OBIEE 10g - Ability to overlay Area Chart?

Hi Experts,
I am using OBIEE 10g. I have a requirement to plot Total Market Units with Brand units over time in an Area Chart. The requirement here is that the area of Brand Units should overlay on the Market units measure thus signifying that Brand units is out of the total Market Units, but when this is being plotted into an Area Chart, the Market Units is stacked on top of the Brand Units therefore the chart's total (highest point) on the Y Axis is Market Units + Brand Units but I want this total to reflect only the Market Units figure.
Is there anyway in an Area Chart to show the figures for Market Units and Brand units separately (when mouse rollover) but on the Y axis, it's just showing the Market units's figure?
Sorry if I had confused anyone but I had tried to explain the requirement as best as I can.
Thanks in advance!
Chris

Using logical query filters can convert to sql but it should not with XML.
This is expected behavior for logical queryies only.

Similar Messages

Obiee 10g change the subject area

Hi,
I change Subject Area (Answers -> Advanced -> Request XML & SQL Issued).
The modified report right but the filter type has been convert to filter sql .
What could be the reason?
I would appreciate your help
sin

Using logical query filters can convert to sql but it should not with XML.
This is expected behavior for logical queryies only.

Challenges while Upgrading from OBIEE 10g to 11g

Hi Gurus,
This is Kiran again. This time I am back with the upgradation issues. We have a client which is currently on OBIEE 10g. All components are already configured in OBIEE 10g with client on RPD, Catalog and implemented all security levels for those.
Now the challenge is to upgrade all activities which we have configured in OBIEE 10g. I have seen lot of stuff online and understood how to upgrade from OBIEE 10g to OBIEE 11g by simply clicking on ua.bat file. But I am unable to understand the process how it is upgrading the securities and environments.
Can anyone help me out by providing necessary stuff I need to take care of before taking the decision to upgrade from OBIEE 10g to 11g.
And also please clear me whether we will have any challenges in upgrading process. If yes, then what kind of challenges we will face and what kind of necessary steps we need to implement to resolve it.
What kind of Architecture we need to follow?
How Schedulers will get upgraded?
Please help me out with your real experiences (Not the online websites). Your response will be highly appreciated and it will help lot of OBIEE professionals who are in the process of upgradation.
Thanks in Advance to all OBIEE GURUS.
Kiran

Hi Valli,
There is really great information available in this link. But I would like to know whether any one faced any issues while upgrading from OBIEE 10g to 11g. Please do share us few issues....
Edited by: 949144 on Nov 27, 2012 9:44 AM

Obiee 10g - How to Increase the default size of Bubble chart radius axis

Hi,
I have an requirement of creating bubble chart in obiee 10g.
When i was developing the bubble chart i noticed that there is no option of increasing the size of the bubble.
When the measure value is low the bubble is not getting displayed.
Kindly help me with any solution.
Regards,
Abdul

Hi Alok_Aswal,
In SQL Server Reporting Services 2008, the Bubble chart has several custom attributes which allow us to control the size of the bubbles. "BubbleMaxSize" and "BubbleMinSize" attributes allow us to define the size of the bubble in the chart series. The values
set are in percent of the whole chart size. We can find those attributes in the property pane by selecting bubble series and expanding 'CustomAttributes' properties.
And based on my research, the Marker size has a wide range, but for some reason once we get to around 8 the bubble in the legend will not grow any bigger. So in your scenario, we can set the Marker size to 8pt, then set the appropriate “BubbleMaxSize" and
"BubbleMinSize" based on the chart size to make the size of both the bubble are the same. For example, we can also set “BubbleMaxSize" and "BubbleMinSize" to 8, then manually adjust the chart size until both the bubbles have same size.
Beside, we can delete the original legend, and drag a tablix to the right of the chart. And then insert the corresponding data and color to tablix to let it looks like a legend. For more details information, you can refer to the link below to see Mike’s
post:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cbf2f48e-fe40-4c1b-b82a-d40fd269f2ef/setting-custom-colors-on-a-column-stacked-bar-chart?forum=sqlreportingservices
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

OBIEE 10g Drill Down Chart From Axis Label

Hello All
Does any one know if OBIEE 10g can drill down values in a chart by clicking the axis labels of the charts.
In other words, if there was a bar chart with two bars, one for May and one for June, could a user click on the label 'May' or 'June' to drill down in the chart or can OBIEE only drill charts by clicking on the actual bar in the chart?
Thanks!

Hi,
In 11g chart navigations have changed.They are now moved to the criteria level and are therefore not available in results view.In your case, navigate to the criteria ->interaction tab and add the target as action link.
Refer-
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/navigation-between-charts-obiee-11g-4086065
Hope this helped/ answered
Regards
MuRam

Bubble chart in OBIEE 10g

Is there any way to increase the bubble size of bubble chart in obiee 10g? Like whether we can use javascript or HTML Code to achieve it?

Hi,
Thanks for reply.
But I cannot understand your point. My requirement is something different. In the X axis I have project_number and y axis I have measures like budget,commitment & incurred_cost. Now the vertical chart gives me the summarize view. Now for a particualr project say AA, I can see three vertical bars showing budget,commitment & incurred_cost. Now the requirement is if I click on budget bar it will popup a new window showing related details of budget which is a different report, if click on commitment bar it will open commitment report in another window and so on.
I am not able to implement this like multiple navigation from a bar chart.
Can you please help on how to do this in OBIEE 10g.
Thanks
Titas

OBIEE Area Chart with Line Graph

Can you create an Area and Line Graph together in one chart with OBIEE (rather than with the bar graph and line chart combo)??

Did you mean a Trendline? If that is the case, right click on any of the areas in the area chart and select Trendlines from the context menu.

Area Chart View in OBIEE 10 g

I have a Area chart view which shows sales volume by Product by Time. Time Dimension is plotted on X axis and Product is used as Legends (Measure Labels in Pivot Table Chart View). The Problem is user wants to display the Legends as Data Labels on Rollover. Right now when we roll over we will see Sales Volume. Is there any work around for this?

Hi,
Drill in place should work. Because that is the purpose of it. Try one thing- Keep one single report in the section and give drill in place and check.
If this is not working then you need to create a separate page and give navigation to that page, so that the report appears to be in the same page.
Please let me know further.
Hope this helps you.
Regards
MuRam

OBIEE Chart Grid - Hide (OBIEE 10G)

Hi,
Business requested to hide the horizontal and vertical grids in OBIEE 10g version. Any inputs to hide.
Thanks,
Raman Kumar P.

you can go to Answers--> Click on Column properties-->Format Headings-->Make "Boarder Position" = None.
and do the same for
Format Values-->Make "Boarder Position" = None.
Regards
HG

OBIEE 10G SSO Issue

HI
We have configured OBIEE 10g on IIS (ver-6) server. We have a business requirement where we need to integrate OBIEE with another ASP.NET application. So, user should log in once and to view OBIEE reports he should not log in again.
Now we have checked GO URL option given in Chapter 11 of Oracle® Business Intelligence Presentation Services Administration Guide. But problem is our company policy does not allow us to pass Password in HTTP URL. So we cannot use that solution.
We are trying to use SSO and referred to Chapter 8 of Deployment Guide. We followed all the steps give in that chapter
Also, we modified isapiconfig.xml and entered <CredentialStore> paramaters in it.
But when we Go to Analytics URL (for remote machine) Login screen show "Not Logged In" message.
currently we are using REMOTE_USER method as it is given in documention.
So we did everything by the book. Now my question is:
1) We do not have any SSO server/Product, is there is any way we can integrate OBIEE application to other ASP.Net application on another IIS SERVER? There was a suggestion that if we pass remoter_user parameter in HTTP header, is it possible to work this way.
2) Is it possible that if we host both the ASP.NET and OBIEE 10g on SAME IIS server there is way to integrate them using SSO without any SSO server again by passing remote_user HTTP header
3) What options do we have to integrate ASP.NET application and OBIEE without using SSO server itself and without using GO url method as we cannot pass password in header. Will Cookie Enabling Method can work in this scenerio.
4) Is there is way that OBIEE directly take windows ID without SSO server, I know question might sound stupid as in prerequisite i read that we need “SSO system of Choice” but we need to be absolutely sure about our option and possibilities.
we also reffered to following thread:
10g - how to configure sso with iis-
But, this one seems to be unresolved So kindly help
Regards
Saurabh

Hi Praveen,
Thanks for your response. I was doing a bit of R&D on SOAP API, tell me if i am wrong.
In case we use SOAP API to Authenticate then we will get Response in terms of XML and we have to write our own code to render it in tables or charts.
We dont want that we just want to automate the Authentication part and want to use OBIEE use Interactive Dashboards. Kindly suggest if I am wrong and if we just write a piece of Code to get the Authentication done and it will not affect the further use of OBIEE.
Regards
Saurabh

Horizontal Bar Chart and Overlaying Line Chart

I am using SSRS 2008 and developing my reports in BIDS.
I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
If so, are there any suggestions how to get around this?
Thanks.

Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
Best regards,
Crank

OBIEE 11.1.1.6 Paretto Chart drill down

A Pareto chart when created using OBIEE 11.1.1.6 drills down to the incorrect hierarchial map. This was a bug with OBIEE 10g:
BUG:8769813 - DRILL DOWN IN PARETO GOES TO WRONG CHILD
NOTE:517727.1 - pareto charts
It was originally an issue with the use of Corda charts. This was supposed to be fixed with the move to OBIEE 11g but it does not seem to be so in our case, since we encounter the same error.
Original OBIEE 10g error: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?_afrLoop=738674755173621&id=1200914.1&_afrWindowMode=0&_adf.ctrl-state=k53hrt132_215
I will look around on the forum, but any insight would help

I will try and explain the sequence of occurances on an Oracle "Sample Sales Lite" analysis, in case it needs to be recreated.
It is a very simple analysis using the “Sample Sales lite” subject area provided by Oracle. The criteria is just company from within offices as the dimension and revenue from within base fact as the fact.
The typical hierarchial drill path for the “Company” dimension within offices as per the RPD definition is Company > Organization > Department > Office.
When viewed as a table this drill path works perfectly fine. When we represent the same as a Paretto chart, on clicking on “Stockplus Inc”, the output drills down to a breakdown of "Genmind Corp" instead. This is the same when viewed as an analysis and on a dashboard.
I have seen similar occurances with bubble charts as well. Do let me know.

Grid lines appear in bold format in Graphs - OBIEE 10g

Dear Experts,
I am facing an issue with the grid lines in the graphs in reports.
All the graphs in reports(webcat) are appearing with 'bold GRID lines' instead of normal grid lines which in turn is affecting the look and feel of the graphs in the webcat. Is there any way to eliminate this by setting any parameter in XML files?
I am using OBIEE 10g version. Kindly let me know your inputs so as to eliminate this bold grid lines in all the graphs.
Thanks,
Sam.

Hi,
Refer this and it might be help you.
Re: Remove grid lines by default in chart view
Thanks,
Satya

Error in reports after upgrade from OBIEE 10g to 11g : [nQSError: 14025]

Hi All, We upgraded RPD and web catalog from OBIEE 10g to 11.1.1.5. I see the following error while running few reports.
Error: State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A
general error has occurred. [nQSError: 43113] Message returned from OBIS.
[nQSError: 14025] No fact table exists at the requested level of detail:
When I add an user under BIAdministrator Application role and login, all the reports work correctly.
I verified Oracle BUG fix (11850704) document and tried to make changes as suggested.
Please suggest me if this issue is related to 10g to 11g RPD upgrade or are we missing any privileges?
Also should I add every user to BIAdministrator role to avoid this issue?
Thanks in Advance

Hi,
First of all i am not familiar on linux box.
I tried in windows environment the rpd is deployed with out any errors.
But i ran the ua.bat file in the following path
\MWHOME\Oracle_BI1\bin\ua.bat.
while i am running in oracle_common\bin\ua.bat is not responding in my local system.
Please Mark if it helpful.
Thanks

EPMMaster.rpd Fusion Pack migration from OBIEE 10g to 11g

We have successfully installed OBIEE 10g and 11g on Windows 2008 32bit servers. On the 10g Installation, we have applied the Fusion Pack EPMMaster RPD file and it connects successfully to our EPM warehouse. We want to migrate the Fusion pack to 11g which is also setup on the same platform. Per the instructions in the documentation, we have copied the files (RPD file and Webcat folder) to the 11g server. We run the UA.bat file and it proceeds to start copying the files over fom the RPD and WebCatalog to the new system. It completes this process, but then hangs on starting the Oracle BI server - it never gets beyond that.
We will be purchasing the EPMMaster RPD and know it is not available yet for 11g – however we’re trying to get ahead of the curve a bit and manually fix the items in the presentation layer that will not render correctly in 11g
upgrade exception occurred
Unable to start process: instance1: coreapplication_obis1
One thing that I noticed – Since the UA tool does not completely finish --
RPD size on 10g – 42,675KB; 11g – 6,375KB
I manually change the webcat in Enterprise Manager to the EPMMaster catalog -this actually caused additional errors on restart.
Has anyone attempted upgrading a delivered RPD to 11g?
Thanks in advance -

This is a known issue that we have worked through with Oracle tech support. The Dimension Deduction.Deduction Sid causes an error that prevents the UA tool from completing the upgrade process. There are a couple of ways around this, but the fastest is to simply delete the Dimension, the two related hierarchies and the fact table that is joined to this dimension. Physical table do not need to be touched however. There are still issues once it’s moved to 11g, but those can be addressed post migration. Thanks much to the Oracle support team for helping us out with this issue!

OBIEE 10g - Ability to overlay Area Chart?

Similar Messages

Maybe you are looking for