OBI 11G Configuration

Hi Experts,
I have OBI 10g in my system now i want to install 11G while installing 11G we have to uninstall 10G version...? is this mandatory.I want to keep both versions is it possible to keep both versions in the system.
Configuration:
Windows 7 ultimate
32 bit
4GB RAM
oracle 11G
Please suggest me any one.
Regards,

Hi,
You don't need uninstall 10g.
But your configuration is low. Windows 7 takes approximately 1gb ram then you have also 10g version. I didn't remeber how much ram it takes.
My advice is use sample installation. When installing 11g version you will see three option.
1. Sample
2. Enterprise
3. Software only
Sample installation option is best for your configuration. If you install enterprise option it will take min 2.5gb ram.

Similar Messages

OBIA 11g: Financial Analytics Config

We are configuring OBIA 11.1.1.7 to Financial Analytics based on the tasks provided in documnetation. FInding it bit hard to understand the current documnetation structure after working on 7.9.6.3 where there were specific section for Fiancial Analytics related tasks.
Wanted to clarify the below. In 7.9.6.X we had to configure the below files as part of EBS GL configuration.
1> file_group_acct_names.csv
2> file_group_acct_codes_ora.csv
3> file_grpact_fstmt.csv
But apart from the 2nd file the other two files are not refered to in the OBIA 11g Config document. Not sure if those needs to be configured. If anyone has come across any categorized steps for Financial anlytics for OBIA 11g it would of help.. Di not find any here.
Cheers
D

First 2 files are referred in configuration guide. You can skip the 3rd one.
I have successfully configured Financial Analytics with these 2 files and some others. e.g for FA
Regards
Naeem Akhtar Khan

Is OBI 11g is supported on Vista 32bit?

I am sorry I should have addressed this in a new thread, so here it is
I am having problems configuring OBI-11g on Vista Enterprise - SP1 - 32bit. The installation, however is successful.
The link provided is for: Release 10.1.3.2.1 for Microsoft Windows (http://download.oracle.com/docs/cd/E10352_01/doc/bi.1013/e10270/toc.htm#CEGGGCEG
) and it seems Vista is not supported in 10.1.x
Can anybody advise if OBI 11g is supported on Vista 32bit and if they have it running successfuly?
Thanks.

Hi,
I have the following confirmation from Oracle:
'From the certification Matrix, http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls#'Current System Certification'!A1
Only having OBIEE client is supported on Vista but not the server and that can be the reason that you are having issue. You need to choose from one of the supported Operating Systems for having the server installed.
As I am configuring OBIEE for server <-- it is currently recommended that vista will not support it.
Thanks.

Estimate time period for OBIA 11g Vanilla Impelementaton For HR,Financails

Hi Guru's
I need to know Time period for OBIA 11g Vanilla Implementation for Following Appliations Source System is Oracle R12;
1- HR
2- Procurement
3- Financails
4- Supply Chain and Order Management
To implement all these four Application as once without any customization how long its going to take?????
Looking for your HELP....
Regards
Sher

Sher,
As per my knowledge Normally for any OBIA implementation a module
1st week for installation and Configuration of everything (ETL,DAC,RPD)
2nd week to load the data and to make necessary loads(inc/full) using DAC/ETL
3rd/4th week would be for testing the reports/Data and moving to production.
Note : Above time-lines varies by experience and also without any customization
Please post your questions on OBIA : Business Intelligence Applications
Thanks,
Saichand.v

OBI 11G sUnquotedTableName.empty() error while creating a report

hello guru's
We have a problem when trying to build a report in OBI 11G. We have migrated an RPD from 10 to 11 and one 1 installation DEV all is OK, on TEST we get all kind of problems.
One of the main issues is when trying to build a report and clicking on the + to expand a node of a dimension object we hget the sUnquotedTableName.empty() error
When going to the logs I see the following details of the error.
Does anyone have a clue and can help us out?
Koen Verheyen
ProblemhMessage Level 10
Relationship ID 0:1
Component OBIPS
Module saw.httpserver.processrequest
Host XXXXXXX
Host IP Address XXXXXX
Thread ID 2836335504
ECID 0000Ijcd5UzFw000jzwkno1Clgr10001eK
Message
Assertion failure: !sUnquotedTableName.empty() at line 1936 of /scratch/aime1/adestore/views/aime1_dadvfa0138/bifndn/analytics_web/main/project/webutil/tablenameutils.cpp
Supplemental Detail
File:tablenameutils.cpp
Line:1936
Location:
saw.httpserver.processrequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
SessionID: 07vh3ae7bqk8nsnslpm32fhtcm9nsc5cd7va98q
AuthProps: AuthSchema=UidPwd|PWD=******|UID=koen_verheyen|User=koen_verheyen|RunAs=koen_verheyen
ecid: 0000Ijcd5UzFw000jzwkno1Clgr10001eK,0:1
ThreadID: 2836335504
HttpCommand: JSONRequestTableColumns
RemoteIP: 10.10.1.15
HttpArgs:

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Help on Oracle streams 11g configuration

Hi Streams experts
Can you please validate the following creation process steps ?
What is need to have streams doing is a one way replication of the AR
schema from a database to another database. Both DML and DDL shall do
the replication of the data.
Help on Oracle streams 11g configuration. I would also need your help
on the maintenance steps, controls and procedures
2 databases
1 src as source database
1 dst as destination database
replication type 1 way of the entire schema FaeterBR
Step 1. Set all databases in archivelog mode.
Step 2. Change initialization parameters for Streams. The Streams pool
size and NLS_DATE_FORMAT require a restart of the instance.
SQL> alter system set global_names=true scope=both;
SQL> alter system set undo_retention=3600 scope=both;
SQL> alter system set job_queue_processes=4 scope=both;
SQL> alter system set streams_pool_size= 20m scope=spfile;
SQL> alter system set NLS_DATE_FORMAT=
'YYYY-MM-DD HH24:MI:SS' scope=spfile;
SQL> shutdown immediate;
SQL> startup
Step 3. Create Streams administrators on the src and dst databases,
and grant required roles and privileges. Create default tablespaces so
that they are not using SYSTEM.
---at the src
SQL> create tablespace streamsdm datafile
'/u01/product/oracle/oradata/orcl/strepadm01.dbf' size 100m;
---at the replica:
SQL> create tablespace streamsdm datafile
---at both sites:
'/u02/oracle/oradata/str10/strepadm01.dbf' size 100m;
SQL> create user streams_adm
identified by streams_adm
default tablespace strepadm01
temporary tablespace temp;
SQL> grant connect, resource, dba, aq_administrator_role to
streams_adm;
SQL> BEGIN
DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE (
grantee => 'streams_adm',
grant_privileges => true);
END;
Step 4. Configure the tnsnames.ora at each site so that a connection
can be made to the other database.
Step 5. With the tnsnames.ora squared away, create a database link for
the streams_adm user at both SRC and DST. With the init parameter
global_name set to True, the db_link name must be the same as the
global_name of the database you are connecting to. Use a SELECT from
the table global_name at each site to determine the global name.
SQL> select * from global_name;
SQL> connect streams_adm/streams_adm@SRC
SQL> create database link DST
connect to streams_adm identified by streams_adm
using 'DST';
SQL> select sysdate from dual@DST;
SLQ> connect streams_adm/streams_adm@DST
SQL> create database link SRC
connect to stream_admin identified by streams_adm
using 'SRC';
SQL> select sysdate from dual@SRC;
Step 6. Control what schema shall be replicated
FaeterBR is the schema to be replicated
Step 7. Add supplemental logging to the FaeterBR schema on all the
tables?
SQL> Alter table FaeterBR.tb1 add supplemental log data
(ALL) columns;
SQL> alter table FaeterBR.tb2 add supplemental log data
(ALL) columns;
etc...
Step 8. Create Streams queues at the primary and replica database.
---at SRC (primary):
SQL> connect stream_admin/stream_admin@ORCL
SQL> BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'streams_adm.FaeterBR_src_queue_table',
queue_name => 'streams_adm.FaeterBR_src__queue');
END;
---At DST (replica):
SQL> connect stream_admin/stream_admin@STR10
SQL> BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'stream_admin.FaeterBR_dst_queue_table',
queue_name => 'stream_admin.FaeterBR_dst_queue');
END;
Step 9. Create the capture process on the source database (SRC).
SQL> BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name =>'FaeterBR',
streams_type =>'capture',
streams_name =>'FaeterBR_src_capture',
queue_name =>'FaeterBR_src_queue',
include_dml =>true,
include_ddl =>true,
include_tagged_lcr =>false,
source_database => NULL,
inclusion_rule => true);
END;
Step 10. Instantiate the FaeterBR schema at DST. by doing export
import : Can I use now datapump to do that ?
---AT SRC:
exp system/superman file=FaeterBR.dmp log=FaeterBR.log
object_consistent=y owner=FaeterBR
---AT DST:
---Create FaeterBR tablespaces and user:
create tablespace FaeterBR_datafile
'/u02/oracle/oradata/str10/FaeterBR_01.dbf' size 100G;
create tablespace ws_app_idx datafile
'/u02/oracle/oradata/str10/FaeterBR_01.dbf' size 100G;
create user FaeterBR identified by FaeterBR_
default tablespace FaeterBR_
temporary tablespace temp;
grant connect, resource to FaeterBR;
imp system/123db file=FaeterBR_.dmp log=FaeterBR.log fromuser=FaeterBR
touser=FaeterBR streams_instantiation=y
Step 11. Create a propagation job at the source database (SRC).
SQL> BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name =>'FaeterBR',
streams_name =>'FaeterBR_src_propagation',
source_queue_name =>'stream_admin.FaeterBR_src_queue',
destination_queue_name=>'stream_admin.FaeterBR_dst_queue@dst',
include_dml =>true,
include_ddl =>true,
include_tagged_lcr =>false,
source_database =>'SRC',
inclusion_rule =>true);
END;
Step 12. Create an apply process at the destination database (DST).
SQL> BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name =>'FaeterBR',
streams_type =>'apply',
streams_name =>'FaeterBR_Dst_apply',
queue_name =>'FaeterBR_dst_queue',
include_dml =>true,
include_ddl =>true,
include_tagged_lcr =>false,
source_database =>'SRC',
inclusion_rule =>true);
END;
Step 13. Create substitution key columns for äll the tables that
haven't a primary key of the FaeterBR schema on DST
The column combination must provide a unique value for Streams.
SQL> BEGIN
DBMS_APPLY_ADM.SET_KEY_COLUMNS(
object_name =>'FaeterBR.tb2',
column_list =>'id1,names,toys,vendor');
END;
Step 14. Configure conflict resolution at the replication db (DST).
Any easier method applicable the schema?
DECLARE
cols DBMS_UTILITY.NAME_ARRAY;
BEGIN
cols(1) := 'id';
cols(2) := 'names';
cols(3) := 'toys';
cols(4) := 'vendor';
DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(
object_name =>'FaeterBR.tb2',
method_name =>'OVERWRITE',
resolution_column=>'FaeterBR',
column_list =>cols);
END;
Step 15. Enable the capture process on the source database (SRC).
BEGIN
DBMS_CAPTURE_ADM.START_CAPTURE(
capture_name => 'FaeterBR_src_capture');
END;
Step 16. Enable the apply process on the replication database (DST).
BEGIN
DBMS_APPLY_ADM.START_APPLY(
apply_name => 'FaeterBR_DST_apply');
END;
Step 17. Test streams propagation of rows from source (src) to
replication (DST).
AT ORCL:
insert into FaeterBR.tb2 values (
31000, 'BAMSE', 'DR', 'DR Lejetoej');
AT STR10:
connect FaeterBR/FaeterBR
select * from FaeterBR.tb2 where vendor= 'DR Lejetoej';
Any other test that can be made?

Check the metalink doc 301431.1 and validate
How To Setup One-Way SCHEMA Level Streams Replication [ID 301431.1]
Oracle Server Enterprise Edition - Version: 10.1.0.2 to 11.1.0.6
Cheers.

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Cache Seeding in OBI 11g in Clustered Environment on Unix Box

hi All,
i want to do cache seeding for a couple of dashboards in OBI 11g,
Steps taken:
1. Global Cache is ON
2. Global shared path is SET
3 Global cache size = 3GB
i am using agents for cache seeding and are scheduled after the dataload is complete.
It successfully runs early morning...delivers a mail.
But when I am trying to the reports from OBI...its again generating the SQl...without hitting the cache.
It might be due to the Clusterred Env... 2 nodes Env.
Please suggest some technique to achieve this cache seeding.
Thanks in advance

GLOBAL_CACHE_STORAGE_PATH This path must point to a network share. All clustering nodes share the same location.
Check the bellow setting
GLOBAL_CACHE_STORAGE_PATH = "directory name" SIZE;
ex: GLOBAL_CACHE_STORAGE_PATH = "C:\cache" 250 MB;
CLUSTER_AWARE_CACHE_LOGGING -->Turns on logging for the cluster caching feature. Used only for troubleshooting. The default is NO.
Example: CLUSTER_AWARE_CACHE_LOGGING = NO;

In OBI 11G OracleBIServerCom~ is Down

Hi Guru,
In OBI 11G unable to log in into the analytics it is showing error that An error occurred during authentication. Try again later or contact your system administrator an also unable to open the RPD in online mode .
Previously it is working fine when i check the OPMN status in command prompt OracleBIServerCom~ is in DOWN status. And i manually start only OracleBIServer but its showng an error message
failed to start the process after the maximum retry limit
how to make OracleBIservercom up and is this the reason that i am not logging into the Analytics and RPD in online.
please suggest me i am new to OBI 11G
Thanks,

i cheked all the above links my database connection and every thing fine but still i am facing same error
--------------------------------------------------------------+--------
ias-component | process-type | pid | status
--------------------------------------------------------------+--------
coreapplication_obiccs1 | OracleBIClusterCo~ | 6360 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 4820 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 5830 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 8384 | Alive
coreapplication_obis1 | OracleBIServerCom~ | N/A | Down
and showing the error massage in command prompt when i am starting the opmn services
Error
---> Process <index=1,uid=1700598323,pid=8180>
failed to start a managed process after the maximum retry limit
log:
c:\11G\instances\instance1\diagognostics\logs\OracleBIServerComponent\Coreaplication_obis1\console~coreaplication_obis1~1.log
and in the above location log file this is the log i found
Oracle BI Server starting...
13/03/31 23:46:08 Start process
Oracle BI Server starting...
13/03/31 23:46:16 Start process
Oracle BI Server starting...
13/04/02 10:11:53 Start process
Oracle BI Server starting...
13/04/02 10:12:40 Start process
Oracle BI Server starting...
13/04/02 10:26:04 Start process
Oracle BI Server starting...
13/04/02 10:26:37 Start process
Oracle BI Server starting...
13/04/02 12:32:52 Start process
Oracle BI Server starting...
13/04/02 12:33:07 Start process
Oracle BI Server starting...
Please can any one help me or i have uninstall and re install again lease suggest me how to fix this one
Thanks in Advance
Edited by: 963851 on Apr 2, 2013 12:04 PM
Edited by: 963851 on Apr 2, 2013 12:04 PM

OIM 11g configuration failed. Create domain step failed

Hi,
I'am facing problem in OIM installation. Here is the description of error :
Create Domain step failed
Bootstrap Domain Configuration
Log
Config Action Bootstrap Domain Configuration started
Create Domain
Error
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
Log
Create Domain
Step Create Domain started
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
The log file (C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-07_03-49-05PM.log) showed the following message :
[2012-06-07T16:10:46.953+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->24938fb1-a72a-427a-b318-a098773c53f6 StatusMsg:Starting Domain.
[2012-06-07T16:10:46.953+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] reportStartConfigAction: EXIT........
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0]
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
[2012-06-07T17:49:23.328+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@8ae380
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
Thanks in advance for help.
Thanks and Regards,
Prasad
Edited by: 938380 on Jun 7, 2012 5:52 AM

actually when i restarted the configuration the test passed for create domain but it went on to fail in the apply java required file step
here is the link to the thread : OIM 11g configuration failed. Apply java required files step failed
Hoping for your help.. and thanks for the suggestions..
Regards,
Prasad

OBI 11g 11.1.1.6.0 - Installation failed

Hi All,
During OBI11g 11.1.1.6.0 Installation I got the below error and installation failed,
Installation Failed.
OUI Session failed
OUI-10185:Unable to copy 'H:\Softwares\Oracle\OBI\bishiphome\Disk4\stage\/Components/oracle.jrf.as.config/11.1.1.6.0/1/DataFiles/Expanded/./bin/config.bat' to 'E:\OBI11g\Oracle_BI1/bin/config.bat'. OUI-10186:The source file 'H:\Softwares\Oracle\OBI\bishiphome\Disk4\stage\/Components/oracle.jrf.as.config/11.1.1.6.0/1/DataFiles/Expanded/./bin/config.bat' does not exist.
OS: Windows 7 Home Perineum SP1 - 32 Bit
Actually the source exists under the path,
H:\Softwares\Oracle\OBI\bishiphome\Disk4\stage\Components
Looks like installation process trying in wrong path.
Could you please help me in resolving this issue?
Thanks & Regards
M Thiyagarajan

Hi all,
I have the same problem while installaing OBI 11g 11.1.1.6.0 on a Windows 7 Profesional 64 bits laptop.
Does any one have a solution please ?
Thx.

OBI 11G installtion seems ok. But cannot open browser

Hello,
I have installed OBI 11G to my notebook.
Everything seems to be ok, when I check the status with command opmnctl status.
opmnctl status output is below:
C:\app\WLS1033\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 3388 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 4732 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1948 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 4588 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 3384 | Alive
But, when i try to open OBI page (I use the default port 9704), I get the error :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
What can be the problem?
Thanks,
What can be t

BI requires more than just these services. I would start by logging onto EM. This will tell you if the Java components are running in the managed server for BI. If all these are green then view all log messages since a reboot. EM has a view all messages page allowing you to walk through all log files in time order looking for red ones with errors. For more information read the Administration Guide which tells you how to start and stop everything plus how to trouble shoot issues.

OBI 11g and OBI 10g pointing to the same database

Hi guys!
I have a questions. On my PROD server I've installed database and OBI 10g. I want to install now OBI 11G on a separate machine and point repository to the same database.
Is it possible? Will it cause any problems?
With regards,
PsmakR

Hi,
Should not be an issue. When you install 11g, it will create few default schemas, provide your prod db details so that obiee related schemas will reside in prod db.
You should not have any issue in migration.
Regards,
Dpka

Time constraint on repository password in obi 11g

hi all
can i set 60 day expiry limit on the repository password. i am talking about obi 11g.
plz help guys
regards
mahi

Hi Mahi,
I guess it should be possible. Security in 11g is managed in the Weblogic Server. Please check the documentation.
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

DAC 11g Configuration Error

Dear All,
Recently I have started to install BIAPPS 7.9.6.4,till informatica fine,when DAC 11g configure, Iam getting the following error security key is invalid or unavaliable*.
Any help to debug !!!!!!!!!!!!!
Regards
GN

Hi GN,
i faced the same problem, first edit config.sh/cmd and dac_env.sh/cmd files and edit automationUtils.properties
file, which is located in the <Domain_Home>\dac directory, and then try running the command line utilities. refer this doc for more e14849.
Please say if you need any help.

OBI 11G Configuration

Similar Messages

Maybe you are looking for