Obhttpd not running (new OSB 10.2 installation, Linux)

Greetings.
I just installed OSB 10.2 on a CentOS 5.4 machine.
Everything seems to be starting up properly except obhttpd.
I've restarted the observiced service and still no joy. I have pasted the observiced.log below.
I haven't yet opened the ports (400, 36420, 10000) in the firewall yet. Could that have anything to do with this problem?
Also, I haven't done any Apache configuration; this is all out-of-the-box (nothing in the Oracle documentation about configuring Apache).
-Jeff
2010/02/16.05:51:37 observiced version 10.2.0.5.0 (linux) -- Mon Aug 10 04:30:37 PDT 2009
Copyright (c) 1992, 2009, Oracle. All rights reserved. on palmgren.local pid 2497
2010/02/16.05:51:37 listening for requests on eth0 (192.168.1.24) port 400
2010/02/16.05:51:37 note: this machine is an administrative server
2010/02/16.05:51:37 obhttpd started in pid 2519
2010/02/16.05:51:38 note: obscheduled listening on eth0 (192.168.1.24) port 36420
2010/02/16.05:51:38 listening for NDMP connections on eth0 (192.168.1.24) port 10000
2010/02/16.05:51:38 obhttpd -DSSL -d/usr/local/oracle/backup/apache pid 2519 exited with code 0x20008F06, value 1
2010/02/16.06:22:15 termination signal caught; observiced will exit when quiescent
2010/02/16.06:22:15 observiced version 10.2.0.5.0 (linux) -- Mon Aug 10 04:30:37 PDT 2009
Copyright (c) 1992, 2009, Oracle. All rights reserved. on palmgren.local pid 3296
2010/02/16.06:22:15 listening for requests on eth0 (192.168.1.24) port 400
2010/02/16.06:22:15 note: this machine is an administrative server
2010/02/16.06:22:15 obhttpd started in pid 3299
2010/02/16.06:22:15 note: obscheduled listening on eth0 (192.168.1.24) port 58118
2010/02/16.06:22:15 listening for NDMP connections on eth0 (192.168.1.24) port 10000
2010/02/16.06:22:15 obhttpd -DSSL -d/usr/local/oracle/backup/apache pid 3299 exited with code 0x20008F06, value 1

I shut down iptables and restarted observiced; same result. (Then I started iptables back up.)
Nothing else running on port 80.
I wasn't prompted to do anything with the www server during install. I ran installob again and still wasn't prompted. But based on the log file output it seems that it is there; it's just getting stuck on something. Permissions?

Similar Messages

Dbassist exception and netasst can not run

Oracle 815 have been installed on turbo linux 2.2.10V4.0(CLASSPATH , LD_LIBARY_PATH are set both). But the netasst can not run. When I type netasst , linux give me noting the quit to xterm promot. And when run dbassist , it give a message like follow:
JNLS Exception racle.ntpg.jnls.JNLSException Unable to find any National Character Sets. please check your Oracle installion.
I have only choose one language(english) to install Oracle815.
can anyone help me?
Thanx.
dflan

thanks jmsalvo (John Salvo) for posting answer at http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html .
dflan
null

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just g

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?

Use the download version:
Download CS3 products
Mylenium

Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

New version (17) will not run after downloading and installing. Tried twice ...uninstalling between downloads but to no avail. Have re-installled v.15

this is really to report what occurred this morning.
since the update to v 17 Firefox would not run
d/loaded the new version twice (uninstalling between) but to no avail - the program would not open although Task Manager shows the process running.
have re-installed v 15 so I have a browser.
lack of a way to report such problems is a weakness which needs addressing

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

Download a fresh Firefox copy and save the file to the desktop.
*Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
*http://kb.mozillazine.org/Recovering_a_missing_profile

Unable to install itunes 10,5.I receive this message: there is a problem with this window installer package. A program required for nthis install to complete could not run. Contact your support personnel or package vendor.Am using window ultimate 64 bits

I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits

There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

AH...good.
There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine. And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
Long story short...you can install it fine without any issues.

After refomatting HDD, reinstalling Vista plus service packs, recovering files from Microsoft backup and installing new copy of Firefox 3.6, Firefox will not run. Have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.

After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

PSE 12 installs is registered does not run - incompatible!

Installation of just bought PSE 12 went fine. No errors. 1 month old Dell 3847 with Win 8.1. PSE 12 will not run. Starts to load and aborts. Diagnotics says it is INCOMPATIBLE! What is wrong here that is not showing up for those who get PSE 12 to run under Win 8.1 with 64-bit processor?

Bought PSE 12 because PSE 6.0 did not run. Same problem with PSE 12. Did a refresh and started loading PSE 12. Worked fine. McAfee was running. Loaded PSE 6.0 and IT worked too. Spent the rest of the day reloading the other app(lications). I'm old fashion. The word "app" is a bit too chic for the work that went into loading it! Anyway, I suspect that what the problem was was an Adobe program running in the background. I thought I had closed ALL Adobe programs as the PROMPT indicated. Anyway, PSE 12 is compatible with Win 8.1. So is PSE 6.0 and no telling how many other OLD versions. Readers beware. NEW software is NOT always THE answer!!

Lightroom cc 2015 installation will not run

Just upgraded to lightroom cc 2015 using creative cloud (from existing lightroom 5.7.1). The new installation executes, apparently installs the files, but the application will not run. Tried uninstalling then reinstalling - no difference. windows 7 x64. Any suggestions?

Have you tgried- Lightroom doesn't launch or closes automatically after splash screen
Regards
Rajshree

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

Set up iCloud
Set up iCloud (2)

Obhttpd not running (new OSB 10.2 installation, Linux)

Similar Messages

Maybe you are looking for