OBIEE 11g - Current year date and the same date in Previous year

Hi Experts,
I have an attribute say RECEIPT NO, i want to display the "No of Receipts" i.e(count(receipt no)) for any given date in the current year as well as for the same date in previous year.
Please suggest me how to achieve this in 11g.
Thanks

Hi Veeravalli,
Thanks for your prompt help.
Could you please ellobarate this. I have to display the count(receipt_no) for the last year same date.
Thanks

Similar Messages

The invoice date and the paymant date showing the same

hi sap techies
i am facing a typical problem the invoice date and the payment date is showing the same in fbl5n.the payment terms are set for 30 days that means that the payment date should be 30 days from the invoice date but in fb03 the system shows invoice date and the payment due date to be the same.
please help
kind regards

Hi,
Payment terms are calculacted either on
- Document Date
- Posting Date or
- Entry Date
You must have chosen document date in the parameters for payment term and now you must be comparing on posting date.
Check what is the parameter in payment terms.
Also check the payment terms in the document.
Good Luck!
SAP Solutioning

Why the delivery date is the same date as 'transptn plan date" & loading date' & ' good issue' & GR end date'

Hi Experts,
why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
in shipping tab i can see Planned Deliv. Time 170 Days ... wat could be the reason.
Many Thanks:
Raj Kashyap

Hi Jurgen,,
Thanks for quick reply!!
But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
\Raj Kashyap

Query with the days of a period and the same days of last year

I need a help.
We have a sales cube with daily values.
We have a query that restricts a month (0CALMONTH) and shows the daily values for this month.
No problem, we have only to put 0CALDAY on the line and the value on the columns.
But we need also to show the values of the same days from last year.
Example:
The restricted month is july/2011.
0CALDAY is on the line, so the query shows the values for
01.07.2011   110,00
02.07.2011   108,00
31.07.2011   109,00
How can we show in the same line the values for july/2011 and july/2010?
Example:
         July/2010    July/2011
01     95,00            110,00
02     96,00            108,00
31    94,00             109,00.
Thanks in advance
César Menezes

Thanks for the answers until now.
Surely a Day characteristic (ex. CA_DAY, derived from 0CALDAY) would work.
But we have this requirement in many other cubes (I posted only an example) and it's not feasible to create this characteristic now.
I understood the other suggestions, but the problem is not on selecting the values.
We have two restricted key figures, one for a period (filled by the users) and another one for this period - 12.
They work OK and bring the correct results.
The problem is on presenting the results, because as we have 0CALDAY in the line the results appear on two different lines.
Example:
15.07.2010    950,00
15.07.2011    980,00.
Is ther any way to present the results in the same line?
Example:
15.07.2011    950,00 (last year)     980,00 (today)
or
15.07             950,00 (last year)     980,00 (today)
or any other way?
César

SQL Query-return current month and the same month of last year

hello-
I would like to display the current month name, count of errors, year, and month number for both current year and previous year. Having trouble getting my query to display as following.....
Month   CountofErrors     Year    MoNo
January                 57    2015          1
January                 155   2014         1
thank you!

Its hard to answer without DDL and DML and sample data.
Give a try
select DATENAME(month,getdate()),Month(getdate()),YEAR(getdate()) ,COUNT(*) from dbo.errortable
where DATENAME(month,getdate())='January' and YEAR(getdate()) in(YEAR(getdate()),YEAR(getdate())-1)
group by DATENAME(month,getdate()),Month(getdate()),YEAR(getdate())
--Prashanth

Why the long wait between the pre-order date and the shipping date of the Motorola Razr??????????

I don't understand Why Verizon made the shipping date for the Motorola razr two full weeks after the pre-order date? Versus what it did with the iphone 4s where the dates were only 1 week a part. I order it on the 27th.

I know I really can't wait to get the phone. I was hoping it might come a little earlier than the 10th but probably not.

If I erased all data and the games data how I can play with games and i lost my data

Help me please

Connect the iPad to your computer's iTunes and copy any purchases off the iPad (which will include apps) to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of your computer's iTunes and selecting 'Backup' (a backup will include your apps content and settings).
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

First Date of the Given date and month

Hi Evryone,
I want to extract first day of the given date.
For Ex: i aam giving date "30-jan-2013" but i want to show "01-jan-2013".
In Oracle, Trunc function behaving mentioned above. So i need appropriote function in HANA to get the FIRSTDATE....
I observed HANA Given last_date function but what about First_Date function? can i use it?
Regards,
Chandrakanth

Hi Chandrakanth,
Did you have a look on this blog:
SAP HANA: Get the First Date and the Last Date of Month from a Given Date | WuaWua
There is LAST_DAY in HANA but not FIRST_DAY.
Since last day of the month may vary but first day of the month will always be '01'. Hence they may not have added that function.
So either you can follow that approach in the blog or you can simply replace the day '01'.
Regards,
Krishna Tangudu

APP-PAY-06841: Person change exit between the old and the new date.

Hi,
Please help me by answering this question as very urgent basis.
ABC employee Effective date should be of future dated 10-jan-2011.
But ABC employee joining date has been entered on 10-Aug-2010.
amd also this date is also ended by updating on 10-Dec-2010.
But these records are wrong.This employee's effective date should be form 01-Jan-2011.
how to datetrack.
if iam changing the date bye keeping effective date as 10-Dec-2010 an an iam changing the record to 01-jan-2011,its throwing the error as "**APP-PAY-06841: Person change exit between the old and the new date**"
Thanks&Regards,
Sowmya.K

What is the application release?
Please see these docs.
Error: APP-PAY-06841: Person changes exist between the old date and the new date [ID 399056.1]
APP-PAY-06841 When Changing Latest Start Date Of An Employee Who Was An Ex-Contingent Worker [ID 1146414.1]
Unable To Change Start Date for Employee, Get Error "APP-PAY-06841: Person Changes Exist Between The Old Date And The New Date" [ID 603233.1]
Correcting Latest Start Date in People Screen Gives Error APP-PAY-06841 [ID 368289.1]
How To Change the Latest Start Date of an Employee? [ID 329692.1]
Thanks,
Hussein

Using attribute as a set of data and parsing this data

Hi everyone,
I present below a (little) challenge with the use of attributes in XQuery. Consider the following XML document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Each client of the showroom is identified by a unique Id (e.g., 1,2,3,....). Then, i want to add some data to my XML document which should represent, for each car, the set of all clients' Id that have rented this car.
The desired XML document could look like this:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
+*<history>*+
+*<client id="2"/>*+
+*<client id="23"/>*+
+*</history>*+
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
+*<history>*+
+*<client id="56"/>*+
+*</history>*+
</car>
</showroom>
However, by using elements in order to represent the rental historic, the document's size will increase significantly.
As i use only the clients' id, are there any way to represent the history data using only attributes ?+.
In the following document, the clients' id are represented, as a set, through the attribute +@history+:
<showroom>
<car id="1" history="2,23">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n" history="56">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
However, are there any way to check if a given car of id='x' has been rented by a client of Id='y' ?+.
Does someone know how to represent the history data (sequence of clients' id), using only attributes, and how to look for a given client's id as explained above ?
Please suggest. I appreciate your help.

The two following documents represent examples of the showroom data and the clients' data respectively:
First document:
<showroom>
<car id="1">
<name>Clio</name>
<family>Renault</family>
</car>
<car id="n">
<name>Q5</name>
<family>Audi</family>
</car>
</showroom>
Second document:
<clients>
<client id="2">
<name>...</name>
<firstname>...</firstname>
<driverLicence serialNumber="2156311"/>
</client>
</clients>
The DTDs of these documents are defined as follows:
The showroom DTD:
<!ELEMENT showroom (car)*>
<!ELEMENT car (name,family)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT N3 (#PCDATA)>
<!ATTLIST car id ID #REQUIRED>
The clients DTD:
<!ELEMENT clients (client)*>
<!ELEMENT client (name,firstname,driverLicence)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT firstname (#PCDATA)>
<!ELEMENT driverLicence EMPTY>
<!ATTLIST client id ID #REQUIRED>
<!ATTLIST driverLicence serialNumber ID #REQUIRED>
Whenever a car is rented, I must add some information either in the same showroom document (it will be better for me) or in another document which relies rented car id with the id of the client which rented this car.
Thanks in advance for your help.

Billing document date and accounting document date varying...

Hello Experts,
There is one billing document and the date of invoice is, say today, 12/01/2009. and the accounting document date is, say 15 days ahead or behind, 27/01/2009.however, the posting date is proper and according to the billing date and that is again dated today-12/01/209. Now, the user wants to know why the difference exists between the accounting document date and the billing date. any idea? there are some user exits being used but I cant make out, neither the abaper. suggestions please.
Regards,
N.Raja Sekhar.

Dear Raja Sekhar
Document date is nothing but the date on which that particular transaction has taken place. But I dont know where you get the date as 27-01-2009.
It is a general practice that for exports billing document, there would be a Posting block and once the exporter receives the B/L, based on that date, the billing document would be released manually. For this, there is an user exit to input the B/L number and date and release the billing document.
So here, what the end users normally does is that the B/L Date might be on 02-01-2009 but he would not have updated on the same date. At a later date, say on 12-01-2009, he can input the B/L Date (in another words, it is Posting date) as 02-01-09 and execute the billing document.
If you see the accounting document here, the posting date would have been 02-01-2009 but the document date would be 12-01-09.
thanks
G. Lakshmipathi

Extend End date after the end date has reached

Hi gurus,
    We are using SRM5.0 on ECS with backend ECC5.0.
    We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
    If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
    We just want to know how to avoid this in the term of system. Can we make the
end date field unchangeable after the end date has reached? or any other solutions?
Thank you in advance.
Message was edited by:
        YE Wang

Hi,
As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
</b> can be done at all after the END date has been reached.
In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Fixed start date and variable end date

I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.

WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John

I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?

I have an A1288 ipod touch I bought about 3 years ago. I am currently trying to download an app however the I'm getting an error message which is essentially saying that the "ios" I'm using isn't up to date and the itunes summary says otherwise?
Other forums state I have to buy a new one but what happens when this happens again I think I'm moving to another brand this is crazy?

Yes, there's a limit, and that iPod touch has reached it.
(72099)

Upon transferring to the cloud, all my previous mail says the same date, except for today and yesterday. The rest says it came in on the same date I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...

Upon transferring to the cloud, all my previous mail says it entered my box on the same date, except for today and yesterday. Everything else says it came in on the same date on which I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...only when I moved. I have bad feelings about being to fix this...Any suggestions?

Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo

OBIEE 11g - Current year date and the same date in Previous year

Similar Messages

Maybe you are looking for