OBI Installation on AIX

Hi ,
I am looking for documentation specific to following:
Install Oracle OBI 10.1.3.3 on Unix Environment
a.     OBI Server on Unix (AIX ) environment
b.     OBI Web Server on Unix (AIX) and host on Apache Tomcat.
c.     Informatica on Unix (AIX)
d.     Oracle DAC Server on Unix (AIX)
Specific documentation on each of the them would be of great help. I would also appreciate if we can pre-requisites instructions too. E.g. Java on AIX
Thanks and Regards
Alok

OBIEE 10.1.3.4 is basically a Windows application that has been ported to other platforms. Unfortunately, the Administration Tool only runs on Windows, so you will need to install OBIEE on AIX and on Windows, then delete what you do not need on Windows so you are left with the Administration Tool only.
On Windows, I installed 10.1.3 OAS (J2EE + WebServer), then did an Advanced Installation of OBIEE on WIndows, and installed into the 10.1.3 OAS. Then I deleted the 10.1.3 OAS so I was just left with the Administration Tool. Make sure you have 10g client installed on your WIndows machine, then configure your ODBC datasources per the Oracle By Example fpr OBIEE:
Creating a Repository Using the Oracle Business Intelligence Administration Tool
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html
On AIX, you need to decide if you want to do a Basic or Advanced Installation. Do not install OBIEE into the R12 10.1.3 Oracle Home, but if you have another 10.1.3.3 or higher OAS in use on AIX for Demantra or SOA Suite, you can use that with an Advanced Installation.
Oracle® Business Intelligence Infrastructure Installation and Configuration Guide
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
You can configure the OBIEE for Fusion Intelligent per the following implementation guide:
Oracle Fusion Intelligence for E-Business Suite Implementation Guide
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120fieig.pdf
The OBIA installation instructions are here:
Oracle® Business Intelligence Applications Fusion Edition Installation and Configuration Guide Release 7.9.5
http://download.oracle.com/docs/cd/E12127_01/doc/bia.795/e12083/toc.htm
4 Installing and Setting Up Oracle Business Intelligence Applications
http://download.oracle.com/docs/cd/E12127_01/doc/bia.795/e12083/windows_ic.htm#i1105303

Similar Messages

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!

Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
Indraneel

Same thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas.

10g rac deinstall and 11.2.0.3 rac installation on aix 6.1

Hi,
I have to perform deinstallation of 2 node 10g rac on aix and on same setup i need to install 2 node 11.2.0.3 rac on aix 6.1.
As being a newbie in this please guide me from where to find the exact documentation for the same.
Also, In linux we need to install oracleasm rpm, In AIX do we need the same?
Thanks.

Following are the OS requirement for Oracle 11gr2 installation on AIX
AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01)
AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel
AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel
Following can be confirmed from metalink ID 169706.1

11gR2 RAC installation in AIX fails while running root.sh on node2

Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
Regards

HI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

Dialog instance installation on AIX

Hi,
I am palnning to install Dialog instance of ECC5.0 with oracle database on AIX5.3
OS.
I am having some queries.
1: what file system is requied for dialog instance on AIX ( both for oracle and application)
2: whether /sapmnt and /usr/sap/trans I have to make as NFS or not.
3: whether oracle client installation it will ask in between of dialog installation if not then when it will ask.
4: What about oracle patch installation.
Please reply its urgent.
Thanks
Manoj

01. Yes
Only 3 Mounts you require ( assuming local Kernel Upgrade)
/usr/sap/trans
/sapmnt/<SID>/global
/sapmnt/<SID>/profile
02. Please check 1st Point answer
03. NW2004s demands for Oracle Client installation cd. check in NW2004.
04. Patch is for Oracle Server ( not for client)
Rgds
PR

Xlc file Required for Oracle Product Installation on AIX 6.1

Hi All,
I am trying to install Oracle 11g Forms & Reports on AIX 6.1 [TL12].
I have installed JDK and Weblogic Server without any Errors.
When we reach 93% on software Alone installation with 11g Forms & Reports, we got some error
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'We raised a SR for this Error, Oracle Support given one solution to follow.
>
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.But Unfortunately in our AIX 6.1 Box we dont have any 'XLC', in any of the folder in entire file system.
What is this XLC ?? if that is not available how to create the SYMLINK ?
Kindly Some one Advice me.
Regards,
Paja

Hi Paja,
I would recommend you o post this thread under application server/weblogic forum.
Arik

ABAP Engine Installation on AIX Cluster

Dear All,
I want to install ABAP Engine on Clustered IBM Server environment with O.S. AIX and Oracle DB. I am new to AIX and Cluster environment. Can anyone help me with the installation guide, or any related documents in this regard will be helpful..
If possible please mail me the procedure / guide on [email protected]
thanks.
Prashant.

Hi,
The required documents for installation are available on http://service.sap.com/instguides
Regards,
Siddhesh

ASM installation on AIX?

We are installing Oracle 10gR2 on a new AIX server, we want to use ASM for a single instance on this server. I am told that you need to install ASM instance first and I see some threads that elude to an option from the Orcle Installer to "install and configure ASM only" .
When I click on the "type of install", running the installer from the Disk1 ./runinstaller - I get only two options, enterprise edition or standard edition.
If I look at the "custom" install option it shows the ability to "configure for ASM" but I'm thinking that option would be used to configure an instance to USE an already up and running ASM instance.
How do I install JUST an ASM instance, or does the installer actually create the ASM instance during the custom install if one does not exist?

On the initial screen choose those options that say "Advanced" or "Software Only" or similar things: It is there.

MDM installation on AIX 5.3 core dumps

Hi all,
We installed MDM 5.5 SP4 on AIX 5.3 ML 5 (and the latest patches were applied last week-end).
The MDM Server, Import and Syndication daemons are started.
Database is Oracle 10.2 (corresponding Oracle client is used), installed on the same server.
MDM client software is in sync with the server level.
Since the installation, we get core dumps of the mds daemon (even when trying to perform the most basic operations). Consider it to be completely unusable for testing anything. You look at it, it breaks. Sorry, but that is how it is.
MDM Patches and hotfixes to the patches have been applied up to the latest level The problem is reported at SAP Support and they have core dumps, logfiles, trace files for studying. So far, the only feedback we got was to install MDM on its own server (it is a trial installation on a server where other applications are running - though I can hardly see that as a cause for core dumps).
My questions :
- are we unique in running MDM on this software paltform ?
- are others (if they exist experiencing the same problems on AIX 5.3 ?
To be honest : for the moment we are thinking about reinstalling on a Windows server.
Thanks in advance for any feedback,
Frank Van Overloop

Hello,
we have finally made some progress on this issue.
Basically, we suffered from a combination of :
- wrong usage of the product
- probably shaky exception handling in the AIX version
The cause was found by SAP MDM support after we reconstructed the problem while using a special debug-version of the mds executable. This produced a usable dump.
--- extract from the SAP reply -
The core dump shows a crash in recalculating the family tree after the
import. Family tree is being used only to create printed catalogs (which require the publisher and an additional license).
1) Do you have any value in the categories table?
2) Does the MDM server crash if you cancel the automatic family tree
recalculation in the import map, and answer "no" in the dialog box which asks to recalculate the family tree?
3) Do you intend to create a printed catalog?
If the answer to any of the questions is "no", then this asserts that
the recalculation of the family tree should not take place at all. In
this case the family table could/should be deleted. And this should not
reoccur.
end extract -
After we deleted this family table, the tests are running stable.
It's a pity that the program does not 'die' in a more elegant way or gives some understandable indication on what is going wrong.
It also looks like this exception is handled better on the Windows implementation. The same 'functional mistake' was made there and this produced no dumps at all. Could be a porting issue from one platform to another.
Regards,
Frank

Errors while copying File Oracle 11G installation on AIX 5L

Hi,
I just try to install oralce 11g on my AIX 5l machine. All requirements has been checked and are done.
While installation I get many Errors like "File not find:"
/oracle/SID/..../applications/WFMLRSVCApp.ear , wfjvlsnr.csh, wfmgrstop.csh ..etc.
I am Installing fresh Oracle 11G.What could be the problem?
Could you please give me some hints.
Many Thanks
Mete

Make sure you unzip both zipfiles into the SAME directory, e.g.:
cd /<whatever>
$ unzip aix.ppc64_11gR1_database_1of2.zip
$ unzip aix.ppc64_11gR1_database_2of2.zip
$ cd database
$ ./runInstaller
Werner

RAC Installation on AIX 5.3 oracle(10.2.0.4.0)

Hi,
I am planning to setup RAC on AIX 5.3 in oracle 10.2.0.4.0
Please provide me any document for step by step installation of RAC on AIX 5.3 in oracle 10.2.0.4.0.
If possible provide me metalink document ID.
Thanks

Hi user;
Please check below notes and links:
IBM General Parallel File System (GPFS) and Oracle RAC [ID 302806.1]
RAC Assurance Support Team: RAC Starter Kit and Best Practices (AIX) [ID 811293.1]
RAC: Frequently Asked Questions [ID 220970.1]
I also suggest check below googling which has very great notes:
http://www.google.com.tr/search?hl=tr&source=hp&q=RAC+on+AIX&aq=f&aqi=&aql=&oq=&gs_rfai=
Regard
Helios

Oracle 11g R2 Grid Control Installation on AIX 6

hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & Regards

user13672598 wrote:
hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & RegardsHi
Grid Control is only available in 11GR1.
I have an installation walkthrough on my Blog. It is on http://managingoracle.blogspot.com in the section September 2010
There are more related Blog entries also.
Success!!
FJFranken
Edit: P.S. Welcome to this Forum
Edited by: fjfranken on 11-jan-2011 6:18

Oracle 9i Rel 2 Installation on AIX---JDK Directory

Oracle 9i on AIX 5.3
Message was edited by:
Maran Viswarayar

slibclean is very AIX specific, non-direct related to Oracle software.
Common error of the AIX beginners.
But as far as I remember, when you launch the installer, a message must advise you to run this command, and you should confirm (press 'enter' key) once it's done.
the reason i missed out step in the README.txt Common errors of beginners ;-) Even if you think you are experienced guy, you should read the doc as well, just to be sure do not forget any steps.
Case sensitive... one of the most common error of the Unix beginners.
Moreover ,take care do not start one instance in upper, one other in lower case.
One more thing : don't take it wrong, but if you have no specific question and want to share your experience, you should blog instead of post in the forum.
Nicolas.

OBI Installation on AIX

Similar Messages

Maybe you are looking for