OBI 11g install

I'm trying to install OBI on windows x86 64 bit and in step 10 of 12 its asking me disk number 3 so i can continue the install.
I have downloaded and unzipped disk 1 of 1 and 2 of 2 so i am not sure why its asking me for disk 3 as there is not one provided.
Any help on how to move forward with this is appreciated.

Hi user,
There are 4 parts in 2 disks...you need to download all 4 parts and upon that check if any file as been corrupted.
Check this links http://onlineappsdba.com/index.php/2010/08/14/obiee-11g-111130-documentation-installation/
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
hope answers you.
Cheers,
KK

Similar Messages

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

In OBI 11G OracleBIServerCom~ is Down

Hi Guru,
In OBI 11G unable to log in into the analytics it is showing error that An error occurred during authentication. Try again later or contact your system administrator an also unable to open the RPD in online mode .
Previously it is working fine when i check the OPMN status in command prompt OracleBIServerCom~ is in DOWN status. And i manually start only OracleBIServer but its showng an error message
failed to start the process after the maximum retry limit
how to make OracleBIservercom up and is this the reason that i am not logging into the Analytics and RPD in online.
please suggest me i am new to OBI 11G
Thanks,

i cheked all the above links my database connection and every thing fine but still i am facing same error
--------------------------------------------------------------+--------
ias-component | process-type | pid | status
--------------------------------------------------------------+--------
coreapplication_obiccs1 | OracleBIClusterCo~ | 6360 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 4820 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 5830 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 8384 | Alive
coreapplication_obis1 | OracleBIServerCom~ | N/A | Down
and showing the error massage in command prompt when i am starting the opmn services
Error
---> Process <index=1,uid=1700598323,pid=8180>
failed to start a managed process after the maximum retry limit
log:
c:\11G\instances\instance1\diagognostics\logs\OracleBIServerComponent\Coreaplication_obis1\console~coreaplication_obis1~1.log
and in the above location log file this is the log i found
Oracle BI Server starting...
13/03/31 23:46:08 Start process
Oracle BI Server starting...
13/03/31 23:46:16 Start process
Oracle BI Server starting...
13/04/02 10:11:53 Start process
Oracle BI Server starting...
13/04/02 10:12:40 Start process
Oracle BI Server starting...
13/04/02 10:26:04 Start process
Oracle BI Server starting...
13/04/02 10:26:37 Start process
Oracle BI Server starting...
13/04/02 12:32:52 Start process
Oracle BI Server starting...
13/04/02 12:33:07 Start process
Oracle BI Server starting...
Please can any one help me or i have uninstall and re install again lease suggest me how to fix this one
Thanks in Advance
Edited by: 963851 on Apr 2, 2013 12:04 PM
Edited by: 963851 on Apr 2, 2013 12:04 PM

OBI 11G installtion seems ok. But cannot open browser

Hello,
I have installed OBI 11G to my notebook.
Everything seems to be ok, when I check the status with command opmnctl status.
opmnctl status output is below:
C:\app\WLS1033\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 3388 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 4732 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1948 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 4588 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 3384 | Alive
But, when i try to open OBI page (I use the default port 9704), I get the error :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
What can be the problem?
Thanks,
What can be t

BI requires more than just these services. I would start by logging onto EM. This will tell you if the Java components are running in the managed server for BI. If all these are green then view all log messages since a reboot. EM has a view all messages page allowing you to walk through all log files in time order looking for red ones with errors. For more information read the Administration Guide which tells you how to start and stop everything plus how to trouble shoot issues.

Is OBI 11g is supported on Vista 32bit?

I am sorry I should have addressed this in a new thread, so here it is
I am having problems configuring OBI-11g on Vista Enterprise - SP1 - 32bit. The installation, however is successful.
The link provided is for: Release 10.1.3.2.1 for Microsoft Windows (http://download.oracle.com/docs/cd/E10352_01/doc/bi.1013/e10270/toc.htm#CEGGGCEG
) and it seems Vista is not supported in 10.1.x
Can anybody advise if OBI 11g is supported on Vista 32bit and if they have it running successfuly?
Thanks.

Hi,
I have the following confirmation from Oracle:
'From the certification Matrix, http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls#'Current System Certification'!A1
Only having OBIEE client is supported on Vista but not the server and that can be the reason that you are having issue. You need to choose from one of the supported Operating Systems for having the server installed.
As I am configuring OBIEE for server <-- it is currently recommended that vista will not support it.
Thanks.

OBI 11g and OBI 10g pointing to the same database

Hi guys!
I have a questions. On my PROD server I've installed database and OBI 10g. I want to install now OBI 11G on a separate machine and point repository to the same database.
Is it possible? Will it cause any problems?
With regards,
PsmakR

Hi,
Should not be an issue. When you install 11g, it will create few default schemas, provide your prod db details so that obiee related schemas will reside in prod db.
You should not have any issue in migration.
Regards,
Dpka

OBI 11G sUnquotedTableName.empty() error while creating a report

hello guru's
We have a problem when trying to build a report in OBI 11G. We have migrated an RPD from 10 to 11 and one 1 installation DEV all is OK, on TEST we get all kind of problems.
One of the main issues is when trying to build a report and clicking on the + to expand a node of a dimension object we hget the sUnquotedTableName.empty() error
When going to the logs I see the following details of the error.
Does anyone have a clue and can help us out?
Koen Verheyen
ProblemhMessage Level 10
Relationship ID 0:1
Component OBIPS
Module saw.httpserver.processrequest
Host XXXXXXX
Host IP Address XXXXXX
Thread ID 2836335504
ECID 0000Ijcd5UzFw000jzwkno1Clgr10001eK
Message
Assertion failure: !sUnquotedTableName.empty() at line 1936 of /scratch/aime1/adestore/views/aime1_dadvfa0138/bifndn/analytics_web/main/project/webutil/tablenameutils.cpp
Supplemental Detail
File:tablenameutils.cpp
Line:1936
Location:
saw.httpserver.processrequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
SessionID: 07vh3ae7bqk8nsnslpm32fhtcm9nsc5cd7va98q
AuthProps: AuthSchema=UidPwd|PWD=******|UID=koen_verheyen|User=koen_verheyen|RunAs=koen_verheyen
ecid: 0000Ijcd5UzFw000jzwkno1Clgr10001eK,0:1
ThreadID: 2836335504
HttpCommand: JSONRequestTableColumns
RemoteIP: 10.10.1.15
HttpArgs:

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

OBIEE 11g installing in Linux. domain creation error

Hi,
OBIEE 11g installing in Linux server now. domain creation is in progress for about an hour and in log I can see below error.
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
domain creation is still running and looks like it is struck to start domain no idea how to solve the issue. waiting to see whether domain creation successful.
Please let me know how to fix this issue.
Thanks
Jay.

Hi,
Have you try to increase MaxPermSize, it may occure memory issue.
change the Middleware/ORACLE_BI1/oui/oraparam.ini and fine it like below
JRE_MEMORY_OPTIONS=" -mx512m -XX:MaxPermSize=512m" then try to change it
JRE_MEMORY_OPTIONS=" -mx2048m -XX:MaxPermSize=2048m"
(i.e:It will increase the numbers for allocating more memory) then save it and then try to run config.bat (software only/enterprise) method and configure it.
Thanks
Deva

DO I NEED TO HAVE ORACLE 11G INSTALLED?

Hi,
I have never used Oracle before. I have a very basic doubt. I have a Peoplesoft Id and password. I wish to know if I need to have Oracle 11g installed on my laptop to be able to use Peoplesoft Code to create applications using an online database? Kindly let me know at the earliest and will be of great help.
I greatly appreciate it.
Thanks. :)

You need to have app designer installed if you want to work with peopletools, which will allow you to connect 3-tier to running Oracle/Peoplesoft instance. If you want to connect 2-tier, then you'll need the 11g client installed.

Cache Seeding in OBI 11g in Clustered Environment on Unix Box

hi All,
i want to do cache seeding for a couple of dashboards in OBI 11g,
Steps taken:
1. Global Cache is ON
2. Global shared path is SET
3 Global cache size = 3GB
i am using agents for cache seeding and are scheduled after the dataload is complete.
It successfully runs early morning...delivers a mail.
But when I am trying to the reports from OBI...its again generating the SQl...without hitting the cache.
It might be due to the Clusterred Env... 2 nodes Env.
Please suggest some technique to achieve this cache seeding.
Thanks in advance

GLOBAL_CACHE_STORAGE_PATH This path must point to a network share. All clustering nodes share the same location.
Check the bellow setting
GLOBAL_CACHE_STORAGE_PATH = "directory name" SIZE;
ex: GLOBAL_CACHE_STORAGE_PATH = "C:\cache" 250 MB;
CLUSTER_AWARE_CACHE_LOGGING -->Turns on logging for the cluster caching feature. Used only for troubleshooting. The default is NO.
Example: CLUSTER_AWARE_CACHE_LOGGING = NO;

OBIA 11g: Financial Analytics Config

We are configuring OBIA 11.1.1.7 to Financial Analytics based on the tasks provided in documnetation. FInding it bit hard to understand the current documnetation structure after working on 7.9.6.3 where there were specific section for Fiancial Analytics related tasks.
Wanted to clarify the below. In 7.9.6.X we had to configure the below files as part of EBS GL configuration.
1> file_group_acct_names.csv
2> file_group_acct_codes_ora.csv
3> file_grpact_fstmt.csv
But apart from the 2nd file the other two files are not refered to in the OBIA 11g Config document. Not sure if those needs to be configured. If anyone has come across any categorized steps for Financial anlytics for OBIA 11g it would of help.. Di not find any here.
Cheers
D

First 2 files are referred in configuration guide. You can skip the 3rd one.
I have successfully configured Financial Analytics with these 2 files and some others. e.g for FA
Regards
Naeem Akhtar Khan

OBI 11g 11.1.1.6.0 - Installation failed

Hi All,
During OBI11g 11.1.1.6.0 Installation I got the below error and installation failed,
Installation Failed.
OUI Session failed
OUI-10185:Unable to copy 'H:\Softwares\Oracle\OBI\bishiphome\Disk4\stage\/Components/oracle.jrf.as.config/11.1.1.6.0/1/DataFiles/Expanded/./bin/config.bat' to 'E:\OBI11g\Oracle_BI1/bin/config.bat'. OUI-10186:The source file 'H:\Softwares\Oracle\OBI\bishiphome\Disk4\stage\/Components/oracle.jrf.as.config/11.1.1.6.0/1/DataFiles/Expanded/./bin/config.bat' does not exist.
OS: Windows 7 Home Perineum SP1 - 32 Bit
Actually the source exists under the path,
H:\Softwares\Oracle\OBI\bishiphome\Disk4\stage\Components
Looks like installation process trying in wrong path.
Could you please help me in resolving this issue?
Thanks & Regards
M Thiyagarajan

Hi all,
I have the same problem while installaing OBI 11g 11.1.1.6.0 on a Windows 7 Profesional 64 bits laptop.
Does any one have a solution please ?
Thx.

11g install on Redhat, difference between umask 022 & 0022

For file permissions, Redhat install by default has umask set to 0022, and 11g install steps require 022. What is the difference? why 022?

The first digit sets special permissions:
http://perl.bristolbath.org/index.cgi?RedHatLinuxEssentials (scroll down in this article)
Werner

11g Install on Windows

Hi all,
I need some help with the 11g install on windows 2003 database server. We already have 10gR2 software with few development databases running on this server. I am trying to find out the pros and cons if I install 11g on a different drive on the same server. If I will have to change the path for oracle, since both 10g and 11g databases will be in use. And if it will affect the applications(appln server) connecting to both 10g and 11g databases.
Thank you.

As you long as you keep the two version installed into different ORACLE_HOME, they shouldn't be interfering with each other.
If you are going to have 11g instance running on the same server, you might use 11g version listener to serve all instances (10g and 11g).

11g Install Failure, Listener Error.

11g Install Failure, Listener.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
The box is at present not networked and as is not on a domain. The computer name is homedb.
I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
Enterprise manager configuration failed due to the following error -
Listener is not up. Start the listener and run EM configuration again.
Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
When I click ok on the error message the install completes as normal.
I can TNSPING orcl which results in the following:
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
008 12:36:33
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)
I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
sqlplus sys@orcl and typing in the password I get the following error:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
This is also the error I get when using sql developer to connect to the db.
The extract from the log file mentioned above is as follows:
20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
My listener, tnsnames and sqlnet are as follows:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
Running the command: lsnrctl service, results in the following:
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
:52
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully.
Running lsnrctl status results in the following:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 20-JAN-2008 12:09:10
Uptime 0 days 0 hr. 40 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
ra
Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
The listener supports no services
The command completed successfully
I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
All firewalls and anti virus software have been disabled for the purposes of this install.
Do I need to manually register the listener with the database, if so how do I go about doing this?
I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

To answer my own question I fixed this by issuing the command
netsh winsocks reset
Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
Hope that helps,
Adam

OBI 11g install

Similar Messages

Maybe you are looking for