Obiee 11.1.1.5.0 certifcation with LINUX-64 bit

Hi All,
Is
OBIEE 11.1.1.5.0 (Linux 64 bit) certfied on Database : Oracle 11.2.0.2 ( Linux 64 bit).
if Certified . Kindly let me know which software installtion need to be done like Simple, Enterpries or software only....
Weblogic is 1035
Java is : java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode)
Thanks

Hi,
Check the certification matrix here,
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
Rgds,
Dpka

Similar Messages

OBIEE version 10.1.3.4.1 with Informatica 64 bit

Hi Gurus,
Can someone please advice if we use Informatica 64 bit (8.1 & 8.6) with OBIEE 10.1.3.4.1.
As far as what i have seen on edelivery site 10.1.3.4.1 only come with 32 bit version for windows.
so will this combination work well? or cause any other issues?
Or do we have to use 10.1.2.0.2 64 bit version?
My Client would like to use 64 bit for faster performance however we need to ensure that the combination works and does not cause any issues at a later stage. Please note the "to-be" platform would be Windows 2008 & Database Sql server 2008.
Thanks.

Have a look here for the syntax and some examples:
http://gerardnico.com/wiki/dat/obiee/go_url

Is it possible to run OBIEE on linux 64 bit mchine with oracle 64 bit

Is it possible to run OBIEE 10.1.3.4.0 on linux 64 bit machine with oracle 64 bit(10.2.0.1.0) installed
Thanks in Advance

Yes, assuming your hardware has the supported CPUs. OBIEE binaries are 32 bits and requires 32 bits OCI libraries to connect Oracle DBs. See the OBIEE [System Requirements and Supported Platforms|http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf] for more information.

OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs

on Create Domain Step
I have been trying to install OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs on Create Domain Step.
Java is installed on root director. I have incease the Java Memory to 2084MB. Still hangs. I have also tried software only install and that also fails at Start Admin server step. I have also tried to configure thru Config.bat file and it does not recognize the weblogic server. Any help is appreciated.
Here are the log files.
[2012-05-06T16:38:13.288-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning value:false to variable:WLS_SINGLE_SERVER_INSTALL
[2012-05-06T16:38:13.350-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_HOSTNAME) to:suman-HP. Value obtained from:USER
[2012-05-06T16:38:13.397-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Using custom properties file oracle/as/install/bi/config/consumer.properties
[2012-05-06T16:38:13.709-04:00] [as] [TRACE:16] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] [SRC_CLASS: oracle.as.install.bi.biconfig.BIConfigMain] [SRC_METHOD: doExecute] ENTRY
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning Port: 7001 to: DOMAIN_PORT
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Domain port set to: 7001
[2012-05-06T16:38:17.929-04:00] [as] [WARNING] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Executing a Jaxb workflow ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@fafb2f1
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.startDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@29a5ec1f
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
Ora Install Logs
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space

Hi,
Refer this SR.
SR 3-5457356311: unable to create weblogic domain in windows 7 SP1 home edition 64 bit
Earlier i have face same issues.after 4 attempts its got resolved.make sure below points
static ip set it properly (windows/hots,etc files) make sure u r pc have full permission for installation user
1.Un-install WebLogic from your machine.
2.If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
3.Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
4.Run the installer as follows:
5.Open a command prompt
6.Change directory to \JDK_64\bin folder and execute:
like below,
C:\>cd C:\java\bin
C:\java\bin>java -D64 -Xms1024m -jar E:\Share_DEV\OBIEE11g_Latest\wls1035_generi
c.jar
run it now
Extracting 0%.....
Thanks
Deva

Problem installing OBIEE 11.1.1.6 on Linux 64-bit - redux

I had posted an issue earlier about not being able to install the Software Only on my Linux 64-bit. That problem has not been solved, but this is a new (possibly related) issue.
I created a brand new installation of Linux, with an Oracle 11gR2 database, and created the BI repositories using rcu for 11.1.1.6
I then navigated to bishiphome/Disk1/install/linux64 and ran runInstaller.
Everything looks fine, all the way up to Step 13 of 15, where the installer is supposed to start copying files. It "hangs up" at that point. The tests for adequate swap space and Temp space are passed:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 4578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 7999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-04-03_12-13-01PM. Please wait ...
It is running into an issue with a String Index out of bounds - Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Here is the full .out file:
Adding /tmp/OraInstall2013-04-03_12-13-01PM for deletion.
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/bi.jar
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/template.jar
null
configFileName:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/footprint.xml
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
Setting current page standalone validations to true
Setting current page standalone validations to true
Setting current page standalone validations to true
Inside startPreReqOperation...prereq
contextFile:/tmp/OraInstall2013-04-03_12-13-01PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: oracle-5.6
Check complete. The overall result of this check is: Passed
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-20.el5_8.3-x86_64.Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-54.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-54.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-107-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-107-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-107-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-54.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-54.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-54.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-54.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-54.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-12.0.1.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Checking for VERSION=2.6.18; found VERSION=2.6.32-300.39.5.el5uek. Passed
Checking for hardnofiles=4096; found hardnofiles=131072. Passed
Checking for softnofiles=4096; found softnofiles=131072. Passed
Check complete. The overall result of this check is: Passed
Check Name:GLIBC
Check Description:This is a prerequisite condition to check whether the recommended glibc version is available on the system
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-107
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 5992MB
Check complete. The overall result of this check is: Passed
Check Name:Check Env Variable
Check Description:Check for LD_ASSUME_KERNEL
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Setting current page standalone validations to true
Setting current page standalone validations to true
In processErrorMsgStringDomain Name
In processErrorMsgStringValid domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters, and include at least one alphanumeric character.
In processErrorMsgStringAdministrator Password
In processErrorMsgStringValid passwords are 8 to 30 characters long, must begin with an alphabetic character,use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringThe value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
resultset.getStatus() : true
Setting current page standalone validations to true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
In processErrorMsgStringDomain Home
In processErrorMsgStringOracle Instance
In processErrorMsgStringMiddleware Home
In processErrorMsgStringInstance Name
In [email protected]_invalidCharMsgString
Obtained the single page data..SpecifyHomeInformationPage
In processErrorMsgStringWebLogic Server Home
In processErrorMsgStringOracle Home
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyHomeInformationPage
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
resultset.getStatus() : true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
Setting current page standalone validations to true
OS: <LINUX> commad: </sbin/ifconfig -a> pattern: <inet(\s+.*:)?\s*\d+\.\d+\.\d+\.\d+>
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringBIPLATFORM schema user name
In processFieldStringBIPLATFORM schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : false
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting collector hub url in screen:null
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Setting current page standalone validations to true
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
Adding /tmp/OraInstall2013-04-03_12-13-01PM for deletion.
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/bi.jar
Adding to classpath:file:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/template.jar
null
configFileName:/tmp/OraInstall2013-04-03_12-13-01PM/ext/jlib/footprint.xml
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
location of staticportsini =/home/oracle/staticports.ini
Setting current page standalone validations to true
Setting current page standalone validations to true
Setting current page standalone validations to true
Inside startPreReqOperation...prereq
contextFile:/tmp/OraInstall2013-04-03_12-13-01PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of oracle-6,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: oracle-5.6
Check complete. The overall result of this check is: Passed
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-20.el5_8.3-x86_64.Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-54.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-54.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-107-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-107-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-107-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-107-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-54.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-54.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-54.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-54.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-54.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-12.0.1.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Checking for VERSION=2.6.18; found VERSION=2.6.32-300.39.5.el5uek. Passed
Checking for hardnofiles=4096; found hardnofiles=131072. Passed
Checking for softnofiles=4096; found softnofiles=131072. Passed
Check complete. The overall result of this check is: Passed
Check Name:GLIBC
Check Description:This is a prerequisite condition to check whether the recommended glibc version is available on the system
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-107
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 5992MB
Check complete. The overall result of this check is: Passed
Check Name:Check Env Variable
Check Description:Check for LD_ASSUME_KERNEL
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Setting current page standalone validations to true
Setting current page standalone validations to true
In processErrorMsgStringDomain Name
In processErrorMsgStringValid domain name may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters, and include at least one alphanumeric character.
In processErrorMsgStringAdministrator Password
In processErrorMsgStringValid passwords are 8 to 30 characters long, must begin with an alphabetic character,use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringThe value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
resultset.getStatus() : true
Setting current page standalone validations to true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
In processErrorMsgStringDomain Home
In processErrorMsgStringOracle Instance
In processErrorMsgStringMiddleware Home
In processErrorMsgStringInstance Name
In [email protected]_invalidCharMsgString
Obtained the single page data..SpecifyHomeInformationPage
In processErrorMsgStringWebLogic Server Home
In processErrorMsgStringOracle Home
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyHomeInformationPage
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
Entering getUnixVolumeFreeSpace false
In get free space method..
not required...
resultset.getStatus() : true
XXX: setting m_WLSHome to: /u00/wls/wlserver_10.3
Setting current page standalone validations to true
OS: <LINUX> commad: </sbin/ifconfig -a> pattern: <inet(\s+.*:)?\s*\d+\.\d+\.\d+\.\d+>
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringBIPLATFORM schema user name
In processFieldStringBIPLATFORM schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : false
Setting current page standalone validations to true
In processFieldStringMDS schema user name
In processFieldStringMDS schema user password
In processFieldStringConnect string
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting current page standalone validations to true
resultset.getStatus() : true
Setting collector hub url in screen:null
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Setting current page standalone validations to true
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
at java.lang.String.substring(String.java:1937)
at oracle.as.install.bi.util.InstallerInfo.getShiphomeLocation(InstallerInfo.java:58)
at oracle.as.install.bi.installaction.BIInstallAction.executeBeforeCopy(BIInstallAction.java:230)
at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteBeforeCopy(InstallActionProviderUtility.java:72)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.startInstallOperation(ModifiedDWizard.java:3117)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:788)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:886)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:934)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doFinish(ModifiedDWizard.java:611)
at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6288)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6053)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4651)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:602)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:616)
at java.awt.EventQueue$2.run(EventQueue.java:614)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
So far, I have confirmed I am using a 64-bit compliant java:
$> java -version:
java version "1.6.0_43"
Java(TM) SE Runtime Environment (build 1.6.0_43-b01)
Java HotSpot(TM) 64-Bit Server VM (build 20.14-b01, mixed mode)
There is nothing installed in this box except the Linux OS, one single Oracle DB for me to install OBIEE, no WebLogic, nothing else.
Any help will be appreciated!
Thanks,
Nick

Well, I redownloaded all five zip files for Linux 64 bit, and completely deleted my old bishiphome.
I then unzipped all five zip files into a brand new bishiphome, and retried the installation. This is still a Linux box with nothing on it but Linux, one Oracle 11gR2 database, rcu11.1.1.6, and attempting to install OBIEE 11.1.1.6.
Same result.
Still hangs at file copy, still has the same error message in the .out file.
Exception in thread "AWT-EventQueue-0" java.lang.StringIndexOutOfBoundsException: String index out of range: -2
at java.lang.String.substring(String.java:1937)
Any other ideas? This is getting really frustrating!

Starting OBIEE 11g on Linux 64 bit

Hi,
I installed OBIEE 11g on Linux 64 bit and it worked fine after installation. I rebooted the system and I need to start it again.
I am trying to run
run-sa.sh
run-saw.sh
etc.
but it looks like the scripts are broken:
./run-saw.sh: line 43: syntax error near unexpected token `('
./run-saw.sh: line 43: `ANA_INSTALL_DIR=$N($P(installLocation))'
it looks like these scripts were not processed by the installer during installation, $N($P(installLocation)) should have been replaced by the installer with actual paths I assume.
is there another way to start OBIEE?
Thanks,
Calin

Are you sure you are running OBIEE 11g? YOu are meant to use those scripts any more in 11g. See this post:
Startup Scripts for OBIEE 11g on Linux

Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.

Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

PROBLEM with 24/96 bit-rate USB DAC that worked fine until I plugged in two

I'm using a late 2008 15" Macbook Pro that I bought Jan 2009 right before the SD card models came out. Mac OSX 10.6.4 and iTunes 9.2 are installed. I have a Nuforce Icon HDP and a CEntrance DACport 24/96 bit-rate USB DAC (external sound cards) that still work great right now. Note - 16 bit/44 Khz is CD quality, and these 24/96 files are hi-resolution downloads that are closer to SACD or DVD audio.
I have been evaluating a new third 24/96 USB DAC plugged directly into the Macbook USB port (no hub) which has been working fine for over 2 weeks with 24/96 bit-rate lossless music files in iTunes. Audio Midi Setup is set for 24/96 to match the music file's resolution. After making suggestions to the manufacturer they made some improvements and sent me a new version to listen for the differences.
I listened to the new one for a day and it worked fine, but when I plugged in the original test sample into the second USB port at the same time as the new one in order to compare them, the sound became garbled and noisy. This never happened when either one was plugged in by itself. Note, if I make changes to the DAC's bit-rate in Audio Midi Setup I usually close iTunes first and then re-open it when I am done.
Upon hearing this new problem I unplugged both of the new USB DACs and plugged just one of them back in, but now it causes iTunes music playback to pause when one is plugged in and set for 24/96 in audio midi setup. Prior to plugging in both at the same time, either one worked just fine by itself. There is no reason when unplugging one or the other that they shouldn't start working again. But now I can't play any 24/96 music through either one anymore. In quicktime player the songs don't pause like with iTunes, but there is no sound coming through even with just one DAC plugged in at a time. Then I discovered that if I go into Audio Midi Setup application and lower the bit rate to 24/48 then iTunes will resume playing again and I can hear the music fine with iTunes or Quicktime player.
Basically, my Macbook Pro has now lost the ability to play 24/96 bit rate with either of these new USB DACs, when they both worked fine before I plugged them in at the same time. More confusing is that they use the same USB receiver chip as in one of the DACs that I mentioned above in the first paragraph, and both the HDP and DACport still work fine at 24/96 bit-rate. It's only these two new USB DAC that require me to lower the bit rate in Audio Midi Setup to 24/48 in order to listen through them, and this wasn't a problem as recently as yesterday!
The computer is acting like some setting needs to be wiped out - it's DEFINITELY NOT the USB DAC's that are faulty because they still both work fine at 24/96 on my wife's iMac (I'm afraid to try plugging in both at the same time to the iMac in case I screw that Mac up too).
I have reset the PRAM a few times, and this doesn't fix the problem. I thought maybe the com.apple.audiomidisetup.plist file could be corrupted and deleted it, but that didn't help. I don't know what to try next to get the Macbook to start fresh when trying to use these devices, short of having to re-install OSX.
Please, does anyone have a suggestion of how I can make the Macbook forget it ever saw these two USB DACs, and let me start fresh so they start working normally again? I do dozens of reviews for Head-fi.org and I can't afford to have my Macbook Pro compromised like this, which could prevent me from doing some reviews or evaluating new products.

UPDATE:
As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails

Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,

I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿?

Internet Security Suite does not work with Vista 64 bit

After attempting to use the Chat Help, twice, and spending hours in queue before getting kicked off, I finally called Support to find out why my new Vista computer was not running the Internet Security Suite that I downloaded. Yes, I found the link to "download to a second computer" and went thru all the steps. Got lots of positive feedback: little bars were filling in letting me know I was 40%, 72%, 100% done, etc.. Was given a window allowing me to Run or Don't Run the software. It all seemed to go very well. However, when the "download and installation" was complete, there was no new software running anywhere on my computer. Couldn't find it in the Control Panel, the Start menu, or the system tray. Called Support and spent at least 30 minutes on the phone with a "technician" (and I use that term VERY loosely) who had to have major assistance from a co-worker before he could even start screen-sharing with me and, during the course of our time together, made the following brilliant remarks:
Upon seeing my desktop wallpaper (which is a lovely photo of some cliffs and a lake - and it came with Vista), he wanted to know what the picture was. Not where it was taken, but just what it was. His exact comment was "Does your screen always look like that?". I had to dig deeper to determine if he was asking about a particular icon or some other computer related concern that he saw (he was "technical support", after all), but he was just asking about the stupid photo.
He couldn't find the Control Panel in the Start Menu until after trying several times, and then he couldn't navigate to the Programs area very well (I had to give verbal hints as to where it was), and his brilliant comment then was "I really need to go to my mom's house and get on her new laptop and try out Vista." Can you believe that Verizon has technical support folks who have never used Vista? It's not like Vista just came on the market yesterday!!
So, when he finally decided that he was not going to be able to help me, he didn't offer me any other recourse. He just stated over and over that he was not sure how to solve this issue. Oh, and this was after I re-downloaded ISS (again, "successfully"). I had to ask if there was someone else there who could possibly help me. He offered to put me on hold (for the 2nd or 3rd time at this point) to check around. When he returned to the phone, it was obvious that someone else was operating the mouse in the screen sharing mode because the operator moved confidentially around the screen and went immediately to system properties and saw that I am running Windows 64 bit. The other operator then told my guy to tell me that ISS only works with Windows 32 bit. Their final resolution was that I should call billing on Monday and end my subscription. I think that may be the only good advice I was given that day.
So, am probably going to renew my trial version of Norton on this new computer and remove ISS from the laptop and put Norton on there as well. Apparently, they are up to date with this fancy new technology. At least they probably know about sophisticated and highly technical stuff like desktop wallpaper.

I have been trying to get somewhere with this Internet Security Suite...and now have come to the conclusion this is not going to work. Now running Vista 64 bit, and have gotten nothing but the run around to try to complete the downloading of the program. I've contacted Verizon Tech Support...then tell me that this works with the 64 bit but I need to contact Windows as there is a glitch and they give you the steps to get thru it. Windows advises me to contact Verizon again as there are no problems with the OS. Also have contacted Radialpoint and once again nothing...Obviously the Secuirty is not compatible with Vista 64 bit yet, which I just can't believe like you said...it's not like it was just yesterday this OS came out. My frusteration comes from nobody steps up to take any responsibility as to what the problem is. If it is not compatible yet then say so and not waste my whole weekend trying to get a straight answer. I have other computers that I am currently using the service on and do like the program, but as for my Vista 64 bit looks like I may go to Macafee for protection. It just amazes me as big as Verizon is and as popular this Vista has become they are not on the ball in keeping up with technology.

Itunes 7.6 whats with Vista 64 bit???

Hallo. Apple whrite that 7.6 goes with Vist 64 bit, but my iphone doesn´t work
Can anybody help me?

Roy B wrote:
th3_r3n3g4d3:
Can you try something for me?
Download and install the QuickTime 7.4 standalone installer(without iTunes), install it, and report back your results? You can get it here: http://www.apple.com/quicktime/download/
Thanks,
Roy
Unfortunately, no.
It does not work correctly, I actually had to do a system restore. It broke a few things. Most noticeably my quick launch bar quit working. The icons were present but clicking them did nothing, it would not re-size correctly, etc.
I wont be putting it back on the PC any time soon.

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Microsoft Office Starter is a 32 bit program, why was it sold with my 64 bit Window 7 PC?

I purchased my PC because it came with Microsoft Office 2010 (so said the advertisement). I installed the Microsoft Office Starter as I was prompted. There was no option to select my OS otherwise I would've selected Windows 7 64 bit. I noticed the program
was installed as 32 bit and Word will not print my files. Why would you develop a 32 bit program to be sold on a 64 bit Operating System? Is there a 64 bit version I can download that I'm unaware of?

Hello,
As mentioned in the TechNet article, the 32-bit version of Office 2010 provides the same functionality and is also compatible with 32-bit add-ins. Therefore, the 32-bit version
of Office 2010 is installed by default.
64bit Office has better performance when running a single Excel larger than 2GB and also better performance when using Project files.
For normal use, 32bit Office did provide good performance
and more compatibility with existing
32-bit add-ins.
So, don’t worry about the 32bit or 64bit, go and enjoy Office 2010 new features!
Daisy Cao
TechNet Community Support

High temperature after suspend to RAM with linux-3.9.2-1.

After the update to linux-3.9.2-1 my laptop works on higher temperature after resuming from suspend to RAM. Works fine with linux 3.8.7-1.
Normal working temperature is 47~49 degrees Celsius and after resuming it is 59~61. It's not just a false temperature reading. I can actually feel the laptop warmer, and the CPU fun spins up.
I can't see any CPU high load. I tend to believe that the temperature rise has to do with the Intel GPU driver (i915). My CPU has an integrated GPU.
Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz
VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
cmdline:
i915.semaphores=1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 aspm_force=true acpi_backlight=vendor intel_pstate=disable
Anyone noticed something similar?
Ways to debug it? Apart from kernel GIT bisect.

I got the impression myself, that all the i915 downclock tweaks have been getting counterproductive over time as the driver got better.
Be sure to give the new pstate another go. I had problems too with the upgrade to 3.9.x and the powersave governor. Enabling "performance" in cpupower only and letting intel_pstate manage the idling on its own had an awesome effect. I only have rc6=1 and "sna" accel along with it on a similar cpu. Resuming with fan off.

Question about Portege 2000 boot with Linux

Hi everyone,
My Portege 2000 PIII 750MHz, 512 RAM, 20GB is simply driving me mad. I would like to try to install Linux, and have downloaded some distros to try it. The point is I am using an external CD/DVD reader, with a 16 bit pc card connector cable. Booting starts until the BIOS is involved, but when it gets to OS drivers being involved, booting hangs up, with every distro, except of course win XP, with which it installs perfectly fine.
Anybody got any suggestions on how to proceed? I really would like something lighter than WXP on my machine. Thx!

Hi
I do not have this Portege but I know that Toshiba recovery image (WXP) contains driver for external ODD and the installation can be done without any problem.
Maybe you can find some useful tips under http://newsletter.toshiba-tro.de/main/index.html

Obiee 11.1.1.5.0 certifcation with LINUX-64 bit

Similar Messages

Maybe you are looking for