OBIEE 11.1.1.7.0 unable to extract filegroup1.jar. The file is corrupt

Hi ,
OBIEE 11.1.1.7.0 Zip file unable to extract filegroup1.jar. The file is corrupt
CRC failed in bishiphome\Disk1\stage\Components\oracle.bi.biadfcomps\11.1.1.7.0\1\DataFiles\filegroup1.jar. The file is corrupt
Tried different zipping software's like Win zip,win RAR,7Zip,windows Extractor but no luck...
and i have downloaded the software through the oracle site and e-delivery sites.. still facing same issue..
Please help me on this,
Thx,

Just in case try from here
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
If helps mark as correct :)

Similar Messages

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

You are unable to log in to the File Vault user account "myaccount "...

I know there are various posts already out there on remedies for recovering your data stored on a FileVault account when you receive the following message at the login screen; *"You are unable to log in to the File Vault user account "myaccount " at this time"*, but this genuinely worked for me despite AppleCare providing absolutely no assistance whatsoever. In fact, if I had followed their advise I'd be inconsolable right now having wiped my MacBook Pro and contemplating the prospect of rewriting my two essays due in 3 days time!
I, in a moment of shear stupidity, decided to move the sparsebundle file in my one and only account to trash. Thinking nothing of my foolish actions I shut down for the evening without a care in the world. The next day I started up my computer as usual, and as usual I was prompted at the login screen for my password. I entered the correct password, but was alarmed to see the message above flash before my eyes. Without boring you all with what I did over the weekend waiting for AppleCare to open again on Monday morning. Anyway, this post is specifically for people who have put the sparsebundle of their FileVault-enabled account in the trash (NOT anything else!) without emptying it, of course! The other prerequisite is that you must REMEMBER YOUR FILEVAULT ACCOUNT PASSWORD!
1. Firstly, you must insert *Disc 1 of the Mac OS X Install* discs.
2. Restart your computer holding down the letter S (make sure you are holding this down BEFORE the start up noise sounds)
3. Select the appropriate language and continue to the next screen (DO NOT go past the next screen, the WELCOME screen)
4. At the grey bar at the top, under Utilities, select *Reset Password*
5. Select the Administrator/Root account and proceed to change the password of this account to test
6. Confirm the password by reentering it and click Save
7. Restart your computer and at the login screen you should now be able to select an account named Other
8. The username for this account is root and the password is test (the password you entered earlier)
9. Using Finder, locate the Terminal utility, which can be found in *Applications --> Utilities*
10. Enter the following, ignoring the bold of course (pay attention to lower cases AND spaces!): *defaults write com.apple.finder AppleShowAllFiles TRUE*
11. Hit Enter
12. On the next line, enter: *killall Finder*
13. Hit Enter again
14. Type: exit on the next line and close Terminal
15. This has enabled the hidden files on your computer to be visible
16. You then need to locate the sparsebundle file in the trash of your usual account folder (it could be 501, so search for that too) whilst logged in to the administrator account
17. Once you have found it, click *Go to Folder* under Go in the grey bar and type /Users/
18. Create a *new folder* at this location with a new username
19. Move the sparsebundle from its present location to the folder you have just created
20. Click Get Info on the new folder, and at the very bottom click *Apply to enclosed items*
21. In *System Preferences --> Accounts*, create a new user with EXACTLY the same name as the folder you created (eg. Folder name = burtreynolds, new user = burtreynolds)
22. A window should appear if you have done the above correctly stating *A folder in Users folder already has same name, would you like to use it?*
22. Click OK
23. Click *Show All* at the top of the Accounts window
24. Restart your system and log in to the new account you have created
25. The sparsebundle should now be visible
26. Double-click on the sparsebundle, it will prompt you to enter a password
27. Enter the password of your former account (if you have genuinely forgotten this password, I honestly can't help any further at this point)
28. If the password is correct, the sparsebundle will automatically mount and you will have access to all the files
29. NEVER EVER USE FILEVAULT AGAIN AND BACK UP ALL DATA YOU DON'T WANT TO LOSE!!!
The above worked for me, and to say I'm mildly annoyed with AppleCare is, well, putting it mildly really!

I know there are various posts already out there on remedies for recovering your data stored on a FileVault account when you receive the following message at the login screen; *"You are unable to log in to the File Vault user account "myaccount " at this time"*, but this genuinely worked for me despite AppleCare providing absolutely no assistance whatsoever. In fact, if I had followed their advise I'd be inconsolable right now having wiped my MacBook Pro and contemplating the prospect of rewriting my two essays due in 3 days time!
I, in a moment of shear stupidity, decided to move the sparsebundle file in my one and only account to trash. Thinking nothing of my foolish actions I shut down for the evening without a care in the world. The next day I started up my computer as usual, and as usual I was prompted at the login screen for my password. I entered the correct password, but was alarmed to see the message above flash before my eyes. Without boring you all with what I did over the weekend waiting for AppleCare to open again on Monday morning. Anyway, this post is specifically for people who have put the sparsebundle of their FileVault-enabled account in the trash (NOT anything else!) without emptying it, of course! The other prerequisite is that you must REMEMBER YOUR FILEVAULT ACCOUNT PASSWORD!
1. Firstly, you must insert *Disc 1 of the Mac OS X Install* discs.
2. Restart your computer holding down the letter S (make sure you are holding this down BEFORE the start up noise sounds)
3. Select the appropriate language and continue to the next screen (DO NOT go past the next screen, the WELCOME screen)
4. At the grey bar at the top, under Utilities, select *Reset Password*
5. Select the Administrator/Root account and proceed to change the password of this account to test
6. Confirm the password by reentering it and click Save
7. Restart your computer and at the login screen you should now be able to select an account named Other
8. The username for this account is root and the password is test (the password you entered earlier)
9. Using Finder, locate the Terminal utility, which can be found in *Applications --> Utilities*
10. Enter the following, ignoring the bold of course (pay attention to lower cases AND spaces!): *defaults write com.apple.finder AppleShowAllFiles TRUE*
11. Hit Enter
12. On the next line, enter: *killall Finder*
13. Hit Enter again
14. Type: exit on the next line and close Terminal
15. This has enabled the hidden files on your computer to be visible
16. You then need to locate the sparsebundle file in the trash of your usual account folder (it could be 501, so search for that too) whilst logged in to the administrator account
17. Once you have found it, click *Go to Folder* under Go in the grey bar and type /Users/
18. Create a *new folder* at this location with a new username
19. Move the sparsebundle from its present location to the folder you have just created
20. Click Get Info on the new folder, and at the very bottom click *Apply to enclosed items*
21. In *System Preferences --> Accounts*, create a new user with EXACTLY the same name as the folder you created (eg. Folder name = burtreynolds, new user = burtreynolds)
22. A window should appear if you have done the above correctly stating *A folder in Users folder already has same name, would you like to use it?*
22. Click OK
23. Click *Show All* at the top of the Accounts window
24. Restart your system and log in to the new account you have created
25. The sparsebundle should now be visible
26. Double-click on the sparsebundle, it will prompt you to enter a password
27. Enter the password of your former account (if you have genuinely forgotten this password, I honestly can't help any further at this point)
28. If the password is correct, the sparsebundle will automatically mount and you will have access to all the files
29. NEVER EVER USE FILEVAULT AGAIN AND BACK UP ALL DATA YOU DON'T WANT TO LOSE!!!
The above worked for me, and to say I'm mildly annoyed with AppleCare is, well, putting it mildly really!

Computer crashed. But i saved my PSD every like 30 seconds.. Now i open my file it says "Unable to complete request because the file is not compatible with this version of Photoshop"

So my friend posted a funny pic in her christmas outfit and I thought it would be fun to turn it into a fake Christmas Movie poster..
Anyways.. My computer crashed.. "It does that sometimes" I re-opened my PSD and it says "Unable to complete request because the file is not compatible with this version of Photoshop"
Anyway to recover ANY of the file?
Here is the file im having trouble with. You can download it here if you are interested in taking a look: http://portalpacific.net/movieposter.psd
Thanks for any help! Happy New years designers!

PortalPacific wrote:
…Here is the file im having trouble with. You can download it here if you are interested in taking a look: …http://portalpacific.net/movieposter.psd
I downloaded it and looked at it. Even Graphic Converter can't recover any pixels or meaningful data, just some general information:
In my experience, if GraphicConverter can't open it, nothing will.
Your file is toast Sorry.

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Unable to delete job logs - Error : file is corrupted or unreadable

Hi,
We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
The error is "The file or directory is corrupted or unreadable". Because of this, Data Protector backup always has errors.
I have run "RSBTCDEL2" but these logs were not removed.
Is there a way to remove these stubborn old job logs?
Thanks in advance

>
Sisab Nimda wrote:
> Hi,
>
> We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
>
> The error is "The file or directory is corrupted or unreadable". Because of this, Data Protector backup always has errors.
>
> I have run "RSBTCDEL2" but these logs were not removed.
>
> Is there a way to remove these stubborn old job logs?
>
> Thanks in advance
Hi Sisab,
Best is to determine whether you actually have the jobs from 2009 ( completed / Cancelled ones ) in your Solution manager system. If they donot exist in the job tables ( normally can be seen using transaction SM37 and a date range ), just go ahead and delete the joblogs from the OS level from 2009.
Regards
Amit

Xcelsius is unable to load this file problem because the file is corrupt

Hi me name is Luis Diego and im working in a dashboard.
The first time i update the file was ok. After that the file start to send me the next message:
"Crystal Xcelsius is unable to load this file. The file may be corrupt or have features cannot be supported by this version of Crystal Xcelsius."
I try to open the file in other computers and in that computers the file was open it. All the computers have the professional version 4.5 so do i.
I reinstall the Crystal Xcelsius in my computer because i thought that the problem was a wrong install in the first time. But after i reinstall the software the problem doesnt go away.
So i need the help of someone to fix this.
Thank you for any help that can bring me.
Regards
Luis Diego Sancho Morera

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728

CS4 unable to place image ERROR: The file is not readable

Hi All,
I have been experiencing big issues with Illustrator CS4 and placing images into a document.
Basically I will be working on say a packaging project and after about the 4th image being placed I will get the error message The file is not readable I select OK (the only option available)
RESULT: no file placed no where to go?
I then have to save the document, close Illustrator, re-open, open the document and then the image will usually place (not always first time though and sometimes I will have to reboot the whole system!) but then the 5th, 6th, 7th image after that I have to follow the same procedure!... The image files are fine, 300ppi, 20-30MB max, PSD, TIFF, JPG dose not matter all follow the same issue... but eventually after a lot of rebooting and loading the so called un-readable files will go into the document.
Also the image will place sometimes but the same error message will appear on attempting to embed the image!
All very annoying and massively time consuming!!!
To top it off since the above, random AI files when loading up will crash Illustrator out... again after a reboot the same file will open fine with no problems???
My system:
OS: Windows 7 Ultimate (64bit)
Processor: Intel Core i7 CPU 920 @ 2.67GHz (quad core)
RAM: 6GB
GRAPHICS: NVIDIA Quadro FX 570 (3GB) (Dual monitor)
DVD/CDR
PRIMARY: ATA 500MB
SECONDARY: ATA 1Tb
Im desperate to get this sorted... other wise its back to my old system... slow but reliable!!
Many Thanks!!

Well, I just encountered the same issue using Illustrator CS5...getting the "The File Is Not Readable" error message...first time that's happened in the 14 years of using the program. It seems the file size was too large for Illustrator (or one of my computers) to handle. So I opened the file using one of my other computers and deleted the unused layers to reduce the file size. Originally, there were 6 layers with 3 different versions of the artwork and what I ended up having to do is create 3 separate files rather than having it all in 1.
Hope this helps!

I open tools and then downloads. I am unable to open any of the files in the download screen

I open tools and then downloads. A screen pops up with files I have downloaded through Firefox. I right click on a file and the open option is not highlighted. When I click it the file will not open. This is a new problem as this feature has worked before.

If Open and Open Containing Folder in the right-click context menu in the Download Manager window are grayed then that means that the file is no longer in the original download location. <br />
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

Unable to extract FB 4.6 files

There seems to be something wrong with the Flashbuilder 4.6 installation for Windows. I've downloaded the installation many times , and tried installing it on Windows XP 32bit OS. It hangs every time on the same spot, when it is trying to extract the files for the installation. It says "A problem has occurred while extracting some files. It always stops after or on the "updateInventory.dll" extraction. The installation doesn't actually start, it's failing on the extraction of the files to install.
Install File: FlashBuilder_4_6_LS10.exe 806 MB (845,374,656 bytes)
Its not a space problem or a permissions problem.

Thought I would give 4.5 a try. Adobe's link for 4.5 doesn't work. It looks like it is working but only downloads 1.2 mb. What appears to be the first K of the file.
Then I thought I would try 4.7. That downloaded fine (huge 1G file). When I ran the exe and it started the extraction, I waited and waited while it unpacked and it made it all the way through the unpacking. So in the 4.7 file the extract problem has been fixed. I still can't install it because it has some other problem with the log in screen. But that is a topic for a different place.
sigh...2 days of jerking around, still nothing.
And now I find, since I haven't bought it yet, there is NO support access. Can't report either of these situations to anybody.

"Unable to open a virtual memory file" and "Unable to initialize Photoshop" errors

Hi
I installed Photoshop CS6 64-bit on Windows 7 SP1 64-bit.
When it starts, these two messages are displayed:
Unable to open a virtual memory file because the file is locked. You do not have permission or the file is being used by another program. ...
Unable to initialize Photoshop because the file is locked. You do not have permission or the file is being used by another program. ...
How come?
Thanks
Bye

In other words, I have installed Photoshop CS6 64-bit (using the default directory) on Windows 7 SP1 64-bit.
My computer has 4 GB of RAM and a virtual memory file of 6644 MB.
When it starts, the two above messages are displayed also with an account of Administrator type?
How come?
Thanks
Bye

Unable to read the file using UTL_FILE Dir

I need to read/write a file from/to the operating system through PLSQL Package. I used UTL_FILE package to do the same. In the application server the utl_file_dir(/usr/tmp in my system) is created as a softlink to database server.
oI want to run this package through the application server. However I am unable to read and write the file to the operating system.
I just wondering it is not reading/opening the file from the server. Please suggest me how to modify my code.

Hi,
How to check if it is end of file or not? I have the following function which is working fine in my win2003 server std 32bit and Oracle10g Database R2 Standard Edition one 32bit. HOwever, when I deploy to production server which is 64bit OS and database, it gives error at UTL_FILE.GET_LINE(fptr, tmp);
Any idea why it behaves like that?
     FUNCTION readFile (
          inHTML OUT CLOB,
          path IN VARCHAR2,
          htmlFile IN VARCHAR2
     ) RETURN BOOLEAN IS
     fptr utl_file.file_type;
     tmp VARCHAR2(5023);
     bufferlen BINARY_INTEGER;
     BEGIN
          fptr := UTL_FILE.FOPEN(path, htmlFile, 'r');
          DBMS_LOB.CREATETEMPORARY(inHTML, TRUE);
          DBMS_LOB.OPEN(inHTML, DBMS_LOB.LOB_READWRITE);
          LOOP
               UTL_FILE.GET_LINE(fptr, tmp);
               if tmp is not null then
                    tmp := tmp || CHR(10);
                    bufferlen := LENGTH(tmp);
                    DBMS_LOB.WRITEAPPEND(inHTML, bufferlen, tmp);
               end if;
          END LOOP;
          WHEN NO_DATA_FOUND THEN
          DBMS_LOB.CLOSE(inHTML);
               UTL_FILE.FCLOSE(fptr);
               RETURN TRUE;
          WHEN OTHERS THEN
               DBMS_LOB.CLOSE(inHTML);
               DBMS_LOB.FREETEMPORARY(inHTML);
               RETURN FALSE;
     END readFile;

Unable to install Mozilla 8.0.1 - Windows says "This file is corrupted."

Like the title says, my PC was unable to install Mozilla 8..0.1. Windows mentioned that the file is corrupted no matter how many times I download Mozilla.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files
You can find the latest Firefox release here:
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

OBIEE 11.1.1.7.0 unable to extract filegroup1.jar. The file is corrupt

Similar Messages

Maybe you are looking for