OBIEE 11g Installing Failing on Configuring Domain
Lenovo Thinkpad T400
Windows XP SP3
8GB RAM
250GB
My installing of OBIEE 11.1.1.6.0 fails on Step 13 of 14 Configuring Domain. I have done the following steps before the installation.
Installed Microsoft Loopback Adapter
Set User Environment Variables to C:\TEMP
Set classpath to C:\Java\jdk1.7.0_05\bin (Made sure there were no spaces)
My log files reads as follows:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2012-08-12T21:55:18.265-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 26] [ecid: 0000J^TsEWp5yW^5xV_AiW1GA5kH00000H,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Hi All,
Thanks for the response. Turns out I had to remove the underscore (_) from my computer name for the Configuring Domain process to work. Even though this worked, my OBIEE installation still failed at a later stage called PolicyStoreMerge. I have attached the log below.
C:\OBIHOME\Oracle_BI1\opmn\conf\opmn.xsd
[2012-08-13T16:50:38.046-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Updating opmn.xml at: C:\OBIHOME\instances\instance1\config\OPMN\opmn\opmn.xml
[2012-08-13T16:50:38.046-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Snippet:[[
<?xml version = '1.0' encoding = 'UTF-8'?>
<ias-component id="@BI_APPLICATION_NAME@_obiccs">
<environment>
<variable id="ORACLE_BI_OPMNMANAGED" value="true"/>
<variable id="ORACLE_BI_APPLICATION" value="coreapplication"/>
<variable id="ORA_NLS10" value="$ORACLE_HOME/nls/data"/>
<variable id="PATH" value="$ORACLE_HOME/common/ODBC/Merant/5.3/Drivers$:$ORACLE_HOME/bifoundation/server/bin$:$ORACLE_HOME/bifoundation/web/bin$:$ORACLE_INSTANCE$:$ORACLE_HOME/lib" append="true"/>
</environment>
<process-type id="OracleBIClusterControllerComponent" module-id="CUSTOM">
<module-data>
<category id="start-parameters">
<data id="start-executable" value="$ORACLE_HOME/bifoundation/server/bin/nqsclustercontroller.exe"/>
<data id="no-stdio" value="true"/>
</category>
<category id="stop-parameters">
<data id="stop-executable" value="integrator"/>
</category>
<category id="ping-parameters">
<data id="ping-type" value="integrator"/>
</category>
<category id="ready-parameters">
<data id="use-ping-for-ready" value="true"/>
</category>
</module-data>
<start timeout="600" retry="1"/>
<stop timeout="120"/>
<restart timeout="720" retry="1"/>
<process-set id="BIClusterController" numprocs="1"/>
</process-type>
</ias-component>
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.install.bi.util] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.install.bi.util.FilePermissions] [SRC_METHOD: setNormalFilePermissions] Setting Normal permissions on: C:\OBIHOME\instances\instance1\config\OracleBIClusterControllerComponent\coreapplication_obiccs1\component-logs.xml
[2012-08-13T16:50:38.078-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Post-config component: class oracle.bi.management.agentcore.impl.clustercontroller.BIClusterControllerManager
[2012-08-13T16:50:38.078-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Recording mbean em property: EMTargetType with value: oracle_bi_cluster_controller
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: onCreate] RETURN
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: registerComponent] Registering coreapplication_obiccs1 component
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: registerComponent] ENTRY
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: connect] Creating connection to hello there weblogic.management.mbeanservers.runtime
[2012-08-13T16:50:38.093-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.AbstractRuntimeServiceConnection] [SRC_METHOD: invokeMBean] Invoking RegisterMBean operation: registerComponent
[2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: disconnect] Breaking connection to mbean server
[2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: registerComponent] RETURN
[2012-08-13T16:50:38.125-06:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: reloadOpmn] ENTRY
[2012-08-13T16:50:40.484-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: reloadOpmn] Invoking opmn reload...
[2012-08-13T16:50:56.171-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: reloadOpmn] RETURN
[2012-08-13T16:50:56.406-06:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Running script C:\OBIHOME\Oracle_BI1\common\bin\wlst.cmd
[2012-08-13T16:50:56.406-06:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Parameters : [C:\OBIHOME\oracle_common\modules\oracle.jps_11.1.1\common\wlstscripts\migrateSecurityStore.py][-type][policyStore][-configFile][C:\OBIHOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bi-policystoremerge-jpscfg.xml][-src][XMLSourceContext][-dst][XMLDestinationContext]
Similar Messages
-
OBIEE 11g install failed on Windows 7 - 64 bit
I am trying to install OBIEE 11g in my Windows 7 - 64 bit laptop.
It is failing during configuration at the step
Starting Managed Server: bi_server1
The log file is showing following error ....
Starting Managed Server : bi_server1
In public start
ASWLServer.start ...
LOADING DLL : C:\FusionMW\Oracle_BI1\install\config\\StartUtil64.dll
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to vikas-PC 7001
Successfully connected to the Domain Runtime ...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to vikas-PC 7001
Successfully connected to the Domain Runtime ...
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:56)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:815)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:484)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Please help
Thanks in advance,
Vikas AgarwalGreetings Vikas.
Dou you solve this issue?
I got the exact same message but setting the second node of a Forms 11.1.2.1 Installation. But the message I got is the same that you have:
Successfully connected to the Domain Runtime ...
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:814)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more -
OBIEE 11g Installation Fails at configuration process
Hi All,
I tried installing OBIEE 11.1.1.5.0 in my machine.Below are the prerequsite which I followed and the laptop system configuration details.
Pre-Requisites Followed : 1) Creation of Static IP address,2) Created Schema's using RCU In Oracle 11g Database.
Laptop Details : OS-Windows 7,Ram 3 GB and space for Installation nearly 14 GB.
Installation Type: Simple Installation
Issue : There are 14 steps in the wizard.I have succeeded till step 12 which is called "Installation Process",But in Step 13 'Configuration progress' the wizard says Creating Domain status as 'In Progress' which stays in the same status even after 2 hours.So I am not able to complete installation Process as the wizard is not completing the Step 13 process which is 'BI Configuration'. This is the 4 attempt Iam trying the installation and the output is failure in the installation of OBIEE 11g on my machine.
Known Issue : Also when I executed the setup file for running the installation file in 'Drive:\bi_windows_x86_111150_32_disk1_1of2\bishiphome\Disk1\setup.exe',in the command prompt i got a warning message like swap space is 0.But I ignored that error and I gave 'y' to proceed further for the installation.As this swap space issue was common in many of our folk installation process which has ended in successful installation.
Help Needed : Can any one suggest me what will be the cause for the issue,or any Pre-requisite is missing,or the installation steps which I need to follow to make my installation successful.
Thanks in advance,
Regards
Kris- all installation files must be in a folder without spaces.
Try to decompress all files in c:obi11g for exemple and restart installation.
Or
- You may have a temp directory in the path C:Documents and Settingsuser_nameLocal SettingsTemp. You got the above mentioned exception because of the temp directory path having spaces in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:Documents and Settingsuser_nameLocal SettingsTemp path.
4. Edit the TEMP and TMP variables and mention C:TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
regards
srinivas -
OBIEE 11g install fails on step 7 (database connect string)
I've currently spent 2 days trying to install OBIEE 11g on two machines (independently). This first is a Windows XP SP3 test PC running 4GB RAM, whilst the second is a Windows 2003 virtual server with 3GB RAM. The Database is Oracle 10g (10.2.0.4.0) on AIX 5.3.
The DBA has successfully run the RCU on the Database and the schemas needed for OBIEE have been created. The BIPLATFORM schema has also been granted DBA privileges.
Now I've tried to run both the simple and the Enterprise install for OBIEE 11g, but it always fails at the same step (step 7 of 13: Database details). I have selected the following:
Database Type: Oracle Database
Connect String: hostname:port:instance, where hostname is the full server path eg xxxxx.uk.com and instance name is FFADEV01
BIPLATFORM Schema Username: As per username defined in RCU
BIPLATFORM Schema Password: As per password entered in RCU
If i change the connection string to FFADEV01.WORLD i get a 08031 error, whereas I am normally getting an 08035 error. The annoying thing is that I can connect to the schema using RapidSQL and the usernames and passwords as created in the RCU.
Any help greatly appreciated. ThanksHow was he able to install the BIPlATFORM schema using RCU on AIX? I thought RCU was only on Linux and Window platforms? I am about to install OBIEE 11.1.1.5 on AIX with a Oracle 10g DB but from what I read I wont be able to create the needed OBIEE schemas for the install because I won't be able to use the RCU on AIX. Any help would be appreciated.
Thanks.
Ryan -
OBIEE 11g installing in Linux. domain creation error
Hi,
OBIEE 11g installing in Linux server now. domain creation is in progress for about an hour and in log I can see below error.
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
domain creation is still running and looks like it is struck to start domain no idea how to solve the issue. waiting to see whether domain creation successful.
Please let me know how to fix this issue.
Thanks
Jay.Hi,
Have you try to increase MaxPermSize, it may occure memory issue.
change the Middleware/ORACLE_BI1/oui/oraparam.ini and fine it like below
JRE_MEMORY_OPTIONS=" -mx512m -XX:MaxPermSize=512m" then try to change it
JRE_MEMORY_OPTIONS=" -mx2048m -XX:MaxPermSize=2048m"
(i.e:It will increase the numbers for allocating more memory) then save it and then try to run config.bat (software only/enterprise) method and configure it.
Thanks
Deva -
Failed to Configured Domain Services for Windows
Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmoThanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup. -
OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"
OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"
it is the lost step of OBIEE-11g installation and it failed "opmnctl start coreapplication_obips1".appriciate for early reply.
"opmnctl task failed" Taks executing "opmnctl start coreapplication_obips1" is failed.OBIEE Guru's help urgently.
Edited by: RAGHAVENDRA HARI N on Sep 11, 2012 5:09 PMHi, check the server logs inside <@yourBIPath>/bifoundation/diagnostics/OBIEEPresentationservicecomponent and OBIEE servercomponent.
This may sound silly, but are your servers&the nodeman up and running?
Regards,
D -
OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step
Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
NitinHi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram -
Hi,
I am trying to install OBIEE 11g on Windows XP with 4 GIG of ram and during Configuration it is failing at "Creating ASInstance" If I continue to configure then it also failed at " Executing: opmnctl start"
The log file has the following information
INFO: PATH = C:\app\akhan\product\11.1.0\db_2\bin;C:\OracleBI\server\Bin;C:\OracleBI\web\bin;C:\OracleBI\web\catalogmanager;
C:\OracleBI\SQLAnywhere;C:\Program Files\Java\jdk1.6.0_20\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;
C:\Program Files\Intel\WiFi\bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\Google\Google Apps Sync\;
C:\Program Files\QuickTime\QTSystem\;C:\app\akhan\rcuHome\bin;c:\Middleware\Oracle_BI1\bin;c:\Middleware\Oracle_BI1\opmn\bin;
c:\Middleware\Oracle_BI1\opmn\lib;c:\Middleware\Oracle_BI1\perl\bin
INFO: CLASSPATH = .;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
INFO: Username:akhan
INFO: Saving the install inventory which has the access of 1
INFO: The flags set for this home (C:\app\akhan\product\11.1.0\db_2) are:clean
INFO: Home:C:\app\akhan\product\11.1.0\db_2 oraclehomeproperties.xml is not saved because the flags indicate no changes to this file.
INFO: The flags set for this home (C:\Middleware\oracle_common) are:aruID|aruDesc|guid|additionalOHProps
INFO: The flags set for this home (C:\Middleware2\oracle_common) are:clean
INFO: Home:C:\Middleware2\oracle_common oraclehomeproperties.xml is not saved because the flags indicate no changes to this file.
INFO: The flags set for this home (c:\Middleware\Oracle_BI1) are:aruID|aruDesc|guid|addedToCI|additionalOHProps
INFO: Updating XML inventory.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1023793388
This Oracle Home has not been changed in this session.
Oracle Home: OH1494677506
This Oracle Home has not been changed in this session.
Oracle Home: OH1929386081
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can you please tell me how to fix this problem.
Thanks
AsgharHi everyone,
I'm having the same problem on my OBIEE 11g installation on windows 2003 Server SP2 but on the step "Restarting AdminServer"
the log file has the following info:
INFO: Variables de entorno:
INFO: ORACLE_HOME =
INFO: PATH = C:\app\Administrator\product\11.1.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\OBI11\Oracle_BI1\bin;C:\OBI11\Oracle_BI1\opmn\bin;C:\OBI11\Oracle_BI1\opmn\lib;C:\OBI11\Oracle_BI1\perl\bin
INFO: CLASSPATH =
INFO: Nombre de Usuario:Administrator
INFO: Saving the install inventory which has the access of 1
INFO: The flags set for this home (C:\app\Administrator\product\11.1.0\db_1) are:clean
INFO: Home:C:\app\Administrator\product\11.1.0\db_1 oraclehomeproperties.xml is not saved because the flags indicate no changes to this file.
INFO: The flags set for this home (C:\OBI11\oracle_common) are:aruID|aruDesc|guid|addedToCI|additionalOHProps
INFO: The flags set for this home (C:\OBI11\Oracle_BI1) are:aruID|aruDesc|guid|addedToCI|additionalOHProps
INFO: The flags set for this home (C:\oracle\product\10.2.0\db_1) are:clean
INFO: Home:C:\oracle\product\10.2.0\db_1 oraclehomeproperties.xml is not saved because the flags indicate no changes to this file.
INFO: Updating XML inventory.
INFO: Inventario Actual:
Directorio Raíz de Oracle: OraDb11g_home1
En esta sesión no se ha cambiado este Directorio Raíz de Oracle
Directorio Raíz de Oracle: OH1650365751
En esta sesión no se ha cambiado este Directorio Raíz de Oracle
Directorio Raíz de Oracle: OH1829599436
En esta sesión no se ha cambiado este Directorio Raíz de Oracle
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Do I have to reinstall everything again?
Thanks
Carlos Hernandez -
OIM 11g installation failed: Error Restart domain step failed
Hi,
I'm stuck in OIM installation at the following point. Please help.
Here is the description of error:
Bootstrap Domain Configuration
Log
Config Action Bootstrap Domain Configuration started
Create Domain
Log
Create Domain
Step Create Domain started
Create Domain
Step Create Domain ended successfully
Create ODS Managed Server
Log
Create ODS Managed Server
Step Create ODS Managed Server started
Create ODS Managed Server
Step Create ODS Managed Server ended successfully
Create OIF Managed Server
Log
Step Create OIF Managed Server started
Step Create OIF Managed Server ended successfully
Stop Managed Server
Log
Stop Managed Server
Step Stop Managed Server started
Stop Managed Server
Step Stop Managed Server ended successfully
Apply Java Required Files
Log
Step Apply Java Required Files started
Step Apply Java Required Files ended successfully
Apply EM Template
Log
Step Apply EM Template started
Step Apply EM Template ended successfully
Restart Domain
Error
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Restart Domain failed
Log
Step Restart Domain started
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Restart Domain failed
Following is the description from the log file: C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-15_02-17-54AM.log
[2012-06-15T04:21:41.828-07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JVjWcgOFs1WFLz7U8A1FqjrQ00000A,0]
[2012-06-15T04:21:41.828-07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JVjWcgOFs1WFLz7U8A1FqjrQ00000A,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:830)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:1105)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Thanks in advance for help.
Thanks,
Prasad ShindeYour problem sounds somewhat like mine, although not exactly. In my case it seems as if my CD/DVD drive didn't like the hologram on my Windows XP install CD. I solved this by using Disk Utility to make a disk image of the Windows DVD and then burning the disk image onto a new DVD with an opaque "label". That solved that problem.
A further problem occurred after that. When I got to the screen that told me to hit "Enter" to start the installation process my keyboard was unresponsive. I solved this by buying a cheap Windows keyboard. That solved that problem and I now have Windows XP running just fine.
I think that you'll find that Apple tech support isn't very responsive to these sort of problems. I don't have Apple Care but was willing to pay my $49 for tech support. I ended up talking to a "Boot Camp specialist". He was polite but told me that it was "a windows problem" and that Apple didn't support Windows. I agree that Apple can't support windows but it seemed like my two problems were "Mac problems". Anyway, after tearing my hair out for 4 days I finally got it done. I have to admit that I'm not happy with apple tech support. -
OBIEE 11g installation error while configuring (opmnctl error)
While installing OBIEE 11g (11.1.1.3.0),(32-bit) we have choosen software only install and the software was installed successfully. While configuring in 10 th step we are getting the following errors.
We have installed webserver before installing OBIEE 11g.
OS is Windows server 2008
Executing: opmnctl start coreapplication_obips1 falied and
Executing: opmnctl start coreapplication_obisch1.
we are using dynamic IP addressThanks, It worked. I unzipped all the folders in a single folder and then with the single Setup.exe it automatically loaded the complete software.
Best Way - Import all the download file into a single folder and run the .exe
Thanks,
Raman -
OBIEE 11g install - is C drive the only drive that will work?
Anyone know if the installation needs to be done on the C drive only . i tried to specify the middleware home on the d drive and got stuck with an error at 98%
Invalid weblogic home specified: D:\app\OBIEE11g\wlserver_10.3
I havent encountered this when installing on the C drive . Oracle's documentation does not specify this requrement . does anyone know if this is a requirement? Any tips on a clean uninstall for the OBIEE 11g server ?Hi Team,
While installing OBIEE11g with database 11g the installation getting successful at 98% and Post installation steps are executing and getting hanged.
after verifing the log the below message came across.
pls. suggest how to resolve this error.
[2010-10-06T17:18:13.558+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Ii1FPUX1ZbS_UDk3yc1Cf5UQ000006,0] Validating node manager service arguments...
[2010-10-06T17:18:13.558+05:30] [as] [ERROR] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Ii1FPUX1ZbS_UDk3yc1Cf5UQ000006,0] Invalid weblogic home specified: D:\OBIEE11g\wlserver_10.3
[2010-10-06T17:18:13.558+05:30] [as] [ERROR] [] [oracle.as.install.engine.modules.install] [tid: 15] [ecid: 0000Ii1FPUX1ZbS_UDk3yc1Cf5UQ000006,0] Error occurred during OUI launch[[
java.lang.IllegalStateException: Invalid weblogic home specified: D:\OBIEE11g\wlserver_10.3
at oracle.as.install.bi.installaction.NodeManagerService._validate(NodeManagerService.java:64)
at oracle.as.install.bi.installaction.NodeManagerService.install(NodeManagerService.java:32)
at oracle.as.install.bi.installaction.BIInstallAction._installNodeManagerService(BIInstallAction.java:459)
at oracle.as.install.bi.installaction.BIInstallAction.executeAfterCopy(BIInstallAction.java:216)
at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteAfterCopy(InstallActionProviderUtility.java:91)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.executeEvent(ModifiedDWizard.java:2907)
at oracle.as.install.engine.modules.presentation.PresentationModule.processModuleEvent(PresentationModule.java:655)
at oracle.as.install.engine.modules.util.PartnerModuleImpl.processEvent(PartnerModuleImpl.java:118)
at oracle.as.install.engine.InstallEngine.notifyListeners(InstallEngine.java:626)
at oracle.as.install.engine.InstallEngine.processEvent(InstallEngine.java:584)
at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyAllEventListenersHelper(PartnerModuleImpl.java:227)
at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyListeners(PartnerModuleImpl.java:158)
at oracle.as.install.engine.modules.install.InstallModule.onSuccess(InstallModule.java:478)
at oracle.as.install.engine.modules.install.action.InstallManager.notifySuccess(InstallManager.java:321)
at oracle.as.install.engine.modules.install.command.InstallSuccessCommand.execute(InstallSuccessCommand.java:42)
at oracle.as.install.engine.modules.install.action.InstallManager.onInstallEvent(InstallManager.java:333)
at oracle.as.install.engine.modules.install.action.AbstractOUIHandler.fireInstallEvent(AbstractOUIHandler.java:145)
at oracle.as.install.engine.modules.install.action.OUIInstaller.succeed(OUIInstaller.java:524)
at oracle.as.install.engine.modules.install.action.OUIInstaller.start(OUIInstaller.java:469)
at oracle.as.install.engine.modules.install.action.InstallManager.launchOUI(InstallManager.java:211)
at oracle.as.install.engine.modules.install.InstallModule.launchOUI(InstallModule.java:155)
at oracle.as.install.engine.modules.install.InstallModule$1.run(InstallModule.java:246)
pls. let me know how to resolve this issue...
Thanks in advance
Regards,
VSR -
Other user can't access to OBIEE 11G installed on a server
Hello,
We have installed OBIEE 11G on a server ( windows sever 2008 r2) with admin account, and it works fine, But others users can't access to obiee 11g ( administration icons are white in their sessions) even they have admin rights.
Can anyone tell me what should we do??
Thank you.Hi,
This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN = ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
ab.bc.xy.zx =
(DESCRIPTION =
#(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
#(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = cap2)
thanks,
BK. -
SolMan 4.0 Install fails at Configure System Landscape Directory
Hi
We are installing Solution Manager 4.0 on AIX 5.2 and DB2 8.2.4. At step 56 (Configure System Landscape Directory phase) the install fails with the following error:
TYPE=A<BR>STATE=503<BR>INFO_SHORT=Error connecting to
http://sapibm7:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SLDConfig;IMPORT_SLD_CONTENT;FILENAME=/usr/sap/SOL/SYS/global/sld/model/CR_Content.zip,HOST=sapibm7,PORT=50100,SLDUSER=J2EE_ADMIN,SLDPASSWORD=des19(92|18|146|163|51|195|178|104|235|). The provided user data might be incorrect or user might be locked. <BR>CONFIGURATION=
The user J2EE_ADMIN can logon to via the gui to client 001 without errors.
Any help would be appreciated.
Thanks
SamHi Sam,
Seems this is a typical problem with SAP J2EE /AddIn Installations (I had this often!!). The user is created in the J2EE user store but because his password is initial, the J2EE engine would not let him in. As I remember the installation tries to log on with user SLDDSUSER (or so, something with SLD...), so log on on to the J2EE Engine with this user (e.g http://<hostname>:<port>/useradmin) and you will be prompted to that your password is initial (also do this with user J2EE_ADMIN, always good idea to see that J2EE Engine works correctly). In most cases the configuration of the SLD will continue.
If this doesn't work, cancel the installation and configure the SLD manually (is no problem, because at that point of the installation procedure, the system is fully installed, except the SLD configuration).
Hopes this helps.
Regards
Daniel -
Trying to install XE 11g Express on Windows XP
Install appears to go OK, directories are created.. gets to configuring DB and it just hangs.
When I look in C:\oraclexe\app\oracle\oradata\XE no database files have been created.
The log file C:\oraclexe\app\oracle\product\11.2.0\server\log\cnksf28487\client\cls.log has the following
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2012-01-18 16:30:37.803: [ default][5392]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][5392]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
Any ideas >Good you got it going!
908859 wrote:
Un-installed XE. Checked disk space - down to 4.5Gb. Cleared out c: drive now 12.5GB free. Re-installed cleanOne of my installs says 4,6 GB used currently, but it has been running for some months now.
Don't remember if the choice existed in XP even, but is the volume FAT or NTFS?
Edited by: orafad on Jan 18, 2012 10:17 PM
Maybe you are looking for
-
Cannot delete photos from iPod nano 3G
My brother, a windozer, has last week bought a iPod Nano. He was playing around a bit and loaded, he don't remember how, some photos on the Nano. He is now desperately trying to remove these photos from his nano. I suggested him to define one folder
-
Hello everyone I just purchased a brand new mac and I am trying to install windows 8 pro using bootcamp assistant. I get through almost the entire install when i get an error message that says "installation cannot proceed files missing" something lik
-
Connecting sb2 audigy zs (not platinum or pro) digital output to logitech z-5500 speak
anyone ever try to use the digital out port on the sound card to connect to a set of speakers that had a coxial input? i have a theory on buying a digital cable and go to radio shack and buy a mono plug.. but will that work? is that compatible? thank
-
MIRO - Message Trigerring at Header and Item Level..
Hi Gurus - In MIRO the message INVS is triggering at both the header and the item level when creating the invoice. We want the output only at the header level. How do we get the output only at the header level? Please provide your valuable solutions.
-
Pages Image Quality Degrades When Dropped from Desktop or Inserted
I'm having a problem with image degradation when dropping an image from my desktop into Pages. Even though it's a large file, the quality and resolution is obviously reduced when it's dropped into Pages. I can view the file on Preview and in Pages si