Obiee 11g creating domain error

Hi,
I am installing obiee 11g on windows 7 ..when i'm installing obiee 11g when it came to last step 14 of 15 creating domain had failed..how can i resolve this issue

Hi,
The issue due to java and static IP are not pointing to weblogic domain creation steps that why its getting erro..few months back i too face this issues and resolve it please refer my blog
Solution: while installation Enterprise/Software type ...while installing weblogic server run like below comment
D:\OBIEE111160\wls1036_generic.jar
Weblogic 10.3.5/6 64bit installtion must run like below
go --> windows --->type run ==> cmd prompt -->
C:\>cd C:\java\jrockit-jdk1.6.0_29-R28.2.2-4.1.0\bin
C:\java\jrockit-jdk1.6.0_29-R28.2.2-4.1.0\bin>java -D64 -jar D:\OBIEE111160\wls1
036_generic.jar
and another thing please make sure static IP (looback adaptor and host\etc file should be pointing like below
Install Loopback Adapter with Static IP Address
http://www.oracledistilled.com/windows/configuring-the-loopback-adapter-on-microsoft-windows/
Note: hots/host/etc file the static ip should be set like below
# localhost name resolution is handled within DNS itself.
10.10.1.7 localhost Deva-PC
(IP address host domain name host/computer name)
For refer my blog
http://obieeelegant.blogspot.sg/2012/07/obiee111160-software-only-installation.html
Thanks
Deva

Similar Messages

OBIEE 11G Create Domain Faild

os：linux 64
obiee：bi_windows_x86_111130_64_disk
when create domain faild，
pls help me！！
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3177)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3037)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1646)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:636)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3147)
     ... 19 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:687)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 14 more

Hi,
I found the issue, that is I have installed once and uninstalled it. but some of the components still not released. This is the route cause for this issue,
Solution:
Go to Run-> Services.msc -> search for the Weblogic related services.
If we found any such services running/disabled or in any state. we need to remove them.
To remove them go to run--> regedit --> HKEY_LOCAL_MACHINE --> SYSTEM--> CurrentControlSet-->Services
and then remove/delete the service..
Restart the system and try for fresh install....
Its resolved my issue.

OBIEE 11.1.1.6.0 installation error creating domain error

Hi Gurus,
I am trying to install OBIEE 11.1.1.6.0 32 bit in windows 7 RCU installed successfully but when i am installing 11G in at configuration progress for creating domain it is showing 0% only for long time and finaly it is showing creating domain failed.
when i checked log files in the inventory(c:\oracle\inventory) folder i found one error file as below
*'export' is not recognized as an internal or external command,*
operable program or batch file.
how i have to fix this error i tried more times it is showing the same error please any one help me.
plzzzzzzz any one help me i tried more times
Regards,
Edited by: 963851 on Jun 4, 2013 8:26 PM

Hi Satya,
Still i am unable to install after making all configuration which you have posted in the above posts and it is showing some different error as below:
In Err file (C:\Program Files\Oracle\Inventory\logs) it is showing
***** Could not locate the launcher command.*
*'export' is not recognized as an internal or external command,*
operable program or batch file.
In OUT file (C:\Program Files\Oracle\Inventory\logs) it is showing
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
D:\HOME\Oracle_BI1'
Running prerequisite checks...
To continue, OPatch will do the following:
*[Back up for restore] : Back up 3 files for Oracle Home restore in case of patching error.*
and you suggested that to install software only what is the difference between simple and software only install any where i will try that and get back to you.
Regards,

OBIEE 11.1.1.7.0 installation failed- Create domain error

we are facing this issue while installing OBIEE 11.1.1.1.7.0 on CentOS 7 64 BIT.
Configuataion Action Creating Domain has failed. Please check logs for details.
checking the logs under oraInventory, the logs says-
Oracle.as.provisioning.execption.ASProvWorkFlowException: Error Executing workflow.
The server was running fine but we been facing this issue for couple of days now.
I hope someone can help us with this issue.
thank,
parik

Problem : Oracle Database 11g is not certified on the current OSWhat's your problem? Message seems to be clear. Windows 2008 Release 2 (important here is Release 2) requires 11gR2,not yet released for any Windows platform.
http://www.oracle.com/technology/tech/windows/index.html
Werner

OBIEE 11g ODBC connectivity error

Hi all,
I am getting the following error when I tried to access a simple query through Answers.
"*Odbc driver returned an error (SQLExecDirectW).*
*Error Details*
*Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P*
*State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: IM002 code: 0 message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified. (HY000)*
*SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "BISample"."Product"."BRAND" s_1, "BISample"."Target"."REVENUE" s_2 FROM "BISample" ) djm*"
What I did was
1. Create a DSN 'orcl', 32 bit Oracle ODBC driver. Tested and worked against the Oracle database.
2. Import metadata using Local, ODBC 3.5 and DSN = orcl
3. Build a simple BMM and subject area
4. In the phyiscal layer, right click on a table, and select view data/update row count. Error with message "The connection has failed"
5. Hoping for the best, create a simple query in answer and got the above odbc driver error in results tab.
Interestingly, if I edit the connection pool and use OCI (my SID is also orcl), then everything works fine.
I'm new to OBIEE and hope someone can tell me if I have missed a step or make any mistakes!
Thanks!
Regards
Han Kiat

Hi All,
I am able to connect SQL Server database with OBIEE 11g RPD offline and imported metadata and verified update row count/view data but when i was trying to publish the same RPD the data is not returning also "update row count/view data" is giving and error "The connection has failed."
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
Environment:
OBIEE 11g/WLS 10.3.3/Oracle database 11g installed on RHL 5
Client tools are installed on local Vista 32 bit system.
Oracle database is working fin, where as SQL Server is giving issues.
You want me to create a ODBC connection in RHL 5 server to connect to SQL Server ? i am little bit confused here how to create !
same time i have created ODBC for oracle apps database and imported and able to view data in RPD when i am in Online mode.
When i open RPD in online mode and trying to import the data i dont have access to local machine ODBC's which is expected and if i change to "Remote Server" nothing is showing here.
Appreciate your comments on the above.
Thanks

OBIEE 11g Map Visualization Error - basemap is defined in spatial meta-data

Hi All,
I have installed OBIEE 11g successfully on my Desktop Machine, deployed the Sample Applications regarding Mapviewer and its working fine. I have seen all the Maps and they are running fine in fact they are editable and i can easily do anything with those Maps but,
The issue is that when i am going to create a new Report and try to integrate Map on it then it shows an error as display below;
A basemap is required to render a map. Please ensure that atleast one basemap is defined in the spatial meta-data
Error Details
Error Codes: EMGUNIA3
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool,
saw.threadpool, saw.threads
I have also followed this link ( http://erpthings.blogspot.com/2011/01/obiee-11g-inbuilt-mapping-and-spatial.html ) but it is also stuck on the same error at the end.
I didn't understand the problem why its giving an error like this while the Sample Application worked fine so, if there is any way to define a basemap in spatial meta-data plz guide me OR
Is there any way to integrate Map with OBIEE 11g ?
Cheers,
Masood.

This question has been solved!
Basically you need to ensure the database schema where the data source (Navteq) has been imported must have the privilege "Create Type"
This comes from the Oracle manual extract as shown below:
1.4.4.3 Creating MapViewer Array Types, if Necessary
For each database schema that it connects to, MapViewer checks for the existence of
the following SQL array types that support array-type binding variables that might
exist in some predefined themes:
■ MV_STRINGLIST
■ MV_NUMBERLIST
■ MV_DATELIST
If these types do not exist, MapViewer attempts to create them in the database schema
associated with the MapViewer data source. However, if the user associated with that
schema does not have sufficient privileges to create new types, a privileged user must
create the types by connecting to the data source schema and entering the following
statements:
CREATE or REPLACE type MV_STRINGLIST as TABLE of VARCHAR2(1000);
CREATE or REPLACE type MV_NUMBERLIST as TABLE of NUMBER;
CREATE or REPLACE type MV_DATELIST as TABLE of DATE;
Cheers.

OBIEE 11g SampleApp installing error

Hi Everyone,
I am getting following error messages in EM while deploying SampleApp from oracle for OBIEE 11g.
SEVERE: Element Type: BI_INSTANCE, Element Id: coreapplication, Operation Result: FAILED_TO_START, Detail Message: Error in starting one or more components of BI Instance; Please check the server log files for detailed message
[nQSError: 46066] Operation cancelled
[nQSError: 46066] Operation cancelled
Please help.
Thanks
Manish

Make sure all the BI services are up and running before deploying the RPD in the Enterprise manager. You can check to see if all the services are running by going to the system maintainance tab in Enterprise manager under Business Intelligence Domain. After making sure all the services are up and running, try to upload the RPD again, and make sure the RPD is not corrupted.
-Amith.

Oracle OBIEE 11g [ Create Device ]

Hi Experts
I am using oracle obiee 11g
I want to create a new device type
Navigation path
Administration > Manage Device Type > Create new device type [and fill the dialog box] when click Ok button then it gives me error
the error is
"This Device type cannot be deleted / updated as it is a pre-configured system device"

{forum:id=378} is the OBIEE forum.

OBIEE 11g Insuffcient Privileges error

Hi Experts,
I have installed OBIEE 11g in my laptop and working fine. But suddenly when I try to login web logic user am getting below error. Please help me on this.
Insufficient Privileges. "Access Home Page"
Error Details
Error Codes: C64RS3Z2
Thnaks.

Hi,
Thanks for your response,
I tried login Admin URL then click-->Manage Privileges am getting below error.
Error retrieving user/group data from Oracle BI Server's User Population API.
Error Details
Error Codes: GDU6UYHS:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 13049] User 'BISystemUser' with 'empty' permission can not query user population.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Please help me on this it is very urgent.
Thanks

OBIEE 11G Write Back Error

Hi All:
I am testing the OBIEE 11G write back function. After all the steps , there's an Error message said "Write back Error" . No other detail information. Do you have any idea about where's the problem of it?
My xml file was under the folder of 'C:\OBIEE11\Oracle_BI1\bifoundation\web\msgdb'. and the detail is as below.
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="write_back_test">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert> <update>FACT_Writeback set MAX_LY2 = '@{c1}' where PERIOD_KEY = '@{c0}'
</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Really Thanks for your help.
Sunny.Sun

Hi,
I think these is a problem with your connection pool name, please check it. It's a name of connection pool in BI administrator.
if it's not problem, Can you try my way, replace '@{c1}', '@{c0}' by @1, @2...with 1,2 is a number of column in Criteria.
It's my template :
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="SetQuotaUseID">
<XML>
<writeBack connectionPool="WB_CONN">
<insert> </insert>
<update>UPDATE biee_map_revenue SET DIST_CODE=@5 WHERE REV_ID = @1 </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Edited by: OBIEE.vn on Feb 13, 2011 6:31 PM

Oracle Business Intelligence 11.1.1.7 installation - Creating Domain error

Hi,
I am trying to install OBI 11.1.1.7. I already have OBI 10g installed in my machine. I have taken care of the following things like
1) Configuring the Microsoft LoopBack Adapter
2) Configuring Static IP
3) Installing RCU
4) JDK1.7
I have tried to use the Enterprise Install. The installation completes, however, when it proceeds to Configuration Progress stage, it hangs for quite a long time and then errors out in the Creating Domain step.
I checked the install logs and found that during the Configuration process, it is unable to create the 'nodemanager.properties' file; hence unable to find it for further steps and errors out. Part of the install log is as below:
Node Manager starting in the background
ERROR : Time out occured : nodemanager.properties file not created !!
java.io.FileNotFoundException: C:\Middleware\wlserver_10.3\common\nodemanager\nodemanager.properties (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:120)
at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3688)
at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.io.FileNotFoundException: C:\Middleware\wlserver_10.3\common\nodemanager\nodemanager.properties (The system cannot find the file specified)
Can someone please help me with this?
Thanks,
Namrata

Hi Nagireddy,
I copied below 2 dll, created loopback adapter with static IP, configured right TEMP, TMP, JDK, JAVA Home etc but still getting the same error message,
MSVCR71.DLL
MSVCP71.DLL
Do you have any other thoughts? Tried 64bit_11.1.1.6.0 as well. My system configuration is 4GB, intel core i3 processor, 64 bit, windows 7 home premium.
Any assistance from you would be more appreciated. Thanks.

OBIEE 11G [nQSError: 17001] ERROR

Hi Experts,
I've installes OBIEE 11g & upgraded the existing OBIEE 10g RPD & WebCat to the 11g but when i try to see the dashboards & reports i get the following error.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
I've already tested the database connection using the Oracle SQL PLUS ,i'm able to connect to database.
Please let me know what changes need to be donw in the RPD.
Regards,

Hi,
Try putting the tnsnames.ora of your local db client in the following directory: <obi 11g install dir>\Oracle_BI1\network\admin. Looks like OBI11g comes with an Oracle client install or something.
Regards

OBIEE 11g - create dashboard with Answers Analyse and BI Publisher Repport

Hi there,
I have one question . I create dashboard in OBIEE 11g .In my dashboard have one analyse and one bip report .I create one prompt filter , that changes the both .But I wanted when i click in analysis and change it, this change is reflected in the Report . Is this possible?
Thanks

I am talking about object permissions in the catalog (eg. Folder permissions..). This is in addition to the permissions for the data source.
You need to be able to view the folders from where you can select the analysis as a data source in the BI publisher report.
Here is an excerpt from the Guide:
For a role to access an object in the catalog, the role must be granted Read permissions on both the object and the folder in which the object resides. Permissions can be granted at the folder level and applied to all the objects and subfolders it contains, or applied to individual objects.
To grant catalog permissions to a role:
Navigate to the Catalog.
Locate the folder or object on which you wish to grant permissions and click More. From the menu, select Permissions. Alternatively, you can select the folder and click Permissions in the Tasks region.
Thanks,
BIPuser

OBIEE 11g database connection error after deploying to server.

Hi,
I deployed RPD to obiee 11g server and when I run a report it is giving database connectivity error. In 10g we just specify OLAP_DSN, OLAP_USER and same in connection pool with database password. I did the same in 11g as well but it's not working.
Is there any other place I need to specify database connection detail?
Thanks
Jay.

coming with different names :) If you respond to your older threads will happy to respond you.
When we answer your question we love to know how it helped you. we are not asking your $$$$$$$$$$$$$

Obiee 11g connection pool error

Hai Experts,
Gudmorning.I'm trying to migrate my 10g rpd to 11g.i have given the connection pool details.but it is showing the connection pool failed.
can anyone help me regarding this.??
Thanks in advance,
Chaitanya.

Hi,
Check this..http://siebel-essentials.blogspot.com/2010/09/11-obiee-11g-tips-4-connecting-to.html
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10540/conn_pool.htm#insertedID0
Even go through the link Saichand gave.
Regards,
Srikanth
Edited by: Srikanth Mandadi on Nov 19, 2010 11:12 PM

Obiee 11g creating domain error

Similar Messages

Maybe you are looking for