Obiee 11.1.1.5.0 cannot open .iqy file in Excel 2010
Hi,
when I try to open a .iqy file in Excel 2010 (windows 7) I get the Error:
Unable to open http://answers.activision.com/analytics/saw.dll?Download. The hyperlink cannot be followed to the destiantion.
In Excel 2007 (windows XP) I can open/refersh this query without any problems.
I think this is only a setting issue, but I don't have an idea what I have to change.
Maybe someone can help
Thanks and regards
Chris
Go to View Options where you will select Narrative View or Pivot Table under that you can see a Filters,Just click and export the results to excel it will work,Below the screen shot for your reference.
Recordings_2 - Download - 4shared
Mark if helps.
Thanks,
Similar Messages
-
Cannot Open .xls files in Excel 2010
Before we start, I would just like to say, I've read probably 9 or 10 other threads with no help.
I cannot open any .xls file. Unfortunately the user has already associated the file type with Adobe Reader, so I cannot just double click the files to open them. I have tried the follow fixes with no solution:
-Open With .. > EXCEL.exe (I double click the application and nothing happens)
-Going in to the file extensions page and associating it with the EXCEL.exe application there, but same thing, nothing happens
-I have tried going into the registry and renaming the "OFFICE12"'s to "OFFICE14". Nothing happened
-I have tried going into the Excel folder options and checking off and unchecking "Ignore Other Applications That Use DDE"
-I have searched for the "Microsoft Application Virtualization DDE Launcher" application with no luck
of finding it
-I have tried re-installing and repairing Office 2010
I'm out of idea and have no idea what to try next. Any ideas?Hi,
The registry key which could affect you open the .xls by double click is the following:
Important
This method is related to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you do it carefully. For added protection, back up the registry before you modify it. Then, you can restore
the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756) How to back up and restore the registry in Windows
HKEY_CLASSES_ROOT\Excel.Sheet.8
I would suggest you rename the registry key, and then repair the Office programs to create a new key.
For example:
Rename “Excel.sheet.8” to “Excel.sheet.8.old”.
Then repair the Office programs:
Start > Control Panel > Programs and Features > click the Office 2010 program that you want to repair, then click Change > Repair > Continue.
You might need to restart your computer after the repair is complete.
Sincerely
Rex Zhang
Rex Zhang
TechNet Community Support -
Cannot open project file in Project 2010
Hi,
I have a project created in Project 2010. I can save it without any problems. But some saves are broken and I cannot open them again. When I open saved project an error message is displayed:
There was a problem sending the command to the program and Project freezes. Project 2010 itself starts without any problems. What's strange I can open this file in viewers like MOOS Project Viewer 2.0 but not in Project.
Any tips highly
appreciated.
Lukasz ChominHi Lukasz,
Welcome to this Microsoft Project newsgroup :-)
It sound as though that project has corruption. If you can open it at all, follow the advice given below. If you can’t open it at all, it seems like it’s lost – you do have a backup don’t you?
If you can open it in another program, try copy/paste the data back into a new project.
If you suspect a corrupt file, you could try the suggestions in FAQ Item: 43. Handling project file corruption and/or bloat.
FAQs, companion products and other useful Project information can be seen at this web address:
http://project.mvps.org/faqs.htm
Hope this helps - please let us know how you get on :-)
Mike Glen
Project MVP
See http://tinyurl.com/2xbhc for my free Project Tutorials -
Cannot open .wav files from Outlook 2010 (beta)
This file the error message i get:
This file cannot be previewed because of an error with the following previewer:
windows media player rich preview handler.....Hi,
First, try to start Outlook in safe mode to see if it works fine.
If it works fine in safe mode, disable the add-ins you have in File > Options > Add-ins.
Second, try to clear out the Outlook Temporary items.
1. Locate the Outlook Temporary Items folder by opening the Registry and
locating
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\OutlookSecureTempFolder
2. Navigate to the value of this Key. It should be something like:
%USERPROFILE%\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\
3. Quit Outlook
4. Delete the contents of the folder
5. Launch Outlook
Hope it helps.
Had this same problem. End of key was like "CK2219B0\". Deleted this small portion, saved registry, and restarted Outlook. .wav files executing fine now! Musta been some kind of update glitch cause it worked up to a day or
so back and then I had this problem. Thanks!!! -
Hyperlink - Cannot open specified file in excel
I have created an excel document with hyperlinks to other documents on our drive. For some reason when I click on the links i get the above message. But the file pathway that is correct.
I have over 200 link and do not want to enter them in again manually.
PLease helpHi,
Which version of Excel are you using?
Have you changed the file path where the linked documents are saved?
If we manually modify a problematic link, will it work correctly then?
Please also check the following setting of your Excel. Click File > Options > Advanced, scroll to the General section, then, click the Web Options button. Make sure the check box before "Update links on save" is not checked under Files
tab.
In addition, we may consider to use VBA code to refresh/update your hyperlinks to see if it will make any difference. Since we are not the best resource for coding, you can post coding related question in the following forum:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Thanks for your understanding and support.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP
Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office. -
I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?
Try opening Disk Utility in your Applications-Utilities folder and repair permissions.
-
I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer
I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.
Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs. -
Photoshop Elements 9 and cannot open Raw files from my Canon EOS 1000D camera.
I am using Photoshop Elements 9 on a Windows 7 based PC and would like to know why I cannot open Raw files produced by my Canon EOS 1000D camera.
I have checked the version of the plug in as 6.5 for raw files which is supposed to open .cr2 files and should be compatible according to Adobe site info.
any ideas for next move.
MickHi,
According to all of Adobe's charts, the Canon 1000D should be supported by the basic PSE 9 even without updates. When you said you checked the camera raw version in PSE, did you do that by going to the Help menu and selecting About plugins -> Camera raw?
The Canon 1200D requires ACR 8.4 which is only compatible with PSE 12 - so for PSE 10 your brother would need the DNG converter.
I can't find a sample raw file to try (I do have PSE 9). If you want to upload a sample file to dropbox and give me access, I could try it on my system.
Have you tried opening one of your files on your brothers system?
Nrian -
I cannot open a file from lightroom into CC2014 unless I open it as a smart object. CC opens, just will not display my image. i am given an error code when I save an image, and can only save to my desktop or other locations, not automatically back into my lightroom.
I am using LR5 latest update, as well as CC2014
Below is the error message:
Line: 1 -> photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh HD:Users:BPexposures:Desktop:_DSC5962 as Smart Object-1.psd');I was also having this issue, and I did some more searching and found this answer in the Adobe forums: Re: Photos from Lightroom 5 to Photoshop CC (2014) and back.... The issue appears to be caused by having not updated Lightroom to the latest version prior to having CC2014 installed (wow that's stupid). The trick seems to be to uninstall Photoshop CC2014 and to then reinstall it after having upgraded to Lightroom 5.5.
-
I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?
What happens when you try to use the clone stamp tool?
It should work with the images side by side.
You can setup photoshop cc to be like photoshop cs2 was on your other mac, by going to Photoshop>Preferences>Interface and unchecking
Open Documents as Tabs and Enable Floating Document Window Docking
And also going to Window and unchecking Application Frame -
After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?
Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12. -
I cannot open InDesign files after upgrading to CS6.
Error message is "Cannot open the file *.indd. Adobe InDesign may not support the file format, a plug in that support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application" Can anyone help!
That message means exactly what it says, more or less. The three possibilities are it isn't an InDesign file at all (we see that here a lot), there is a .idlk lock file in the same folder (delete it), or the file has been damaged (frequently happens with flash drives).
If you open the file in a plain text editor like NotePad or TextEdit (it will look like gibberish) and paste the first few lines here we may be able to tell you if the file is damaged or not an InDesign file. -
Cannot open indd file in either CS5 or CS5.5
I downloaded CS5.5 on my laptop this afternoon. I then opened a CS5 file, worked on it, then saved. Now I cannot open the file in either CS5 or CS5.5. Is says InDEsign may not support the file format, the file is missing, or it is opened in anaother application. Does anyone know how I can open this file?
Just to be clear:
It won't open in either version. I created the file in CS5 (school computer lab), worked on it in CS5.5 (on my personal laptop connected through the server), then tried to open it on a school coputer using CS5. The file will not open.
Once you edit a CS5 file in CS5.5, it becomes a CS5.5 file and you will not be able to open it in CS5.
Make sure you are running the version you think you are, and don't double-click the file, but actually use File > Open from within InDesign CS5.5. -
I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.
Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.
Maybe you are looking for
-
Unable to preview rtf file in any format
Hi, I have created a rtf file and I also have the xml for the same.I loaded xml file with rtf successfully.but when I am trying to see the preview then I am getting error. below is error: ConfFile: C:\Users\sye59968\AppData\Local\Oracle\BIPublisher\T
-
There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.
-
What's with this "stay connected" pop up message?
Hi all, I just got a new G5 Intel iMac and have had great success transfering all of my setting and data from my old g4 iMac via the Migration Assistant and Target Disk Mode to the new machine. No problems at all. It was a breeze! However, now that t
-
We want to start an interactive news letter in pdf format, we want to have video, audio and flash animations in the news letter, can I do this with In Design ? I tried inserting video but on export the video did not show. Any Ideas I have the full cs
-
Error message came up when trying to activate Test Stand
The error msg below is displayed when I try to activate TestStand: An unexpected licensing error has occurred. Contact NI Tech Support to resolve.