OBIEE 11g migration issues...

Hi Experts,
I have installed the OBIEE 11g and tried out the SimpleLite repository and catalog which is available along with the installation. That was working fine. and also I was be able to create/edit the analysis. I could be able to access admin presentation page using the user "weblogic". "weblogic" user is belonging to "BIAdministrators" system role and "BIAdminstrator" Application role.
After that i have migrated one of my OBIEE 10g local project to 11g. After the migration i couldn't be able to access the admin page. I am getting authorization issue. Not only that i cannot also be able to create analysis too. Still the weblogic belongs to BIAdministator" user. Did i miss any step ?
Apart from that in that case i couldn't be able to update the repository row count when i open the repository in online mode. I am getting "Connection has failed" message when i try that. I have verified the ODBC connection was fine before try out that.
No my question is OBIEE 11 g migration has issue? or do we need to create the project from the scratch?
You guidelines are much appreciated.
Thank you

Hi User,
I have same problem, can you help me..
Thanks,
Balaa...

Similar Messages

11g migration issues

I'm not sure if this forum is the right place to post 11g migration issues? If not, maybe someone can let me know where to do that. According to the article (http://www.oracle.com/technology/products/jdev/collateral/migration.html) which describes the manual changes you'll need to make after migrating a 10.1.3.4 app to an 11g (11.1.1.1.0 in my case), 'In this release, the migration wizard automates substituting references to adfFacesContext by the Trinidad equivalent requestContext in pages and page definitions...' I have found that this isn't necessarily the case. For example, in one of my pageDefs, the following reference was not changed to requestContext - RefreshCondition="#{!adfFacesContext.postback}". Also, I still see references to adfFacesContext in some of my jspx's as well. Just wanted to let someone know.

Update: Not only does the migration process not replace 'adfFacesContext' with 'requestContext' in pageDefs and jspx's, but when I do a search on 'adfFacesContext' so that I can locate all references that need to be replaced manually, the search comes back with 0 hits, when I know there are many. So, apparently the search mechanism is broken too.

Obiee 11g upgrade issue for date format

Hi,
I am facing a date format issue with obiee 11g report. This statement cast(cast(current_date as char) as timestamp) is failing with "not a valid month" error in obiee 11g. This worked fine with obiee 10g.
I am basically trying to set the date to 12:00:00 am of the sysdate. Below is what I am trying to achieve:
timestampadd(sql_tsi_hour, 1, cast(cast(current_date as char) as timestamp)))
the above statement fails in obiee 11g.
Thanks for your help,
AP

I dont think you need any functions to get the required output, try to set the date format as below
[FMT:timeStampShort]
If helps mark
Thanks
Edited by: Srini VEERAVALLI on Apr 23, 2013 4:18 PM
I think with format and then the below should work with no issues.
timestampadd(sql_tsi_hour, 1,current_date)
I think you are wasting time by posting here, just do it. You no need any ones permissions to do it ;)
Edited by: Srini VEERAVALLI on Apr 24, 2013 8:55 AM

OBIEE 11g installation Issue - Demo Cert in production mode

Hello All, I installed OBIEE 11g along with Weblogic 10.3.5 on Linux 64 bit server. I searched entire <<MW_HOME>> folders and changed PRODUCTION_MODE to false in all possible .sh files. However, the error doesn't go away.
Is there any other location, I need to check for this flag?
Also, when I login to WebLogic console, Domains --> Configuration --> General .. I still see Production mode = true.
Thanks in advance for your help and assistance.
Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 12:12:27 PST 2002,
To: Tue Mar 22 13:12:27 PDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign

Hi Vagic
Did you get any clue on this problem? I'm facing the same warning and I'm not sure if that's releant or not.
Thank you

OBIEE 11g bi_server2 issue

Hi,
I have clustered the environment(horizontal clustering) so Admin server will be 1 and we will have 2 bi_server which is bi_server1 and bi_server2. Here i am trying to "How To Start WebLogic Admin And OBIEE 11g Managed Servers Without Prompting Administrator Username And Password On Unix Environments [ID 1265834.1]" so i followed the same and restarted the weblogic and managed server. But my bi_server2 is not getting started its showing the below error :
used the command : ./startbi_server2.sh > start_bi_server2.log &
<Jul 8, 2012 4:27:28 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:27:38 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:27:48 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:27:58 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:28:08 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:28:18 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:28:28 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:28:38 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:28:48 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:28:58 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:29:08 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:29:18 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:29:28 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:29:38 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:29:48 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:29:58 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:30:08 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:30:19 PM EDT> <Info> <Management> <BEA-141281> <unable to get file lock, will retry ...>
<Jul 8, 2012 4:30:23 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
Server Machine State Status of Last Action
AdminServer(admin) machineA RUNNING None
bi_server1 machineA RUNNING None
bi_server2 machineB FAILED_NOT_RESTARTABLE FAILED
any help is highly appreciated.
Thanks,
RM

Try to remove the file AdminServer.lok from FMW_HOME\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp
and start the server.
Let me know updates.

10g to 11g Migration Issue

Hi,
I am migrating my project in ADF 10v to 11v. When I try to open/edit the application module configuration I receive the following error:
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.sql.SQLException, msg=Unrecognized JDBC URL subtype: null
at oracle.adf.model.binding.DCErrorHandlerThrow.reportException(DCErrorHandlerThrow.java:49)
at oracle.jbo.uicli.mom.JUMetaObjectManager.reportException(JUMetaObjectManager.java:176)
I have checked the connections.xml and everything looks fine.
Any help is greatly appreciated!!
Thanks,
Kumar K.

I have verified the project properties --> business components connection and it looks correct and I am able to connect to the DB from there.
Still if I try to edit the configuration of the application module it give following error:
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: java.sql.SQLException, msg=Unrecognized JDBC URL subtype: null
Thanks.

OBIEE 11g Prompt Issue

I've a dashboard prompt containing a column *'Fiscal Year'*. While opening 'Fiscal Year' in prompt, it shows data like *2012.00,2013.00*...etc though in database data are liike *2012,2013*....etc. How can I rectify this decimal position??
Any suggestion is highly appreciated.
By the way, I'm using OBIEE 11.1.1.5

Hi,
Go to your RPD Physical layer > change the Year column data type double into int then test it out. it should work
also u can try to use round function on the Dashboard prompt year column (edit prompt year column formula section add it)
example: Year data is 2010 then if u use round fxn
ROUND("MT BUSINESS DATE"."Year",0) this will give u 2010
ROUND("MT BUSINESS DATE"."Year",2) this will give u 2010.00
Thanks
Deva

Filter value based on Date in OBIEE 11g, Reporting Issue

Hi,
I have following tables
Dim_Item
Dim_Loc
Fact_Price-Item_Key,Loc_Key,Date_Key,Reason_Code,Amount,Load_date
Reason Code is the code which discribes the reson behind price change
Amount- price of Item at particular location (Note: one item can have different price at different location)
Load Date - When ever there is price change for a particular item at particular location new record is inserted in the fact load date represents the date on which the data is updated
Item_key Loc_key Date_key Reason_Code Amount Load_Date
1                  1        20131113                  0          1400    13/11/2013
1                  1        20131115                  6          1100    15/11/2013
2                  1        20131112                  0          900      12/11/2013
2                  2        20131112                  0          1200    12/11/2013
2                  2        20131113                  3          325      13/11/2013
My report requirement is
Report should show only the Item & location for which there is price change
Report should be like
Item Loc Orignal_Amt Changed_Amt
1       1         1400           1100
2       2         1200            325
I have tried to calculate Orignal_Amt by taking Min(Load_Date) & Changed_Amt by taking Max(Load_Date) but result is not correct
I need to min(Load_Date) or max(load_date) for an Item at particular location
i.e it should be like min(load_date by item_key,loc_key)
max(load_date by item_key,loc_key)
then I can filter out Amount based on this min & max value.
How can I achive this, is there any other approach to achive this
Thanks
Sameer

Hi,
Does this approach with comparing prices in the first and last date of the period actually indicates the price change?
What about the sample data below - is considered to be a price change or not?
Item_key Loc_key Date_key Reason_Code Amount Load_Date
2                  2        20131110                  0          325     12/11/2013
2                  2        20131111                  0          1100    12/11/2013
2                  2        20131112                  0          1200    12/11/2013
2                  2        20131113                  3          325      13/11/2013
Option #1:
Use 2 requests:
Req1 selects surrogate key for the first and last record by load date for each location and product. Surrogate key is just a concatenated expression of Item_Key, Loc_Key and Load_Date fields (use separators between them).
For this request you need to filter out all other dates but first and last - use Rank function with BY clause. It will be 2 calculated fields: RANK(Date_Load BY Item_Key, Loc_Key) = last date, RANK(-Date_Load BY Item_Key, Loc_Key) = first date. Select records having any of these ranks=1.
In result this request should return up to 2 records for each product-location combination with surrogate key, something like this for my example:
Item_key Loc_key Date_key Reason_Code Amount Load_Date          KEY
2                  2        20131110                  0          325     12/11/2013      LOC:2;ITM:2;DT:20131110
2                  2        20131113                  3          325      13/11/2013     LOC:2;ITM:2;DT:20131113
In fact, it could be more than 2 records in case there are more than 1 change in a day for the price and no time stored on date field. This is up to you how to eliminate duplicates.
Now you have another request, resulting one, which is filtered by Req1 using the same surrogate key expression. Orignal_Amt =Min(Amount), Change_Amt = Max(Amount). Apply a filter to find records with different values between them.
In result, if product price is the same in the beginning and end of period (or it is single record) - these records will be filtered out, otherwise you get them in the report.
Option #2:
Play around with logical SQL under Advanced tab, it allows you to write requests with joins (as regular SQL does).
This is sort of desperate option as such an analysis is hard to maintain (make modifications to it).

Help needed in Upgrading 10g reports to OBIEE 11g

Hi folks,
We have a set of BI Answer reports which were developed in OBIEE 10g(10.1.3.4.1). We would like to upgrade it to OBIEE 11g. Could anyone please help me out in solving this.
Thanks in advance.
Regards,
Arun

Hi Arun,
Please refer this thread -- step by step with screen shots.
http://www.rittmanmead.com/2011/02/obiee-11g-migrations/
http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-upgrading-from-bi-ee-10g-repository-web-catalog/
Hope this help's
Thanks,
Satya
Edited by: Satya Ranki Reddy on May 10, 2012 5:53 PM

Issue in Dashboard Prompt of OBIEE 11g

Hi,
I had recently migrated from OBIEE 10g to OBIEE 11g.
I had found that there are lot of things which were working on OBIEE 10g are not working in OBIEE 11g.
For Eg:
I have scenario where i have 2 dashboards with different dashboard prompts.
- *1st Dashboard*: I have prompt with 4 columns Year, Month, Qtr and Week. I can filter the data based on the selection of prompt.i.e Summary Report showing all KPIs and when clicked on the any of the KPI it goes to Below report which shows the graphical view of past weeks data.
- Report: Here i show all the week Ids in the Graph format and when clicked on the any week id it navigates to 2nd Dashboard(below) with appropriate week populated in the prompt and show the detailed records.
- *2nd Dashboard*: I have prompt with 5 columns Year, Month, Qtr, Week and Day of the Week with some detailed report. Here the only Week Id should be pre populated and show data based on the week id selection in the above report.
The issue here in OBIEE 11g is, The month Id which was selected in 1st Dashboard prompt is also getting pre populated into the 2nd dashboard prompt. Which should not happen.
Note: This was working fine in OBIEE 10g.
Is there any way to fix this issue in OBIEE 11g.
Regards
Shyam
Edited by: user9954342 on Dec 23, 2010 2:01 AM

Hi Bala,
Thank you for your response.
I had tried that and resolved my problem but it was impacting other reports i.e
I have other reports in 1st Dashboard with different tabs, Here i want the prompt value to be persisted across the reports in same dashboard so that when i go to other tab with in same dashboard the prompt value should be pre-populated and the data should be filtered against that.
Now if i change the scope to page then i will be loosing this functionality.
It was working on OBIEE 10g and i lost this after migrating to OBIEE 11g.
Can you please help me in this regard.
Regards
Shyam

OBIEE 11g, Informatica and DAC: Migrating from Oracle DB to SQL Server?

Hi Gurus,
Currently we are implementing OBIEE 11g with Oracle BI Application for EBS (Supply Chain, Procurement & Finance modules). We have incorporated all OUT-OF-THE-BOX mappings and configurations in DAC, Informatica and RPD (no change, only OOTB). We were using Oracle DB and Linux servers.
Now the client wants to migrate this to one Windows box.
Can anyone point out, what are the changes need to done to migrate to SQL Server database. Any existing documentation or link will be helpful.
Edited by: Sudipta Gupta on Aug 2, 2012 1:59 PM

If you are using SQL Server 2008 then you need to edit the DAC config.bat file replace sqljdbc.jar with sqljdbc4.jar.
Rest of DAC and Informatica configuration is almost similar.
Let us if you come across any issues.
Hope this helps

Login issue in OBIEE 11g

Hi Experts,
We are using OBIEE 11g
We are facing the strange issue while accessing the presentation services login page.
I had uploaded the RPD file using EM,it is working for 1 hour with out any issue.
After some time the fallowing error is coming. then we are not able to access presentation services,
I had observed all the services are down in EM>Capasity manage ment tab.
Longing screen is coming ,but after entering the credentials ,it is showing login into…but not at all opening the window.
Error connecting to the Oracle BI Server: Could not connect to the Oracle BI Server because it is not running or is inaccessible. Please contact your system administrator.
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 12002] Socket communication error at call=Connect: (Number=0) Call=NQRpc: An unknown socket communications error has occurred.
[nQSError: 12010] Communication error connecting to remote end point: address = SERVERNAME.com; port = 9706.
[nQSError: 12008] Unable to connect to port 9706 on machine SERVER_NAME.com.Please have your System Administrator look at the log for more details on this error. (HY000)
Thanks in advance.

Hi ,
I normally do this to fix this problem
1>Disable the network , keep the loopback adaptor enabled and then restart the services.
2> You can enable the network after services are restarted.
If you want a more practical solution and dont want to disable network again and again, then you would find the blog below useful.
http://www.rittmanmead.com/2012/08/obiee-fmw-and-networking-on-dhcp-hosts/
Hope this help.
Thanks,
Maqsood

OBIEE 10g to 11g Migration on LINUX Machine

Hi All,
I want to Migrate OBIEE 10g (Windows Environment with SQL Server DB) to OBIEE 11g on LINUX Environment with Oracle DB.
If anybody know this can you please help me how to do ?Thnaks in Advance.
As per my Knowledge i know upto this .... "first we need to deploy RPD and WEBCatalog files in to New(OBIEE11g) system and we have to test RPD and WEBCatalog files,Whether these two are working fine or not? Because in OBIEE 10g we have OC4J Server,But in OBIEE 11g Architecture wise it's entirely Different here we have OBIEE WEBLOGIC Server. We have to Deploy RPD in WEBCatlog files in to WEBLogic server. And If any changes have to do in Securities and Variables we need to make changes in that after Migration".
Regards,
Prasad.

Prasad,
Refer the tutorial here..http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm#t4s3
Your approach is correct.

Exporting Issue in OBIEE 11g

Hi,
I am having an issue in exporting a huge amount of data in OBIEE 11g, what happens is : I am able to export the Whole table data which is around 6000 Records, but when I open Excel Sheet the Alignment of the report is ruined after Record number 1890.
I tried this from different browsers and the same result appeared.
can anyone help me with that ?
Regards,

Hi refer this link
http://shivabizint.wordpress.com/2011/08/26/export-more-than-6500-obiee-11g-records-to-excel/
Please mark if its helps you......

Agent Issue In Obiee 11g

In OBIEE 11G, how to send automatically one email for different level users for having a look different data by agent?
For example:
One report architeture:
Region--------District---------Sales
Region 1------District1--------100
------------------District2---------200
Region 2------District3---------300
------------------District4---------400
One Level can have a look at data:
Region-----------------Sales
Region 1-------------300
Region 2------------ 700
Another Level can have a look at data:
Region--------District---------Sales
Region 1------District1--------100
------------------District2---------200
Region 2------District3---------300
------------------District4---------400
Is it possible to implement this requirement in OBIEE 11.1.1.6? Thanks.

Hi Satya,
Thanks for you help.
If I add this new users into one group in users table and send one email to group, it will no result. Message display as below:
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 0 of 0
AgentID: /shared/test/sad
Invalid subscribers skipped: weblogic
create table USEREMAIL
Logon VARCHAR2(50),
Display_Name VARCHAR2(50),
Group_Name VARCHAR2(50),
TimeZone VARCHAR2(50),
Language VARCHAR2(50),
Locale VARCHAR2(50),
Email VARCHAR2(50),
Email_Priority VARCHAR2(50),
Email_Type VARCHAR2(50),
Cell_Phone VARCHAR2(50),
Cell_Phone_Priority VARCHAR2(50),
Pager VARCHAR2(50),
Pager_Priority VARCHAR2(50),
Handheld VARCHAR2(50),
Handheld_Priority VARCHAR2(50)
Create table users(
USERID varchar2(50),
USERPASSWORD VARCHAR2(50),
GROUP VARCHAR2(50)
insert into useremail values
('kobe','kobe_xu','BIAdministrators','','','','[email protected]','H','HTML','','','','','','');
insert into users values
('kobe','123456',''BIAdministrator');
and create AUTHENTICATION block:
select USERID from USERS where USERID=':USER' NQS_PASSWORD_CLAUSE(and USERPASSWORD= ':PASSWORD')NQS_PASSWORD_CLAUSE
CREATE AUTHORIZATION BLOCK and set row-wise:
SELECT 'GROUP', USERROLES FROM USERS WHERE USERID=':USER'
Please help me to find the issue, thanks very much for your precious time.

OBIEE 11g migration issues...

Similar Messages

Maybe you are looking for