Sumana.

    There is no need to reverse the cleared documents.
    You can test this in your sandbox system. (or testing client of your development system)
    Re: F.13 Clearing When Line Items Net to Zero
    Regards,
    Ravi

  • F.13 automatic clearing question and F-03 generate document question

    Hi Experts,
    I have two questions below.
    1. What's difference between F.13 and F-03?
        Due to when I use F.13 to automatic clearing GL account, we found out that the system generates docuemnt has content.
    (use Fb03, check the document number and found out the Dr and Cr account)
    But when I use F-03 to manual clearing GL account, but we found out the system generate  document has not any content.
    (Use FB03 to check the document number, but I cannot found out the Dr and Cr account)
    2.I intend to use F.13 to automatice clearing one GL account. My question is that whether the system could use FIFO to automatice clear document under matching condition.
    Regards,
    H.J.

    Hi,
    I follow up your suggestion to set rule of automatic clearin on OB74.
    Criteria 1 : ZUONR (Assignment field)
    Criteria 2 : GSBER (Business Area)
    Criteria : VBUND (Trading Partner)
    I had to set up the above criteria.
    how to add up (0.00) for setting?
    Regards,
    H.J.

  • F.13 for Customer and vendor

    Hi,
    Like GRIR clearing accounts can the Customer and vendors also automatically cleared? I have seen option in F.13. How is it possible to clear vendor and customer. I understand we made them in OB74 but how, i am confused about clearing criteria. What should i give in it.

    Dear:
             For customer or vendor clearing it is mandatory to have full payment . For customers you will need full recovery against invoice for automatic invoice RV clearance against its corresponding Payment DZ. Eg.
    Doc type      Assignment No         Amount
    RV               1701                         25000
    DZ               1701                         25000
    It will clear the customer invoice against payment based on the assignment number. For this you should book payment with reference to invoice number that is copied from SD using VTFA . Same rules applies for vendors clearance . Hope it will help you.
    Regards

Maybe you are looking for