OBIEE 11g: Error - Exceeded configured maximum number of allowed output
Hi Guys,
We are implementing OOTB Repository, After data load some of the reports are showing the following error msg. Can anyone point me out where to change the limits?
"Showing error while loading ""View Display Error
Exceeded configured maximum number of allowed output prompts, sections, rows, or columns"". It must be because of the restriction on the number of records in a report"
Thanks in advance
Sudipta Gupta wrote:
Hi Guys,
We are implementing OOTB Repository, After data load some of the reports are showing the following error msg. Can anyone point me out where to change the limits?
"Showing error while loading ""View Display Error
Exceeded configured maximum number of allowed output prompts, sections, rows, or columns"". It must be because of the restriction on the number of records in a report"
Thanks in advanceWhat version of OBIEE are you using? Assuming you are on 11g, below is the link that tells you what tag's needs to be changed in the configuration file in order to increase/decrease the limit on number of rows retrieved in a report across the board:
http://r12bifmw.com/2012/03/23/obiee-errors-with-exceeded-configured-maximum-number-of-allowed-output-prompts-sections-rows-or-column/
Hope this helps.
Similar Messages
-
Exceeded configured maximum number of allowed output prompts, sections,
Hello Gurus,
when i am adding two graphs prompts(Year, State) on my report here is the error is am getting, Exceeded configured maximum number of allowed output prompts, sections, rows, or columns. Please advise
Thanks,
RCHi,
Try to update below
<Prompts><MaxDropDownValues>6000</MaxDropDownValues></Prompts> in instanceconfig.xml.
<MaxCells>1920000</MaxCells>
<MaxVisibleSections>1000</MaxVisibleSections>
<MaxVisiblePages>10000</MaxVisiblePages>
For more refer
http://r12bifmw.com/2012/03/23/obiee-errors-with-exceeded-configured-maximum-number-of-allowed-output-prompts-sections-rows-or-column/
Thanks
Deva -
Exceeded configured maximum number of allowed output
I keep getting 'Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.'
Error Codes: IRVLJWTA
Location: saw.views.dashboard, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threads
Edited by: 990266 on Apr 8, 2013 8:04 AMCongratulations for managing to ask probably the most frequently asked question on this forum, and without even forming it into a question either.
http://lmgtfy.com/?q=Exceeded+configured+maximum+number+of+allowed+output+prompts%2C+sections%2C+rows%2C+or+columns. -
So, I am getting the above error message when trying to access one of the dashboard reports. I know there are some limitations on certain views.
However, my boss is asking if I can find out how many rows I m trying to run before increasing number rows. I don’t know how to find out the number rows the report is trying to run.. Does anyone know how do that? Please please help.
thxyes the formula should give you same information (no.of rows that report has)
have you tried it ?
Thanks,
Saichand -
Error message in the report: Exceeded configured maximum number of allowed
Hi,
When i'm running one report, it's throwing the following error.
Error
View Display Error
Exceeded configured maximum number of allowed input records.
Error Details
Error Codes: EKMT3FK5:OI2DL65P
SQL Issued: 3302~v9p2gfbm0sfk91lrj16oe7srm2
This is most common error. my report is retreiving 469,501 rows in the database.
These are the settings in the instanceconfig.xml :
<Views>
- <Pivot>
<MaxPagesToRollOutInDelivery>1000</MaxPagesToRollOutInDelivery>
<MaxVisibleColumns>500</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>1000000</MaxVisibleRows>
<MaxVisibleSections>10000</MaxVisibleSections>
<DefaultRowsDisplayed>1000000</DefaultRowsDisplayed>
- <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
-->
<DefaultRowsDisplayedInDelivery>1000</DefaultRowsDisplayedInDelivery>
- <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
-->
<DefaultRowsDisplayedInDownload>100000</DefaultRowsDisplayedInDownload>
- <!-- This Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware Control
-->
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
Max visible rows are higher than my report rows, but still it is throwing error.
Please any suggestions !!!!
Thanks in AdvanceJust in case try to set other views and see how it works
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/answersconfigset.htm#CIHHBHEB
In WebLogic FMW Control or EM:
http://server.domain:7001/em
Click on Fam_bifoundation_domain -> Business Intelligence -> coreapplications -> Capacity Management -> Performance
Maximum Number of Rows Processed when Rendering a Table View
Number Of Rows:
Maximum Number of Rows to Download
Number Of Rows -
IRVLJWTA: Exceeded configured maximum number of allowed ...
Hi all,
when creating a pivot table and setting a colom into the section, i'm getting the IRVLJWTA: Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.
Can anyone give me an hint where to configure this setting?
Thanks
SandraHi,
This may help u
http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
Regards,
Suresh -
Hi,
I have configure stream analytics to read messages from eventhub and I am getting this error message:Correlation ID:
e185534f-9e82-4efc-8050-5294796fb275
Error:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5 TrackingId:4569eca8-cb70-4c50-96cd-5868bfbc3e37_B45,TimeStamp:1/7/2015 11:40:37 PM TrackingId:f408292e-0dab-40cc-8ae9-2730313c3241_B45, Reference:8fca3c6a-b0d1-41cf-a835-f7c74a2ea8c3,
Timestamp:1/7/2015 11:40:37 PM
Message:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5
Message Time:
2015-01-07 23:40:38Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.naveenevents_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Receive Events
Microsoft.Resources/ResourceUri:
/subscriptions/f122f431-ddc7-4e21-ae3a-f6a9e1273bcb/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/Naveenstreamanalytics
Type:
EventHubInputAdapterEventHubFailure
Any help on the same is appreciated.
Thanks
NaveenHi Naveen,
Thanks for reporting this issue. We are taking a look at this issue.
Questions:
Do you have multiple readers reading from this EventHub, or have you setup multiple Stream Analystics jobs reading from this event hub. You are hitting a limitation of how many readers are allowed per EH consumer group.
What is the serialization format of your input (JSON/CSV)? Could you please verify the serialization format setup in the streaming job and if it matches your data?
Thanks
Zafar Abbas -
Customize Error Message: Exceeded configured maximum number of...
I realize the "Exceeded Configured Maximum..." error message results from a certain threshold being passed. But would anyone know where I would start to customize that message to add some more user-friendly information, such as "Use more specific criteria to filter the results".
I assume it is housed in java file but didn't know if any one has tried to customzie this message?
Thanks.Just in case try to set other views and see how it works
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/answersconfigset.htm#CIHHBHEB
In WebLogic FMW Control or EM:
http://server.domain:7001/em
Click on Fam_bifoundation_domain -> Business Intelligence -> coreapplications -> Capacity Management -> Performance
Maximum Number of Rows Processed when Rendering a Table View
Number Of Rows:
Maximum Number of Rows to Download
Number Of Rows -
Maximum number of allowed pages in Pivot Table exceeded Configured Limit:
When trying to create Calculated Item on Pivot table Page section Item like Division dim the calculated item is 'All' -> sum * and Customer again the calculated item is 'All -> sum * . it performs the first calculation (for division) but in the next one it gives the error
"Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000)."Try limiting the resultset or upgrade the [MaxVisiblePages]
see: http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
regards
John
http://obiee101.blogspot.com -
Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.
Is your I tunes ID an @me.com ID? If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes
-
Maximum number of allowed pages in Pivot Table exceeded
Hi,
I am working on Oracle Business Intelligence 10.1.3.2.1 . We have a requirement to show one report in the Pivot layout.
But it throws one error: "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000) "
So I have modified the Instanceconfig.xml with the following piece of code:
<PivotView>
<MaxVisibleColumns>9000</MaxVisibleColumns>
<MaxVisiblePages>90000</MaxVisiblePages>
<MaxVisibleRows>9000000</MaxVisibleRows>
<MaxVisibleSections>9000000</MaxVisibleSections>
<ResultRowLimit>9000000</ResultRowLimit>
</PivotView>
<CubeMaxRecords>9000000</CubeMaxRecords>
<CubeMaxPopulatedCells>9000000</CubeMaxPopulatedCells>
The number of records is 30 398. In another report the amount is much higher than this number of records and bring it with no problem.
Can anyone please look into this Issue.Hi
Try checking the link
http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
Hope this helps
Regards
Debo -
I am unable to connect database this error ORA-00020: maximum number of
i issuing this command / as sysdba .getting this error
Enter user-name: / as sysdba
ERROR:
ORA-00020: maximum number of processes (300) exceeded
how to resolve this problem.it is verry verry urgent.Hi
"Maximum number of processes exceeded" will be alerted when your database has received a request for connection from a process which is beyond the number of processes your database can allow for.
Please check your database parameters
show parameters processes
Couple of options:
a) If your database has been running for a while and if it's the first time you are recieving this error, please check why all of a sudden more and more processes have been created. You may want to investigate your application, users, etc
b) If it's a valid request and if it's the case that you haven't really configured enough processes, you will have to increase the PROCESSES parameter in your init file and restart the database. It's not a dynamic parameter. Also, make sure you increase the sessions parameter as well along with the processes.
Before you do this, you will also have to check if your OS has been configured for increasing the number of processes. Think it's semmsl in Unix. -
ORA-22290: operation would exceed the maximum number of opened files or LOB
i am getting this error in a procedure.
ORA-22290: operation would exceed the maximum number of opened files or LOBs
22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
// *Cause: The number of open files or LOBs has reached the maximum limit.
// *Action: Close some of the opened files or LOBs and retry the operation.
NAME TYPE VALUE
session_max_open_files integer 10
Procuedure:
CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
P_EVENT_KEY IN VARCHAR2,
X_STATUS_MSG OUT VARCHAR2,
X_STATUS OUT NUMBER
)AS
l_parser dbms_xmlparser.Parser;
domdoc xmldom.DOMDocument;
nodelist XMLDOM.DOMNODELIST;
node XMLDOM.DOMNODE;
n_child XMLDOM.DOMNODE;
elements XMLDOM.DOMELEMENT;
name_node_map XMLDOM.DOMNAMEDNODEMAP;
parent_seg varchar2(4000);
tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
chile_seg VARCHAR2(4000);
p_seg VARCHAR2(4000);
p_seg1 VARCHAR2(4000);
p_seg2 VARCHAR2(30);
p_int_name VARCHAR2(50);
col_value VARCHAR2(100):=NULL;
len1 NUMBER;
cnt NUMBER;
seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_seq_set VARCHAR2(3); --brad coding
parent_id number; ---brad coding
valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
data_status VARCHAR2(10);
v_main_seg VARCHAR2(50);
v_seq_no NUMBER;
V_CLOBLOCATOR CLOB;
V_FILELOCATOR BFILE;
v_amount_to_load NUMBER;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
warning NUMBER;
v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
DIRECTORY_PATH_INVALID EXCEPTION;
PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
NO_PRIVILEGES EXCEPTION;
PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
INVALID_DIRECTORY EXCEPTION;
PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
FILE_NOT_FOUND EXCEPTION;
PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
v_whid poldat_view.wh_id%type;
BEGIN
--NAME : PROC_WMS_XML_READ.PLS
--DESCRIPTION :
-- Procedure PROC_WMS_XML_READ search XML files from remote location.
-- Open,Parse and Read XML files. Store all XML values into tables.
-- Developed by Dharmesh Patidar(jw782)
-- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
-- by Vishwanath Dubey(jl246) on 17-June-2011
-- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
BEGIN
SELECT event_name,file_name,WAREHOUSE_ID
INTO v_event_name, v_file_name,v_whid
FROM usr_oub_file_process_details
WHERE event_id=p_event_key
AND process_flag='U';
EXCEPTION
WHEN NO_DATA_FOUND THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN TOO_MANY_ROWS THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN VALUE_ERROR THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
/*LOGIC TO READ XML FROM REMOTE LOCATION START*/
DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
V_FILELOCATOR ,
V_AMOUNT_TO_LOAD,
DEST_OFFSET,
SRC_OFFSET,
0,
LANG_CONTEXT,
WARNING);
dbms_lob.close(V_FILELOCATOR);
/*LOGIC TO READ XML FROM REMOTE LOCATION END*/
/*Temporary Code to help with debug Clear the table before populating it with new data*/
--delete table BRAD_XML_DEBUG;
cnt:=1;
seg_id_bkp:=0;
data_status:='N';
v_seq_no:=0;
prev_seq_set:='NO';
/*create new parser.*/
l_parser := dbms_xmlparser.newParser;
dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
/*Parse the document and create a new DOM document.*/
domdoc :=dbms_xmlparser.getDocument(l_parser);
/* get all elements in the DOM*/
nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
len1 := XMLDOM.getLength(nodelist);
/* loop through elements of the DOM */
FOR j in 1..len1-1 LOOP --MAIN LOOP START
BEGIN
/*below sql will fetch Node from table to travel xml data*/
BEGIN
SELECT int_name,tag_name
INTO p_int_name, p_seg1
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND seq_no =cnt;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN OTHERS THEN
NULL;
END;
IF cnt=1 THEN
v_main_seg:=p_seg1;
END IF;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN no_data_found THEN
null;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*LOGICS TO READ XML START*/
node:=XMLDOM.item(nodelist, j);
elements:=XMLDOM.makeElement(node);
parent_seg:=(xmldom.getTagName(elements));
tag_name_bkp:=(xmldom.getTagName(elements));
name_node_map:=xmldom.getAttributes(node);
n_child:=xmldom.getFirstChild(node);
col_value:=xmldom.getNodeValue(n_child);
/*get the sequence number from the interface hierarchy table */
SELECT count(1)
INTO valid_seg
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
if valid_seg>0 then
begin
SELECT seq_no
INTO sequence_bkp
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
seg_id_bkp:=seg_id_bkp+1;
p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
end;
end if;
if prev_seq_set = 'NO' then
begin
prev_sequence := sequence_bkp;
prev_seq_set := 'YES';
end;
end if;
if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
begin
select max(seg_id)
into parent_id
from usr_wms_global_xml_det
where seg_sequence = sequence_bkp-1;
prev_sequence := sequence_bkp;
end;
end if;
if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
parent_id := seg_id_bkp-1;
prev_sequence := sequence_bkp;
end if;
/*end getting the hierarchy table sequence */
/*LOGICS TO READ XML END */
IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
if parent_seg=v_main_seg then
v_seq_no:=v_seq_no+1;
end if;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END ;
p_seg:=parent_seg;
p_seg2:=P_SEG1;
cnt:=cnt+1;
ELSE
chile_seg:=parent_seg;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
END IF;
END LOOP; --MAIN LOOP END
dbms_xmldom.freeDocument(DOMDoc);
x_status:=0;
EXCEPTION
WHEN DIRECTORY_PATH_INVALID THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN FILE_NOT_FOUND THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN NO_PRIVILEGES THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(DOMDoc);
RETURN;
END PROC_WMS_XML_READ;
Edited by: user13427480 on Feb 8, 2013 7:08 PMwhen you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417 -
Error:- ORA-01795: maximum number of expression in a list is 1000
Hi All,
we are using database 11g.
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
i am getting one error while selecting the data from table.
SELECT interco_type, entity, chapter_entity, tran_currency, source_id_entity,
tran_id_entity, mirror_id, gaap_type, counterpart
FROM t_gri_reconid_dtl_agg_gcr;
or
select * from t_gri_reconid_dtl_agg_gcr where rownum = 1 ;
Error:- ORA-01795: maximum number of expression in a list is 1000 ( error is same in both the case )
Please help me if any body got to this situaltion.
regards
shyam~Hi,
thanks for your response.
i dont have VPD and FGAC installed in my desktop.
select * from all_objects where object_name=upper('t_gri_reconid_dtl_agg_gcr');
here is the few rows from the above query as there are lot of rows. Please let me know if you need more rows.
PUBLIC T_GRI_RECONID_DTL_AGG_GCR 10114957 SYNONYM 26-NOV-12 26-NOV-12 2012-11-26:22:09:41 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1 10114668 10320109 TABLE PARTITION 26-NOV-12 28-JAN-13 2012-11-26:22:02:14 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_10 10159558 10320125 TABLE PARTITION 12-DEC-12 28-JAN-13 2012-12-12:16:51:49 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1003 10255173 10322000 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:00:02:58 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1004 10255219 10322002 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:00:05:29 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1005 10255263 10322004 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:00:09:36 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1006 10255311 10322006 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:00:12:40 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1007 10256040 10322008 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:06:41:32 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1008 10256200 10322010 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:03:39 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1009 10256241 10322012 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:08:42 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1010 10256294 10322014 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:17:15 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1011 10256337 10322016 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:20:12 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1012 10256393 10322018 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:25:29 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1013 10256434 10322020 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:28:25 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1014 10256475 10322022 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:32:11 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1015 10256516 10322024 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:37:25 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1016 10256557 10322026 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:39:29 VALID N N N 1
GCRGRIT$OWNER T_GRI_RECONID_DTL_AGG_GCR GRI_1017 10256607 10322028 TABLE PARTITION 15-JAN-13 28-JAN-13 2013-01-15:08:43:24 VALID N N N 1
regards
shyam~ -
VL09 hit error 'F5 727 ("Maximum number of items in FI reached")'
Hi,
I have one user who is trying to cancel GI for DO using transaction VL09 and hit the error 'F5 727 ("Maximum number of items in FI reached")'. I know it is caused by FI document maximum item no is hit. Is there a solution to cancel this GI document? I have checked on SAP note: 0001353827 AC interface: Document split in FI for goods movements, but it does not solve my issue since the system release version is not compatible.
Please help.
Thanks in advance.
Regards,
Ling LingI need to use VL09 to cancel the document, because I need to change the currency on the preceding document (PO).
The case is a user created a Supply Chain PO, a DO created by reference to PO, then post good issue and post good receipt. Then user found out the currency in PO was wrong, so did cancellation on good receipt and good issue. Good receipt is cancelled successfully, but cancel good issue via VL09 hit error.
Instead of applying summarisation in FI, any suggestion for this issue?
Thanks.
Maybe you are looking for
-
Hi, I have followed the steps in the following link: Make an External List from a SQL Azure table with Business Connectivity Services and Secure Store, but I keep receiving the following message when I try to access an external list: "Unable to rende
-
Creative cloud crashes in windows 8.1 not impressed
I'm starting to get frustated by this new creative cloud thing... Windows 8.1 and getting this error. Adobe .. SORT THIS OUT! I pay a fee monthly for service... not to be locked out. I have tried the delete obd file.. It still doesn't work.
-
Node eviction issue in Windows 10.2.0.4 RAC
Hi, In one of my windows 10.2.0.4 RAC setup, the 2nd node is frequently getting evicted. Following are the contents of OCSD.log taken from the 1st node (as the 2nd node is down and not able to access) [ CSSD]2012-12-18 16:27:01.084 [5624] >WARNING
-
Need help specifying PDF folder location in Javascript
We currently have a bit of Javascript that opens a PDF file when the user clicks the Open PDF button. The script is: //External link button function border=0></a> <script var ButtonID="PDF1"; var View="User Guides\\WiMAX User Guid
-
Quiery about 12.0.3 Patchset
Dear all, We had Installed R12 v3 succesfully and and we have applied Support Diagnostic Patches. 6280873 6265820 but I have checked the about oracle application screen shows the 12.0.0 version as application version why? and We have checked in the d