OBI Applications for Siebel - SADMIN user being locked

Hi,
I have OBI 7.9.6.2 installed with Siebel 8.1.1.4.
Also, Informatica, DAC, etc. everything seems OK. I am still dealing with a couple of erros in the ETL but a strange thing is happening...
Account SADMIN is being locked in the DB after some time.
I am assuming that OBIEE server (that is loading the .rpd from BI Applications) is the guilty one. So we left for several weeks this server down. This week I've reviewed all the Users / passwords and variables in the .rpd. Replaced the old one... and up the server.
After 1 or 2 days more or less the account SADMIN is locked.
So since I am not running ETL more (Just ran it once), I am assuming that somehow this account/user is being referenced in the .rpd and due to some wrong password is being locked.
Am I right in these assumptions ? I've checked the connection pool users (variables)/passwords and I could not find any SADMIN.
Pls. any ideas ??
Txs.
Antonio

Hello Ernesto,
I see... the message shows "&1", not the real "user ID". (I thought you didn't want to reveal the real user ID on the forum.)
You could open an OSS message and ask why it doesn't show the correct user ID.
Meanwhile I would try to search table like "EBAN" and "EBKN" in Tcode SM12. A good ABAPer may give you more table names related to Tcode ME59.
Best regards,
Victor

Similar Messages

Cisco NAC: Issue for the Wireless Users being assigned "Un-Authenticated Role" to stop accessing the Network !!!

Hi,
I am looking for a solution to deal with the wireless NAC users being authenticating (Web Login Only) from a particular AD group. The mapped users gets into a particular role and access VLAN but un-mapped users get the default role which is "Un-Authentication Role" but also gets the same Access VLAN. So, the un-wanted users gets also the same access which is undesired.
I tried with one solution which is, i put those users into a role named as "Deny_Role" and Enable a Timer of 1 minute (least Time) on it, which seems working but i can see that user is disconnecting (session timeout) after 3 or 5 minutes. I want to limit this but again, i do not find this as an appropriate solution.
We could deal with wired users easily, bounce the port and get them again in "Unauthenticated Role" and VLAN will be "Un-Auth VLAN" with no network access or rediect them into a particular role with a specific VLAN. But, this is not valid in case of "Wireless Users".
So, I am looking for a solution to deal with the wireless users in this situation...
Please advise or give an idea.
BR,
Mubasher Sultan

Hi,
Any idea or suggestion...
BR,
Mubasher Sultan

A WebCam application for a kde user

I'm searching for a webcam application, but unfortunately I'm unable to find any:
Cheese is out of question because it pulls half of the gnome packages with it
wxcam from aur fails to compile:
[dheart@lightbringer wxkam]$ makepkg
==> Making package: wxcam 1.0.1-1 (ср юли 30 14:09:05 EEST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found wxcam-1.0.1.tar.bz2 in build dir
-> Found CImg-1.2.8.tar.gz in build dir
-> Found wxcam-1.0-gcc430.patch in build dir
==> Validating source files with md5sums...
wxcam-1.0.1.tar.bz2 ... Passed
CImg-1.2.8.tar.gz ... Passed
wxcam-1.0-gcc430.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f wxcam-1.0.1.tar.bz2
-> bsdtar -x -f CImg-1.2.8.tar.gz
==> Entering fakeroot environment...
==> Starting build()...
patching file src/v4l.h
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking wxWidgets version... 2.8.8
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for intltool >= 0.35.0... 0.36.2 found
checking for perl... /usr/bin/perl
checking for XML::Parser... ok
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for WXCAM... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: executing intltool commands
config.status: executing po/stamp-it commands
make all-recursive
make[1]: Entering directory `/home/dheart/Downloads/wxkam/src/wxcam-1.0.1'
Making all in src
make[2]: Entering directory `/home/dheart/Downloads/wxkam/src/wxcam-1.0.1/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/lib/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -pthread -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_SRC_DIR=\""."\" -DPACKAGE_DATA_DIR=\""/usr/share"\" -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/libglade-2.0 -I/usr/include/libxml2 -I/usr/include/mjpegtools -I/usr/include/mjpegtools/mpeg2enc -I/usr/include/mjpegtools/mplex -march=x86-64 -mtune=generic -O2 -pipe -MT audio.o -MD -MP -MF ".deps/audio.Tpo" -c -o audio.o audio.cpp; \
then mv -f ".deps/audio.Tpo" ".deps/audio.Po"; else rm -f ".deps/audio.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/lib/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -pthread -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_SRC_DIR=\""."\" -DPACKAGE_DATA_DIR=\""/usr/share"\" -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/libglade-2.0 -I/usr/include/libxml2 -I/usr/include/mjpegtools -I/usr/include/mjpegtools/mpeg2enc -I/usr/include/mjpegtools/mplex -Wall -g -I/usr/lib/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -march=x86-64 -mtune=generic -O2 -pipe -MT ccvt.o -MD -MP -MF ".deps/ccvt.Tpo" -c -o ccvt.o ccvt.c; \
then mv -f ".deps/ccvt.Tpo" ".deps/ccvt.Po"; else rm -f ".deps/ccvt.Tpo"; exit 1; fi
In file included from ccvt.c:24:
/usr/include/mjpegtools/mjpeg_types.h:40: error: conflicting types for 'int64_t'
/usr/include/sys/types.h:198: error: previous declaration of 'int64_t' was here
make[2]: *** [ccvt.o] Error 1
make[2]: Leaving directory `/home/dheart/Downloads/wxkam/src/wxcam-1.0.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/dheart/Downloads/wxkam/src/wxcam-1.0.1'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
webkam requires kde4...
I don't know if came is supposed to make images or not but on my system the webcam flashes and then the console output is:
[dheart@lightbringer wxkam]$ camE
camE: camE 1.9 - (c) 1999, 2000 Gerd Knorr, Tom Gilbert
camE: grabber config: size 320x240, input 0, norm 0, jpeg quality 75
can't load font arial/8
can't load font arial/8
[dheart@lightbringer wxkam]$ No supported palette found, please report your device to the author
So... any ideas?

Dheart wrote:Just... get a working webcam application?
I was just checking to see if you were simply looking for something to record video from your camera. If so I would suggest something like FFmpeg. Obviously you're looking for something more than that.
--EDIT--
By the way, your picture from the other thread, if you run it through GIMP's emboss filter, then through greycstoraton, you can get a pretty good picture of yourself...
Last edited by skottish (2008-08-02 16:51:00)

Set default application for *all* users

Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
I want to do that for all users of my mac, without repeating the getinfo process for each of them.
Is there any adminstrative tools for doing that?
Thank you.

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

LMS 4.0 user account lock

Can anyone tell me how many unsucessful attempts a user has to access the LMS application prior to the account being locked? Is this configurable?
THANKS!

You're welcome.
If you use an external authentication module (e.g., TACACS etc.), those generally are able to enforce the failed login lockout feature. Here is a link to the admin guide section explaining how to do that.

RCA Managed SID users password locked

Hi All,
The configuration of the managed system went well for SID DR2. I have given Dialog user for the configuration of managed system and it created SMDAGENT_SMP and SAPSUPPORT users. But now when my Dialog user password is changed (due to its expiry), the RCA of some part is locking the Dialog user of managed system DR2 as its using same old password.
My question is whether this behaviour is happend to anyone else, and if it happend how to solve it.
Thanks,
Rohan

Hi Rohan,
If you are refering to SAPSUPPORT user being locked, check if you have changed the password for this user in the Setup Wizard for the system DR2.
1. Diagnostics Setup
2. Managed Systems
3. Setup Wizard
4. Setup Parameters
Under "Initial User/Passwords" inform the new password and rerun the setup.
If you are refering to the Diagnostics agent user being locked, refer to "RCA User Administration Guide" section 2.3.8. There you will see how to update the password for this user.
["RCA User Administration Guide"|https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000086995&_SCENARIO=01100035870000000202&_OBJECT=011000358700000178012009E]
Kind Regards,
Allam Drebes

How can I set the default home page for all new users in Firefox 4

I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
Best regards
Jonas

In Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
See:
*http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
You can also use a mozilla.cfg file to set the default value for prefs.<br />
See: http://kb.mozillazine.org/Locking_preferences
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes

Users for OBI Applications

Hello,
I am confused with item 4.4.1 from OBI Applications 7.9.6.3 installation manual... I´ve copied it bellow:
+"The transactional (OLTP) database user that is registered in DAC should be the+
+database table owner. Alternatively, at a minimum, the user registered in DAC+
+must have read privileges on the transactional database for all tables and aliases.+
+For Siebel CRM databases, the OLTP database user requires privileges to create+
+triggers and views on all tables and aliases."+
I cannot quite understand... The OLTP database user that is registered in DAC >> pls. Is this the dac repository owner ? The one we do the login in DAC ?
The next paragraph says... the OLTP database user requires privileges to create... >> I imagine that is the same user as above ?
Pls. I would appreciate comments and help :))
txs
Antonio

Txs. for your comments...
Well, I have done an implementation using DBA as privileges... but that is not the current case.
I understand you saying about the physical connections - but if I remember correctly -- this connection needs a user/pwd...
I do have something like below, but I am not sure it is correct... like BIDAC privileges below... (also I´ve seen doc in support: ID 513063.1 but it is kind of old and not clear)
I would appreciate comments... suggestions.
Txs.
Siebel Database - SIEBEL
*· Informatica – BIREP*
o   Connect
o   Resource
o   Create and Drop Indexes and Views
*· DAC Repository – BIDAC (Privileges in SIEBEL and BIOBW)*
o   Connect
o   Resource
o   Create Trigger
o   Create View
*· Oracle Business Analytics Warehouse - BIOBW*
grant SSE_ROLE
o   Connect
o   Resourceo Create View

I downloaded an upgrade but when I try to put it in the applications, it says the file is locked. when I unlock it, it still doesn't let me drag it, and reverts back to being locked when I close the window. I am using Mac Lion.

I opened Firefox this morning and it told me I needed to download a newer version. I downloaded the new version. I got the image prompting me to drag Firefox to the applications folder. When I do that, it asks if I want to replace the old Firefox, I click 'yes' and enter my password. It tells me the file is locked. I open 'get info', unlock the file and enter my password. It claims I have read and write access privileges. I then try again to drag Firefox to the applications folder - it says the same thing about the file being locked. I check again under 'get info', and Firefox has reverted to being locked again. I unlock it again and without closing that window, i.e. when it is still showing unlocked, I try again to drag it. Same message.
Now I can't use Firefox at all because it has corrupted the old version I was using and I am unable to download the new one.
I am using Mac OS 10.7.2, Lion, on a MacBook Pro.

What exactly is the error you get?
How are you attempting this copy?
There's almost certainly a way to accomplish what you want to do (probably best from the terminal possibly copying the entire user dir and fixing up permissions, etc.) but I'm not sure you will end up with the results you want. There are plists in the preferences dir that you probably don't want to copy over (e.g., many of the com.apple.* prefererences). And many apps also create more than just plists. There may be stuff in Application Support, LaunchAgents, Internet Plug-Ins, etc.). And this would be stuff you do want to copy. Bottom line is it is not a trivial exercise which is probably why the system is slapping your hands for even attempting it

Oracle Application Management Pack for Siebel 10gR4 is GA

Oracle Application Management Pack for Siebel 10gR4 is now generally available.
Go to this OTN page if you want more information about the product.
http://www.oracle.com/technology/products/oem/prod_focus/app_mgmt.html
You may also download it from OTN to try it out as part of Enterprise Manager 10gR4. We will be demonstrating it at booths D8 and J7 at the Oracle Demoground at Moscone South Hall, at session S291922 at Moscone West L2-2001 on Monday, 11/12 from 3:15 to 4:15 p.m., and at the Siebel Pack Hands-on Lab (S294089) at Marriott Hotel Golden Gate Room B1 on Thursday, 11/15 from 11:30 a.m.-12:30 p.m.
The Siebel Pack is designed to be a complete and integrated management tool for Siebel. Using this management pack, you may get proactive alerts on impending problems on the application, examine run-time statistics to troubleshoot and tune performance, compare configurations across different environments, keep track of configuration changes, proactively enforce configuration policies in order to avoid configuration related problems, monitor and report on service level delivered by the application and performance diagnostics of user and server performance. The pack may be used with other Oracle Enterprise Manager management packs and plug-in’s to achieve end-to-end management of the entire application environment, including both Oracle and non-Oracle databases, operating systems, storage and network devices.
The 10gR4 release of this pack adds integrated Siebel Transaction Diagnostic support using data captured via Siebel Application Response Measurement (SARM) framework. With this tool, you may:
- Analyze request processing for individual user requests
- Analyze CPU and memory consumption of processing requests for different Siebel Server Components
- Visualize SARM metric data graphically
- Compare performance profiles over time
- Create performance reports and share them with your co-worker for collaborative performance diagnostics
The 10gR4 version of this Siebel Transaction Diagnostic tool also adds support for Siebel 7.7 and 7.8 in addition to being compatible with Siebel 8.0. It is fully integrated with Oracle Enterprise Manager, which eliminates the need for separate install and user maintenance, and it runs on all operating system platforms that Oracle Enterprise Manager supports.

Working with the Oracle Enterprise Manager group to integrate closely with their monitoring solutions has been one of the most important advantages of joining the Oracle team. As our customers have started to use CRM more deeply as part of their business processes, CRM has quickly become Mission Critical, with 24/7 uptime requirements. Furthermore, as CRM becomes further integrated into the enterprise, knowing the status and health of the connections to multiple backend systems becomes evermore crucial.
Through our partnership with the Oracle Enterprise Manager, we aim to support true Enterprise-class CRM. We are the only solution out there with over six million live users, and we are leveraging the knowledge gained from those customers in our Enterprise Manager integration. With the real-time monitoring and diagnosis that Oracle Enterprise Manager provides, we simplify the process of managing sophisticated CRM implementations which span organizations and systems. If you have a Siebel implementation with four servers or more, or with integrations to several systems, you owe it to yourself to check out Oracle Enterprise Manager.

Can we use other than SADMIN user for EAI

Hi,
We have deployed a new test server in our project.
We would like to give a separate user ID and password for EAIObjMgr_enu component while send HTTP request.
We have created a new user in Admin - User screen and created user in DB granting SSE_ROLE.
But when I use the same user in HTTP request URL for one of the Query operation, it is not returning the record, though it is available.
The Query is working fine while using SADMIN user.It is returning the record in response XML.
When I login to the application with the new user, in "My Contacts" I could not see any records, because no record is created by the new user.
I think the EAI Query also not returning any record because no records are created by this user ID.
How can I use the new User in EAI to work like SADMIN user.

Hi,
Yes you can use different user other than SADMIN. We have setup different user in our Organization due to SOX Compliance.
Basically for EAI, the position of the user matters more than the responsibility.
EAI User needs data visibility, due to which SADMIN is used which is having Siebel Administrator Position.
Just setup a position similar to Siebel Administrator or assign the Siebel Administrator position to your newly created User & then use it for EAI.
Thanks,
Shalabhsneha
Geek Talkin Siebel
http://geektalkin.blogspot.com

Being able to have one sigle file open in a specific application or have a user directory

Wonder if anyone can help with the following request ?
One things doesn't make sense with the WIFI mini I Pad Latest IOS :
If you have several programs that can open a specific file as PDF for example why do you have to upload the same file ( PDF) into to each specific application folder or cache. Resulting in multiple copy of the file (PDF) copied on your I pad??? which translate to a useless waste of space.
Wouldn't it be easier having a single directory where the user can save all of his file/s and each program that can manipulate that particular file have access to it. As an example I got several program that that can run an excel file and am enjoying a multiple copy of the same workbook loaded into my WIFI MINI.. this is just blatant waste of memory/ disk space on my Ipad..... I wonder there is a program that allows me to save all this file in a single directory and give me the opportunity to open each file with a specific application of my choice?????
Thanks for your help

That doesn't help.
There's a clear distinction between temporary files, and files downloaded to the users' download folder.
Or at least, there should be.
I'm inclined to call this a bug, since the user (being me) didn't ask for the download.
Downloading upon opening a site from the address bar is a different action than downloading from within a site (e.g. clicking a url shortcut or a button to download from an indirection).

BI applications for EBS R12 release in OBIA 7963 release

Hi all,
Can anybody list the BI applications for EBS R12 release which supported in OBIA 7.9.6.3?
Thanks
Ram

Are you referring to the EBS functional modules? BI Apps has a numbe of product families (Financial Analytics, HR Analytics, CRM Analytics..etc) that can source from EBS as well as other ERP systems (PeopleSoft, Siebel, JDEdwards..etc). If you are looking for the functional areas, I would suggest asking your Oracle rep for the "Product Guides" for the package you need (e.g Financial Analytics, HR Analytics..etc). Also there is a "Content Guide" you can find on metalink that lists the OOTB reports, dashboards, and Metadata content (RPD attributes).
Here is the list of DAC subject areas under the vanilla EBS container..it may help for now until you have the other docs:
Employee Expenses
Enterprise Sales - Backlogs
Enterprise Sales - Booking Lines & Order Lines
Enterprise Sales - Booking Lines & Schedule Lines
Enterprise Sales - Customer Status History
Enterprise Sales - Cycle Lines
Enterprise Sales - Invoice Lines
Enterprise Sales - Order Lines
Enterprise Sales - Pick Lines
Enterprise Sales - Schedule Lines
Financials - Budget
Financials - Cost of Goods Sold
Financials - General Ledger
Financials - General Ledger - US Federal
Financials - Group Account Number Clean Up
Financials - Payables
Financials - Receivables
Financials - Revenue
HR - Absence Event
HR - Flex Prereq
HR - Generate Flexfield Data
HR - Learning Management
HR - Payroll
HR - Recruitment
HR - Workforce
Projects
Projects - Finance Integration
Supply Chain - AP Invoices
Supply Chain - BOM Items
Supply Chain - Inventory Balance
Supply Chain - Inventory Transactions
Supply Chain - Purchase Cycle Lines
Supply Chain - Purchase Order
Supply Chain - Purchase Receipts
Supply Chain - Purchase Requisitions
If this was helpful please mark the response as helpful or correct.

Project Plan or Activities for an OBI Applications project

I should be starting a new OBI Applications project for a customer that has SIebel CRM installed. I know quite well OBI applications (install, configuration, etc).
I am looking for a project plan for an OBI applications project... like Stages, Activities per stage, deliverables, etc.
I'd appreciate any help.
Txs.
Antonio

Hey Bob,
what you probably need is some information
on how to Mic a guitar or recording vocals mix it,
and recording environment (meaning your fisical space).
Instead of buying a lot of books and DVD's on the subject,
a good solution's probably a sound on sound esub (after
subscribe you have acess to the past articles (on a search
data base) and the mag online for a year.
It's a wonderfull way to learn too.
http://www.soundonsound.com/
Cheers,
Jorge

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

http://techobar.blogspot.com/2012/11/unlocking-lock-pattern-after-too-many.html
Or this site.
http://about-google-android.blogspot.com/2013/04/how-to-unlock-android-phone-when-forgot.html

OBI Applications for Siebel - SADMIN user being locked

Similar Messages

Maybe you are looking for