OBIEE 11.1.1.6 different layer hierarchies

Hi experts,
I want to know whether the following layout is implemented. How to create different layer hierarchy in BMM in OBIEE 11.1.1.6?
If it does work , I want to drag this hierarchy into presentation. Please help me as soon as possible. Thanks.
For example:
Presentation Hierarchy
Total
---Region
-----District
---------Brand
-------------Product Type
-----------------Product Detail

Hi SPowell42,
I am using OBIEE 11.1.1.6 to design and develop anything.
I have searched some related help information in RPD, and found 'modeling dimensions with multiple hierarchies in the presentation layer ' title which introduced some simple hierarchy information,such as
Country
--Region
-----City
-------Supplies
-------------Product
-------------------Product detail.
I am not sure whether it can do different layer hieiarchy in hieiarchy persenation. Maybe the sample column data stored in one table, however, it is my assumption.

Similar Messages

  • Is it possibole to implement mutiple layer hierarchies in Essbase?

    Hi experts,
    I want to know whether the following layout is implemented. How to create different layer hierarchies in ESSBASE?
    If it does work , I want to drag this hierarchy into presentation. Please help me as soon as possible. Thanks.
    For example:
    Presentation Hierarchy
    Total
    ---Region(Region Table)
    -----District(Region Table)
    ---------Brand(Product Table)
    -------------Product Type(Product Table)
    -----------------Product Detail(Product Table)

    Well, I have to say that I do not really not OBIE so I can not make a good comparaison.
    What I could say is that in Essbase we use to have multiple dimension that we cross all the time
    Therefore in your exemple I would have 2 dimension, one called Entity :
    Total
    ----Location
    --------Region1
    ------------District1
    ------------District2
    --------Region2
    ------------District3
    ------------District4
    An other called Product:
    -Product
    -----Brand
    ---------Product Type
    -------------Product 1
    Then you "cross" the two dimension like:
    Product Type
    Product1 | Product 2 | Prodcut 3 ...
    Distric1 100 200 300
    Distric2 110 220 250
    There is on exemple here of hierarchy done in Outline Editor in Essbase:
    http://2.bp.blogspot.com/__2AaArK5lW8/TUWdz2-HQbI/AAAAAAAACzc/pp7vUsTRhmQ/s1600/1.png
    One exemple of the result in essbase:
    http://3.bp.blogspot.com/-9yQ4tsNOd-s/TWhGeHjK53I/AAAAAAAAAXw/B4lU72dEUPg/s1600/AddinMode.jpg
    Hope it will help you
    PS: Could you mark my answer as helpfull :)

  • How come, that the shadow of an object on one layer effects the view of an image, that is on a different layer

    one layer has a shadow - on a second layer I have my image - how come, that  the image-view is effected by the shadow of an object of a different layer? is this only a view-effect or does this effects the prints as well? if so, how can I change it?
    thanks for advice!
    angelika

    Basic rule is that transparent object affects other objects behind it. So if you bring some object to front of transparent object (or upper layer), transparency flatteners doesn´t flatten it during transparency flattening. There are some exceptions to that rule, but I almost categorize those as bugs...
    Use Window>Output>Flattener Preview panel to see which objects are affected...
    If you export PDF, it makes a difference if you use PDF1.3 as compatibility. Using that PDF-version triggers Transparency Flattener and resulting PDF has no live transparency. All the other compatibility options preserve live transparencies....
    http://www.adobe.com/products/creativesuite/pdfs/dgt.pdf is quite good white paper about transparencies in CS softwares, it´s a bit old but most of the things have not changed since CS2...

  • IS it possible to print image name/Path in a different layer in my existing indesign file??

    I want to print my image name and its path in a different layer in my indesign file.. Is it possible through script? Can any one help me how can I do this..

    Hi Tom,
    I'm pretty sure the IPTC data gets completely consumed inside an Adobe
    PDF file, even if the original images have this metadata or extended
    data (XMP) information. In other words, they do not make it through.
    Try downloading a copy of Enfocus Pitstop - I know you can link to an
    original authoring document (InDesign/Quark) through the CertifiedPDF
    route but you cannot display the image name?
    This is an interesting topic.
    Jon

  • RE: moving a layer mask to a different layer.

    Is there a way to move a layer mask from one adjustment layer to another adjustment layer (within the same file), without removing the mask from its original layer?  (I can move a mask to a different layer by clicking and dragging the thumbnail, but the mask then disappears from its layer of origin).  I'm using Ps CS5 on Windows XP.

    Vinsolo,
    I tried the alt-drag and it works; thank you for the info.  Would this technique also work to move a layer mask to a layer in a different file?
    drraw33

  • Sublayers display different layer color from Layer

    Can anyone explain to me why sublayers take on different layer colors from the parent layer color?  This especially becomes problematic with large files that have lots of layers.  As I start grouping and organizing layers, the layer colors become jumbled and it becomes difficult to read.  I would expect when I drag a layer into another layer, the new child layer would take on the color of it's parent.  Any suggestions on how to maintain layer colors w/out having to open up the layer options each time and choose the parent color?
    Christian
    Example:

    This is "as designed" it has been this way for the last 10 centuries or so... Sorry, no way around it, even if it seems illogical. Perhaps there is some script out thgere that can mass-change such attributes....
    Mylenium

  • Is it Possible to move the Dropdown Menu to a different layer than the rest of the menu?

    For design reasons I want the dropdown part of my menu to appear as though it is coming out from underneath the banner of the menu. The best way I can figure to do that is to have the dropdown part of the menu (that occurs on rollover) be placed on a separate layer from the main banner menu. Is this possible? I have tried unlocking everything and moving that part to another layer and haven't been successful. Please help this gal out! Thank you!

    I'm still confused as to how I can do this exactly. I have used the tool tip widget to create my own drop down menus. However, I cannot put the trigger point into a different layer than the layer with the drop down menu. How can I make the actual word "accommodations" into the trigger point for this menu? I tried moving the trigger point from the widget over the Accommodations, but in order for the drop down to come out from under the banner, the trigger is under it as well. I've also tried ungrouping them, but I am not successful. Please give me further detail as to how this works!

  • Obiee Dashboard Filters in two different lines of Journals

    Hi,
    Could anyone please suggest to resolve the following issues in obiee 10g;
    My report contains fileds called " Date", "Credit Amount", Debit Amount", "Account Number", " Line Number"; Now, if we have a "Credit Amount" (Say R50) for the date 01-12-2011 which is same as the "Debit Amount" (same R50) but in another date say 10-12-2011. Since the debit and credit amount is the same i dont want to see these records in the report while displaying it on the dashboard. I am not sure how we can check the debit and credit amount (for the equality) with different dates which comes in different rows.
    Plz suggest.
    Thanks,
    BK.

    BK wrote:
    Yeah, I have some prompts as " From Date" , "To Date", "portfolio name", "account number" and like this some other prompts. I just need to to display the credit amount and debit amount for accounts but the same credit/debit amount( in different dates) must be cancelled out and should not show me. only unique credit and debit amount to be displayed.In order to acheive need two reports
    1) First report will have all the columns and create one custom column where Debit - Debit Amount (=0)
    2 ) Main report on the Date column in your report Add filter condition --->Advanced Filter based on another request use report 1 and make the filter condition Date is not equal to / in Date field in report 2
    So the report2 will not show dates(rows) ( where debit - credit amount is 0)
    PS : Query performance will degrade because of inner query
    Thanks,
    Saichand.v
    Edited by: Saichand Varanasi on Dec 21, 2011 7:35 PM

  • Transfer rotoscope path to different layer

    A novice rotoscoper, I got a little confused from having read and watched tutorials with several diffeent styles of rotoscoping.
    Some said to use a layer in between path and actual subject layer with the eyeball turned off.  Then lock the actual target layer so as not to move it around inadvertantly.
    I may have that confused a bit... if so, it not the tutorials doing but mine.
    Cutting to the chase; I have a solid light grey layer with the opacity turned down to 1. above a footage layer of my great grandson doing his first zombie walk.
    I spent a lot of time getting a mask to follow his little head in his trek across the floor.  Now I wanted to transfer the mask path points over to the target footage layer.  I clicked the footage layer with the pen tool to get a mask started, then with focus on the grey layer/Mask/mask path (all the points are lit up so selected) and copy... then to the footage layer Mask/Mask path - paste.  So far so good.
    But somehow I must have moved either the grey solid layer or the footage layer sometime during all the pulling and hauling.so the mask misses the head in a perfect offset all the way thru.  The attached screen shot illustrates it well.  The first one shows the mask on the grey layer, the second on the footage layer.
    I tried lining up the layers by setting the `position' parameters the same, also by just eyeballing the crosshair thing that shows the center of each layer.
    Trouble is I can't find a way to see the crosshair from the one layer as soon as I focus on the other to move it.  Ditto for the path itself.  Soon as focus changes the path does to.  I may be going the opposite way of what I should, but tried it both ways with both layers and am just not getting how to get it right.
    I know I can just do it over, and that isn't really a problem since I can clearly use the practice.  But I feel like there must be a a clearcut way to match up a layers position to a path.
    At this point I've thoroughly confused the heck out of myself and would like to hear someone lay out how to get two layers to match up

    Haa, the footage layer is turned on but the solid layer above was
    set to 1% opacity.. with the eyeball off. cranking that up 100 fixed
    it.  Now I can see the babies head, and the rest is masked out as
    expected.
    You'd
    think the opacity setting on the solid layer would not matter if the
    layer eyeball is off anyway, but apparently it does.  If I scroll the
    opacity up and down with the layer eyeball off,  the babies head
    appears at higher percentages and disappears below 10 or so.
    If you think about it, it makes sense.
    A track matte set to "alpha" applies the opacity value of each pixel in the layer directly above to current layer. So, if Opacity for that layer is 1 per cent, that affects the opacity value of all pixels. Leaving it at 100 per cent, means that fully opaque pixels are applied as fully opaque, and fully transparent pxiels as fully transparent.
    The visibily control (eyeball) for the layer above is turned off aumatically (if it's not already off) as soon as you set a track matte mode. So, the layer is "seen" for the operation regardless of the visibiliy status.
    The column is headed with `T'  and when you check it, it says `preserve transparency'.  I don't quite get what that is for.
    That's called "Preserve Underlying Transparency", and it's a very convenient option... but I am surprised by how many people enable it without knowing what it does. It's not the first time someone gets bitten by it
    And what it does is... this layer (the one with the switch turned on) only exists in areas that are not transparent, when taking into account the combination of all layers below. Example: if you have three circles placed in different places, and then create a large text layer and enable this switch, text will only exist in places that match the circles underneath.
    More info in Preserve underlying transparency during compositing, in After Effects Help on the web.
    Another aspect of this:  I wanted to rotoscope the whole body... so as to be able to insert it on differnet backgrounds.
    I
    could use some ideas on that too.  I started with just the head to get
    an idea of how its done... but I'm guessing it might be easiest done by
    taking several masks to enclose various chunks of the babies body.   Is
    that how its done?
    There are many valid approaches, and whatever works for you is fine. But you can be happy to learn that many experienced roto artists suggest doing exactly as you just described
    I really recommend Mark Christiansen's book After Effects CS4 Visual Effects and Compositing Studio Techniques. It has a lot of useful information on roto work with AE.

  • Best Practice - When to put things on a different layer?

    I'm designing a simple website that includes a FLVPlayer
    component, some ComoBox components that control the player, and
    some text. Is there a technical reason why the player, the
    comboboxes and the text should each be on different layers, or is
    it more a matter of housekeeping? Is there a rule of thumb that
    indicates when a new layer should be used for something?
    Thanks

    I use them for organization, most of the time. When tweening
    symbols on the stage there can only be one symbol on the layer or
    it will not work. There should be a layer specifically for
    actionscript as well.

  • OBIEE in Unix and accessing Metadata Layer via Windows

    Hi,
    I'm new in OBIEE. I have installed OBIEE in Unix Environment. But how to access the metadata layer (.rpd file) via Windows (Administration Module)?
    Please help me.
    Thanks
    Raj

    Install the Admin Tool in your PC and then go to the ODBC Data Sources in Administration Tools and change the AnalyticsWeb Web ODBC data source to point to your Unix OBIEE server.

  • Two different Organizaion Hierarchies ???

    Hi All
    I have organizations, on which an employee has disziplinary and funtional role. That menas: The employerr x is in Country aa reporting to his director, but functionally ist under country bb.
    Is there any possibility in HRMS to cover this type of organizations hierarchy. Or we must create two different hierarchies: One for functional and second for disziplinary.
    Thanks in advance for you help

    Two possibilities I see:
    1) ask in a Forum that is related to your question;
    2) As in a My Oracle Support Community that is related to your question.
    I really do not see how your question fits with the description: "Use this forum to report broken links or general feedback about Oracle documentation. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered."

  • Weird problem: different layer sizes

    This is not the first time I encountered this problem but here it goes again:
    I have copied one layer several times and applied different filters. I turned on fixed resolution and had temporarily grouped and ungrouped three of the layers. When I added a fourth one and tried to export, the last one appears slightly bigger and off centre... Any explanation for this.
    I solved the problem by importing the whole thing into FCE and exporting the movie there - just interested what causes this weirdness...

    See this thread:
    http://forums.adobe.com/message/3905911#3905911
    "There is an issue with Encore layer breaks so most probably this is what is causing the problem.In some cases Encore places an extra chapter on the timeline at the place where the layer break occurs.This causes subsequent chapters to be incremented by 1."
    The original poster in that thread fixed the problem (which may not be precisely your problem) by putting the manual layer break on one of his chapters.

  • OBIEE 11g - complex join in physical layer

    Hi, I need to create a complex join in the physical layer with join criteria like the following:
    fact.fiscal_year = dim.fiscal_year and fact.accounting_period <= dim.accounting_period
    Every time I try to do this, I get the nQSError: 37005 Transaction Update Failed message. Any ideas what is going on?
    Thanks,
    Scott

    Actually, I (finally) got it to work - wow logical joins are a big pain in the butt in 11g. First off, I had to edit the RPD offline, couldn't get it to work (at all) online.
    Next I had to delete the existing joins...there appears to be no way to change an existing FK join into a logical join.
    Next created the logical joins as stated in my original post - but had to fiddle with it for about 15 minutes to get it to work. You can NOT click the two columns on the dim side, two columns on the fact side, and then just edit the default formula (which defaults to have = sign between the expressions) - because it creates a FK join, and then you start getting errors. Instead, I had to build the expression from scratch.
    All in all, 11g has gotten much less flexible and easy to use in this regard.
    Scott

  • Apply adjustment layer to different layer?

    Warning: I know just enough to be dangerous. And barely enough to explain myself. I've just managed to create exactly the effect I want, but...
    I have a layer (HEADER) to which I applied adjustment layers (curves and levels) using "Use Previous Layer to Create Clipping Mask". So now, above my HEADER layer, I have the adjustment layers (with linked masks) with the little black right-angle arrow pointing down to my HEADER layer.
    Is it possible to copy these adjustment layers and apply them to a second layer (e.g. FOOTER)?

    Shoot, I knew someone would hone in on those names. This is an image originally created by a design agency. "Header" and "Footer" refer to "swooshes" across the top and bottom of the image. So ignore the meaning of the names...
    And I'm sure I'm overlooking something really simple... OK, I have the HEADER layer at the top of my layer stack. Above it are the Curves and Levels adjustment layers (actually there is a Brightness/Contrast adjustment layer also), with the little black arrows pointing down indicating that the adjustment layer is applied ONLY to the Header layer. (At least I think that's what those black arrows mean.) Cool.
    Then there are about five more layers of other stuff. The adjustment layers don't affect them. Cool.
    Then there is the Footer layer. There are several more layers below the Footer layer. I would like to take all three of those aforementioned adjustment layers and apply them to the Footer layer also. So I duplicate, for starters, the Curves layer. "Curves copy" appears above the original, with it's little black down-arrow. But when I drag it to be above the FOOTER layer, it loses its little black arrow and is now applied not only to the FOOTER layer but also to all layers below it. Not cool.
    Does that help? Thanks for taking me on...

Maybe you are looking for