OBI Apps7.9.6.1 new AP holds subject area
I have a scenario to build the new subject area for the AP holds information along with some other AP and supplier information.
Please advice me about the join conditions for the AP holds with these tables..
1)AP_INVOICES_ALL
2)AP_INVOICE_DISTRIBUTIONS_ALL
3)AP_HOLDS_ALL
4)PO_LINES_ALL
5)PO_LINE_LOCATIONS_ALL
What is the least granular level in this holds information, I know an Invoice contains multiple holds.
I'm a beginner in this subject area..any help would be much appreciated
Thanks in Advance
Praveen Reddy C
Edited by: user13563937 on Jan 19, 2011 10:11 PM
These tables are part of the eBusiness-suite. You have better chances to get an answer in an eBusiness-related forum, maybe here OA Framework
Similar Messages
-
ODI error with OBI APPs7.9.5.2 help me plzzzzzzz
Dear All,
I installed the OBI Apps7.9.5.2 and when I installed The ODI and when I want to execute this commands
agentservice –i –s WORKFLOW 20910
agentservice –i –a INTERFACE 20911
it says that JDK must be required instead of jre .
How I can solve this issue PLzzzzzzzzzzzzzzz,
Thanks in Advance ,
Zakihi Zaki,
Can you please post the ODI related stuff at ODI forum or search the error message in the odi forum
Data Integrator
Thanks,
Saichand Varanasi -
When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?
New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?
-
I don't know where the contacts came from on that are now on my new phone. There are way too many and it is not my list of contacts I have on gmail. Where else is this from? I spent a LONG time on gmail going through my list of contacts. There were about 400 and I got it down to about 90. When I went to sync my new phone, ALL 400 synced.
Thank you for any help!Sorry for the repeat...new here. OBVIOUSLY.
-
I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?
Any advice welcome.To clear to old before passing it on, open the Settings app and tap on General (left hand menu). Scroll down and tap on settings, then tap on Erase All Content and Settings.
If you have been synching the iPad to iTunes on a computer, you should also have backed it up. If you havn't backed it, you will want to do so before clearing the settings and use the back up to set up your new iPad.
You may dinf soem of the articles here useful:
http://www.apple.com/support/ipad/syncing/ -
My Mac was stolen and I've bought a new one. But how do I transfer my songs off my iPod over to my new Mac? Most are from CD's (not purchased from iTunes)
i see that I can buy a $39 program but I want to avoid an extra cost. Already bummed I had to shell out an unexpected $1,500
thanks in advanceHello hayesh,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to use your iPod to move your music to a new computer
http://support.apple.com/kb/ht1329
Best of luck,
Mario -
How add new column in analysis from two subject area
which is the right way to add a new column to an existing combined analysis from two subject areas?
if I add the new column first in my two combined queries, then I saw a new column in the results column panel, but this new column is empty and I can't edit its propreties (the button edit column doesn't work). I can't even save the modified analysis due to a "bad xml" errror.
if I try to first add a new column from the results panel and then in my combined queries, obiee says that new columns are not of the same type.
I suppose this is because the new column in results panel has no aggregation formula, unlike new columns in queries.
But I don't know how to change the properties of the new field in the results panel, with no subject area available.
I have to restart from a single subject area? possible?
In this case, there is a way to save/copy filters ecc. from the old analysis?
If anyone can help.
Thanks
LucWhen you are using union clause in analysis or combining with other subject area you suppose to have same number of columns and their datatypes with other analysis.
for datatype issues you can use cast in column expression in each analysis. If you want to add a column only from 1 analysis just add and in other analysis use dummy column with exp 0 or ''(for char) based on the datatype.
These you have to deal with each analysis.
If helps pls mark -
I need to transfer the settings (mail, safari, etc.) from my Macbook to a new Macbook pro. what are the steps I need to follow?
Time Machine will sort that out, you got an external HD ?
-
Using of already existing logical tables and columns in a new subject area.
Hi Every one,
i am new to OBIEE technology.
In my project i need to create a new subject area for already existing RPD.
In that RPD there are some logical tables and column created for previous project and i need to use those in this new subject area that i am going to create.
My question is what is the best way to use them .
I mean just to drag and drop them into new subject area or any other way.
please have your valuable suggestions
thanking youYes, you can basically copy paste all the tables that you need from BMM layer into your new folder in the presentation layer. Just make sure all the joins are defined well between all the tables that exists in the new folder, so you wont end up running into ODBC errors when you run analysis.
Hope this helps.
Thanks,
-Amith. -
the speakers of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks
Hi talero,
Contact AppleCare or bring it into an Apple Store or AASP. -
I have just purchased the iPhone 5s and my previous phone was backed up on iCloud. However when I restored this on my new phone my photos are still being restored after 4 days. Shows the amount there but no pictures? Is there anything I can do to get them back as my other phone has now been cleared. On my iCloud storage it still shows that my previous phone had all the info still?? I'm confused!
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If using Photo stream, but sure to move the received photos to a permanent album. If you have been doing that, then you can sync those photos back to your device.
Or, you can find other apps in the app store that send camera roll photos to a service like Dropbox.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure". -
I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?
Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W. -
I just got a new iphone and we are hooked up to the same apple ID in this family, and his Ipad Have been receiving my texts. How can I fix this?
Welcome to the Apple Community.
You could simply ensure that only the numbers and addresses you wish to use on each device are checked at Settings > Messages > Send & Receive. However this isn’t an ideal solution because the other person can always change these settings from their device and have some fun with you and your contacts.
You’d be far better getting them to delete your account from their device and have them create one of their own. If you are sharing an ID for some other service such as iTunes, you can continue to do so, you only need change the ID for messages. -
I just bought a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder App. There are also no "calendar" and "add an event" buttons on the Calendar App. Why? Is there a way to add either a reminder or an event?
For the reminders app - just tap on an open space on the ruled paper window under the heading in order to create a new reminder. Or tap on the + sign in the upper right corner of the app. You do not have the + sign on the app?
For the calendars app to go Settings>iCloud>Calendars>On. Toggle the setting on and off and the + sign should appear in the lower right corner of the calendars app. Tap the + sign to create a new event.
Maybe you are looking for
-
Font smoothing / antialiasing
I've noticed that Java apps and browser plug-ins do not smooth or antialias fronts on my Windows XP box. How can I enable this feature? It may not seem like a big deal, but it is when one of the Java apps is an IDE and you are staring at it for hours
-
I have an record in a table with a status flag, and when the status changes from 1 to any other value I want to check if detail records exist in 3 other tables. Where should I put this code? I don't know where to start. My first guess would be doDML
-
Why is my imac crashing ??
Interval Since Last Panic Report: 15113 sec Panics Since Last Report: 9 Anonymous UUID: 9A0FDEC4-9188-47D4-AA18-647801E53E70 Fri Aug 31 18:43:44 2012 panic(cpu 1 caller 0xffffff800deb7b95): Kernel trap at 0xffffff800de876
-
What is the method to disable the Parameters button
Hi Ted, What is the method to disable the Parameters button ("Show/Hide Parameters Panel")? I can't find it in the API. Thanks, Tuan
-
I am trying to set the printer defaults, having reinstalled the driver software. I have selected the printer in Devices and Printers. The printer name has been shortened to C410 for ease of recognition. I right click and select printing preference