OBI SE1 Installation Problem - Installation loops

Hi all,
I've been trying to install an OBI se1 on a new server with nothing on it but Windows server 2003.
I've gotten up to the "Installing oracle business intellligence 101..3.2.1" and the Installation seems to be looping through the installFromOUI.bat and running it again and again.
I've been at it for a whole day now...
Help!!!
Tomer

How long have you waited after 98% installation screen? It usually takes a good while for post scripts to execute.
-Amith.

Similar Messages

Installation Problem "Installer konnte nicht initialisiert werden"

I have CS6 Design & Web Premium. I used Acrobat X from the package for several month. I installed test version of Acrobat XI. After test period I deinstalled it and wanted to install Acrobat X again. But every time I start the Set-up.exe I get a message "Folgende Probleme sind aufgetreten: Installer konnte nicht initialisiert werden...." (see screenshot). I tried several times to restart, but it is not working. Could not find a useful help so far in FAQ.

Mal hier probieren und dann einfach nochmal:
http://labs.adobe.com/downloads/acrobatcleaner.html
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium

Flash Pro Installation Problem: Installation Location

Hi,
I am trying to install a trial copy of the software unto a VM
Desktop Windows XP machine. I want to install it on drive E:. But
the install appears to want to install at least 626.2MB worth of
files on C: drive (618.8 are apparently going to go to E:). Is
there anyway to tell the install to put all files on E:? There is
not enough space on C: and the installation program complains
"Installation cannot continue because there is insufficient space
available on one or more of the select drives."! How do I unselect
C:?
Thanks

Hi Coronos1
If you receive a message that stated “the file
doesn’t exist” it may be that the reset_min.cmd and
SubInACL files are not located in the same directory. Here are the
instructions that many have been using to repair the Windows
registry.
Please download Microsoft’s tool to your desktop.
http://www.supportflash.com/reset_min.zip
1. unzip the “reset_minimal.cmd” and the
“subinacl.exe” to the desktop
*** Make sure both files are on the desktop
2. Close out all applications
3. Run the “reset.cmd” file
4. It will open a DOS like terminal and start running through
registry keys
5. When it is finished it will say “press any key to
continue”
6. At this point you can download the latest Flash Player
from here: www.adobe.com/go/getflashplayer
If you required Adobe support, I can help you resolve this if
you open a case from here. Please reply with the case number.
http://www.adobe.com/support/contact/

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

MinSAP Basis installation problem

Hi Gurus,
I am a total newbee to SAP and ABAP and am trying to install minisap on my pc so that i can practice ABAP.
I have installed the MS Loopback adapter and have updated the Hosts files as follows
127.0.0.1 localhost
10.10.10.10 MYCOMPUTER
The name of my computer is "MYCOMPUTER"
During installation i get the following error message
Error: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup
       can not get information for host "MYCOMPUTER"
Error: CENTRDBINSTANCE_NT_IND ColdKeyCheck
       Phase failed
Error:Main {}
       Installation aborted
Please can anyone help. I have checked existing posts and have tried some of the solutions but it has not helped. I still get the same problem.
Thanks in advance.

Hi,
[|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/minisap-46d-installation-problem-1529311#]
Solution to your problem..... I've tried just about everything
to get minisap running on Vista. Finally to get it to work you
need to install Virtual PC 2007. Create a Virtual XP PC with
(512mb ram if possible) and 10gb hard drive.
After creating the virtual XP. Start it and insert your XP Cd it
will install XP on your Virtual machine. After that remember to
follow the right installation procedure (1)Loop back Adapter, IP
Address (2) Host File editing (3) Sap DB Installation (4) Sap
GUI installation (5) Enjoy programming on SAP
Cheers.
...Reward if useful.

Minsap Installation problem

Hi friends,
i am getting this error while installing minsap on my home PC.
Error: CALCRAM_NT_MSS ColdKeyCheck 2 178
Phase failed.
Error: Main {} 2 178
Installation aborted.
any solution?
thanks in advance...

Hi,
[|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/minisap-46d-installation-problem-1529311#]
Solution to your problem..... I've tried just about everything
to get minisap running on Vista. Finally to get it to work you
need to install Virtual PC 2007. Create a Virtual XP PC with
(512mb ram if possible) and 10gb hard drive.
After creating the virtual XP. Start it and insert your XP Cd it
will install XP on your Virtual machine. After that remember to
follow the right installation procedure (1)Loop back Adapter, IP
Address (2) Host File editing (3) Sap DB Installation (4) Sap
GUI installation (5) Enjoy programming on SAP
Cheers.
...Reward if useful.

Problems with installation / de-installation of WAS AS 6.20

Problems with installation / de-installation of WAS AS 6.20
Hello,
is anyone able to help me ?
The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
start massage:
Warning: adaextractlctool_nt_ada InternallnstallationDo
SAPCAR returns with error 29.
Error: adaextractlctool_nt_ada InternallnstallationDo
Phase failed.
Error: Main {}
Installation aborted.
end massage.
massage above percent-banner on the left down-side:
no R3SETUP connected.
In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
"installation of sap db server finished successfully...." l.
The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
my system:
Acer Aspire 5100
Ram 1 GB
HD 160 GB (140 GB frei)
Win XP prof.
How can I solve the installationproblem ?
I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
b) a second entry SAP Front End (also behind just a html-link / no deinstall-button)
Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
Another way I tried: on the SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
Please, I need help, because I need the system as 6.20 for a trainning.
Much thanks,
Regards, Lars Stolpe
MfG Stolpe

obsolete question ...

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

OBI SE1 Installation Problem - Installation loops

Similar Messages

Maybe you are looking for