OBI Publisher problem

Hi all
When I try to log on to the oracle bi publisher I get following error:
The server can not be used due to a configuration error, please contact the administrator. If you are the administrator, please consult BI Publisher user guide for proper configuration.
oracle.apps.xdo.security.ValidateException
It is probably important to know that the oracle bi server and the oracle bi webserver are installed on 2 different machines.
Does anyone know what I can do to resolve this?
Thank you

This error is during log on correct?. Can you let us know your setup? Am i right in assuming that OC4J, BI Server, BI Publisher are all installed in one machine and BI Presentation Services is installed in another machine? Not sure what could be going wrong. Your installation steps can give more insight into how BIP was configured.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Similar Messages

Webbinding of OBI Publisher failing (OC4J contained into OAS)

Hi
I;m deploying OBI Publisher (earlier XML publisher) xmlpserver.EAR using OC4J contained into Oracle Application server. The deployment is getting successful. But when Binding Web Modules to a Web Site After Deployment it is giving me an error
BindWebApp error: oracle.oc4j.admin.jmx.shared.exceptions.JMXRuntimeException
Anyone of you have ever faced this problem. Do I need to put certain jar files in shared library.
Regards,
Parwez

Solved it myself.
For the benefit of others:
It is possible to use oracle_proxy plug-in for OC4J stand-alone.
Crucial points for the configuration are:
- oracle_proxy config file specified correctly
- xmlpserver roles specified correctly
- right ports specified in instanceconfig.xml and xmlp-server-config.xml
Regards,
Michal

OBI Publisher 11.1.1.5 install questions

Hello,
I am new to OBI Publisher. I need OBIP for production PDF reports that are initiated through an APEX webpage.
I am installing all of these on the same server:
11.2.0.2 database
Oracle HTTP Server (OHS)
OBI Publisher
I am having trouble installing OBIP. I ran the 11.1.1.5 RCU and selected the OBI component/schemas. The RCU went fine. However, at the end of the OBI install, I received an error at the "Creating ASInstance" step.
Here is a snippet of the error log:
[as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000JGFm4uPFw000jzwkno1ErHoD00000Q,0] Created ASInstance. Calling opmn start command
[as] [ERROR] [] [oracle.as.provisioning] [tid: 35] [ecid: 0000JGFm4uPFw000jzwkno1ErHoD00000Q,0] [[
oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
Operation aborted because of a system call failure or internal error
at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:254)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:81)
Any assistance is greatly appreciated.
Thanks,
Reid

Reid -- I suggest you log a service request with Support for this issue
Mike

Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

Hi Goutham,
I am facing the same issue. Please let me know how you have resolved it.

OBI Publisher 11.1.1.5 Desktop add in not showing in MS word

Hi Experts,
I have installed OBI Publisher Desktop 11.1.1.5 and OBIEE 11.1.1.5,
I worked with Publisher, and created template and reports.
Once I tried to insert pivot table into template and clicked on preview button,
I lost the Add-in into MS word 2007,
I have reinstalled both MS - Office 2007 and BIP Desktop but didnt got Add-In in MS-WORD,
Thanks in Advance

Reinstalling Office is a bit extreme. All you needed to do was click on the Office button and view add-ins.
Similar to:
BI publisher on Microsoft word dissapeared

Publishing Problems - a Solution?

For a long time I'd sympathised with all you people who'd been having publishing nightmares, even though I've been updating pretty much error free since iWeb 1.0
Then last night after updating my blogs and making a few changes, I finally got the dreaded error messages. Tried a few times, got frustrated, and decided to sleep on it.
Same this morning ... grrr ... but then I noticed that my iDisk had failed on auto-synchronisation.
I'd only mounted my iDisk recently to amend my Podcast feed, so on a hunch I unmounted iDisk, rehit the Publish button in iWeb, and holy shmoly – it worked straight off!
I reckon that publishing iWeb kicks off the iDisk auto-sync, and then you've got a conflict with iDisk and .Mac trying to outsync each other.
Anybody else found this? if this solves publishing problems for a few of you then great. If it works for a lot of you, even better. If the majority of you get sorted, then that's a revelation!
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

My message to Apple stated:
"My pages go through the "create" process then start
on the "publishing" process then come back with an
error message that tells me to check my internet
connection (which is fine at 2 different locations. I
spent 13 hours fighting this yesterday. It has
created a major problem for me -- and this just after
I paid an extra hundred dollars to upgrade my
broadband. Your telephone people tell me you're
working on this. Please advise when it will be fixed
so I don't waste another 13 hours today."
Regards,
Richard M.
Richard, thank you for writing this. I would like to know how this all shakes out, and I am glad that it is an Apple server problem and not mine.
Meanwhile, I want to say how helpful it is to have this iWeb forum, and also thank the very generous and thoughtful souls who take the time to help beyond what normally would be expected. Those people know who they are, but I also am grateful to everyone.
For example, I was greatly relieved to read that I was not the only person getting Network Failure messages, since it meant that probably I was not working with a defective application -- one that started out fine but somehow went south on me and would not be replaced by Apple. This may seem a trifling thing to some, but when you are in a spot that you perceive as Hot, assurance from the outside is very much appreciated.
I hope that when you all finish your websites, you post the URL so we can all see it; after all, in a sense we are all comrades in arms (because sometimes it can seem like a war, due to the Fear Factor) and our fates are somehow connected even though we are all so-called strangers.
— Lorna in Southern California

Unexpected Publishing Problems

I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
Please help me!
Ruben
G4 17 inch Powerbook Mac OS X (10.4.5)

Here's the latest...
I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
Wish me luck all. I'll keep you posted.
Ruben

Publish Problems

More Publish Problems!
Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
Sometimes it works and most of the time it will not publish? What can I do?
Thanks
David
imac G5 and an older G5 + a Powerbook and an iBook Mac OS X (10.4.7)

Oh my god I am not a lunatic idiot after all!
I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
I am currently waiting for Apple Support to " get back to me"
MacBook 1.1 White 1.83ghz iBook 12 iBook 14 Mac OS X (10.4.7) Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

OBI publisher on Jboss Server AS7 [login failed]

Hi, I've deployed OBI publisher on Jboss Server AS7 but when i try to authenticate with Administrator/Administrator the response is login failed. Thanks for your support i'm blocked

Thank you for the replies and I am trying to answer the questions in your replies here
Kranthi : To open in online mode,the BI server should be up so it accepts the password and then directs you to the layout. That is the case, I have OBI server up running and accept login from Answers page.
Kranthi: first you should go through about offline/online modes before proceeding further.You can go through this from the BI answers user guide. The BI Answers user guide I found is OBI Answers, Delivers, and Interactive Dashboards User Guide, B31767-01 for Version 10.1.3.2. I could not find info for security management or login/password. Can you be more specific?
Srinivas Malyala: Cross check are you accessing Linux Box rpd on WindowsWhich credentials are you using LDAP or DB etc
Have you properly configured DSN to access Linux RPD. >
I am not sure how OBI RPD authenticate logins. I am not using LDAP. I do not have a user Administrator in my Oracle database. Thus it does not appear authenticated with DB.
I have a DSN configured on the window box, and be able to import database objects.
Srinivas Malyala: Can you update us exact error message. The only message is "Logon failed." Too bad I cannot attach a file to show the message box. But you can get the same message when you login to the window Admin Tool online or offline with a wrong password.
OBIEE developer : chk whether the rpd property is read only.. How? But I know if I open it offline, it it says the rpd is read-only. That is because it is opened by the server.
OBIEE developer : or try this once if all fails to reset the pass..http://obieetricks.blogspot.com/2009/08/obiee-tips-tricks-for-ease-in.html >
Like to try it but afraid get things more confused before I understand what is going on. I have not loss my Administrator password, I can login offline, I can login to SH Answerers pages.
Is offline suppose to have the same password as online?

Where is OBI Publisher log

Like in OBI Answers where one can find SQL log in Session Management, where can one find SQL log for OBI Publisher?
Thanks

You don't have the same system than in presentation service.
You must set the log level as debug in Admin > Server Configuration page.
Restart BI publisher and you will see all debug information on the OC4J console.
You can also configure a debug level with a file. See configuration with EBS.
http://blogs.oracle.com/xmlpublisher/2007/05/get_logging.html
Cheers
Nico

OBI Publisher display user role

Hello,
I have googled for a few hours but cant find a global variable to display the user group(s) on the OBI Publisher report.
Is that possible without setting up a session variable in the repository (because right now we use OBI without the BI Server repository). If it does not work, how
do I access a OBI Repository session variable in OBI Publisher? From somewhere I need to get the runtime session user groups.
Thanks

The LDAP is configured correctly now. I created a BIConsumer_new catalog group in the presentation services admin console. I can use that
console to set the permissions for the BI publisher report (somehow it does not work when I try to set the permissions using the bi publisher admin page - the permissions window does not open).
the question is still out there. how can I query with that catalog group OR ldap group in the BI Publisher data model?

OBI Publisher Data Template

Hi all
Please can some one tell me where can i find description about Data Template .
I want to call a PL/SQL Proc inside some package and get data from it.
I am using OBI Publisher to create new report and defining data model in it.
Please guide me to some good online tutorial ablut data templage.
Thanks a lot
Amit

Hi,
You can get some info about DataTemplate (structure etc.) in OBI Publisher Report Designer`s Guide.
If you want to call PL\SQL procedure you should define your default package and then call proc from it in DataTrigger section.
Read this guide for additional info and examples =)

Another user with publishing problems -- proof that it is .Mac related

Just before Christmas I started getting the dreaded "Publish Error: There was an error updating .Mac" message every time I published. I read all the previous posts, even the ones dating back to October. I think I can conclusively show that the problem is on the .Mac backend, and not at all on my computer. Here is what I did: first, I created a temporary .Mac account; second, I moved my Domain file for safe keeping and did not replace it; third, I logged into the Guest User account that is now available in Leopard. I then attempted to publish a single page website from iWeb from both my normal login and the guest login to both my normal .mac account and the temporary one. (To switch between .Mac accounts I used the system preferences panel when iWeb was not running). The results are as follows:
.......................Regular .Mac.......Temporary .Mac
Normal Login..Publish Failed......Publish Succeeded
Guest Login.....Publish Failed......Publish Succeeded
This tells me that there is no problem on my computer, or with my network connection, and the problem is squarely on the .Mac side of things.
I sent this message off to the standard help page, and got the standard form letter back. In reply I asked them to reset my .Mac account so it would appear "new". I'll see what they say.
It would be interesting to see how many other people with "publish" problems can repeat this test.
-=[doug]=-

I've done what appears to be the standard littany of things:
1) Confirmed that I am running the latest version of iWeb (2.02) on 10.5.1 (although the problem persists when using my backup of 10.4.10 that includes the ilife update)
2) Changed my .Mac password, even though it was less than 20 characters
3) Published all of my previous website to the temp .mac (in chunks to avoid the space limitations)
4) Successfully published my site to a folder
5) Successfully uploaded that folder to my iDisk
6) Attempted to republish and republish all multiple times
7) Deleted iWeb's plist
8) rebooted
9) logged out and back into my .Mac account
10) confirmed that there is no password protection on my site
11) confirmed that there are no comments on my site
12) deleted assets.[membername].plist from the Domain file
13) Confirmed that my password in Keychain is correct
14) Run Keychain First Aid
15) deleted Sites.RSS from my iDisk
16) deleted the website and index.html from the iDisk
So, I have done a fair amount of ground work here, and am not just spouting off against Apple/.Mac. However, I still claim that the fact that I can successfully publish to a temporary .Mac account while the exact same iWeb content fails when being published to my normal .Mac account implies that there is something wrong with my .Mac account -- it is almost as if Apple is trying to eliminate its paying customers (since there are no problems with the free account).
-=[doug]=-

Contribute CS4 and CS5 file transfer (publish) problem on Windows 7 64 bit

Have a problem with Contribute CS5 and CS4 on Windows 7 64 bit where upon editing a webiste for example to add a new page (or edit an existing one) and then clicking on "publish" a blank page appears on the website. To explain this further, If i make the required changes to the page and select the option to publish the file later then the file wirtten to the PC appears to be ok and has all the changes, but as soon as I publish it, only a blank page appears on the web server. ie the upload (ftp) process does happen but the content of the page is being stripped out somewhere during the filt transfer process.
I have editied the same site with CS4 on windows XP without any problems.
Any suggestions would be appreciated
Thank you
Chris

I seem to have solved the issue by downloading this install file
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe
which installs successfully.

Publishing Problem with WTP and Tomcat 5.5

Hello you all,
I've got the problem that my Eclipse does not publish my Hibernate (*.hbm.xml) files.
In the concerning folder, I do only find the .class-files.
We're using Eclipse (3.3.2), Maven 2, Tomcat 5.5
Urgend help is needed as we have to distribute our Software till the end of the week :(
Thanks in advance

I'll try reposting, now that I figured out how to format it:
import java.util.ArrayList;
import java.util.List;
import java.util.concurrent.SynchronousQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
public class ThreadTest {
     private static final int MAX_RUNNABLES = 1;
     private final List<Runnable> runnableBuffer = new ArrayList<Runnable>(MAX_RUNNABLES);
     private final ThreadPoolExecutor myThreadPool =
          new ThreadPoolExecutor(MAX_RUNNABLES,
               MAX_RUNNABLES,
            0L, TimeUnit.SECONDS,
            new SynchronousQueue<Runnable>());
     public ThreadTest() {
        //myThreadPool.prestartAllCoreThreads();
        for (int i=0; i<MAX_RUNNABLES; i++) {
            runnableBuffer.add(new Runnable() {
                public void run() {
    public void start() {
        for (Runnable r : runnableBuffer) {
            System.out.println("corePoolSize: " + myThreadPool.getCorePoolSize());
            System.out.println("maxPoolSize: " + myThreadPool.getMaximumPoolSize());
            System.out.println("poolSize: " + myThreadPool.getPoolSize());
            System.out.println("taskCount: " + myThreadPool.getTaskCount());
            System.out.println("Starting runnable ");
            System.out.println("");
            myThreadPool.execute(r);
        System.out.println("All runnables have started");
    public static void main(String[] args) {
        ThreadTest t = new ThreadTest();
        t.start();
}

OBI Publisher problem

Similar Messages

Maybe you are looking for