OBIEE 10g Font problems

Dear all gurus,
I used OBIEE10 and installed in my Win7 64bit computer. It is ok when I see some reports that are written with Eng language.
But when I see other reports that are written with my local font (Myanmar font), For input string: "x86" this error is came out although I did font mapping.
Please help me.
Thanks in advance.
Su

bump

Similar Messages

  • OBIEE 10g installation problem on Windows Vista

    Hi,
    I tried to install OBIEE 10.1.3.4.2 on Windows Vista, but the installation got hanged with the following error: I am very new to OBIEE and could not make out the error... could anyone please help me out ?? Thanks in advance!!
    ------install file error-----------------
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizard.platform.win32.win32service.WindowsServiceControlAction, wrn, ServiceException: (error code = -120003; message = "Access is denied.
    (5)"; severity = 0)
    STACK_TRACE: 15
    ServiceException: (error code = -120003; message = "Access is denied.
    (5)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32ServiceImpl.controlNTService(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
         at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
         at com.installshield.wizard.platform.win32.GenericWin32Service.controlNTService(GenericWin32Service.java:93)
         at com.installshield.wizard.platform.win32.win32service.WindowsServiceControlAction.execute(WindowsServiceControlAction.java:67)
         at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
         at com.installshield.wizard.StandardWizardListener.currentBeanChanged(StandardWizardListener.java:106)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1564)
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows .*" version="." arch="."
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition, err, ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
    STACK_TRACE: 23
    ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32ServiceImpl.serviceExists(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
         at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
         at com.installshield.wizard.platform.win32.GenericWin32Service.serviceExists(GenericWin32Service.java:178)
         at com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition.evaluateTrueCondition(WindowsServiceExistsWizardBeanCondition.java:86)
         at com.installshield.wizard.WizardBeanCondition.isMet(WizardBeanCondition.java:149)
         at com.installshield.util.ConditionSet.evaluteANDExpression(ConditionSet.java:98)
         at com.installshield.util.ConditionSet.isMet(ConditionSet.java:88)
         at com.installshield.wizard.WizardBean.conditionsMet(WizardBean.java:312)
         at com.installshield.wizard.ConditionalWizardTreeIterator.accept(ConditionalWizardTreeIterator.java:45)
         at com.installshield.wizard.StandardWizardTreeIterator.accept(StandardWizardTreeIterator.java:174)
         at com.installshield.wizard.StandardWizardTreeIterator.getNext(StandardWizardTreeIterator.java:73)
         at com.installshield.wizard.ActiveWizardTreeIterator.getNext(ActiveWizardTreeIterator.java:36)
         at com.installshield.wizard.ConditionalWizardTreeIterator.getNext(ConditionalWizardTreeIterator.java:40)
         at com.installshield.wizard.MultiWizardTreeIterator.getNext(MultiWizardTreeIterator.java:68)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1571)
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition, err, ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
    STACK_TRACE: 23
    ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32ServiceImpl.serviceExists(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
         at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
         at com.installshield.wizard.platform.win32.GenericWin32Service.serviceExists(GenericWin32Service.java:178)
         at com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition.evaluateTrueCondition(WindowsServiceExistsWizardBeanCondition.java:86)
         at com.installshield.wizard.WizardBeanCondition.isMet(WizardBeanCondition.java:149)
         at com.installshield.util.ConditionSet.evaluteANDExpression(ConditionSet.java:98)
         at com.installshield.util.ConditionSet.isMet(ConditionSet.java:88)
         at com.installshield.wizard.WizardBean.conditionsMet(WizardBean.java:312)
         at com.installshield.wizard.ConditionalWizardTreeIterator.accept(ConditionalWizardTreeIterator.java:45)
         at com.installshield.wizard.StandardWizardTreeIterator.accept(StandardWizardTreeIterator.java:174)
         at com.installshield.wizard.StandardWizardTreeIterator.getNext(StandardWizardTreeIterator.java:73)
         at com.installshield.wizard.ActiveWizardTreeIterator.getNext(ActiveWizardTreeIterator.java:36)
         at com.installshield.wizard.ConditionalWizardTreeIterator.getNext(ConditionalWizardTreeIterator.java:40)
         at com.installshield.wizard.MultiWizardTreeIterator.getNext(MultiWizardTreeIterator.java:68)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1571)
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition, err, ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
    STACK_TRACE: 23
    ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32ServiceImpl.serviceExists(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
         at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
         at com.installshield.wizard.platform.win32.GenericWin32Service.serviceExists(GenericWin32Service.java:178)
         at com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition.evaluateTrueCondition(WindowsServiceExistsWizardBeanCondition.java:86)
         at com.installshield.wizard.WizardBeanCondition.isMet(WizardBeanCondition.java:149)
         at com.installshield.util.ConditionSet.evaluteANDExpression(ConditionSet.java:98)
         at com.installshield.util.ConditionSet.isMet(ConditionSet.java:88)
         at com.installshield.wizard.WizardBean.conditionsMet(WizardBean.java:312)
         at com.installshield.wizard.ConditionalWizardTreeIterator.accept(ConditionalWizardTreeIterator.java:45)
         at com.installshield.wizard.StandardWizardTreeIterator.accept(StandardWizardTreeIterator.java:174)
         at com.installshield.wizard.StandardWizardTreeIterator.getNext(StandardWizardTreeIterator.java:73)
         at com.installshield.wizard.ActiveWizardTreeIterator.getNext(ActiveWizardTreeIterator.java:36)
         at com.installshield.wizard.ConditionalWizardTreeIterator.getNext(ConditionalWizardTreeIterator.java:40)
         at com.installshield.wizard.MultiWizardTreeIterator.getNext(MultiWizardTreeIterator.java:68)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1571)
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition, err, ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
    STACK_TRACE: 23
    ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32ServiceImpl.serviceExists(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
         at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
         at com.installshield.wizard.platform.win32.GenericWin32Service.serviceExists(GenericWin32Service.java:178)
         at com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition.evaluateTrueCondition(WindowsServiceExistsWizardBeanCondition.java:86)
         at com.installshield.wizard.WizardBeanCondition.isMet(WizardBeanCondition.java:149)
         at com.installshield.util.ConditionSet.evaluteANDExpression(ConditionSet.java:98)
         at com.installshield.util.ConditionSet.isMet(ConditionSet.java:88)
         at com.installshield.wizard.WizardBean.conditionsMet(WizardBean.java:312)
         at com.installshield.wizard.ConditionalWizardTreeIterator.accept(ConditionalWizardTreeIterator.java:45)
         at com.installshield.wizard.StandardWizardTreeIterator.accept(StandardWizardTreeIterator.java:174)
         at com.installshield.wizard.StandardWizardTreeIterator.getNext(StandardWizardTreeIterator.java:73)
         at com.installshield.wizard.ActiveWizardTreeIterator.getNext(ActiveWizardTreeIterator.java:36)
         at com.installshield.wizard.ConditionalWizardTreeIterator.getNext(ConditionalWizardTreeIterator.java:40)
         at com.installshield.wizard.MultiWizardTreeIterator.getNext(MultiWizardTreeIterator.java:68)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1571)
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition, err, ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
    STACK_TRACE: 23
    ServiceException: (error code = -1200012; message = "Access is denied.
    (5)"; severity = 0)
         at com.installshield.wizard.platform.win32.Win32ServiceImpl.serviceExists(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
         at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
         at com.installshield.wizard.platform.win32.GenericWin32Service.serviceExists(GenericWin32Service.java:178)
         at com.installshield.wizard.platform.win32.win32service.WindowsServiceExistsWizardBeanCondition.evaluateTrueCondition(WindowsServiceExistsWizardBeanCondition.java:86)
         at com.installshield.wizard.WizardBeanCondition.isMet(WizardBeanCondition.java:149)
         at com.installshield.util.ConditionSet.evaluteANDExpression(ConditionSet.java:98)
         at com.installshield.util.ConditionSet.isMet(ConditionSet.java:88)
         at com.installshield.wizard.WizardBean.conditionsMet(WizardBean.java:312)
         at com.installshield.wizard.ConditionalWizardTreeIterator.accept(ConditionalWizardTreeIterator.java:45)
         at com.installshield.wizard.StandardWizardTreeIterator.accept(StandardWizardTreeIterator.java:174)
         at com.installshield.wizard.StandardWizardTreeIterator.getNext(StandardWizardTreeIterator.java:73)
         at com.installshield.wizard.ActiveWizardTreeIterator.getNext(ActiveWizardTreeIterator.java:36)
         at com.installshield.wizard.ConditionalWizardTreeIterator.getNext(ConditionalWizardTreeIterator.java:40)
         at com.installshield.wizard.MultiWizardTreeIterator.getNext(MultiWizardTreeIterator.java:68)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1571)
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows .*" version="." arch="."
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows NT\|Windows 2000" version="5\.0" arch="."
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="\(Windows NT\|Windows 2000\)\|\(Windows X.\)" version="5\.1" arch="."
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows .*" version="5\.2" arch="."
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:55:53 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows .*" version="6\.0" arch="."
    (13 Jun, 2012 11:56:45 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "\VC80\vcredist_x86.exe": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "\VC80\vcredist_x86.exe": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)
    (13 Jun, 2012 11:57:36 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:57:36 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows .*" version="." arch="."
    (13 Jun, 2012 11:57:48 AM), Install.product.install, com.installshield.product.actions.UninstallerJVMResolution, dbg.jvm, attempting to use the current JVM
    (13 Jun, 2012 11:57:48 AM), Install.product.install, com.installshield.product.actions.UninstallerJVMResolution, dbg.jvm, searching for a JVM
    (13 Jun, 2012 11:57:49 AM), Install.product.install, com.installshield.wizard.platform.win32.Win32JVMServiceImpl, dbg.jvm, executing launcher to resolve JVM
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.wizard.service.jvm.PureJavaJVMServiceImpl$JVMFinder, err, java.io.IOException: Cannot run program "C:\Users\MOUMIT~1\AppData\Local\Temp\ismp001\LauncherMain.exe": CreateProcess error=740, The requested operation requires elevation
    STACK_TRACE: 13
    java.io.IOException: Cannot run program "C:\Users\MOUMIT~1\AppData\Local\Temp\ismp001\LauncherMain.exe": CreateProcess error=740, The requested operation requires elevation
         at java.lang.ProcessBuilder.start(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at com.installshield.wizard.service.jvm.PureJavaJVMServiceImpl$JVMFinder.execute(PureJavaJVMServiceImpl.java:690)
         at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: CreateProcess error=740, The requested operation requires elevation
         at java.lang.ProcessImpl.create(Native Method)
         at java.lang.ProcessImpl.<init>(Unknown Source)
         at java.lang.ProcessImpl.start(Unknown Source)
         ... 6 more
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.product.actions.UninstallerJVMResolution, dbg.jvm, resolved to JVM file: null with JVM_HOME = null
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.product.actions.UninstallerJVMResolution, dbg.jvm, installing the bundled JVM
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.wizard.platform.win32.Win32JVMServiceImpl, dbg.jvm, installing JVM to C:\OracleBI\uninstall\_jvm
    (13 Jun, 2012 11:57:50 AM), Install.product.install, java.io.IOException, err, java.io.IOException: Cannot run program "C:\Users\MOUMIT~1\AppData\Local\Temp\ismp001\LauncherMain.exe": CreateProcess error=740, The requested operation requires elevation
    STACK_TRACE: 13
    java.io.IOException: Cannot run program "C:\Users\MOUMIT~1\AppData\Local\Temp\ismp001\LauncherMain.exe": CreateProcess error=740, The requested operation requires elevation
         at java.lang.ProcessBuilder.start(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at java.lang.Runtime.exec(Unknown Source)
         at com.installshield.wizard.service.jvm.PureJavaJVMServiceImpl$JVMInstaller.execute(PureJavaJVMServiceImpl.java:644)
         at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: CreateProcess error=740, The requested operation requires elevation
         at java.lang.ProcessImpl.create(Native Method)
         at java.lang.ProcessImpl.<init>(Unknown Source)
         at java.lang.ProcessImpl.start(Unknown Source)
         ... 6 more
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl$Installer, err, ProductException: (error code = 601; message="JVM not found")
    STACK_TRACE: 8
    ProductException: (error code = 601; message="JVM not found")
         at com.installshield.product.actions.JVMResolution.install(JVMResolution.java:171)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.checkUninstallerJVMResolution(PureJavaProductServiceImpl.java:4793)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4554)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
         at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
         at java.lang.Thread.run(Unknown Source)
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, target platform: name="Windows Vista" version="6.0" arch="x86"
    (13 Jun, 2012 11:57:50 AM), Install.product.install, com.installshield.wizardx.conditions.PlatformWizardBeanCondition, dbg.platform, condition platform: name="Windows .*" version="." arch="."
    (13 Jun, 2012 11:57:51 AM), Install.product.install, com.installshield.wizardx.ascii.ModifyFile, msg2, ASCII file C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\xmlp-server-config.xml does not exist and will be created.
    (13 Jun, 2012 11:57:51 AM), Install.product.install, com.installshield.wizardx.ascii.ModifyFile, msg2, ASCII file C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\server-config.wsdd does not exist and will be created.
    (13 Jun, 2012 11:57:51 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\server\Bin\installperfsas.bat": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\server\Bin\installperfsas.bat": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)
    (13 Jun, 2012 11:57:51 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\web\bin\installperfsaw.bat": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\web\bin\installperfsaw.bat": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)
    (13 Jun, 2012 11:57:52 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\oc4j_bi\bin\oc4j.cmd": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\oc4j_bi\bin\oc4j.cmd": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)

    Hi
    Thanks a lot for your help. Even after I gave all the permission to my user, it could not access the file. So finally I logged with the Administrator user, and the problem was solved, ie access was available.
    However, the installation still did not complete ... after 100% installation the screen got hanged. The error I found from the Install file is as below:
    (13 Jun, 2012 5:30:37 PM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\server\Bin\installperfsas.bat": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\server\Bin\installperfsas.bat": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)
    (13 Jun, 2012 5:30:37 PM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\web\bin\installperfsaw.bat": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\web\bin\installperfsaw.bat": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)
    (13 Jun, 2012 5:30:38 PM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\oc4j_bi\bin\oc4j.cmd": CreateProcess error=3, The system cannot find the path specified
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: Cannot run program "C:\OracleBI\oc4j_bi\bin\oc4j.cmd": CreateProcess error=3, The system cannot find the path specified
         at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
         at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
         at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
         at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
         at java.lang.Thread.run(Unknown Source)
    Could any one please help? I checked that these folder paths have not been created under OracleBI folder.
    Regards,
    Moumita

  • 6i to 10g Font Problems

    We have a lot of reports running in 6i with
    The title having 3 lines in it.
    The first line's font is courier new 8 italic
    The second line's font is courier new 11 Bold
    The third line's font is courier new 10 Bold
    In 6i the first line does not print italic. No body noticed, have been using it for a couple or years. the reports run off an aix box being called from forms
    We moved some reports from 6i to 10g.
    same server has a 10g setup, we run the reports now
    They are not printing bold and the first line is not printing italics (which is ok as this did not work in 6i)..but not printing bold is an issue...
    When i try to run the same report from my pc from 10g builder everything is just fine...the first line print italic and the next two print proper size and bold..
    are there any changes we have to make in the server conf files to make this work..
    - thanks
    n

    bump

  • OEM 10g Font problem

    I'm using Oracle10g on Redhat AS 3and OEM 10g.
    When I connect OEM 10g using explore6.0, I can not read font on buttons. The font on butons looks like rectangule. Please Help!!

    Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
    This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

  • Change the default font in OBIEE 10g

    Hi all,
    I need to change a few things in the default design of my OBIEE 10g, namely:
    Font and Font Size from all views (Tables, Pivot Tables, graphs…)
    Alignment of text. Numbers should be aligned to the write and text to the left
    I tried to change the font and font size in the view.css file but that’s not working.
    Can anyone tell me where/how I can change this?
    Thanks in advance

    Do change in common.css file
    ~ http://cool-bi.com

  • Problem in navigating from one report to another in OBIEE 10g

    Hi,
    I am facing an issue with OBIEE 10g while applying navigation on my reports.
    Lets suppose I made a report showing list of all items(in broad categories) sold on a particular day, say Dairy, Frozen Foods, Chocolates etc.In this report there is a date prompt showing the date of sale.
    Now there are certain items that are distributed within these categories, like dairy includes milk, cheese, butter etc.
    Hence, my navigation should be like when I click on a particular item category, the control should move on to the report which has all items under that particular category and the prompt for this report should show the same date as passed in the previous report.
    But sometimes what happens is that on clicking the navigation from first report to the second one, the date is not persisting in the prompt. I say sometimes because at times the navigation does work correctly. This is a bug of Obiee or something which is giving unexpected results.
    Kindly help with your suggestions.
    Thanks
    Ankita

    Ankita,
    This is not a bug in OBIEE...I'm sure something is missing. If this is working for some cases and not working for some other case then you will need to find the root cause. Try in bits and pieces...Step by Step with some dates (unit testing). Ideally this shud work properly.
    For an instance try with OBIEE drilldown feature and not with navigation with a single sale date and observe the behavior.
    Hope its clear...

  • Customize Font in Pivot Table OBIEE 10g

    Hi All,
    I have the Pivot table like this:
    Item                Value
    A                     1
    B                     2
    C                     3
    Total  A-C         6
    D                     1
    E                     2
    F                     3
    Total D-F          6
    How to bold the Total A-C and its value?My version is OBIEE 10g
    Thank you before
    Regards
    JOE

    Hi Joe
    In 10g
    1st change the View from Compound Layout to "Tabular View"
    2nd.. as you told the A-C total is needed, in the tabular view at Answers......navigate to that field/column  & find Sigma (Summation Symbol) ..
    3rd, by clicking on it..you will get the Totals in Bold Letters
    Please mark Correct if this helps you
    Regards

  • Problem while installing Usage Tracking in OBIEE 10g

    Hi all,
    I am installing usage tracking in OBIEE for that created a database called usertracking using the sample tables provided in OBIEE 10g. everything is fine, but while configuring the NQSConfig.INI (like, PHYSICAL_TABLE_NAME   = "usertracking"."dbo"."S_NQ_ACCT" ; where usertracking is the database ) file I am getting the error called : Error 1067 : The process terminated unexpectedly.
    Please help me by your precious suggestions.
    Thanking you,
    Jagadeesha
    Edited by: Jagadeesh on Apr 15, 2012 9:55 PM

    Hi,
    Just keep it only below
    PHYSICAL_TABLE_NAME = "usertracking"."dbo"."S_NQ_ACCT" ;
    for example oracle default usage tracking setting in NQSconfig.ini file
    PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
    CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
    For more info refer :
    http://obiee101.blogspot.com/2008/08/obiee-setting-up-usage-tracking.html
    http://www.obieetalk.com/obiee11g-setting-usage-tracking
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/biee/r1013/usage_tracking/usage_tracking.htm
    http://oraclebizint.wordpress.com/2007/08/14/usage-tracking-in-obi-ee/
    Thanks
    Deva

  • OBIEE 10G SSO Issue

    HI
    We have configured OBIEE 10g on IIS (ver-6) server. We have a business requirement where we need to integrate OBIEE with another ASP.NET application. So, user should log in once and to view OBIEE reports he should not log in again.
    Now we have checked GO URL option given in Chapter 11 of Oracle® Business Intelligence Presentation Services Administration Guide. But problem is our company policy does not allow us to pass Password in HTTP URL. So we cannot use that solution.
    We are trying to use SSO and referred to Chapter 8 of Deployment Guide. We followed all the steps give in that chapter
    Also, we modified isapiconfig.xml and entered &lt;CredentialStore&gt; paramaters in it.
    But when we Go to Analytics URL (for remote machine) Login screen show "Not Logged In" message.
    currently we are using REMOTE_USER method as it is given in documention.
    So we did everything by the book. Now my question is:
    1) We do not have any SSO server/Product, is there is any way we can integrate OBIEE application to other ASP.Net application on another IIS SERVER? There was a suggestion that if we pass remoter_user parameter in HTTP header, is it possible to work this way.
    2) Is it possible that if we host both the ASP.NET and OBIEE 10g on SAME IIS server there is way to integrate them using SSO without any SSO server again by passing remote_user HTTP header
    3) What options do we have to integrate ASP.NET application and OBIEE without using SSO server itself and without using GO url method as we cannot pass password in header. Will Cookie Enabling Method can work in this scenerio.
    4) Is there is way that OBIEE directly take windows ID without SSO server, I know question might sound stupid as in prerequisite i read that we need “SSO system of Choice” but we need to be absolutely sure about our option and possibilities.
    we also reffered to following thread:
    10g - how to configure sso with iis-
    But, this one seems to be unresolved So kindly help
    Regards
    Saurabh

    Hi Praveen,
    Thanks for your response. I was doing a bit of R&D on SOAP API, tell me if i am wrong.
    In case we use SOAP API to Authenticate then we will get Response in terms of XML and we have to write our own code to render it in tables or charts.
    We dont want that we just want to automate the Authentication part and want to use OBIEE use Interactive Dashboards. Kindly suggest if I am wrong and if we just write a piece of Code to get the Authentication done and it will not affect the further use of OBIEE.
    Regards
    Saurabh

  • OBIEE 10g Getting wrong results when adding calculated columns to a report

    Hi,
    I'm experiencing a possible misbehaviour with OBIEE 10g (10.1.3.4.1).
    I have a simple report with a table. Columns are simply selected from dimensions and facts. In this case the generated query is:
    WITH
    SAWITH0 AS (select sum(T30604.TOTAL_TIME) as c1,
    sum(T30604.MATERIALS_QTT_COST) as c2,
    sum(T30604.AMNT) as c3,
    sum(T30604.QNTY) as c4,
    T30622.BRANCH_CODE as c5,
    T25064.SRP1_CODE as c6,
    T25064.SRP1_DESC as c7,
    T25064.SRP2_CODE as c8
    from
    THK_BRANCHES T30622,
    THK_ITEMS T25064,
    THK_INVENTORY_TRANSACTIONS T30604
    where ( T25064.ITEM_ID = T30604.ITEM_ID and T30604.BRANCH_ID = T30622.BRANCH_ID )
    group by T25064.SRP1_CODE, T25064.SRP1_DESC, T25064.SRP2_CODE, T30622.BRANCH_CODE)
    select distinct SAWITH0.c5 as c1,
    SAWITH0.c6 as c2,
    SAWITH0.c7 as c3,
    SAWITH0.c8 as c4,
    SAWITH0.c4 as c5,
    SAWITH0.c3 as c6,
    SAWITH0.c2 as c7,
    SAWITH0.c1 as c8,
    SAWITH0.c4 as c9,
    SAWITH0.c3 as c10,
    SAWITH0.c2 as c11,
    SAWITH0.c1 as c12,
    SAWITH0.c4 as c13,
    SAWITH0.c3 as c14,
    SAWITH0.c2 as c15,
    SAWITH0.c1 as c16,
    SAWITH0.c4 as c17,
    SAWITH0.c3 as c18,
    SAWITH0.c2 as c19,
    SAWITH0.c1 as c20
    from
    SAWITH0
    Results of this report / query are correct.
    I then add a simple calculation (subtraction between two fields). The generated query is:
    WITH
    SAWITH0 AS (select sum(T30604.MATERIALS_QTT_COST) as c1,
    sum(T30604.AMNT) as c2,
    T30622.BRANCH_CODE as c3,
    T25064.SRP1_CODE as c6,
    T25064.SRP1_DESC as c7,
    sum(T30604.TOTAL_TIME) as c8,
    sum(T30604.QNTY) as c11,
    T25064.SRP2_CODE as c12
    from
    THK_BRANCHES T30622,
    THK_ITEMS T25064,
    THK_INVENTORY_TRANSACTIONS T30604
    where ( T25064.ITEM_ID = T30604.ITEM_ID and T30604.BRANCH_ID = T30622.BRANCH_ID )
    group by T25064.SRP1_CODE, T25064.SRP1_DESC, T25064.SRP2_CODE, T30622.BRANCH_CODE),
    SAWITH1 AS (select D1.c1 as c1,
    D1.c2 as c2,
    D1.c3 as c3,
    D1.c4 as c4,
    D1.c5 as c5,
    D1.c6 as c6,
    D1.c7 as c7,
    D1.c8 as c8,
    D1.c9 as c9,
    D1.c10 as c10,
    D1.c11 as c11,
    D1.c12 as c12
    from
    (select sum(SAWITH0.c1) over (partition by SAWITH0.c3) as c1,
    sum(SAWITH0.c2) over (partition by SAWITH0.c3) as c2,
    SAWITH0.c3 as c3,
    sum(SAWITH0.c1) over (partition by SAWITH0.c6, SAWITH0.c3) as c4,
    sum(SAWITH0.c2) over (partition by SAWITH0.c6, SAWITH0.c3) as c5,
    SAWITH0.c6 as c6,
    SAWITH0.c7 as c7,
    sum(SAWITH0.c8) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c8,
    sum(SAWITH0.c1) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c9,
    sum(SAWITH0.c2) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c10,
    sum(SAWITH0.c11) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c11,
    SAWITH0.c12 as c12,
    ROW_NUMBER() OVER (PARTITION BY SAWITH0.c3, SAWITH0.c12 ORDER BY SAWITH0.c3 ASC, SAWITH0.c12 ASC) as c13
    from
    SAWITH0
    ) D1
    where ( D1.c13 = 1 ) ),
    SAWITH2 AS (select sum(T30604.MATERIALS_QTT_COST) as c1,
    sum(T30604.AMNT) as c2
    from
    THK_INVENTORY_TRANSACTIONS T30604)
    select SAWITH1.c3 as c1,
    SAWITH1.c6 as c2,
    SAWITH1.c7 as c3,
    SAWITH1.c12 as c4,
    SAWITH1.c11 as c5,
    SAWITH1.c10 as c6,
    SAWITH1.c9 as c7,
    SAWITH1.c8 as c8,
    SAWITH1.c10 - SAWITH1.c9 as c9,
    SAWITH1.c11 as c10,
    SAWITH1.c10 as c11,
    SAWITH1.c9 as c12,
    SAWITH1.c8 as c13,
    SAWITH1.c11 as c15,
    SAWITH1.c10 as c16,
    SAWITH1.c9 as c17,
    SAWITH1.c8 as c18,
    SAWITH1.c11 as c20,
    SAWITH1.c10 as c21,
    SAWITH1.c9 as c22,
    SAWITH1.c8 as c23,
    SAWITH1.c5 as c26,
    SAWITH1.c4 as c27,
    SAWITH1.c2 as c28,
    SAWITH1.c1 as c29,
    SAWITH2.c2 as c30,
    SAWITH2.c1 as c31
    from
    SAWITH1,
    SAWITH2
    Results of this report / query are wrong: it seems as if some rows "disappear".
    If I delete the filter in SAWITH1 query above ( D1.c13 = 1 ) results are correct.
    Anyone experiencing the same problem? The strange thing is that I have a number of similar reports (on other subject areas) and everyting is working fine.
    Please also note that I don't want to add this kind of calculated items in the RPD (they can be simple calculations that are made on-the-fly).
    Any help would be greatly appreciated.
    Thanks a lot and regards,
    Cristina

    I have the same issue, everything OBIEE server generate query using ROW_NUMBER() over () function, it will hardcode Dx.cx = 1, this will cause issue if you have rows of the same distinct value, thus causing missing rows and the final results will be wrong.
    I have open a SR with Oracle Support since March 2011, but till today, they have not resolve the issue yet.
    Hope they solve the issue soon.
    Best Regards
    KT

  • D2k report query , want to develop in obiee 10g

    Hi,
    I have a d2k report query, the result what i am getting in d2k report can i get the same result in obiee 10g.
    my query in d2k report auery is like :
    select a.vndr#,b.vndr_name,a.cust_type_cd,c.cust_type_e_dsct,a.branch_cd,d.branch_e_name,(sum(nvl(a.sales_total_value,0))-sum(nvl(a.return_total_value,0))) net_sales_value,count(distinct(a.cust#)) cust_count
    from cust_net_sales_tmp a,vendor b,cust_type_codes c,branches d where
    a.vndr#=b.vndr# and
    a.branch_cd=b.branch_cd and
    a.cust_type_cd = c.cust_type_cd and
    a.cust_type_cd between :f_ctype and :t_ctype
    group by a.vndr#,b.vndr_name,a.cust_type_cd,c.cust_type_e_dscr,a.branch_cd,d.branch_e_name
    order by a.vndr#,a.cust_type_cd,a.branch_cd
    thank you.
    please suggest..

    Hi,
    The presentation variable is being passed correctly, but still the date value is not persisiting.
    I have two prompts, both having presentation variables passed into them;One of the prompt value is being persisted but the other one(here date) is not.
    I am not able to justify this issue as the problem is very vague. I dont see any reason for this issue to come up.
    Anyways I am still trying to figure out the problem.
    Regards
    Ankita

  • Localization in OBIEE 10g(Error "start row is set higher than the row count

    Hi All,
    I m Working on Localization.
    I have used exteranize string and saved excel file and added language column and inserted data en and fr and loaded the file into the database.
    then i have created 2 variables
    one is for weblanguage SELECT 'VALUEOF(NQ_SESSION.WEBLANGUAGE)' FROM DUAL
    second is SELECT SESSION_VARIABLE, TRANSLATION FROM TAB_EXTERNAL WHERE LANGUAGE = 'VALUEOF(NQ_SESSION.LOCALE)' when i click on Test for the second variable it showing error
    "start row is set higher than the row count"
    i have seleted start row =10 and show some 10.then also it is showing same error.
    Please send me the solution ASAP.
    Thanks and Regards
    Kiran Kumar

    Hi Kiran,
    I am working in OBIEE localization. I created two variables and when press test i am getting vaules successfully. But in OBIEE application i am getting columns in english only. It seems there is some problem with values in DUAL table. It contains only 1 column called 'DUMMY' and value as 'X'.
    Please give me complete configuration steps to setup localization OBIEE 10g. Please drop me a mail to [email protected] if u have steps. I will call u if u provide contact number.

  • Cascaded Prompts in OBIEE 10g

    Hello friends,
    Can some help me to understand how to implement cascaded prompts in OBIEE 10g? My situation is:
    I have three Prompts P1,P2 and P3
    P1: Values are comming from a table
    P2: Shows the value from a Stored Procedure, such that one stored procedure takes input parameter from P1
    P3: Shows the value from a stored procedure , such that one stored procedure takes input parameter from P2
    After selecting value from P3 , I will run the report. So here P2 is based on P1 , P3 is based on P2, ie cascaded.
    I have tried this by checking the box Constrain for P2 and P3 (red some where that if we make a prompt with checked the Constrain box then its value depends on the previous prompt)
    But for me this is not working even if check the Constrain box.
    Can I some one help me to do this.
    Thanks,
    Mithun

    Hi Krish,
    Value of P1 Im passing to a stored procedure (say SP1) to populate P2, same way values in the P2 (which is the result from SP1) I'm passing to SP2 which in turn gives the values in P3.
    I'm using the SP1 and SP2 in the Physical layer as
    EXEC SP_NAME @parameter1 = 'VALUEOF(NQ_SESSION.ID)'
    Here ID is the session variable I have created.
    And in the Dashboard, I have created the prompt P1 (on a field which is from a table), then the value is passed to the variable ID by choosing the 'Request Variable' option in the Set Variable drop down.
    Same way I did for other SP by passing the value from P2..
    Here for P2 and P3 I have checked the box for constrain so that value of P2 is depended on P1 and value of P3 is depended on P2.
    But my problem is this method of cascading is not working.. that is P2 value is not changing based on the value I'm selecting in P1 ans same way for P3...
    Hope my issue is clear to you..
    Thanks,
    Mithun

  • Write back  issue in obiee 10g

    Hi all,
    While updating data in DB using obiee 10g i am getting an error system is not able to read the template while updating.
    i have put the template in \OracleBI\web\msgdb\customMessages folder . Can anyone please suggest what might be the problem .
    below is the XML template i am using.
    <?xml version="1.0" encoding="utf-8" ?>
    <webMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <webMessageTable lang="en-us" system="writeBack" table="Messages">
    <webMessage name="WriteBack_Update">
    <XML>
    <writeBack connectionPool="WBC">
    <insert></insert>
    <update>UPDATE test SET COL3='@{c2}' WHERE COL1=@{c1}</update>
    </writeBack>
    </XML>
    </webMessage>
    </webMessageTable>
    </webMessageTables>
    Please help.

    Hi,
    Insert query is not mandatory.
    But you need to include a space between <insert> </insert>. So that s how it works. Check the xml with space in between the insert tag and it will work fine.
    This will resolve your problem. Please award if its helpful/useful to you.
    Regards
    MuRam

  • OBIEE 10g How ADD new report and use outer join

    Hi,
    I have to add a new report that use a new view...(just created in db)
    I'm new in OBIEE.. can you explain how can i do it?
    Actually:
    1. I opened administrator tool and import new view (and created an alias) in physical
    2. I built a logical table in BMM
    3. I built a new presentation table in presentation
    problem: the table in BMM have yellow icon like a fact table.. why??
    can you explain me what i have to do?
    thank you
    Edited by: 1006028 on 15-mag-2013 2.54

    By default OBIEE 10g considers a table as fact table that is dragged from physical to BMM layer. That's why you see the yellow color icon.
    If it is a dimension table, you will have to join this table with a fact table in BMM layer. After this the yellow color icon will go away.
    Pls mark correct/helpful.

Maybe you are looking for

  • Saving a PDF form with Adobe Professional

    I have Adobe professional with LiveCycle. I want to create a simple form that I sent to people. They fill it out and send it back. But the forms I create don't allow me to save changes when I open them in a Reader. This is so basic! I have no idea wh

  • WEBUTIL and Sun Java Plug-In

    Hello friends: how can I setup my formsweb.cfg to use Sun Java Plug-In (instead of JInitiator) and WEBUTIL? I tried all I can but still send me the same error when I try to use some of its functionalities: oracle.forms.webutil.fileTransfer.FileTransf

  • How can I turn this line and its intersection into a separate object?

    My initial object is #1, then I draw a line on #2. How can I turn the highlighted area into a separate object? (I cheated and filled this area with Photoshop, but I'd like to know how to turn this red area into a separate object so that I can fill it

  • Importing a Camtasia AVI clip

    I am doing some screen captures using Camtasia.  The captures look great as long as I play them in Camtasia or Windows Media Player or any other brand of media player.  When I import them into CS5 Premiere they lose quite a bit of quality and end up

  • ScreenGrabber RTP Transcoding

    I'm attempting to use VideoTransmit.java and the JMF ScreenGrabber example to transmit a live video feed of a desktop to a remote machine. Obviously, I've not been able to get it to work. I receive an error, such as: Unable to transcode format: RGB,