OBDC Connectivity for 10gR2
Hi All,
This following is the email that I got from my customer. Can any one help me out with his question.
Question: As we have found out from Oracle that the HS-ODBC (a.k.a.generic connectivity) functionality for 10gR2 does not work under EM64T, on Windows 2003 64 bit Server, and a large number of clients may be using this component, I am wondering if Oracle Corp has done any impact study. Also, can we have an alternate solution till they get a fix on this?
Any help on this question is really helpful for me.
With Regards
Phanish
They say that it is going to be supported in version 11. You can setup HSODBC on some other machine, and then point your servers at that listener rather than the local machine.
-J
Similar Messages
-
Generic Connectivity -Oracle(10gR2) to MS SQL server - Creating DSN
Hi,
I am trying to connect Oracle 10gR2(10.2.0.4.0) on linux x86 to MS Sql Server on Windows XP
I am referring the Metalink Note 264567.1 and using DataDirect ODBC drivers for the same
I have a question here
Do I need to create the System DSN on windows XP or on Oracle (linux server)?
If it is on linux server, how to I create the System DSN on the Linux?
Thanks in Advance
Regards,
PkHi,
You need to create a DSN on the box where the HSODBC (the oracle db) is running, so in this case the Linux box.
I'd assume there's documentation that comes with the 3rd party odbc driver on how to create a DSN with it. It probably depends on which version of driver manager you're using (pardon my ignorance, I do strictly Windows) so you'd probably want to check the docs for the driver manager. For example, if using unixODBC, the docs are on [their web site|http://www.unixodbc.org/].
Hope it helps,
Greg -
Hi I am using a OBDC connection to connect to our DB. I need to filter my employee list based on if they are active or not.
I tried a SQL statement but I seem to be able to only draw on the data from tables. Queries wont work.
I can see the Employees table and select names but I want to prefilter only active employees.
Thanksuser575089 wrote:
sabre150 wrote:
Iterate through the list looking for students that are active and add them to a new list.I'm worried about time complexity and hence I posted ....because I'll be doing such filtration for couple of lists .To check each student you have to visit each student O(N). To create a list you have to create a new list ad add each active student to it.
How big are the lists and how often do you have to do this filtering.
>
Is there any other approach to think about in java side ?I can think of slower methods! i.e. clone() a list then iterate through the clone() removing ones that are not active. -
Getting Error:closing a connection for you. Please help
Hello All,
I'm using jboss3.2.6. I used ejb2.1 (session bean and entity bean[BMP]). I did few data base transations in cmp and few in simple data source connection.
I'm getting below errors occasionally
'No managed connection exception
java.lang.OutOfMemoryError: Java heap space
[CachedConnectionManager] Closing a connection for you. Plea
se close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@11ed0d
5
I've given below my dao connection code here,
package com.drtrack.util;
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
public class DAOUtil {
private static DataSource _ds;
public Connection con;
public DAOUtil() throws SQLException {
try {
if (_ds == null)
assemble();
if(_ds != null && con == null) {
con = _ds.getConnection();
}catch(SQLException ex) {
ex.printStackTrace();
private void assemble() {
Context ic = null;
try {
ic = new InitialContext();
DrTrackUtil drutil = new DrTrackUtil();
_ds = (DataSource) ic.lookup("java:/" + drutil.getText("SOURCE_DIR"));
drutil = null;
}catch (Exception e) {
e.printStackTrace();
}finally {
try {
ic.close();
}catch(NamingException ne) {}
public void closeConnection() throws SQLException {
if(con != null)
con.close();
con = null;
}below is the code with get connection and doing transaction in it.
public static AccountMasterValueBean getAccountMasterByAcctId(String acctId) {
AccountMasterValueBean bean = null;
DAOUtil dao = null;
CallableStatement cst = null;
ResultSet rs = null;
try {
dao = new DAOUtil();
cst = dao.con.prepareCall(DrTrackConstants.MSSQL_USP_ACCOUNTMASTER_BY_ACCTID);
cst.setObject(1, acctId);
rs = cst.executeQuery();
if(rs != null && rs.next()) {
bean = new AccountMasterValueBean(
Integer.valueOf(rs.getString("accountkeyid")),
rs.getString("latitude"),
rs.getString("longitude"));
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
if(rs != null){
try {
rs.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
rs = null;
if(cst != null) {
try{
cst.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
cst = null;
if(dao != null) {
try {
dao.closeConnection();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
dao = null;
return bean;
}I closed connections, resultsets and statements properly.
Why I'm getting these errors.? Where I'm doing wrong. ? Please help me. I have to fix them ASAP.
Thanks.Hello All,
I'm using jboss3.2.6. I used ejb2.1 (session bean and entity bean[BMP]). I did few data base transations in cmp and few in simple data source connection.
I'm getting below errors occasionally
'No managed connection exception
java.lang.OutOfMemoryError: Java heap space
[CachedConnectionManager] Closing a connection for you. Plea
se close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@11ed0d
5
I've given below my dao connection code here,
package com.drtrack.util;
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
public class DAOUtil {
private static DataSource _ds;
public Connection con;
public DAOUtil() throws SQLException {
try {
if (_ds == null)
assemble();
if(_ds != null && con == null) {
con = _ds.getConnection();
}catch(SQLException ex) {
ex.printStackTrace();
private void assemble() {
Context ic = null;
try {
ic = new InitialContext();
DrTrackUtil drutil = new DrTrackUtil();
_ds = (DataSource) ic.lookup("java:/" + drutil.getText("SOURCE_DIR"));
drutil = null;
}catch (Exception e) {
e.printStackTrace();
}finally {
try {
ic.close();
}catch(NamingException ne) {}
public void closeConnection() throws SQLException {
if(con != null)
con.close();
con = null;
}below is the code with get connection and doing transaction in it.
public static AccountMasterValueBean getAccountMasterByAcctId(String acctId) {
AccountMasterValueBean bean = null;
DAOUtil dao = null;
CallableStatement cst = null;
ResultSet rs = null;
try {
dao = new DAOUtil();
cst = dao.con.prepareCall(DrTrackConstants.MSSQL_USP_ACCOUNTMASTER_BY_ACCTID);
cst.setObject(1, acctId);
rs = cst.executeQuery();
if(rs != null && rs.next()) {
bean = new AccountMasterValueBean(
Integer.valueOf(rs.getString("accountkeyid")),
rs.getString("latitude"),
rs.getString("longitude"));
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
if(rs != null){
try {
rs.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
rs = null;
if(cst != null) {
try{
cst.close();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
cst = null;
if(dao != null) {
try {
dao.closeConnection();
}catch(SQLException se) {
logger.info("SQL Error: " + se);
finally {
dao = null;
return bean;
}I closed connections, resultsets and statements properly.
Why I'm getting these errors.? Where I'm doing wrong. ? Please help me. I have to fix them ASAP.
Thanks. -
How do I set miminum # of connections for pool with Oracle and Tomcat?
Hi,
I can't seem to find any attribute to initialize the number of connections for my connection pool. Here is my current context.xml file under my /App1 directory:
<Context path="/App1" docBase="App1"
debug="5" reloadable="true" crossContext="true">
<Resource name="App1ConnectionPool" auth="Container"
type="oracle.jdbc.pool.OracleDataSource"
driverClassName="oracle.jdbc.driver.OracleDriver"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@127.0.0.1:1521:oddjob"
user="app1" password="app1" />
</Context>
I've been googling and reading forums, but haven't found a way to establish the minimum number of connections. I've tried all sorts of parameters like InitialLimit, MinLimit, MinActive, etc, with no success.
Here is some sample code that I am testing:
package web;
import oracle.jdbc.pool.OracleDataSource;
import oracle.jdbc.OracleConnection;
import javax.naming.*;
import java.sql.SQLException;
import java.sql.ResultSet;
import java.sql.Statement;
import java.util.Properties;
public class ConnectionPool {
String message = "Not Connected";
public void init() {
OracleConnection conn = null;
ResultSet rst = null;
Statement stmt = null;
try {
Context initContext = new InitialContext();
Context envContext = (Context) initContext.lookup("java:/comp/env");
OracleDataSource ds = (OracleDataSource) envContext.lookup("App1ConnectionPool");
message = "Here.";
String user = ds.getUser();
if (envContext == null)
throw new Exception("Error: No Context");
if (ds == null)
throw new Exception("Error: No DataSource");
if (ds != null) {
message = "Trying to connect...";
conn = (OracleConnection) ds.getConnection();
Properties prop = new Properties();
prop.put("PROXY_USER_NAME", "adavey/xxx");
if (conn != null) {
message = "Got Connection " + conn.toString() + ", ";
conn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME,prop);
stmt = conn.createStatement();
rst = stmt.executeQuery("SELECT username, server from v$session where username is not null");
while (rst.next()) {
message = "DS User: " + user + "; DB User: " + rst.getString(1) + "; Server: " + rst.getString(2);
rst.close();
rst = null;
stmt.close();
stmt = null;
conn.close(); // Return to connection pool
conn = null; // Make sure we don't close it twice
} catch (Exception e) {
e.printStackTrace();
} finally {
// Always make sure result sets and statements are closed,
// and the connection is returned to the pool
if (rst != null) {
try {
rst.close();
} catch (SQLException e) {
rst = null;
if (stmt != null) {
try {
stmt.close();
} catch (SQLException e) {
stmt = null;
if (conn != null) {
try {
conn.close();
} catch (SQLException e) {
conn = null;
public String getMessage() {
return message;
I'm using a utility to repeatedly call a JSP page that uses this class and displays the message variable. This utility allows me to specify the number of concurrent web requests and an overall number of requests to try. While that is running, I look at V$SESSION in Oracle and occassionaly, I will see a brief entry for app1 or adavey depending on the timing of my query and how far along the code has processed in this example. So it seems that I am only using one connection at a time and not a true connection pool.
Is it possible that I need to use the oci driver instead of the thin driver? I've looked at the javadoc for oci and the OCIConnectionPool has a setPoolConfig method to set initial, min and max connections. However, it appears that this can only be set via Java code and not as a parameter in my context.xml resource file. If I have to set it each time I get a database connection, it seems like it sort of defeats the purpose of having Tomcat maintain the connection pool for me and that I need to implement my own connection pool. I'm a newbie to this technology so I really don't want to go this route.
Any advice on setting up a proper connection pool that works with Tomcat and Oracle proxy sessions would be greatly appreciated.
Thanks,
AlanWell I did some more experiments and I am able to at least create a connection pool within my example code:
package web;
import oracle.jdbc.pool.OracleDataSource;
import oracle.jdbc.OracleConnection;
import javax.naming.*;
import java.sql.SQLException;
import java.sql.ResultSet;
import java.sql.Statement;
import java.util.Properties;
public class ConnectionPool {
String message = "Not Connected";
public void init() {
OracleConnection conn = null;
ResultSet rst = null;
Statement stmt = null;
try {
Context initContext = new InitialContext();
Context envContext = (Context) initContext.lookup("java:/comp/env");
OracleDataSource ds = (OracleDataSource) envContext.lookup("App1ConnectionPool");
message = "Here.";
String user = ds.getUser();
if (envContext == null)
throw new Exception("Error: No Context");
if (ds == null)
throw new Exception("Error: No DataSource");
if (ds != null) {
message = "Trying to connect...";
boolean cache_enabled = ds.getConnectionCachingEnabled();
if (!cache_enabled){
ds.setConnectionCachingEnabled(true);
Properties cacheProps = new Properties();
cacheProps.put("InitialLimit","5");
cacheProps.put("MinLimit","5");
cacheProps.put("MaxLimit","10");
ds.setConnectionCacheProperties(cacheProps);
conn = (OracleConnection) ds.getConnection();
Properties prop = new Properties();
prop.put("PROXY_USER_NAME", "adavey/xyz");
if (conn != null) {
message = "Got Connection " + conn.toString() + ", ";
conn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME,prop);
stmt = conn.createStatement();
//rst = stmt.executeQuery("SELECT 'Success obtaining connection' FROM DUAL");
rst = stmt.executeQuery("SELECT user, SYS_CONTEXT ('USERENV', 'SESSION_USER') from dual");
while (rst.next()) {
message = "DS User: " + user + "; DB User: " + rst.getString(1) + "; sys_context: " + rst.getString(2);
message += "; Was cache enabled?: " + cache_enabled;
rst.close();
rst = null;
stmt.close();
stmt = null;
conn.close(OracleConnection.PROXY_SESSION); // Return to connection pool
conn = null; // Make sure we don't close it twice
} catch (Exception e) {
e.printStackTrace();
} finally {
// Always make sure result sets and statements are closed,
// and the connection is returned to the pool
if (rst != null) {
try {
rst.close();
} catch (SQLException e) {
rst = null;
if (stmt != null) {
try {
stmt.close();
} catch (SQLException e) {
stmt = null;
if (conn != null) {
try {
conn.close();
} catch (SQLException e) {
conn = null;
public String getMessage() {
return message;
In my context.xml file, I tried to specify the same Connection Cache Properties as attributes, but no luck:
<Context path="/App1" docBase="App1"
debug="5" reloadable="true" crossContext="true">
<Resource name="App1ConnectionPool" auth="Container"
type="oracle.jdbc.pool.OracleDataSource"
driverClassName="oracle.jdbc.OracleDriver"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@127.0.0.1:1521:oddjob"
user="app1" password="app1"
ConnectionCachingEnabled="1" MinLimit="5" MaxLimit="20"/>
</Context>
These attributes seemed to have no effect:
ConnectionCachingEnabled="1" ; also tried "true"
MinLimit="5"
MaxLimit="20"
So basically if I could find some way to get these attributes set within the context.xml file instead of my code, I would be a happy developer :-)
Oh well, it's almost Miller time here on the east coast. Maybe a few beers will help me find the solution I'm looking for. -
Performance degradation using Jolt ASP Connectivity for TUXEDO
We have a customer that uses Jolt ASP Connectivity for TUXEDO and is suffering
from a severe performance degradation over time.
Initial response times are fine (1 s.), but they tend to increase to 3 minutes
after some time (well, eh, a day or so).
Data:
- TUXEDO 7.1
- Jolt 1.2.1
- Relatively recent rolling patch installed (so no there are probably no JSH performance
issues and memory leaks as fixed in earlier patches)
The ULOG shows that during the night the JSH instances notice a timeout on behalf
of the client connection and do a forced shutdown of the client:
040911.csu013.cs.kadaster.nl!JSH.234333.1.-2: JOLT_CAT:1185: "INFO: Userid:
[ZZ_Webpol], Clientid: [AP_WEBSRV3] timed out due to inactivity"
040911.csu013.cs.kadaster.nl!JSH.234333.1.-2: JOLT_CAT:1198: "WARN: Forced
shutdown of client; user name 'ZZ_Webpol'; client name 'AP_WEBSRV3'"
This happens every 10 minutes as per configuration of the JSL (-T flag).
The customer "solved" the problem for the time being by increasing the connection
pool size on the IIS web server.
However, they didn't find a "smoking gun" - no definite cause for the problem.
So, it is debatable whether their "solution" suffices.
It is my suspicion the problem might be located in the Jolt ASP classes running
on the IIS.
Maybe the connection pool somehow loses connections over time, causing subsequent
users having to queue before they get served (although an exception should be
raised if no connections are available).
However, there's no documentation on the functioning of the connection pool for
Jolt ASP.
My questions:
1) What's the algorithm used for managing connections with Jolt ASP for TUXEDO?
2) If connections are terminated by a JSH, will a new connection be established
from the web server automatically? (this is especially interesting, because the
connection policy can be configured in the JSL CLOPT, but there's no info on how
this should be handled/configured by Jolt ASP connectivity for TUXEDO)
Regards,
Winfried ScheuldermanHi,
For ASP connectivity I would suggest looking at the .Net client facility provided in Tuxedo 9.1 and later.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
We have a new iMac 2.9ghz and are running an airport extreme set up in house with several express entenders. The problem is that our son is streaming netflix and doing on line gaming and hogging all the band width. Time Warner tech suggested a hard wired ethernet connection to computer base sattion next to computer so that it can have direct conenction to internet. After much fishing of wire the connection worked great, but the wifi connection for the house is gone. I unplugged the ethernet connection and everything is fine. I read the articles about adjusting network preferences, but the issue seems to be in the extreme not in the computer. the connection goes from cable modem to extreme, from extreme to house and to hard wired conenction to other computer. Do we need a splitter before the extreme?
No. Something else is going on.
Your son may be hogging all the bandwidth but your wireless network should never simply disappear. Moreover, if your son isn't doing anything the available bandwidth for other devices should remain unaffected.
I suspect that something is miswired, and from what you describe I suspect that link is between the Extreme and the "other computer".
The way to accomplish what you propose is
Modem > Ethernet cable to Extreme's WAN port
Extreme's LAN ports > wired Ethernet devices.
There should be nothing but an Ethernet cable linking an Extreme LAN port and any other wired device. If you run out of available LAN ports on the Extreme, you need to by an "Ethernet switch" - they are not expensive, but don't call it a "splitter" or you will only confuse yourself. The switch would be connected to one of the Extreme's LAN ports, and you would connect additional devices to it. You can also use one of your Expresses for that purpose, assuming it is the current generation model with two Ethernet ports. -
ISA B2B logon Error: No valid private connection for internet user
Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
at com.sap.isa.businessobject.User.login(User.java:143)
at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: BlackmanIts a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too -
Need help to Configure FTPS connection for File Sender Adapter
Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.KThe basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek -
How to update db server connection for objects in business view
I had to migrate to a new SQL server for my main user database (sql 2008)
crystal itself is fine, and I have updated all of the reports to use a different connection string.
but I had forgotton about the dynamic dropdownlists in business view..
what is the best way to update the connection for those ??
I will go through each one manually if I have to.. but was hoping for something a little easier
thanks for any help !Hi
Open the config.cfg and then change the JdbcPasswordEncoding=Intradoc to JdbcPasswordEncoding=ClearText and then enter the new password in JdcPassword=<new passwd> . Save the file and then restart the CS. It should get going from there.
Srinath -
My wifi only connects for a few minutes then goes away, I've been trying to look for solutions on the Internet but none of them work, help! It's really frustrating.
Hello FrancisN,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
and
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
Intermittent or complete loss of the wireless connection
Best of luck,
Mario -
I had my iTunes and library on my home computer. The computer crapped out along with the hard drive. I have my library on my iPod and want to put it on my new computer, but any time I connect the iPod to my home computer (and work computer for that matter), it only connects for about 5 seconds and then disconnects on its own. I go to look at the iPod as a hard drive and I have nothing but empty folders (contacts, calendar, recordings and something else), but nothing is in them.
1) How do I get my iPod to connect to my computer?
2) How do I get my iPod to connect to iTunes?
3) Why don't my music files on my iPod show up on my computer?
I have uninstalled iTunes and reinstalled iTunes. I have done the "trick" of hitting the 'Menu and Center' buttons at the same time unitl the Apple icon appears. I have tried going into Disk Mode. I don't know what to do now. The word "Resetting" scares me because this is where I have my 150 GB of music stored and I'd rather not have to upload my CD's again.............will resetting affect that? The word "Restore" is even scarier!!!
Help!i am using a cable connector like this one.. it works with audio when pluged into a stereo but not a TV.i am trying to display video from ipod, also from other apps.. i also want to know why it does not work.
i use the video app on the iPod and video stored on other aps. -
got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE
Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete -
My Ipod touch is in recovery mode but when I go into Itunes to restore it, it will only stay connected for a few seconds then ejects itself from itunes. How do I keep my Ipod connected long enough to go through the restore process?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
How to block internet connection for a period of time?
Hey guys is there a way to block internet connection via a lan connection for a period of time? A program that when my pc is boot up it run secretly and at the time schedule it block the internet connection with no pop up. When i not at home some person
used my pc to use my internet connection everyday. I can't lock up my pc since my brother or my dad used it.
Hi,
You could create a schedule task to achieve this.
The detailed solution please refer to this thread:
https://social.technet.microsoft.com/Forums/en-US/7544cbed-507d-4eef-907d-bafb99b45411/disable-internet-for-a-set-period-of-time?forum=w7itprogeneral
Karen Hu
TechNet Community Support
Maybe you are looking for
-
MDB(Message Driven Bean) is not working in MDM2.0.1
Hi, I am trying to use MDB for importing files.I followed the Weblogic_jms_Integration(1308181.1) document and i created all the xml files CM_config.xmCM_ejb-jar.xml.wls.jms_1.includel.win.exit_4.include,CM_config.xml.win.jms.include,CM_ejb-jar.xml.w
-
How do I print envelopes on my HP Officejet 4620 using notepad or similar?
I tried to post my address and receiver address on note pad. I selected #10 envelope, but the printer said I had the wrong size paper.
-
Apple Tv doesn't appear on iMac as a device - Help!
Having just bought my Apple TV, I managed to get 1 day of operation from it before the it disappeared from my device list. I reset it to factory, switched off Mac, reinstalled ITunes and reset wireless router. When I setup the Apple TV to transmit th
-
How to make F-02 only can "park" , not "post" .
Use F-02 to key FI document , how to make it only can "park" , not "post" . I try to use "PFCG" to find whether any "Authorization object" to control it ,but i didn't find. anyone can help me ? Thank you ! http://file.itpub.net/forum/201112/07/1518
-
I want change language taskbar on itune on my pc to english,how can i do this?
i want change language taskbars on itune on my pc to english,how can i do this?