OBIEE 11G 11.1.1.6.0 installation error

Hi,
I am trying to install 11g and I am hitting this error. Windows 64 bit. I tried cleaning up the repository by dropping it and recreating and then installing, but still I am stuck at 47% and I am getting the following message "Installation Failed" "OUI Session Failed" "invalid entry CRC(expected 0x124fe1e4 but got 0x1ed43351). Please help with suggestions.
Thanks for your time and help.

invalid CRC error means like a bad file or bad extraction so try to
Download and install OBI 11G again, and also review the following additional steps.
1) Download the file again and ensure that the downloaded file size matches the file size expected.
If the file is not the expected size, you may want to try temporarily disabling anti-virus software or downloading on a UNIX machine first.
2) If you download on a UNIX machine, ensure that you FTP the file over to the Windows machine in BINARY mode.
3) Try extracting / unzipping the software using a different unzip utility from WinZip.
( for example: try 7-zip ).
4) When extracting, ensure that you have enough space to extract and also ensure that you have adequate temporary space. For the temporary space directory on Windows, review the environment variables TEMP and TMP.
5) Ensure that the Windows user has full Administration privileges.
if the same installer works in another machine then might be problem with your machine try to remove all the components and do a fresh install hope it might be helpful
thanks

Similar Messages

Oracle 11G database for 64 bit windows installation error

Hi,
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

Adipur wrote:
Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
Re: Oracle 11G database for 64 bit windows installation error
Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
Edited by: EdStevens on May 15, 2013 7:03 AM

OBIEE 11g: Admin= Manage Session= View Log throwing error

Hi,
When we are trying to see the logs from obiee 11g admin screen=>manage sessions, it is throwing the following error:
Log Could Not Be Retrieved
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <3791257602>: Syntax error [nQSError: 26012] . (HY000)
- But we are not getting any error while running report or dashboard or anything else.
What could be the possible reason for this? Where to check?
Thanks in advance

Sudipta Gupta wrote:
Hi,
When we are trying to see the logs from obiee 11g admin screen=>manage sessions, it is throwing the following error:
Log Could Not Be Retrieved
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <3791257602>: Syntax error [nQSError: 26012] . (HY000)
- But we are not getting any error while running report or dashboard or anything else.
What could be the possible reason for this? Where to check?
Thanks in advanceIf you restart the service the problem would resolve but every time its not a good idea to bounce the services the problem is with cache/queries stores in nqquery.log have a script to clear the cache files periodically
upgrade to 11.1.1.6.2 the problem is fixed
thanks,
Saichand

OBIEE 11g 11.1.1.6.0 installation on Windows 7 64 bit laptop issue

I have managed to install the suite but during the final stages: 13 of 14 configuration process I got an error with the restarting of the Admin Server. I aborted the installation. Now it took hours to get to this point so I was wondering if there is possibly a way of just restarting the installation at this configuration process stage or Must I uninstall everything and start from scratch?
On checking the Enterprise Manager Fusion Middleware Control I see that there are a number of things missing from the screen:
Everything is up and running, however the Weblogic domain doesn't show the WLS_ related objects. There is no webcenter object. etc. This is obviously due to the fact that the recommended configuration process didn't complete.
The weblogic server works fine, the Administration tool works fine. However, when I try to get the Analytics web page it gives me the following error:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Can somebody please advise me on what I can do to either fix the error or restart the configuration process stage, 13 of 14, of the installation?
Thanks
Dino
Edited by: user496315 on Sep 9, 2012 5:42 PM

HI,
10.5.1 500 Internal Server Error
The above error says Presentation services not running.
Using this command you can check:
Open --> Run--> Cd OBIEE_Home\Instance/Intstace / bin> opmnctl status
Try to stop services and again restart the all services.
stop the all services = opmnctl stop all
Start the services = opmnctl start all
I guess you installation not done completely.
Please refer the below link try to install freshly.
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
Hope this help's
Thanks,
Satya

OBIEE 11g BI Publisher; New Data Set Creation Error "Failed to load SQL"

Hi,
I'm trying to create a new SQL data set (from a client machine). I use "query builder" to build the data set. But when I click "OK", it fires the error "Failed to load SQL".
But strangely, if connect to the OBIEE server's desktop and create the data set it works without any issues. I wonder this would be a firewall issue. If so what are the ports I should open.
It's a enterprise installation. And we have already open 9703, 9704, and 9706.
Has anyone came across such a situation?

Talles,
First of all you might have more chance of getting a response over in the BIP forum. Other than that all I can think of is: is your MS SQL Server running with mixed mode auth?

OBIEE 11.1.1.5.0 v. installation ERROR

when I Install BI on my lap Windows 7 64x
i found this message and i can't understand what he want
"Enter the disk with label Oracle Fusion Middleware Business Intelligence 11g and disk number 4 or browse to the location containing the files for the disk, then press"
i downloaded it from
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/biee-111150-393613.html
and it was 3 disks 64x.
Please Give me the solution to install this
Thanks.

Altogether there are 5 disk and when it asks for disk 4 then select 'Disk 2 (2of2) (668 MB) (cksum 625740683)'. Goes like this
Disc 1: Disk 1 (1of2) (1.2 GB) (cksum 3814940500)
Disc 2: Disk 1 (2of2) (930 MB) (cksum 2340017112)
Disc 3: Disk 2 (1of2) (1.3 GB) (cksum 572023205)
Disc 4 : Disk 2 (2of2) (668 MB) (cksum 625740683)
Disc 5: Disk 3 (1.4 GB) (cksum 2333070171)

OBIEE 11g Front End Calculations with Presentation Variables Error

Hi Guru's,
Long time user first time poster to the forums but hopefully you can help.
I have a requirement to perform an aggregation on certain fields with a dynamic grouping requirement (so users can select which grouping they require ie, sum profit by [outlets or companies or region]).
The approach I am using is a prompt setting a presentation variable with the possible groupings for the calculation as choices, and a column in the report with a formula to SUM("table"."column" by "@{variable}{default}") this also contains a dynamic column name containing the presentation variable too.
Where the column could be profit and the variable prompt options could be outlet, company or region (from the above example).
This is currently separate from the RPD due to the dynamic nature required with groupings changing at run time and is done in the front end.
However on selecting some columns via the prompt I receive this error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22027] Union of non-compatible types. (HY000)
This only occurs on some field groupings, and is not a certain type in particular. (Including both short date, short time and varchars).
Any ideas where this problem could stem from?
Regards.

Based on given info: Try this
SUM(cast("table"."column" as int) by "@{variable}{default}")
Pls mark if helps

OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
Nitin

Hi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram

Error bringing up /analytics in OBIEE 11g

I recently installed OBIEE 11g on Solaris.
After the installation was completed, I can log into WebLogic Console and Enterprise Manager. I could not open up the <host>:9704/analytics page. All of the services required to start up were started.
After reviewing the error messages on EM, I noticed the following error messages.
Error reading object: /shared/Sample Lite/KPIs/Unit Price
Error reading object: /shared/Sample Lite/KPIs/Sample KPI
Error reading object: /shared/Sample Lite/KPIs/Revenue KPI

Hope you have strictly followed the steps mentioned in the document:
http://docs.oracle.com/cd/E21764_01/bi.1111/e10543/legacy.htm#BABGEHJJ
Specifically note : Oracle BI Scheduler Server runs Delivers jobs for users without accessing or storing their passwords. Using a process called impersonation, Oracle BI Scheduler uses one user name and password with Oracle Business Intelligence administrative privileges that can act on behalf of other users. Oracle BI Scheduler initiates an Agent by logging on to Oracle BI Presentation Services with the Oracle Business Intelligence administrative name and password.
For Delivers to work, all database authentication must be performed in only one connection pool, and that connection pool can only be selected in an initialization block for the USER system session variable. This is typically called the Authentication Initialization Block. When impersonation is used, this initialization block is skipped. All other initialization blocks must use connection pools that do not use database authentication.
Hope this helps.
Thanks and regards,
Debarati.

OBIEE 11g on Windows 7 (64 bit)

Experts,
I tried installing OBIEE 11.1.1.5 (both Simple and Software only install) mutiple times on my Laptop running Win 7 (64 bit), but all the times the installation hangs at "Creating domain", the first configuration step. Not sure what I'm doing wrong, I did all the pre-installation steps before running the setup.exe. Does anyone installed OBIEE 11g on Win 7 (64 bit). If yes, please suggest what other things I need to do for a successful installation
Regards,
Sarvan

Hi
Even though officially this is not supported on Windows 7 OS, still we should be able to install it without any issues. I installed OBIEE 11g simple edition on Windows 7, 64 Bit OS and everything is working fine. Infact I used Oracle Express Database Edition 10g instead of full blown Oracle 11g database. I used this to run RCU to create 2 obiee schemas. It did took lot of time though on windows like around 50 minutes for the full installation which installed weblogic, obiee on top of this, then create a default domain named bifoundation. I could create some test reports, dashboards etc.
Here is another link that is also successfull in installing OBIEE 11g on Windows 7, 64 bit:
http://123obi.com/2011/05/obiee-11g-11-1-1-5-0-installation-on-windows-7/
I did not do anything special.
1. Download all the installers, RCU etc.
2. First in my Oracle 10g express edition, run RCU and create 2 schemas for OBIEE.
3. Run obiee installer and wait for about an hour. It came out successfully. Started the domain, started OPMN Services, started a browser with one url.
4. One thing is. I first installed Java/JDK 64 Bit version and put this in the PATH variable. So when I run java -version, it showed me this 64bit JDK. BUT even though I did this, internally the obiee domain still used its own JDK. I checked this in the startup script file named "StartStopServices.cmd" having one property like this:
JAVA_HOME=C:\Oracle\Middleware115BI\Oracle_BI1\jdk
And also under the domain root folder like bifoundation_domain/bin/setDomainEnv.cmd, I could see JAVA_HOME using the same above location.
Thanks
Ravi Jegga

Starting obiee weblogic services in linux after simple installation

Hi all,
I have installed OBIEE 11g on linux machine with "simple installation" option, i have following questions:
with simple installation, will weblogic server will get installed?
because i am not able to open the weblogic EM page, now do i have to manually start the weblogic services in linux, if so. Can anyone illustrate the steps.
Thanks,
Sreekanth

Hi sreekanth,
with simple installation, will weblogic server will get installed?Yes it will be installed.
because i am not able to open the weblogic EM page, now do i have to manually start the weblogic services in linuxstart it manually or go to windows start/BI/start all services like that way weblogic server should start.
Nice information on linux servers up/down http://prolynxuk.com/blog/?p=375
hope answers your question.
Cheers,
KK

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

Endeca integrator not able to connect with OBIEE 11g

Hi All,
I am trying to connect OBIEE RPD(Repository) using Endeca Integrator3.0.
All credential are correct, OBIEE 11g is also up.
It show Error:
java.net.ConnectException: Unable to connect to port 7001 on machine localhost
how to reslove it.
Please give me suggestion.
Thanks
Prashant

Thanks for reply.
Endeca Server is running(Up).
OBIEE Server is also Up.
OBIEE Hostname: (ip address) i have used.
But Still I am facing same issue.
Where i get stack-trace?
Thanks,
Prashant

Unabe to start coreapplication_obips1 componenet in OBIEE 11g

This was working yesterday.. I did something today that is causing it to no longer start.. I don't know what, I have double checked the config files and nothing was changed..
Only thing I did was set up Proxy Act As.. which was working before I rebooted.. now the service wont start..
none of the logs really tell me what is wrong.. I have tried starting it from weblogic and looking at errors there..
I have also tried starting sawserver.exe described here Unabe to start coreapplication_obips1 componenet in OBIEE 11g
but that doesn't display any error, I just get a windows popup saying it failed to start.. (im on windows 2008 32bit)
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
We checked status of all OBIEE components using opmnctl command as below
F:\MiddlewareHome\instances\instance1\bin>opmnctl status
All the components are alive except coreapplication_obips1.
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 1160 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 1604 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 5484 | Alive
coreapplication_obips1 | OracleBIPresentat~ | N/A | Down
coreapplication_obis1 | OracleBIServerCom~ | 1236 | Alive
We started coreapplication_obips1component through command prompt as shown below
F:\MiddlewareHome\instances\instance1\bin>opmnctl startproc ias-component=coreap
plication_obips1
F:\MiddlewareHome\instances\instance1\bin>opmnctl startproc ias-component=coreap
plication_obips1
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=hdccrmcoe4:9501
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication
_obips1/
Error
--> Process (index=1,uid=1245712603,pid=6816)
failed to start a managed process after the maximum retry limit
Log:
none

Hi Merlin,
Few days back i faced the same issue .I installed the both 10g and 11g on same machind i bounced the presentation services and restarted the opmnctl its up!!
Dont know the reason all the ports are different.You can try to increase the scalability of presentation services to "two" and restart all services
http://download.oracle.com/docs/cd/E17904_01/bi.1111/e10541/cluster.htm#BABCABBC
Thanks,
Saichand.v

OBIEE 11g (11.1.1.5) installation issue on solaris 10

Hello all
I am trying to install OBIEE 11g (11.1.1.5) on solaris 10 and i am facing the following issue once i run the "./runInstaller"
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 53110 MB Passed
Checking swap space: must be greater than 500 MB. Actual 63528 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-02_11-38-43AM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
-bash-3.00$
Even if i run the command "./runInstaller -silent" am facing the following issue
-bash-3.00$ ./runInstaller -silent
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 52789 MB Passed
Checking swap space: must be greater than 500 MB. Actual 63521 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-02_12-22-37PM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
Please let me know how to fix this issue?
Thank you

hi
Still facing the same error after all the prerequisites are passed
Checking Temp space: must be greater than 1536 MB.   Actual 17419 MB    Passed
Checking swap space: must be greater than 500 MB.   Actual 68344 MB    Passed
Checking monitor: must be configured to display at least 256 colors.    Actual 65536    Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-05_12-38-33PM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
Please let me know if am missing something here?
Thanks

OBIEE 11G 11.1.1.6.0 installation error

Similar Messages

Maybe you are looking for