OBIEE 11g Installation Fails at configuration process

Hi All,
I tried installing OBIEE 11.1.1.5.0 in my machine.Below are the prerequsite which I followed and the laptop system configuration details.
Pre-Requisites Followed : 1) Creation of Static IP address,2) Created Schema's using RCU In Oracle 11g Database.
Laptop Details : OS-Windows 7,Ram 3 GB and space for Installation nearly 14 GB.
Installation Type: Simple Installation
Issue : There are 14 steps in the wizard.I have succeeded till step 12 which is called "Installation Process",But in Step 13 'Configuration progress' the wizard says Creating Domain status as 'In Progress' which stays in the same status even after 2 hours.So I am not able to complete installation Process as the wizard is not completing the Step 13 process which is 'BI Configuration'. This is the 4 attempt Iam trying the installation and the output is failure in the installation of OBIEE 11g on my machine.
Known Issue : Also when I executed the setup file for running the installation file in 'Drive:\bi_windows_x86_111150_32_disk1_1of2\bishiphome\Disk1\setup.exe',in the command prompt i got a warning message like swap space is 0.But I ignored that error and I gave 'y' to proceed further for the installation.As this swap space issue was common in many of our folk installation process which has ended in successful installation.
Help Needed : Can any one suggest me what will be the cause for the issue,or any Pre-requisite is missing,or the installation steps which I need to follow to make my installation successful.
Thanks in advance,
Regards
Kris

- all installation files must be in a folder without spaces.
Try to decompress all files in c:obi11g for exemple and restart installation.
Or
- You may have a temp directory in the path C:Documents and Settingsuser_nameLocal SettingsTemp. You got the above mentioned exception because of the temp directory path having spaces in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:Documents and Settingsuser_nameLocal SettingsTemp path.
4. Edit the TEMP and TMP variables and mention C:TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
regards
srinivas

Similar Messages

  • OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"

    OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"
    it is the lost step of OBIEE-11g installation and it failed "opmnctl start coreapplication_obips1".appriciate for early reply.
    "opmnctl task failed" Taks executing "opmnctl start coreapplication_obips1" is failed.OBIEE Guru's help urgently.
    Edited by: RAGHAVENDRA HARI N on Sep 11, 2012 5:09 PM

    Hi, check the server logs inside <@yourBIPath>/bifoundation/diagnostics/OBIEEPresentationservicecomponent and OBIEE servercomponent.
    This may sound silly, but are your servers&the nodeman up and running?
    Regards,
    D

  • OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

    Hi,
    I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
    Severe: Element Type:Domain
    Element id: null
    Operation result: failed to obtain domain file lock
    Detail Message: java.util.concurrent.timeoutException.Timeout;
    waiting for lock: Domain config lock;
    c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
    Step Distributing Repository failed
    Configuration Action 'Distributing Repository' has failed. Please check logs for details.
    Step Distributing repository failed
    I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
    I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
    I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
    Here is the snapshot of the log file which I could found.
    INFO: Current Inventory:
      Oracle Home: OraDb11g_home1
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1858390736
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082373
      This Oracle Home has not been changed in this session.
      Oracle Home: OH440082374
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1597391518
      This Oracle Home has not been changed in this session.
      Oracle Home: OH1285215443
      This Oracle Home has not been changed in this session.
    INFO: Ending the inventory Session
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    Can someone please help me with this since I am stuck with for quite some time now.
    Is there any way to check in command prompt to check the locale as required by the system.
    What could be the issue here?
    Thanks,
    Nitin

    Hi all,
    We are able to resolve the above issue with the below solution.
    Root cause of the issue:
    You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
    Solution:
    1. Create a new directory called TEMP in a different location for ex: C:\TEMP
    2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
    3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
    4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
    5. Deinstall and re-install OBIEE 11g.
    Happy OBIEE 11g installation!!
    Thanks,
    Rajesh Gurram

  • OBIEE 11g installation error while configuring (opmnctl error)

    While installing OBIEE 11g (11.1.1.3.0),(32-bit) we have choosen software only install and the software was installed successfully. While configuring in 10 th step we are getting the following errors.
    We have installed webserver before installing OBIEE 11g.
    OS is Windows server 2008
    Executing: opmnctl start coreapplication_obips1 falied and
    Executing: opmnctl start coreapplication_obisch1.
    we are using dynamic IP address

    Thanks, It worked. I unzipped all the folders in a single folder and then with the single Setup.exe it automatically loaded the complete software.
    Best Way - Import all the download file into a single folder and run the .exe
    Thanks,
    Raman

  • OBIEE 11g Installing Failing on Configuring Domain

    Lenovo Thinkpad T400
    Windows XP SP3
    8GB RAM
    250GB
    My installing of OBIEE 11.1.1.6.0 fails on Step 13 of 14 Configuring Domain. I have done the following steps before the installation.
    Installed Microsoft Loopback Adapter
    Set User Environment Variables to C:\TEMP
    Set classpath to C:\Java\jdk1.7.0_05\bin (Made sure there were no spaces)
    My log files reads as follows:
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
         at java.lang.Thread.run(Thread.java:662)
    [2012-08-12T21:55:18.265-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 26] [ecid: 0000J^TsEWp5yW^5xV_AiW1GA5kH00000H,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
         at java.lang.Thread.run(Thread.java:662)

    Hi All,
    Thanks for the response. Turns out I had to remove the underscore (_) from my computer name for the Configuring Domain process to work. Even though this worked, my OBIEE installation still failed at a later stage called PolicyStoreMerge. I have attached the log below.
    C:\OBIHOME\Oracle_BI1\opmn\conf\opmn.xsd
    [2012-08-13T16:50:38.046-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Updating opmn.xml at: C:\OBIHOME\instances\instance1\config\OPMN\opmn\opmn.xml
    [2012-08-13T16:50:38.046-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Snippet:[[
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <ias-component id="@BI_APPLICATION_NAME@_obiccs">
    <environment>
    <variable id="ORACLE_BI_OPMNMANAGED" value="true"/>
    <variable id="ORACLE_BI_APPLICATION" value="coreapplication"/>
    <variable id="ORA_NLS10" value="$ORACLE_HOME/nls/data"/>
    <variable id="PATH" value="$ORACLE_HOME/common/ODBC/Merant/5.3/Drivers$:$ORACLE_HOME/bifoundation/server/bin$:$ORACLE_HOME/bifoundation/web/bin$:$ORACLE_INSTANCE$:$ORACLE_HOME/lib" append="true"/>
    </environment>
    <process-type id="OracleBIClusterControllerComponent" module-id="CUSTOM">
    <module-data>
    <category id="start-parameters">
    <data id="start-executable" value="$ORACLE_HOME/bifoundation/server/bin/nqsclustercontroller.exe"/>
    <data id="no-stdio" value="true"/>
    </category>
    <category id="stop-parameters">
    <data id="stop-executable" value="integrator"/>
    </category>
    <category id="ping-parameters">
    <data id="ping-type" value="integrator"/>
    </category>
    <category id="ready-parameters">
    <data id="use-ping-for-ready" value="true"/>
    </category>
    </module-data>
    <start timeout="600" retry="1"/>
    <stop timeout="120"/>
    <restart timeout="720" retry="1"/>
    <process-set id="BIClusterController" numprocs="1"/>
    </process-type>
    </ias-component>
    [2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.install.bi.util] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.install.bi.util.FilePermissions] [SRC_METHOD: setNormalFilePermissions] Setting Normal permissions on: C:\OBIHOME\instances\instance1\config\OracleBIClusterControllerComponent\coreapplication_obiccs1\component-logs.xml
    [2012-08-13T16:50:38.078-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Post-config component: class oracle.bi.management.agentcore.impl.clustercontroller.BIClusterControllerManager
    [2012-08-13T16:50:38.078-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Recording mbean em property: EMTargetType with value: oracle_bi_cluster_controller
    [2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: onCreate] RETURN
    [2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: registerComponent] Registering coreapplication_obiccs1 component
    [2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: registerComponent] ENTRY
    [2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: connect] Creating connection to hello there weblogic.management.mbeanservers.runtime
    [2012-08-13T16:50:38.093-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.AbstractRuntimeServiceConnection] [SRC_METHOD: invokeMBean] Invoking RegisterMBean operation: registerComponent
    [2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: disconnect] Breaking connection to mbean server
    [2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: registerComponent] RETURN
    [2012-08-13T16:50:38.125-06:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
    [2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: reloadOpmn] ENTRY
    [2012-08-13T16:50:40.484-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: reloadOpmn] Invoking opmn reload...
    [2012-08-13T16:50:56.171-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: reloadOpmn] RETURN
    [2012-08-13T16:50:56.406-06:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Running script C:\OBIHOME\Oracle_BI1\common\bin\wlst.cmd
    [2012-08-13T16:50:56.406-06:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Parameters : [C:\OBIHOME\oracle_common\modules\oracle.jps_11.1.1\common\wlstscripts\migrateSecurityStore.py][-type][policyStore][-configFile][C:\OBIHOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bi-policystoremerge-jpscfg.xml][-src][XMLSourceContext][-dst][XMLDestinationContext]

  • OBIEE 11g installation - OutOfMemoryError: PermGen space

    Hi All
    OBIEE 11g installation fails at configuration step with the following error:
    Creating a new AdminServer Object ...
    AdminServer port is 7001
    Starting the domain ...
    java.lang.OutOfMemoryError: PermGen space
    java.lang.OutOfMemoryError: PermGen space
    We tried to set the set JRE_MEMORY_OPTIONS in oraparam.ini file and ran the config.bat too.
    While running config.bat, the setup is asking for "Scale out BI" and not for creating New domain.
    So we are unable to continue with the installation.
    Has anyone faced this error.
    We are installing on Win7 64 bit machine.
    Thanks
    Edited by: 943911 on Aug 8, 2012 5:17 AM

    increase permgen space like this:
    -XX:PermSize=256m
    -XX:MaxPermSize=256m
    If not try enabling permgen garbage collection with
    -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled

  • OBIEE 11g installation got struck in "Configuration Process"

    Hi
    I am trying to instal OBIEE 11g 11.1.1.5.0 on Win 7 computer on MS Sql server Express.
    Every went smooth with RCU, and OBIEE 11g installation upto step 12.
    Now in Step 13, 'Configuration Process', the installer got struck forever showing:
    BI Configuration -> 0%
    Creating Domain -> In Progress
    and rest of all the items in 'Recommended' status.
    How can I make this move forward?
    I see no activity going on in logs etc. Looks like installer got struck 'creating domain' activity forever.
    Thanks for any inputs.

    Please find the error messages from log: Thanks for any inputs.
    Creating a new AdminServer Object ...
    AdminServer port is 7001
    Starting the domain ...
    LOADING DLL : C:\obiee\obieemiddlewarehome\Oracle_BI1\install\config\\StartUtil64.dll
    DEBUG : Loading DLL : C:\obiee\obieemiddlewarehome\Oracle_BI1\install\config\\StartUtil64.dll
    DEBUG : Loaded DLL : C:\obiee\obieemiddlewarehome\Oracle_BI1\install\config\\StartUtil64.dll
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    An error occurred while starting the domain.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3179)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
         ... 19 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 14 more
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 14 more

  • OBIEE 11g installation over Oracle Express (XE)

    During OBIEE 11g installation we are required to cofigure connection string to DB.
    We installled Oracle Express (XE) on the same machine with default settings.
    What should be the connection string in the DB details form?
    Whether and if so, how should we configure the service in XE?

    localhost:port_used:db_service_name
    Port is usually 1521. DB Service name is the DB name that you assigned to your DB.

  • About OBIEE 11g Installation

    Hello all
    I want to install a OBIEE 11g i hv a question that does it require any dotnet framework??
    Edited by: 916405 on 25-Apr-2012 00:01
    Also i hv a question that RCU utility requires only if we hv 32 bit version or does it needs in 64 bit version also.
    Edited by: 916405 on 25-Apr-2012 00:09

    Hi,
    dotnet framework not required for obiee11g version
    for the RCU, its required fro obiee11g installation purpose so its nessasary for 32/64 bit.
    http://123obi.com/2011/01/obiee-11g-installation-on-windows7-64-bits-part1/
    http://gerardnico.com/wiki/dat/obiee/installation_11.1
    http://obieeelegant.blogspot.com/2012/03/obiee-111160-installation-on-windows-7.html
    http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
    thanks
    Deva

  • Error when trying to run the rcu.bat file as part of OBIEE 11g installation

    when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
    "windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
    Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
    Thanks
    Manoj

    after setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
    please help me finding a solution to this error....
    and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
    can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
    thanks
    Manoj
    Edited by: mkumar on Jun 2, 2011 3:47 AM

  • OBIEE 11g install failed on Windows 7 - 64 bit

    I am trying to install OBIEE 11g in my Windows 7 - 64 bit laptop.
    It is failing during configuration at the step
    Starting Managed Server: bi_server1
    The log file is showing following error ....
    Starting Managed Server : bi_server1
    In public start
    ASWLServer.start ...
    LOADING DLL : C:\FusionMW\Oracle_BI1\install\config\\StartUtil64.dll
    getDomainRuntimeMBeanServerConnection ...
    Connecting to Domain runtime ...
    trying to connect to vikas-PC 7001
    Successfully connected to the Domain Runtime ...
    getDomainRuntimeMBeanServerConnection ...
    Connecting to Domain runtime ...
    trying to connect to vikas-PC 7001
    Successfully connected to the Domain Runtime ...
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
         at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:56)
         at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
         at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
         at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
         at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:815)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:484)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 14 more
    Please help
    Thanks in advance,
    Vikas Agarwal

    Greetings Vikas.
    Dou you solve this issue?
    I got the exact same message but setting the second node of a Forms 11.1.2.1 Installation. But the message I got is the same that you have:
    Successfully connected to the Domain Runtime ...
    oracle.as.provisioning.exception.ASProvisioningException
      at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
      at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
      at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
      at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
      at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
      at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
      at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
      at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
      at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
      at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
      at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
      at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
      at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
      at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
      at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
      at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:814)
      at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
      at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
      ... 13 more

  • OBIEE 11g installation stuck at step 12 of 14 (0% copying files...)

    Hi All,
    I am installing OBIEE 11g on Windows7 32Bit OS.
    I have done with all the steps till step 11 without any error. However, ASA it starts the step 12 (i.e. Configuring WebLogic- Copying files...), installation stuck at 0% and do not continue. I waited for 8-10 Hrs but it never started copying files.
    Also, I tried the installation numerous times, but every time I got the same problem.
    I verified the logs as well, but there was no error.
    Please help me to resolve the issue.
    Regards,
    Ashish

    Yes, I got an idea, install OBIEE in a supported platform as your it's not supported at the moment:
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

  • Prerequisite checking issue during obiee 11g installation in windows server 2012

    HI..
    Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
    can someone provide help to solve this issue..
    Thanks,

    HI..
    Currently i'm facing problem while installing obiee 11g(11.1.1.7.0) in windows server 2012 and the database we're using is ms sql server 10.3 version. During the prerequisite checks while installation it shows the error "Checking Operating system certification" status "failed"..
    can someone provide help to solve this issue..
    Thanks,

  • OBIEE 11g installation error

    Hi I am getting below error while installing OBIEE 11g ...
    INST-07286: Specified Oracle Middleware home location does not have minimum version 10.3.5.0 of WebLogic server. If the version is incorrect then configuring with the Weblogic server will fail.
    I believe Weblogic comes with it.any one tried this out.

    Thanks, It worked. I unzipped all the folders in a single folder and then with the single Setup.exe it automatically loaded the complete software.
    Best Way - Import all the download file into a single folder and run the .exe
    Thanks,
    Raman

  • RAC 11g Installation Failing, saying "$GRID_HOME/bin/crsctl : No such file or directory"

    Hi All,
       I've the below mentioned problem.
    Some time ago, I installed Oracle 11g RAC. As this installation failed, I removed both Grid Home and Database Home using "rm", rather than deinstalling as deinstall failed while running. Now, when I do a fresh install of Oracle 11g RAC, I get the below response while running $GRID_HOME/root.sh:
    [code]
    [root@racnode2 oracle]# /u02/app/11.2.0/grid/root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
        ORACLE_OWNER= grid
        ORACLE_HOME=  /u02/app/11.2.0/grid
    Enter the full pathname of the local bin directory: [/usr/local/bin]:
    The file "dbhome" already exists in /usr/local/bin.  Overwrite it? (y/n)
    [n]: y
       Copying dbhome to /usr/local/bin ...
    The file "oraenv" already exists in /usr/local/bin.  Overwrite it? (y/n)
    [n]: y
       Copying oraenv to /usr/local/bin ...
    The file "coraenv" already exists in /usr/local/bin.  Overwrite it? (y/n)
    [n]: y
       Copying coraenv to /usr/local/bin ...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    2013-08-28 00:15:36: Parsing the host name
    2013-08-28 00:15:36: Checking for super user privileges
    2013-08-28 00:15:36: User has super user privileges
    Using configuration parameter file: /u02/app/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    Improper Oracle Clusterware configuration found on this host
    Deconfigure the existing cluster configuration before starting
    to configure a new Clusterware
    run '/u02/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig'
    to configure existing failed configuration and then rerun root.sh
    [code]
    I ran "/u02/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig", But, I get the below errors:
    [code]
    [root@racnode2 oracle]# /u02/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig
    2013-08-28 00:17:19: Parsing the host name
    2013-08-28 00:17:19: Checking for super user privileges
    2013-08-28 00:17:19: User has super user privileges
    Using configuration parameter file: /u02/app/11.2.0/grid/crs/install/crsconfig_params
    Failure to execute: No such file or directory for command /u02/app/11.2.0/grid/bin/crsctl check cluster -n racnode2
    Failure to execute: No such file or directory for command /u02/app/11.2.0/grid/bin/crsctl check cluster -n racnode2
    Oracle Clusterware stack is not active on this node
    Restart the clusterware stack (use /u02/app/11.2.0/grid/bin/crsctl start crs) and retry
    Failed to verify resources
    [root@racnode2 oracle]# /u02/app/11.2.0/grid/bin/crsctl start crs
    -bash: /u02/app/11.2.0/grid/bin/crsctl: No such file or directory
    [code]
    In fact, there are no "crsctl" under GRID_HOME/bin.
    OS : Linux
    Can someone help. I am willing to provide any information.
    Thanks,

    Hi Pradeep,
       Your suggestion helped immensely. I removed all the oracle related files and directories from /etc/oracle, removed entry in /etc/inittab and removed links to startup/kill scripts from /etc/rc.d/*.
    I've added below steps I followed so it may be helpful:
    1. Removed these directory lastgasp,  oprocd,  scls_scr from /etc/oracle
    2. removed ocr.loc.orig, olr.loc, olr.loc.orig from /etc/oracle
    3. Removed the entry h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null from /etc/inittab
    4. Removed K19ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc0.d
    5. Removed K19ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc1.d
    6. Removed K19ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc2.d
    7. Removed S96ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc3.d
    8. Removed K19ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc4.d
    9. Removed S96ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc5.d
    10. Removed K19ohasd -> /etc/init.d/ohasd from /etc/rc.d/rc6.d
    Then, Grid installation was started, and root.sh went well. The Grid Infrastructure was installed successfully on both the nodes.
    This has been performed on all nodes in the cluster. In fact, I had only 2 nodes in the cluster.
    Thanks again,

Maybe you are looking for

  • Using Calendar Picker (Dashboard Prompt) variable in report filter

    Hi All, I have checked the forum and it doesn't look like this was answered. I have a presentation variable "CalendarDate" for a dashboard prompt that uses the calendar picker. Has anyone found an easy way to use the presentation variable in a report

  • How to overcome looping problem in Table control?

    If the table control displays,say for eg 5 rows in the screen,it is looping the same in flow logic. What if the table control has 10 rows but only 5 rows are displayed? and i want to loop through all the records in the flow logic. how to overcome thi

  • Exception in thread "main" java.lang.NoClassDefFoundError: server Caused by

    I get this error when running a batch file Exception in thread "main" java.lang.NoClassDefFoundError: serverCaused by: java.lang.ClassNotFoundException: server at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivi

  • [Solved] Remote X over ssh not working

    Hello, I'm trying to forward X11 over ssh but it's not working. I type ssh -X 192.168.1.101 followed by my password, and I log in just fine. I try to launch an X11 application and I get $kate kate: cannot connect to X server SSH is supposed to be for

  • Can't find BBM Icon after upgrade on Torch 9850

    Hello all I did an upgrade to my Torch this morning per a message to upgrade the BBM this morning and all looked like it went well and I restarted the device and NO BBM ICON.. Can anyone help me?  I tried unhide, etc and I can't find it. I tried to r