OBIEE 11g installation error while configuring (opmnctl error)

While installing OBIEE 11g (11.1.1.3.0),(32-bit) we have choosen software only install and the software was installed successfully. While configuring in 10 th step we are getting the following errors.
We have installed webserver before installing OBIEE 11g.
OS is Windows server 2008
Executing: opmnctl start coreapplication_obips1 falied and
Executing: opmnctl start coreapplication_obisch1.
we are using dynamic IP address

Thanks, It worked. I unzipped all the folders in a single folder and then with the single Setup.exe it automatically loaded the complete software.
Best Way - Import all the download file into a single folder and run the .exe
Thanks,
Raman

Similar Messages

  • OBIEE 11g Installation Fails at configuration process

    Hi All,
    I tried installing OBIEE 11.1.1.5.0 in my machine.Below are the prerequsite which I followed and the laptop system configuration details.
    Pre-Requisites Followed : 1) Creation of Static IP address,2) Created Schema's using RCU In Oracle 11g Database.
    Laptop Details : OS-Windows 7,Ram 3 GB and space for Installation nearly 14 GB.
    Installation Type: Simple Installation
    Issue : There are 14 steps in the wizard.I have succeeded till step 12 which is called "Installation Process",But in Step 13 'Configuration progress' the wizard says Creating Domain status as 'In Progress' which stays in the same status even after 2 hours.So I am not able to complete installation Process as the wizard is not completing the Step 13 process which is 'BI Configuration'. This is the 4 attempt Iam trying the installation and the output is failure in the installation of OBIEE 11g on my machine.
    Known Issue : Also when I executed the setup file for running the installation file in 'Drive:\bi_windows_x86_111150_32_disk1_1of2\bishiphome\Disk1\setup.exe',in the command prompt i got a warning message like swap space is 0.But I ignored that error and I gave 'y' to proceed further for the installation.As this swap space issue was common in many of our folk installation process which has ended in successful installation.
    Help Needed : Can any one suggest me what will be the cause for the issue,or any Pre-requisite is missing,or the installation steps which I need to follow to make my installation successful.
    Thanks in advance,
    Regards
    Kris

    - all installation files must be in a folder without spaces.
    Try to decompress all files in c:obi11g for exemple and restart installation.
    Or
    - You may have a temp directory in the path C:Documents and Settingsuser_nameLocal SettingsTemp. You got the above mentioned exception because of the temp directory path having spaces in it.
    Solution:
    1. Create a new directory called TEMP in a different location for ex: C:TEMP
    2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
    3. You should be having TEMP and TMP as variables under user variables section pointing to the C:Documents and Settingsuser_nameLocal SettingsTemp path.
    4. Edit the TEMP and TMP variables and mention C:TEMP in the variable value.
    5. Deinstall and re-install OBIEE 11g.
    regards
    srinivas

  • OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"

    OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"
    it is the lost step of OBIEE-11g installation and it failed "opmnctl start coreapplication_obips1".appriciate for early reply.
    "opmnctl task failed" Taks executing "opmnctl start coreapplication_obips1" is failed.OBIEE Guru's help urgently.
    Edited by: RAGHAVENDRA HARI N on Sep 11, 2012 5:09 PM

    Hi, check the server logs inside <@yourBIPath>/bifoundation/diagnostics/OBIEEPresentationservicecomponent and OBIEE servercomponent.
    This may sound silly, but are your servers&the nodeman up and running?
    Regards,
    D

  • OBIEE 11g installation - OutOfMemoryError: PermGen space

    Hi All
    OBIEE 11g installation fails at configuration step with the following error:
    Creating a new AdminServer Object ...
    AdminServer port is 7001
    Starting the domain ...
    java.lang.OutOfMemoryError: PermGen space
    java.lang.OutOfMemoryError: PermGen space
    We tried to set the set JRE_MEMORY_OPTIONS in oraparam.ini file and ran the config.bat too.
    While running config.bat, the setup is asking for "Scale out BI" and not for creating New domain.
    So we are unable to continue with the installation.
    Has anyone faced this error.
    We are installing on Win7 64 bit machine.
    Thanks
    Edited by: 943911 on Aug 8, 2012 5:17 AM

    increase permgen space like this:
    -XX:PermSize=256m
    -XX:MaxPermSize=256m
    If not try enabling permgen garbage collection with
    -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled

  • Error while Configuring Repository INS0017: Installation of the seeded data

    I am getting error while configuring repository at 36%
    Error:
    Seeding Failed:
    The warehouse builder workspace owner installation failed on user OWBSYS.
    INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
    xmlClasses.xml (Access is denied)
    Operating system: Windows 2008 server 64 bit
    Database: Oracle 11g Release 11.2.0.1.0 64 bit
    Log file is not created in given location(Unified repos)

    Hi David,
    But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
    and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
    Nawneet

  • Error when trying to run the rcu.bat file as part of OBIEE 11g installation

    when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
    "windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
    Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
    Thanks
    Manoj

    after setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
    please help me finding a solution to this error....
    and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
    can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
    thanks
    Manoj
    Edited by: mkumar on Jun 2, 2011 3:47 AM

  • OBIEE 11g installation got struck in "Configuration Process"

    Hi
    I am trying to instal OBIEE 11g 11.1.1.5.0 on Win 7 computer on MS Sql server Express.
    Every went smooth with RCU, and OBIEE 11g installation upto step 12.
    Now in Step 13, 'Configuration Process', the installer got struck forever showing:
    BI Configuration -> 0%
    Creating Domain -> In Progress
    and rest of all the items in 'Recommended' status.
    How can I make this move forward?
    I see no activity going on in logs etc. Looks like installer got struck 'creating domain' activity forever.
    Thanks for any inputs.

    Please find the error messages from log: Thanks for any inputs.
    Creating a new AdminServer Object ...
    AdminServer port is 7001
    Starting the domain ...
    LOADING DLL : C:\obiee\obieemiddlewarehome\Oracle_BI1\install\config\\StartUtil64.dll
    DEBUG : Loading DLL : C:\obiee\obieemiddlewarehome\Oracle_BI1\install\config\\StartUtil64.dll
    DEBUG : Loaded DLL : C:\obiee\obieemiddlewarehome\Oracle_BI1\install\config\\StartUtil64.dll
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3179)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
         ... 19 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 14 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 14 more

  • Dac error while configuring

    Hello All,
    I am trying to configure Dac on windows7 64 bit but getting the error...
    Configuration: Windows7 64bit
    Oracle DB: Oracle 11g
    Dac Version : 10.1.3.4.1
    Informatica: 9x
    Obiee 11g
    Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
    Created the user Dac_rep with all the required privileges.
    But still getting below error while configuring and testing:
    MESSAGE:::The Network Adapter could not establish the connection
    EXCEPTION CLASS::: java.sql.SQLException
    oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
    oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
    oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
    oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
    java.sql.DriverManager.getConnection(DriverManager.java:582)
    java.sql.DriverManager.getConnection(DriverManager.java:185)
    com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
    com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
    com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
    ::: CAUSE :::
    MESSAGE:::The Network Adapter could not establish the connection
    EXCEPTION CLASS::: oracle.net.ns.NetException
    oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
    oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
    oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
    oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
    oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
    oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
    oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
    oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
    oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
    java.sql.DriverManager.getConnection(DriverManager.java:582)
    java.sql.DriverManager.getConnection(DriverManager.java:185)
    com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
    com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
    com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
    ::: CAUSE :::
    MESSAGE:::Connection refused: connect
    EXCEPTION CLASS::: java.net.ConnectException
    java.net.PlainSocketImpl.socketConnect(Native Method)
    java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    java.net.Socket.connect(Socket.java:519)
    oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
    oracle.net.nt.ConnOption.connect(ConnOption.java:123)
    oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
    oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
    oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
    oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
    oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
    oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
    oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
    oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
    oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
    java.sql.DriverManager.getConnection(DriverManager.java:582)
    java.sql.DriverManager.getConnection(DriverManager.java:185)
    com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
    com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
    com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
    Kindly help, already googled but no luck.
    Thanks & Regards
    Anu

    Check your config.bat config
    just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows

  • OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

    Hi,
    I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
    Severe: Element Type:Domain
    Element id: null
    Operation result: failed to obtain domain file lock
    Detail Message: java.util.concurrent.timeoutException.Timeout;
    waiting for lock: Domain config lock;
    c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
    Step Distributing Repository failed
    Configuration Action 'Distributing Repository' has failed. Please check logs for details.
    Step Distributing repository failed
    I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
    I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
    I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
    Here is the snapshot of the log file which I could found.
    INFO: Current Inventory:
      Oracle Home: OraDb11g_home1
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1858390736
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082373
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082374
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1597391518
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1285215443
      This Oracle Home has not been changed in this session.
    INFO: Ending the inventory Session
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    Can someone please help me with this since I am stuck with for quite some time now.
    Is there any way to check in command prompt to check the locale as required by the system.
    What could be the issue here?
    Thanks,
    Nitin

    Hi all,
    We are able to resolve the above issue with the below solution.
    Root cause of the issue:
    You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
    Solution:
    1. Create a new directory called TEMP in a different location for ex: C:\TEMP
    2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
    3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
    4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
    5. Deinstall and re-install OBIEE 11g.
    Happy OBIEE 11g installation!!
    Thanks,
    Rajesh Gurram

  • Error while Configuring  environment parameters

    Hi,
    I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
    Database- Oracle 11g R2
    OS- Windows Server 2008
    1. Environment Description
    Environment Description: DEV01
    2. Business Application Server Configuration
    Business Server Host: 01HW342889
    WebLogic Server Name: myserver
    Business Server Application Name: SPLService
    MPL Admin Port Number: 6502
    MPL Automatic startup: false
    3. Web Application Server Configuration
    Web Server Host: 01HW342889
    Web Server Port Number: 6500
    WebLogic SSL Port Number: 6501
    Web Context Root: ouaf
    WebLogic JNDI User ID: systemjndi
    WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
    CcwlbnXl2b1kMnvE8DD0wfI1Y=)
    WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
    IhRRuQ==
    WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
    IhRRuQ==
    WebLogic Server Name: myserver
    Web Server Application Name: SPLWeb
    Application Admin User ID: appladmin
    Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
    cBz4cubUr2U5BbRl75SY2pP6Q=)
    Expanded Directories: false
    Application Viewer Module: true
    4. Database Configuration
    JDBC Name: oubi-jdbc
    MPL Database User ID: SPLADMV2
    MPL Database Password: ENC(mfG7quacTagw5qEvov
    oaQIRpnogRvroY4NcXp6WZCZo=)
    XAI Database User ID: SPLADMV2
    XAI Database Password: ENC(tNfRJUthvYQR990TzW
    314nXU+5jWBuYBDs5AgT5qG7g=)
    Batch Database User ID: SPLADMV2
    Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
    kFDsgUIjDm5I6TJU5Suz0Wy/k=)
    JDBC Database User ID: SPLADMV2
    JDBC Database Password: {3DES}L43JfrbOrCtupkwm
    4I/Adw==
    Database Name: DEV1
    Database Server: 01HW342889
    Database Port: 1701
    ONS Server Configuration:
    Database Override Connection String:
    Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
    5. General Configuration Options
    Batch RMI Port: 6509
    Batch Mode: CLUSTERED
    Coherence Cluster Name: OUBICLUSTER1
    Coherence Cluster Address: 172.25.138.45
    Coherence Cluster PORT: 6508
    Coherence Cluster Mode: dev
    Each item in the above list should be configured for a successful install.
    Choose option (1,2,3,4,5, <P> Process, <X> Exit): P
    --> Calculating additional variables ... done.
    --> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
    N.INI ... done.
    Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
    utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
    "ERROR - Detected while running install.plx."
    Thks,
    Mohan

    This is a common error people get when configuring Repository Service in Admin Console...
    Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
    Or it could be parameter issues if it is linux...
    Please mark helpful this post

  • Getting error while configuring OIM11gR2 on windows 64 bit machiine

    Hi,
    I am getting below error while configuring OIM 11gR2: INST-6193: The attribute JpsContextName in MBean com.oracle.sdp.messaging:Location=soa_server1, name=ServerConfig, type=SDPMessagingServerConfig,Application=usermessagingserver not found. Check the SOA version comparability.
    My system details are: Windows 7 64 bit
    Installables downloaded from Oracle cloud:
    Oracle WebLogic Server 11gR1 (10.3.6) Generic and Coherence
    Oracle SOA Suite 11g Patch Set 5 (11.1.1.6.0) (Part 1 of 2)
    Oracle SOA Suite 11g Patch Set 5 (11.1.1.6.0) (Part 2 of 2)
    Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.6.0) for Microsoft Windows
    Oracle Identity and Access Management 11g (11.1.2.1.0) (Part 1 of 2)
    Oracle Identity and Access Management 11g (11.1.2.1.0) (Part 2 of 2)
    Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows x64 (64-bit) (Part 1 of 2)
    Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows x64 (64-bit) (Part 2 of 2)
    Please let me know if I have to apply some patches.
    Regards,
    Kalpana

    you might want to look at this:
    Installation and Configuration Issues for Oracle Identity and Access Management - 11g Release 2 (11.1.2.1)

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Error while configuring esb 2.2

    Hi ,
    I have installed Biztalk 2013 which shares the DB server with a Biztalk 2010 installation.
    While configuring ESB2.2 on BizTalk 2013 it gives me a error saying check if SSO service is running.
    The issue is in ESB configuration for SSO it only asks for DB server name and not the SSO db.
    In my cas e the SSO db name is entsso as I my 2013 setup shares the DB server with 2010 setup.
    is there a way to specify which SSOdb on the server is to be used by the ESB config utility.
    Thanks
    Kamal

    Hi Kamal,
    Note that ESB Configuration Tool read SSO information from registy from the value store in
    DataBase and Server in this path 
    SOFTWARE\\Microsoft\\ENTSSO\\SQL
    Make sure that these value compatible with the value when you configure BizTalk and windows service "Enterprise Single Sign On Service" is running as mentioned by IntegrationExpert
    Please remove the duplicate
    thread and
    this
    Thanks

  • ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

    I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5.  I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool".  When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005].  Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges".  However, I did not experience this error with all of the migrated sites.  I traced my steps backward to discover the problem.  I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS.  I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc.  Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine.  In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well. 
    Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting.  Why would this make wsconfig.exe crash?
    Thanks in advance and I hope this saves someone from hours of research and frustration.

    DiscoDelight,
    Have you forwarded this information directly to the ColdFusion product team?  If not, I'll try to draw their attention to it.  Only a few of them are active on these forums, so this issue might be overlooked.
    -Carl V.
    EDIT: I just pinged them on Twitter to take a look at this post.
    EDIT #2: They just pinged me back that they are looking into it.

  • Error while configuring work repository details in topology Manager

    Hi,
    Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
    When i try to do so, am getting the below error while configuring the work repository details in topology manager.
    “A work repository already exists for this connection.
    Enter the repository password to declare it in your Master Repository”
    I tried with both the new master and work repository password. But no luck.
    Previous Master & work details:
    Master: PCS_MASTER
    Work:PCS_WORKREP
    New Details
    Master: PCS_MASTER_INT
    Work:PCS_WORKREP_INT
    Instance: PCBID
    Am trying to create new master repository for PCS_MASTER_INT.

    In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
    If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

Maybe you are looking for

  • Cannot find FaceTime App on iPhone 5/New iPad

    Found out that I did not have FaceTime app on my iPhone 5 or new iPad. Have started reading articles about it.  Need to go thru settings=> general => restrictions and set safari, camera, facetime . all to be "on".  and go thru settings => FaceTime an

  • Documents won't print, although there is no problem with Explorer

    Documents that I try to print from a web page go into the printer queue, but won't actually print (eg a flight ticket or a portfolio summary). The document will print perfectly if I use Explorer.

  • Conversion of Proc Ord in APO

    Hi Gurus, We have a customized logic (special batch numbering) on conversion of planned orders to process orders.  In the ECC side, if we convert planned orders to process orders, this logic is being applied.  But if we convert the planned orders to

  • Can't open Firefox 16.0.2

    Firefox was working just fine until I updated to Firefox 16.0.2 and now can't open the program at all. When I double click on the Firefox icon or click "Open", I get the moving circle for about 10 seconds, then it just goes away and the program does

  • Java API that extracts data form Internet Explorer (when user highlights)

    Hi all, Need advice on "How to extract data from Internet explorer when user highlights a word (or paragraph)"? Sample code will be greatly appreciated. Thanks in advance regards DIlip