OBIEE 11g (11.1.1.5) installation issue on solaris 10
Hello all
I am trying to install OBIEE 11g (11.1.1.5) on solaris 10 and i am facing the following issue once i run the "./runInstaller"
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 53110 MB Passed
Checking swap space: must be greater than 500 MB. Actual 63528 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-02_11-38-43AM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
-bash-3.00$
Even if i run the command "./runInstaller -silent" am facing the following issue
-bash-3.00$ ./runInstaller -silent
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 52789 MB Passed
Checking swap space: must be greater than 500 MB. Actual 63521 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-02_12-22-37PM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
Please let me know how to fix this issue?
Thank you
hi
Still facing the same error after all the prerequisites are passed
Checking Temp space: must be greater than 1536 MB. Actual 17419 MB Passed
Checking swap space: must be greater than 500 MB. Actual 68344 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-05_12-38-33PM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
Please let me know if am missing something here?
Thanks
Similar Messages
-
OBIEE 11g (11.1.1.5.0) - Issue with starting Node Manager
Hi,
Have anyone faced an issue with starting Node Manager in OBIEE 11g (11.1.1.5.0)? OS is 64 bit Linux, WebLogic is 10.3.5. I used the software-install method and followed by running config.sh. Everything completed successfully. I updated the catalog and rpd location in the FMW control screen.
To get it activated I bounced services and when I try to start Node Manager it gives below error --
<Aug 30, 2011 2:02:42 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 30, 2011 2:02:42 PM> <SEVERE> <Fatal error in node manager server>
java.io.IOException: Unsupported cypher suite: TLS_RSA_EXPORT_WITH_RC4_40_MD5
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:82)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)
at weblogic.NodeManager.main(NodeManager.java:31)
Aug 30, 2011 2:02:42 PM weblogic.nodemanager.server.NMServer main
SEVERE: Fatal error in node manager server
java.io.IOException: Unsupported cypher suite: TLS_RSA_EXPORT_WITH_RC4_40_MD5
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:82)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)
at weblogic.NodeManager.main(NodeManager.java:31)
+ set +x
I see the same issue reported in ML OBIEE 11g - Node manager fails to start upon upgrade [ID 1329442.1] and WebLogic Server: Node Manager Startup is Failing with java.io.IOException: Unsupported cypher suite [ID 1329260.1] I tried to modify commEnv.sh. But it didnt help me.
Please let me know if anyone have faced similar issue and what exactly did you do to resolve it.
Cherrish Vaidiyan
Edited by: Cherrish on Aug 30, 2011 3:14 PMHi,
There are Two types of Cipher suites --- Certicom Cipher Suite and SunJSSE Equivalent Cipher Suite. And with Weblogic 10.3.5, you are using Sun JSSE Cipher Suite, and by default Node Manager uses the Certicom Cipher Suite.
In the nodemanager.properties, Add CipherSuite=SSL_RSA_EXPORT_WITH_RC4_40_MD5, save and restart Node Manager.
Reference Metalink Note: WebLogic Server 10.3.x: Getting "Unsupported Cipher" Exceptions When Starting Node Manager [ID 1307325.1]
Cherrish Vaidiyan -
Installation Issues on Solaris 10
Hi all,
I've tried several times to install Sun Java Platform Application Suite on Solaris 10, and each time after the installation finished, it shows the same issues. I'll attach the errant installation summary file and the critical part of the install log below.
If someone can point me in the right directiron or tell me where else to look for more details on what might be wrong. I'd appreciate it.
--Zhiyuan
==============================================================
Installation Summary Report
Install Summary
Java Enterprise System Application Platform Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Sun Java(TM) System High Availability Session Store 4.4 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.2 : Installed, Configured
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Service Registry 3.1 : Installed, Configure After Install
Sun Java(TM) System Portal Server 7.1 : Installed, Configuration Failed
Sun Java(TM) System Portal Server Secure Remote Access 7.1 : Installed, Configuration Failed
Sun Java(TM) System Web Proxy Server 4.0.4 : Installed, Configured
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /peg/var/opt/SUNWwbsvr7
Web Server installation Directory : /peg/opt
Web Server Administration Server Host : hzhsd050.statestr.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Application Server Enterprise Edition 8.2 :
Domains and Instance Configuration Directory : /peg/var/opt/SUNWappserver
Application Server Installation Directory : /peg/opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /peg/opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /peg/opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /peg/opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory : /peg/opt/SUNWappserver/appserver
Document Root : /peg/var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : hzhsd050.statestr.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : hzhsd050.statestr.com
Access Manager Console Port(for Existing console) : 8080
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .statestr.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : hzhsd050
Access Manager Directory Server Host : hzhsd050.statestr.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=statestr,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Service Registry 3.1 :
Service Registry Installation Directory : /peg/opt
Sun Java(TM) System Portal Server 7.1 :
PS Install Base Directory : /peg/opt
JDK Install Directory : /usr/jdk/entsys-j2se
Web Container Type : SUNONE8
Web Container Install Directory : /peg/opt/SUNWappserver/appserver
Web Container Domain Directory : domain1
Web Container Instance : server
Web Container Document Root Directory : /peg/var/opt/SUNWappserver/domains/domain1/docroot
Web Container Administrator : admin
Web Container Administration Protocol : https
Web Container Administration Host : hzhsd050.statestr.com
Web Container Administration Port : 4849
Directory Server Host : hzhsd050.statestr.com
Directory Server Port : 389
Directory Manager DN : cn=Directory Manager
Access Manager Install Base Directory : /peg/opt
Access Manager Service Deployment URI : /amserver
Access Manager Console Deployment URI : /amconsole
Organization DN : dc=statestr,dc=com
Access Manager Password Key : lyF6/3TrMapDb3ghHMsdO1+nxruRO4ZT
EntSysResources:PS_DEPLOY_NOW : y
Install Sample Portal(s)? : true
EntSysResources:SRA_SWITCH_CORE : true
Portal Access URL (protocol://host:port/portal/dt) : http://hzhsd050.statestr.com:8080/portal
Portal ID : portal1
Search ID : search1
Sun Java(TM) System Portal Server Secure Remote Access 7.1 :
SRA Install Base Directory : /peg/opt
Access Manager Service Deployment URI : /amserver
Organization DN : dc=com
Create a new web container instance? : y
Server Protocol : http
Server Domain : statestr.com
Gateway Protocol : https
Gateway Domain : statestr.com
Gateway Port : 443
Gateway Profile : default
Gateway Protocol : https
Gateway Host Name : hzhsd050
Gateway Domain : statestr.com
Gateway Port : 443
Gateway IP Address : 10.248.38.82
Gateway Profile : default
Netlet Proxy Host Name : hzhsd050
Netlet Proxy Domain : statestr.com
Netlet Proxy Port : 10555
Netlet Proxy IP Address : 10.248.38.82
Netlet Proxy Gateway Profile : default
Rewriter Proxy Host Name : hzhsd050
Rewriter Proxy Domain : statestr.com
Rewriter Proxy Port : 10443
Rewriter Proxy IP Address : 10.248.38.82
Rewriter Proxy Gateway Profile : default
Certificate Organization : SSTC
Certificate Division : Software
Certificate City : Hangzhou
Certificate State : Zhejiang
Certificate Country : CN
Sun Java(TM) System Web Proxy Server 4.0.4 :
Web Proxy Server installation Directory : /peg/opt/SUNWproxy
Web Proxy Server Administration Server User Name : admin
Web Proxy Server Administration Server Port : 8888
Web Proxy Server Server Instance Port : 8081
Web Proxy Server Server Instance - Start on reboot : Y
The configuration log is saved in : /var/sadm/install/logs/JavaES_Install_log.1652367220
===========================================================
*** Start configuring PortalServer... ***
|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=;_SourceMethodName=;_JavaESMessageID=;_JavaESResourceBundle=EntSysLoggingResources|Configuration Class name class com.sun.entsys.installer.portalserv.config.PortalServerConfigurator|#]
[#|2007-08-22T11:15:39+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
[#|2007-08-22T11:15:39+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=getSelectedPortalSRAComponents();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
[#|2007-08-22T11:15:39+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=getSelectedPortalSRAComponents();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigPS02;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=[PortalServer, PortalServerL10n, SRACore, PortalSRAL10n, PortalSRANetletL10n, SRAGateway, SRANetletProxy, SRARewriterProxy]|Selected Components List = '&5B;PortalServer, PortalServerL10n, SRACore, PortalSRAL10n, PortalSRANetletL10n, SRAGateway, SRANetletProxy, SRARewriterProxy&5D;'|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigPS03;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=[PortalServer]|Configuration for '&5B;PortalServer&5D;' is deferred...|#]
[#|2007-08-22T11:15:39+08:00|CONFIG|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=performConfiguration(compID, configParams);_JavaESMessageID=JavaES_Config0006;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=PortalServer|Configuration succeeded for PortalServer|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=ConfigLeaf;_SourceMethodName=install(WizardState);_JavaESMessageID=JavaES_Config0002;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=PortalServer|
*** End configuring PortalServer ***
Command /peg/opt/SUNWportal/bin/psconfig generated the follwing outputs:
|#]
[#|2007-08-22T11:18:10+08:00|CONFIG|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=;_JavaESResourceBundle=|
Successfully created PSConfig.properties file
Copying config templates from: /peg/opt/SUNWportal/template/config
Successfully created PortalDomainConfig.properties file
Validating the Input Config XML File|#]
[#|2007-08-22T11:18:10+08:00|WARNING|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=;_JavaESResourceBundle=|
Configuration Failed : For input string: "DIRECTORY_PORT"|#]
[#|2007-08-22T11:18:10+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=stopRequiredServers();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
[#|2007-08-22T11:18:25+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=JavaES_Config0010;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/peg/opt/SUNWappserver/appserver/bin/asadmin stop-domain domain1|
ldapsearch tool not found at /opt/SUNWdsee/dsee6/bin/ldapsearch
Exiting the install script|#]
[#|2007-08-22T11:11:26+08:00|SEVERE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=IdentityServConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS24;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=2|Access Manager Configuration Failed ...2|#]
[#|2007-08-22T11:11:27+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=IdentityServConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
[#|2007-08-22T11:11:31+08:00|CONFIG|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=generatePasswdFile(fileName, keys, passwds;_JavaESMessageID=JavaES_Config0016;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=asadPFile|Creating password file: asadPFile|#]
[#|2007-08-22T11:11:32+08:00|CONFIG|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=generatePasswdFile(fileName, keys, passwds;_JavaESMessageID=JavaES_Config0017;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/var/tmp/asadPFile45261tmp|Successfully Created password file: /var/tmp/asadPFile45261tmp|#]
[#|2007-08-22T11:11:47+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=JavaES_Config0010;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/peg/opt/SUNWappserver/appserver/bin/asadmin stop-domain --domaindir /peg/var/opt/SUNWappserver/domains domain1|
/////////////////////////////////////Hi Philippe,
Thanks for your reply.
I installed the whole suite including directory server in a non-defaut install directory. I am wondering if changing install directory will cause issues.
--Zhiyuan -
OBIEE 11g Installation Fails at configuration process
Hi All,
I tried installing OBIEE 11.1.1.5.0 in my machine.Below are the prerequsite which I followed and the laptop system configuration details.
Pre-Requisites Followed : 1) Creation of Static IP address,2) Created Schema's using RCU In Oracle 11g Database.
Laptop Details : OS-Windows 7,Ram 3 GB and space for Installation nearly 14 GB.
Installation Type: Simple Installation
Issue : There are 14 steps in the wizard.I have succeeded till step 12 which is called "Installation Process",But in Step 13 'Configuration progress' the wizard says Creating Domain status as 'In Progress' which stays in the same status even after 2 hours.So I am not able to complete installation Process as the wizard is not completing the Step 13 process which is 'BI Configuration'. This is the 4 attempt Iam trying the installation and the output is failure in the installation of OBIEE 11g on my machine.
Known Issue : Also when I executed the setup file for running the installation file in 'Drive:\bi_windows_x86_111150_32_disk1_1of2\bishiphome\Disk1\setup.exe',in the command prompt i got a warning message like swap space is 0.But I ignored that error and I gave 'y' to proceed further for the installation.As this swap space issue was common in many of our folk installation process which has ended in successful installation.
Help Needed : Can any one suggest me what will be the cause for the issue,or any Pre-requisite is missing,or the installation steps which I need to follow to make my installation successful.
Thanks in advance,
Regards
Kris- all installation files must be in a folder without spaces.
Try to decompress all files in c:obi11g for exemple and restart installation.
Or
- You may have a temp directory in the path C:Documents and Settingsuser_nameLocal SettingsTemp. You got the above mentioned exception because of the temp directory path having spaces in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:Documents and Settingsuser_nameLocal SettingsTemp path.
4. Edit the TEMP and TMP variables and mention C:TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
regards
srinivas -
Hi Experts,
We are using OBIEE 11g
We are facing the strange issue while accessing the presentation services login page.
I had uploaded the RPD file using EM,it is working for 1 hour with out any issue.
After some time the fallowing error is coming. then we are not able to access presentation services,
I had observed all the services are down in EM>Capasity manage ment tab.
Longing screen is coming ,but after entering the credentials ,it is showing login into…but not at all opening the window.
Error connecting to the Oracle BI Server: Could not connect to the Oracle BI Server because it is not running or is inaccessible. Please contact your system administrator.
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred.
[nQSError: 12010] Communication error connecting to remote end point: address = SERVERNAME.com; port = 9706.
[nQSError: 12008] Unable to connect to port 9706 on machine SERVER_NAME.com.Please have your System Administrator look at the log for more details on this error. (HY000)
Thanks in advance.Hi ,
I normally do this to fix this problem
1>Disable the network , keep the loopback adaptor enabled and then restart the services.
2> You can enable the network after services are restarted.
If you want a more practical solution and dont want to disable network again and again, then you would find the blog below useful.
http://www.rittmanmead.com/2012/08/obiee-fmw-and-networking-on-dhcp-hosts/
Hope this help.
Thanks,
Maqsood -
Hi,
I am trying to install OBIEE 11g and as per the installation document I need to have OBIEE Installer to start with installation. The document points to
Download Oracle Business Intelligence 11g Installer .zip file from OTN at the
following link:
http://www.oracle.com/technology/software/products/middleware/htdocs/111110_fmw.html
This takes to the page with listing to download Weblogic installer instead. Is it the same installer I need to use eve for obiee 11g or the link is wrong.
Appreciate if someone can point to correct location.
Also, RCU zip file donot have any setup or any such file. Which file I should launch to get RCU running?
Appreciate if some one can provider pointer to this.
Thanks,
RiteshHi,
Thanks a bunch. I just got carried away by document.
Thanks again for the pointer.
Ritesh -
Error while deploying new RPD in obiee 11g
Hi ,
Getting the below error , while activating changes , after deploying a new RPD through EM :
Message SEVERE: Element Type: JEE_SERVER, Element Id: 01HW447397:bi_server1, Operation Result: UNEXPECTED_ERROR, Detail Message: Exception occured during setting configuration values.
Supplemental Detail Underlying cause of exception was:
oracle.bi.management.exceptions.ConfigMBeanRTException
Failed to generate edit filename for: C:\WINDOWS\ODBC.INI; java.io.IOException: Access is denied
Report on underlying changes made is:
INFO: Element Type: JEE_SERVER, Element Id: 01HW447397:bi_server1, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINE: Element Type: ORACLE_INSTANCE, Element Id: 01hw447397:instance5, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINE: Element Type: BI_INSTANCE_DEPLOYMENT, Element Id: 01hw447397:instance5:coreapplication, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obis1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: RepositoryName set to value: PaintDesign_BI0008.rpd (was: DipTest_BI0005.rpd)
FINE: Element Type: BI_INSTANCE_DEPLOYMENT, Element Id: 01hw447397:instance5:coreapplication, Operation Result: APPLYING_ENDPOINT_CHANGES, Detail Message: null
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_sawbridge, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: sawservers set to value: 01hw447397:9710 (was: )
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obips1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: JavaHostProxyHost set to value: 01hw447397 (was: )
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obips1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: JavaHostProxyPort set to value: 9810 (was: )
FYI , I succesfully checked in the RPD , tried restarting all BI services and re-login into EM . But the error still exists .Thanks for your replies !!
In any of the RPD deployments I'm getting the same error , not for some particular RPD .
FYI , yesterday (before this issue) I had a issue with starting presentation services , so as adviced in forum I replaced the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working OBIEE 11g (11.1.5)instance.
plese refer : Re: Unable to start presentation services , in OBIEE 11g
Is this causing the deployment issue ? -
Removing drag functionality of column in OBIEE 11g
Hi all,
Can any one say me how to remove the draging functionality for the columns in OBIEE 11g ? It is creating an issue for me when i hide the columns in pivot and has only rows over there. It is creating one more layer on the top of the measures.
Thanks for your help.Fightclub,
Edit the Pivot view and goto Row section -> Row Properties -> Option - Uncheck the Display Heading.
But you'll loose your columns heading of rows.
Thanks,
Balaa... -
Prerequisite checking issue during obiee 11g installation in windows server 2012
HI..
Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
can someone provide help to solve this issue..
Thanks,HI..
Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
can someone provide help to solve this issue..
Thanks, -
Issue with OBIEE 11g(11.1.3) Installation
I have installed OBIEE 11g last evening. I was able to connect to the dashboard and run a simple report also – all before shut down. Now when I try to access OBIEE 11g thru port :9704 after starting the BI services, I am getting the following error.
“Error 404–Not Found
From RFC 2068 Hypertext Transfer Protocol — HTTP/1.1:
10.4.5 404 Not Found
My Weblogic server is working fine but im not able to access EM or ANALYTICS.
When I click Programs > OBI > Start BI Services it opens 3 wndows and says weblogic server is started and Im able to login to Weblogic server via “http://localhost:7001/console”.
When i start my machine the following services are started automatically:
1) Oracle WebLogic node Manager
2) OracleDBConsole
3) Oracle Service
4) OracleOraDB11g_home2_TNSListener
The following services are not started:
1) OracleDB11g_home2_ClrAgent
2) OracleJobScheduler
3) Oracle Process Manager(instance1)
4) Oracle VSS Writer Service
can you pls let me know how to start the Weblogic Admin Server?
I have even tried to reinstall and when the installation completes im able to login to “EM”, “weblogic” and “Analytics” also, but once i restart my machine im not able to login to “Analytics” as well as to “EM”.
The process im following is:
When i start the BI Services from Start->Programs->Oracle Business Intelligence->Start BI Services, i get a popup window where it asks for weglogic user and password, then i have entered the user as “weblogic” and has give the password entered at the time of installation, then 2 popups opens and it runs several java files, then im able to login to weblogic but no luck with “em” or “analytics”.
If i try to login to weblogic and try to start the “bi.em”, “biadminservices” i get java error message.
Even i dont get Oracle Logo on the Admin tool also.
Can you pls let me know the repository password also as i have tried with “Admin123? but no luck.
Every time when i do the installation im able to access all the services for the first time but once i restart the machine then only weblogic will be working.
I have installed OBIEE 11.1.3 on Windows 7 Ultimate N(32 bit) OS with Oracle11g Database
Pls let me know if im missing anything here?
Appreciate your helpThis is a really basic question... but how much memory do you have, and how long have you waited for all the processes to load? On a Windows XP Virtual Machine with 3GB, I have waited 20 minutes before being able to access. And until then, you will see the error you have received.
Just a thought... -
OBIEE 11g installation Issue - Demo Cert in production mode
Hello All, I installed OBIEE 11g along with Weblogic 10.3.5 on Linux 64 bit server. I searched entire <<MW_HOME>> folders and changed PRODUCTION_MODE to false in all possible .sh files. However, the error doesn't go away.
Is there any other location, I need to check for this flag?
Also, when I login to WebLogic console, Domains --> Configuration --> General .. I still see Production mode = true.
Thanks in advance for your help and assistance.
Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 12:12:27 PST 2002,
To: Tue Mar 22 13:12:27 PDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSignHi Vagic
Did you get any clue on this problem? I'm facing the same warning and I'm not sure if that's releant or not.
Thank you -
Error RCU-6083 during RCU installation prior to OBIEE 11g on Solaris
Hello,
I have an application server where I have an Oracle Database EE 11g running on Solaris 10 upgrade 9.
The server has the following characteristics:
- SUN V440
- RAM 16GB
- 2 processors Ultra Sparc III, 1.5GHz
- OS: Solaris version 10
- Disk space: 500GB
- Oracle Weblogic Server 11g (10.3)
- Ethernet 1 Gpbs
I want to install the RCU schemas and OBIEE 11g (11.1.1.5.0) on this server so I verified all the pre-requisites for RCU and OBIEE and are OK.
I am using the Repository Creation Utility (11.1.1.5.0) for Microsoft Windows (32-bit) to install the RCU because although the database is running on Solaris, the installer is not working through that server so I have a PC connected to the network and through that PC that has windows7 i could run the installer and connect to the db, using the SYSTEM user (because when i select sys as sysdba, although the password is correct, it doesn't connect to the db).
However, the installer is sending the ERROR: RCU-6083 regarding the pre-requisites for the BIPLATFORM.
I already use the following command alter system set processes=500 and restarted the db services, however the wizard installer is still sendig that error.
What can be done to succesfully install the RCU?
Thanks and regards,
RebecaHello User,
Below my comments in blue:-
1) Do I need to install any Oracle DB (like to install 10g) prior to running rcu.bat file?
Yes
2) If I install Oracle 10g DB, does if create any compatibility issue while installing OBIEE 11g?
Check below the compatibility matrix
Oracle Fusion Middleware Supported System Configurations
Thanks,
Sasi Nagireddy. -
OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step
Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
NitinHi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram -
Configuration issue related OBIEE 11G coreapplication_obips1
Hi All,
My issue is related to configuration of OBIEE 11g,
My installation is successful on windows server 2003, with Enterprise Install
but this coreapplication_obips1 is failing to configure anybody has any idea to resolve this,
Why this error is coming,
once I have uninstalled OBIEE 11g to resolve,
Thanks to all expertsHi,
Not sure about the behaviour in 11g, but we faced a similar issue in 10g while passing the presentation varaibles to detail report where main/detail report where coming from different subject areas. The behavior was a little unpredictable. To overcome this, we tried using request variable instead of presentation variable and it worked for us.
You can give it a try by doing the same and see if it works for you.
Thanks -
Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine
Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
ThanksHi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM
Maybe you are looking for
-
When i now had recieve a brand new 27" imac, i had a 3 year old model 27" imac which my daugter want to have BUT i should be as a clean Windows thing - so how to change the computer to a clean windows 8 computer with no apple programs in and no Maver
-
How to extract data for this tcode
Hello BW Experts, I have a transaction code in R/3. i observe that is a using a program P1 and structure S1 to generate the table display in the r/3 transaction. i go to se38 and display the code, it seems to be a module pool. Any suggestions for ext
-
Error encountered while trying to use EJB control in a Platform Domain
Hi, I've configured a Weblogic Platform domain and installed all the application EJB's thru a JAR file. When I try to access these EJB's from within Web Logic Workshop using the EJB Control, I am able to find the Home and the Remote interfaces and th
-
How to use JFrame's setLayeredPane() method?
I want to custom JFrame's LayeredPane by setLayeredPane() method,but it does't work. Anyone who can help me? The code as follows: import javax.swing.*; import java.awt.*; public class LayeredTest{ public static void main(String[] args){ S
-
Why does the Reader automatically switch screens in a two(2) display setup?
Reader keeps switching between my two display setup. I had this problem pop up about two months ago and finally installed version 11. The problem went away but about two weeks ago, Reader automatically switched back to displaying the pdfs on the seco