OBB8 * New Field Percentage ( 3rd field )

I want to add a new field "Percentage" in OBB8
OBB8 -> Select any One  "Payment Term"  , say select  '0001' - > Click 'Details'
-> In 'payment terms' tab already 2  "Percentage "  fields are there , now I want to add a new field "Percentage" ( third field )
and which should reflet in respetive transations like F-28 , FB02 also...
***This is for Direct Payment method , not for installment method
How to do?
Ramesh.

TO SAP developer:
Finally I use Crystal report to rebuild Profit & Loss Statement (Income Statement) to satisfy company's requirement:
1. Show 2 Percentage column per Sales Amount for both Period Turn and YTD .
2. Not show Negative on non income account in the P&L statement report.
3. Add blank line after each "Total" row
4. Shorten the report pages
BR,
Michelle

Similar Messages

  • Creating new fields for UCCX 9.0 CUIC

    I am tryin to create a Contact Service Activity report for a customer and I have 2 problems.
    1st I have created a new field which I want to show the number of calls handled outsite of the Service Level.
    The formula I have created is SUM(${calls_handled})-SUM(${handle_sl_met}) this works fine for the totals, however I am getting the overall totals on every Service line . Within Edit Properties i have just put in (${calls_handled})-(${handle_sl_met}) thinking that would sort the individual service lines, however it is still showing the overall total number!
    The 2nd problem I have is that I want to run the same report so that it show multiple day summaries for each service.   
    Date        Serv         Off     Hand    Abnd
    3rd Oct  Cust Serv    25         23       2
    3rd Oct  Acounts      15         12       3
    4th Oct  Cust Serv    32         29       3
    4th Oct  Acounts      27         26       1
    When I run the report for start time 3/10/2013 to 4/10/2013  for entire range - grouping by start time - summarising daily.
    it show as follow
    Date        Serv         Off     Hand    Abnd
    3rd Oct  Cust Serv    57         52       5
    3rd Oct  Acounts      42         38       4
    Has anyone done this if so can you advise as it is now extremely urgent.
    Thanks Sarah

    Hi,
    from the UCCX 9.0(1) SRND:
    Cisco Unified Intelligence Center is the web-based reporting platform that is packaged as part of the Cisco Unified CCX 9.0(1).
    Regardless of license level (Premium, Enhanced or Standard), CUIC is there, on the same server.
    Not sure if you can install it or move it to a separate server - I guess the answer is no.
    About the licenses: you'll have to decide whether you'll be able to use the full feature set (if you need HTTP applications, Databases, custom Java classes, then go Premium), or not (then it's either Enhanced or Standard). Again, CUIC will be there, with unlimited users.
    About HA - if you mean High Availability, UCCX supports that, out of the box, it's actually an active-inactive server pair. You'll need a separate license for that, too, as far as I know.
    Good alternatives to CUIC: personally, I prefer BIRT. But there's a long list of reporting platforms. Some SQL knowledge is a plus.
    Hint: the SRND is a great way to start. The amount of information there might be overwhelming, but all the details are supposed to be there.
    G.
    Message was edited by: Gergely Szabo
    A list can't be wide.

  • I am new in DART extract and  wanted add the new field in Existing Segement

    Hi ALL
    I am new in DART extract and client is request us to add the new field in Existing Segment.
    What is proceedure i need to follow to add the new field in existing segment.
    Moderator: Please, post in proper forum

    I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server.   In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4".  If I run this from any browser it works.  So what do you think I have done wrong?

  • Added new field to cube but data not passed from DSO

    Hope someone can help.
    (BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

    hi peter,
    Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
    I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
    Regards,
    Frank

  • Error while adding a new field to the Segment in we31

    Hi ,
    I am getting error when i am trying to add the new field to the cust. segment.
    It is released for the adding the new fields i am cancelling the release , but i got a message like this
    Error while resetting release of segment 'segment name'.
    it is comming from the message class EA and message number 259.
    Thanks in advance.
    Reagrds,
    bharani

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • AET error while creating a new field

    Hi Experts,
    We have a requirement to create a check box/newfield on Account Details screen in Web UI. I am trying to create a new field using AET but am getting the following error message. Please help.
    1. Error during generation of object CI_EEW_BUT000
    2. Customizable CSOL conflict for objects changed in other TR.
    We have a config TR involving the role field on account details component (BP_HEAD/ACCOUNTDETAILS). Do we need to release the transport before creating any new fields.
    The generation of the field fails when I select the extension and click on 'SAVE and GENERATE'.
    Please help.
    Thanks,
    Rohit

    Hello Rohit,
    Please  apply note 1707978 to solve the issue.
    thanks
    Willie

  • How to find out the user who has created  a new field in the custom table.

    How to find out the user details who has created  a new field in the custom table.
    Thanks,
    Joan

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • Creation of new fields for business partner relationship

    Hi experts,
    We are currently on SAP CRM 7.0 EHP1.
    We have a requirement to maintain a custom checkbox (Relevant for business) on each business partner relationship.
    Can you please let us know on how we can achive this requirement.
    Thanks in advance,
    Vamsi.
    Moderation: Duplicated. I lock this one and continue here: [Create a new field in Business Partner Relationships|Create a new field in Business Partner Relationships#10795912]
    Edited by: Joaquin Fornas on Nov 8, 2011 12:17 PM

    Please, anyone can help?
    Thanks!!

  • Populating marketing attribute of bp in new field created by eew in crm

    Hi all,
        I have created new field in transaction types(lead opp, quotation and order) through eew.
        how do i populate a value of a marketing attribute that i have maintained for a business partner(TABLE for marketing attribute:- AUSP) in the new fields created in all the transaction types.
        Can anyone help me in how to achieve this as it is an high priority issue for me?
        I have tried doing by writing a code in pbo of the screen in which fields are created but it gives me a dump at item level if item is maintained otherwise it works but item is compulsary.
    Regards,
    Rahul

    Hi Rahul,
    Check the BADI 'CRM_CUSTOMER_H_BADI'
    Implement the method 'CRM_CUSTOMER_H_MERGE'
    First of all select the data from the table.
    Fill in the appropriate corresponding field in the structure 'CS_CUSTOMER_H_BADI',of the method, with the data extacted. Finally(very important), In the table 'IT_INPUT_FIELD_NAMES', of the method, append a line with the field FIELDNAME containing the name of the field in the Customer_h structure and field CHANGEABLE containing space.
    I think this should solve your problem.

  • Creation of new fields under sales tab in XD01

    Hello,
    I have to create a new field under the sales tab in XD01. Please let me know how i can do this? or is there any other way of adding the new fields to the customer master..
    Thank You!!!!
    Suresh

    Hi,
    you can add to fields with customizing a cross the below path:
    Financial accounting/accounts receivable and accounts payable/customer accounts/master data/define screen per activity (customers),
    but i dont know how add new fields,
    regards,
    David

  • Creation of new field

    Hi Alll,
    Can you give me some help in this area---
    Requirement is 5 decimals in amot which i cant go with std sap------(Ie. I cant go with chnages in global settings)
    I want chnage the field KONP-KBERT) as with 5 decimal
    if its not possible can we make one new field instead og KBERT like ZBERT with 5 decimal and we also should be ale to display only ZBERT not KBERT
    Regards
    ishikesh

    First you should ask why amount is required in 5 decimal places.  Anything is possible to do in ABAP but we need to see if it is worth doing it

  • Creation of new field in Web Page

    Hi All,
    i am new in SAP CRM 2007. i wanted to add one field therefore i went to EEWB and try to create one extension. In extension i have enter all fields like Name, Description, EEW Bus. Object and Extension Type when i click on continue system is giving error that is "No request was sent" (No request was sent through the interface).
    please tell me how to solve this error???
    Thanks & Regards,
    RAJ

    Hi Raj,
    Check if you have followed the below steps:
    -While creating new project in EEWB you Need to enter existing package then you will get transport request Dialog box .
    -Click on create on continue which will then create the project.
    -Then right click on Project create extesion.You must select EEW Bus Object and Extension Type Header or Item level.
    -Then you will get the Wizzard and assign Transaction TYpe while proceeding in Wizzard.
    -In define field you must maintain the data type i.e Character or check box
    -In assign field must check header or Item and assign the subbobject and continue.
    It may take some time but will create a new field.
    Regds
    Arup

  • Creation of New field in Relationship block of contact page

    Hi,
    I have created a new field as value attribute in Relationship block of contact overview page. Since both AET and EEWB did not allow creation of the field as part of BUT051 I had to create value atribute. I have custom logic for the field. Can you please let me know how I can populate the field.
    Thanks,
    JC

    Hi JC,
    The context node that you are using is a mixed node, so from this node you need to get value node so that you can cast the value into cl_bsp_wd_value_node.
    Here's the sample code for getter and setter method of that attribute:
    DATA:
       lr_mixed TYPE REF TO cl_bsp_wd_mixed_node,
       lr_value_node TYPE REF TO cl_bsp_wd_value_node.
    lr_mixed ?= current  or lr_mixed ?= iterator. " use either of the code i dont have system right now
    lr_value_node ?=  lr_mixed_node->if_bsp_wd_ext_property_access~get_value_node( ).
    Here, from lr_value_node get the property access method and set the attribute value to VALUE parameter.
    Thats it
    Thanks,
    Bhushan

  • How to populate the new field of R/3 in BW

    Hi,
    There was a requirement to modify the sap screen in the R/3.
    For the same a new field is created which populate the data via a table in R/3.
    Now I have to populate the same field in BW. I am working on 3.5 Version.
    In R/3 I have a data source and I am not able to see the same available in the data source
    The field is available in the extract structure but I am unable to populate the same in the data source.
    Kindly help.

    The Data Source is picked from the FM.
    Also,my requirement is to display the text values for the new field
    I am going to create a Generic Master Data which will fetch the data from the table which has fields (Code, Langu and the text) and replicate the same to BW.
    Now to populate the code in BW, I need to have the field in the data source and from there I can add the same code field in the bw comm/tran/etc...
    The code is available in the Extraction and not in the data source.
    At the reporting level I will extract the report based on key and text.
    I tried using ROOSFIELD to populate the field in the datasource, but I am not able to do the same.

  • BADI /SAPAPO/AM_ALERTLIST - How to fill values in new field catalogue

    Hi,
    I need some help for passing values into the field Catalog of an ALERT Monitor.
    The requirement is to add new fields in the ALERT Monitor and then populate them with values form the PRODUCT view.
    I have implemented method MODIFY_ALERTLIST of BADI /SAPAPO/AM_ALERTLIST. I am able to add the new columns but I am unable to add the values. Actually while debugging i found that even though the NEW values are going into the table T_ALERTS, but the space between the New Added values and the original value is HUGE. Therefore when the Field Catalog is displayed in the Alert Monitor, the NEW Values are not shown.
    I am attaching my Code
      DATA: l_table_ref TYPE REF TO data,
      l_table_ref_1 TYPE REF TO data,
      l_fieldcat_str TYPE /sapapo/am_aot_fieldcat_str,
      ls_fieldcat TYPE LINE OF lvc_t_fcat,
      ls_t_fieldcat LIKE LINE OF t_fieldcat,
      l_alert_str TYPE LINE OF /sapapo/alert_tab,
      l_str_ref TYPE REF TO data,
      l_str_ref_1 TYPE REF TO data.
      FIELD-SYMBOLS: <aot_tab> TYPE STANDARD TABLE,
      <aot_tab_1> TYPE STANDARD TABLE,
      <alert_str> TYPE /sapapo/alert_str,
      <aot_str> TYPE ANY,
      <alert_str1> TYPE c,
      <alert_str_uc> TYPE c.
      FIELD-SYMBOLS: <zat103> TYPE c. "ANY.
      DATA : l_col_pos TYPE i,
      gv_entries TYPE i,
      xlength TYPE i.
      FIELD-SYMBOLS : <info> TYPE ANY,
                      <aot_str1> TYPE ANY.
      DATA olen1 TYPE i.
      DATA: t_pegid TYPE STANDARD TABLE OF /sapapo/amopegid_tab,
            t_ordid TYPE STANDARD TABLE OF /sapapo/amoordid_tab.
      CLEAR: l_alert_str,
        l_table_ref ,
        l_table_ref_1 ,
        l_fieldcat_str ,
        ls_fieldcat ,
        ls_t_fieldcat ,
        l_str_ref  .
    *Add new column
      READ TABLE t_fieldcat INTO ls_t_fieldcat INDEX 1.
      DATA: x1 TYPE lvc_t_fcat,
           y1 LIKE LINE OF x1.
      x1 = ls_t_fieldcat-fieldcat.
      LOOP AT x1 INTO y1 WHERE reptext NE space.
        CHECK y1-fieldname NE 'DELIVERY_DATE'.
        xlength = xlength + y1-intlen.
      ENDLOOP.
      DESCRIBE TABLE  x1 LINES gv_entries.
    Appending Delivery Date
      ls_fieldcat-col_pos = gv_entries + 1.
      ls_fieldcat-fieldname = 'DELIVERY_DATE'.
      ls_fieldcat-ifieldname = 'DELIVERY_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Delivery Date'.
      ls_fieldcat-outputlen = '10'.
    ls_fieldcat-rollname = '/SAPAPO/DELIVERY_DATE' . "'DATS'.
      ls_fieldcat-domname = '/SAPAPO/CHAR20'."'/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Delivery Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Start Date
      ls_fieldcat-col_pos = gv_entries + 2.
      ls_fieldcat-fieldname = 'STARTDAT'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Start Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Start Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Required Shelf Life Date
      ls_fieldcat-col_pos = gv_entries + 3.
      ls_fieldcat-fieldname = 'SL_MIN_DAT'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Req.SL dte'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Req.SL dte'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Shelf Life Date/Required Maximum Shelf life Date
      ls_fieldcat-col_pos = gv_entries + 4.
      ls_fieldcat-fieldname = 'SL_MAX_DAT'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'SL Date 2'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'SL Date 2'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending (Availability/Requirements) Date of a Schedule Line
      ls_fieldcat-col_pos = gv_entries + 5.
      ls_fieldcat-fieldname = 'AVL_REQ_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Schedule Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Schedule Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Req Date/ Shipment end date
      ls_fieldcat-col_pos = gv_entries + 6.
      ls_fieldcat-fieldname = 'SHIP_MAX_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Req Date/ Shipment end date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Req Date/ Shipment end date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Expected Grading Date
      ls_fieldcat-col_pos = gv_entries + 7.
      ls_fieldcat-fieldname = 'GRAD_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Expected Grading Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Expected Grading Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Available Date
      ls_fieldcat-col_pos = gv_entries + 8.
      ls_fieldcat-fieldname = 'AVAIL_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Available Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Available Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
      MODIFY TABLE t_fieldcat FROM ls_t_fieldcat.
      DATA lvc_t_fcat TYPE lvc_t_fcat.
    *CODE FOR ADDING THE NEW VALUES*
    ASSIGN Alert Structure to Field Symbols for Unicode
      ASSIGN COMPONENT 0 OF STRUCTURE l_alert_str
                         TO            <alert_str>           CASTING.
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = ls_t_fieldcat-fieldcat
        IMPORTING
          ep_table        = l_table_ref.
    *assign dynamic structure
      ASSIGN l_table_ref->* TO <aot_tab>.
      CREATE DATA l_str_ref LIKE LINE OF <aot_tab>.
      ASSIGN l_str_ref->* TO <aot_str>.
      ASSIGN l_str_ref->* TO <alert_str_uc> CASTING.
      LOOP AT t_alerts INTO l_alert_str.
       READ TABLE t_fieldcat WITH KEY aot = l_alert_str-aot
       INTO l_fieldcat_str.
       CALL FUNCTION '/SAPAPO/ATAB_FIELDCAT_GET'
         EXPORTING
           aot        = l_fieldcat_str-aot
           mview      = l_fieldcat_str-mview
         IMPORTING
           table_ref  = l_table_ref
           t_fieldcat = lvc_t_fcat.
        ASSIGN l_alert_str TO <alert_str>.
    *copy alert to aot-specific structure
        MOVE <alert_str>-info TO <alert_str_uc>.
    *Write this code inside the loop
        ASSIGN COMPONENT 'DELIVERY_DATE' OF STRUCTURE <aot_str> TO <zat103>.  "CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'STARTDAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'SL_MIN_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'SL_MAX_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'AVL_REQ_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'SHIP_MAX_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'GRAD_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'AVAIL_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        MOVE <alert_str_uc> TO <alert_str>-info.
        MODIFY t_alerts FROM l_alert_str INDEX sy-tabix.
        CLEAR : <alert_str>, <alert_str_uc>.
      ENDLOOP.
    I have even tried Concatenating Values,  with that method even though the NEW Values are available but they do not fall under the correct Column.
    PLEASE help me out cos I am really Stuck.
    Regards
    Abhishek Sahi

    Hi,
    I need some help for passing values into the field Catalog of an ALERT Monitor.
    The requirement is to add new fields in the ALERT Monitor and then populate them with values form the PRODUCT view.
    I have implemented method MODIFY_ALERTLIST of BADI /SAPAPO/AM_ALERTLIST. I am able to add the new columns but I am unable to add the values. Actually while debugging i found that even though the NEW values are going into the table T_ALERTS, but the space between the New Added values and the original value is HUGE. Therefore when the Field Catalog is displayed in the Alert Monitor, the NEW Values are not shown.
    I am attaching my Code
      DATA: l_table_ref TYPE REF TO data,
      l_table_ref_1 TYPE REF TO data,
      l_fieldcat_str TYPE /sapapo/am_aot_fieldcat_str,
      ls_fieldcat TYPE LINE OF lvc_t_fcat,
      ls_t_fieldcat LIKE LINE OF t_fieldcat,
      l_alert_str TYPE LINE OF /sapapo/alert_tab,
      l_str_ref TYPE REF TO data,
      l_str_ref_1 TYPE REF TO data.
      FIELD-SYMBOLS: <aot_tab> TYPE STANDARD TABLE,
      <aot_tab_1> TYPE STANDARD TABLE,
      <alert_str> TYPE /sapapo/alert_str,
      <aot_str> TYPE ANY,
      <alert_str1> TYPE c,
      <alert_str_uc> TYPE c.
      FIELD-SYMBOLS: <zat103> TYPE c. "ANY.
      DATA : l_col_pos TYPE i,
      gv_entries TYPE i,
      xlength TYPE i.
      FIELD-SYMBOLS : <info> TYPE ANY,
                      <aot_str1> TYPE ANY.
      DATA olen1 TYPE i.
      DATA: t_pegid TYPE STANDARD TABLE OF /sapapo/amopegid_tab,
            t_ordid TYPE STANDARD TABLE OF /sapapo/amoordid_tab.
      CLEAR: l_alert_str,
        l_table_ref ,
        l_table_ref_1 ,
        l_fieldcat_str ,
        ls_fieldcat ,
        ls_t_fieldcat ,
        l_str_ref  .
    *Add new column
      READ TABLE t_fieldcat INTO ls_t_fieldcat INDEX 1.
      DATA: x1 TYPE lvc_t_fcat,
           y1 LIKE LINE OF x1.
      x1 = ls_t_fieldcat-fieldcat.
      LOOP AT x1 INTO y1 WHERE reptext NE space.
        CHECK y1-fieldname NE 'DELIVERY_DATE'.
        xlength = xlength + y1-intlen.
      ENDLOOP.
      DESCRIBE TABLE  x1 LINES gv_entries.
    Appending Delivery Date
      ls_fieldcat-col_pos = gv_entries + 1.
      ls_fieldcat-fieldname = 'DELIVERY_DATE'.
      ls_fieldcat-ifieldname = 'DELIVERY_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Delivery Date'.
      ls_fieldcat-outputlen = '10'.
    ls_fieldcat-rollname = '/SAPAPO/DELIVERY_DATE' . "'DATS'.
      ls_fieldcat-domname = '/SAPAPO/CHAR20'."'/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Delivery Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Start Date
      ls_fieldcat-col_pos = gv_entries + 2.
      ls_fieldcat-fieldname = 'STARTDAT'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Start Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Start Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Required Shelf Life Date
      ls_fieldcat-col_pos = gv_entries + 3.
      ls_fieldcat-fieldname = 'SL_MIN_DAT'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Req.SL dte'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Req.SL dte'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Shelf Life Date/Required Maximum Shelf life Date
      ls_fieldcat-col_pos = gv_entries + 4.
      ls_fieldcat-fieldname = 'SL_MAX_DAT'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'SL Date 2'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'SL Date 2'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending (Availability/Requirements) Date of a Schedule Line
      ls_fieldcat-col_pos = gv_entries + 5.
      ls_fieldcat-fieldname = 'AVL_REQ_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Schedule Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Schedule Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Req Date/ Shipment end date
      ls_fieldcat-col_pos = gv_entries + 6.
      ls_fieldcat-fieldname = 'SHIP_MAX_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Req Date/ Shipment end date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Req Date/ Shipment end date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Expected Grading Date
      ls_fieldcat-col_pos = gv_entries + 7.
      ls_fieldcat-fieldname = 'GRAD_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Expected Grading Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Expected Grading Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
    Appending Available Date
      ls_fieldcat-col_pos = gv_entries + 8.
      ls_fieldcat-fieldname = 'AVAIL_DATE'.
      ls_fieldcat-tabname = '1'.
      ls_fieldcat-seltext = 'Available Date'.
      ls_fieldcat-outputlen = '10'.
      ls_fieldcat-rollname = 'DATS'.
      ls_fieldcat-domname = '/SAPAPO/DATUM'.
      ls_fieldcat-coltext = 'Available Date'.
      APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
      MODIFY TABLE t_fieldcat FROM ls_t_fieldcat.
      DATA lvc_t_fcat TYPE lvc_t_fcat.
    *CODE FOR ADDING THE NEW VALUES*
    ASSIGN Alert Structure to Field Symbols for Unicode
      ASSIGN COMPONENT 0 OF STRUCTURE l_alert_str
                         TO            <alert_str>           CASTING.
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = ls_t_fieldcat-fieldcat
        IMPORTING
          ep_table        = l_table_ref.
    *assign dynamic structure
      ASSIGN l_table_ref->* TO <aot_tab>.
      CREATE DATA l_str_ref LIKE LINE OF <aot_tab>.
      ASSIGN l_str_ref->* TO <aot_str>.
      ASSIGN l_str_ref->* TO <alert_str_uc> CASTING.
      LOOP AT t_alerts INTO l_alert_str.
       READ TABLE t_fieldcat WITH KEY aot = l_alert_str-aot
       INTO l_fieldcat_str.
       CALL FUNCTION '/SAPAPO/ATAB_FIELDCAT_GET'
         EXPORTING
           aot        = l_fieldcat_str-aot
           mview      = l_fieldcat_str-mview
         IMPORTING
           table_ref  = l_table_ref
           t_fieldcat = lvc_t_fcat.
        ASSIGN l_alert_str TO <alert_str>.
    *copy alert to aot-specific structure
        MOVE <alert_str>-info TO <alert_str_uc>.
    *Write this code inside the loop
        ASSIGN COMPONENT 'DELIVERY_DATE' OF STRUCTURE <aot_str> TO <zat103>.  "CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'STARTDAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'SL_MIN_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'SL_MAX_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'AVL_REQ_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'SHIP_MAX_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'GRAD_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        ASSIGN COMPONENT 'AVAIL_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
        IF sy-subrc = 0.
          CLEAR <zat103>.
    *Fetch ur own custom value and move to the field symbol. This
    *dynamically populates ur structure.
          <zat103> = '22.11.1999'.
        ENDIF.
        MOVE <alert_str_uc> TO <alert_str>-info.
        MODIFY t_alerts FROM l_alert_str INDEX sy-tabix.
        CLEAR : <alert_str>, <alert_str_uc>.
      ENDLOOP.
    I have even tried Concatenating Values,  with that method even though the NEW Values are available but they do not fall under the correct Column.
    PLEASE help me out cos I am really Stuck.
    Regards
    Abhishek Sahi

Maybe you are looking for

  • Annotation-Processing Using Custom ClassLoader Fails

    Hi, I have the following problem concerning annotations. I am using Jaxb2 to marshal some classes and Jaxb relies heavily on processing annotation information contained in them. If I put the Jaxb JAR's directly in the classpath everything works fine.

  • How to change bucket capacity for a certain date range (duration)?

    Hi, I need to update the bucket capacities of Resource at Vendor location in APO live cache for a particular period using BAPI_RSSRVAPS_CHANGEMULTI. Here I am executing BAPI by passing - Import Parameters: LOGICAL_SYSTEM COMMIT_CONTROL PLANNING_VERSI

  • Is Translation Hub available on Linux ? [SOLVED]

    We are using iDS 10gR2 and iAS 10gR2 on Linux. Is Translation Hub available in iDS 10gR2 on Linux? or is it only available for Windows? I can not find it under my iDS installation? I also can not find the Translation Hub documentation under iDS docum

  • Observable/observer nightmare

    I'm currently simulating a robot with a graphical front end linked to a model using a model-view architecture. In fact there are two views running in parallel: a graphical representation and a set of JLabels displaying parameters of the model as they

  • Where to find Oracle Apps HR schema table structures?

    Hi! Can someone guide me to the link where I can find the HR schema table structures for Oracle E-Biz suite 11.5.10? Previously, i used to get them under Top Tech Docs on the metalink. Thanks and regards, Aparna