Obiee 11g multidimensional cubes are very slow

Hi,
I've noticed that navigation in multidimensional cubes by obiee11g is very very slow, above all in comparison with the microsoft excel plugin.
I've Essbase 11.1.3 (I hope to remind well) and obiee 11.1.1.3.0.
Someone have the same problem?
Thanks

HI Andy ,
Observer the similar kind of performance problem in OBIEE 11g with Oracle Cube build using AWM 11g version .
The same cube access using OBIEE 10g repository is very fast .
I have seen one of my 10g report coming within 30 secs where in 11g it is even hard to come on before 5 minutes .
Just have seen in SR that there are inherent problem of OBIEE 11.1.1.5 version regarding the performance and Oracle asked to apply couple of patch to fix the behavior .
Regards,
DxP

Similar Messages

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Since download of Firefox Hello desktop & laptop both on Windows 7 are very slow even after refresh, download history removed and anti virus software turned off

Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?

Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?

CS4 apps are VERY slow to open Windows file browser with File Open or File Save As commands

We are running CS4 on Windows 7 with all available updates installed. Photoshop and the other CS4 applications are VERY slow to open a Windows file browsing window to select files when File Open or File Save As menu options are run -- it can take as long as a minute or two for the window to open. Once the window opens and a file is selected, then opening or saving the file is very quick. The location of the default directory, whether it is on a local drive or a network drive, makes no difference. Any suggestions as to what the problem might be?

Raphman02
The link that I posted earlier is off. Read this one
http://support.microsoft.com/kb/2501584. I discovered in my network that the MS Office File Validation Patch made excel crawl when opening over the network though nothing else changed. At the time I was opening Excel on Office 2003.
You can manually turn this off by editing the registry and tunring it off. Going forward I skipped the patch to keep my sanity. Not sure if this is the same as your issue, but the support article will go into detail how to either have Fix it
clear the issue or change the proper registry keys.
Hope this helps

IMAP commands are very slow and end up having the connection terminated by the server

Could you please help us on this topic ?
https://answers.microsoft.com/en-us/outlook_com/forum/oemail-osend/imap-commands-are-very-slow-and-end-up-having-the/652390ea-9658-4db6-ae2c-c8fff12a9142

Hi,
Sorry that I am not familiar with Outlook.com account and its server connection. This forum focuses on user clients issue when connect to Exchange server 2013 which is generally an on-premises mail server in domain environment.
Since your issue is related to Outlook.com account, I suggest we can also ask a question in Microsoft Outlook.com forum for more help:
http://answers.microsoft.com/en-us/outlook_com/forum?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1418613687794
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Winnie Liang
TechNet Community Support

After installing 6.1 my downloads are very slow

After installing 6.1 my downloads are very slow

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset Network Settings
Setings>General>Reset>Reset Network Settings

Downlaods are very slow

Whenerver i downlaod things like of 10 mb it says it will take 9 minutes or somthing. Before update and after update its downloading are very slow. When i started playing Call of Duty 4 Multiplayer after sometime my downloads are slower. I downloaded it from utorrent. That files name is Call of Duty 4 Multiplayer.exe it is an rar extractor.

I Think all my web browsers are download slower even Orbit download maneger

My macbook air 1,86 - 2gb are very slow

My macbook air are very slow for boot, start Safari and others applications. What i do?

hi,
repair permission? repair disk? have you done these already?
http://support.apple.com/kb/ht1452
http://support.apple.com/kb/ts1417
cheers.

Outlook 2010 - Opening attachments are very slow

Recently we have migrated windows XP, Office 2007 to Windows 7 Enterprise edition with Office 2010.
After migration found opening outlook 2010 attachements are very slow.
First time when we click the attachments the orange bar is running for a while in outlook then only the appropriate program getting opened.
Approx. it takes 25sec to open any attachments (word, excel, pdf ...even txt files)
Second time if we open same attachment then able to open immediately, if we leave the outlook for a while then we try to open the same attachement then again it takes 25sec to open.
At the moment when we click the attachment the file getting saved immediately to the outlook temp directory.
It look like only opening appropriate program getting delay for some reason.
I tried to disable all the Add-ins, but still same problem.
Can some one please help?
Parani Dhasarathan.

Hi,
I am Chetan Savade from Symantec Technical Support Team.
Are you using SEP 12.1 RU3 (12.1.3001.165) Prior version? If yes, it's a known issue please upgrade to the latest version of SEP. SEP release details are available here:
http://bit.ly/m0vOJp
Here are more details about known issu:
Attachments in Outlook 2010 take longer to open with Symantec Endpoint Protection installed
Fix ID: 3086057
Symptom: Attachments in Outlook 2010 are slower to open with Symantec Endpoint Protection 12.1 installed and the Outlook Auto-Protect feature enabled. Attachments in Outlook 2007 are not affected.
Solution: Optimized the Outlook Auto-Protect plug-in to avoid processing successive callbacks
Reference: New fixes and features in Symantec Endpoint Protection 12.1.3
http://www.symantec.com/docs/TECH206828
Best Regards,
Chetan

Things that are very slow in 11g

I am finding 11g forms much slower than I remember v10 forms and of course much much slower than
6i client server forms. Thus far I found one thing in particular that takes an excessive amount of time IMHO:
find_item
I have a loop that goes through every item on a block that has a lot of items and if you do a find_item in there
that is very very slow.
I'd appreciate it if other peole shared things they found that were excessively slow. I know this is not the only one.

Since most of the tables and indexes are either partitioned or subpartitioned, the above SQL quickly gives us a sense that there are many segments in the system.
If you are interested, here is the breakdown. Anyway, the problem is that we have a lot of tables which has many partitions/subpartitions, with only 1 index or even no index on it. The truncate table or drop table operation is very very slow :-(
select segment_type, count(*) segment_count, sum(extents) extent_count
from dba_segments
group by segment_type
order by 2 desc;
    SEGMENT_TYPE     SEGMENT#   EXTENT#
TABLE SUBPARTITION     1506441        34429790                 this is a lot, isn't it?
   TABLE PARTITION     1000799        41428518                 so is this
   INDEX PARTITION      104062        1440000
INDEX SUBPARTITION      74342        1499875
             TABLE     11160        4885061
             INDEX     6249        2023874
        TYPE2 UNDO      5647        115525
...

TRFC call are very slow going to SIEBEL (TCP/IP RFC problem)

Hi everyone,
we have a problem when testing a connection to a TCP/IP RFC. this is also related to IDOCS being pushed to SIEBEL end. the logon time is very slow.
not sure if this is on SAP end or on theirs. Could anyone give info on this? any would be appreciated.
Logon
48356 msec
Transfer of 0 KB
7 msec
Transfer of 10 KB
6 msec
Transfer of 20 KB
7 msec
Transfer of 30 KB
6 msec
we are also seeing a lot of IDOCs (SM58) that have status Text as "Transaction Recorded".

Hi,
i've resolved problem 46029, but it remains loop problem in Oracle Bi Administration Tool. In addition, if in Answers I click on "Create Direct Request" I have results immediately. Otherwise if I submit a query on "Settings->Administration->Issue SQL, system goes in loop as in Administration Tool. At this point a begin to think that problem is at AWM creation cube step. In your opinion? What about your opinion? What other checks can I do, to resolve the situation?
P.S. If I submit the same query given from NQSQuery.log under SQL PLUS, it goes in loop.
P.S.2. I've tried all on a smaller cube. "Update Row Count" or "Retrieve Data" in Administration Tool now responds in acceptable time. I've deployed cube in Answers, and even in it , query returns in acceptable time. But it's a very small cube. For larger cubes situation is that explained. However, in this way, i think i can exclude all previous problems as cause of my issue. What do you think? However the problem remains. What can i do?
My trouble is that I have still deployed a month ago a cube which responds in two seconds even to complex queries :-). Since that moment, performance has been always worst. The only change i've made has been of execute procedure to have multiple catalogs (and rpds) on same machine...
Thanks
Giancarlo
Edited by: user5380662 on 4-mag-2010 6.55
Edited by: user5380662 on 4-mag-2010 7.25

JDeveloper 11g Tech Preview 4 Very Slow

How to increase the the working speed (cache) of JDeveloper 11g tech preview 4. While coding it is taking time to get it typed. During scrolling the page, it is moving very slow. I have tried with changing the value of AddVMOption -Xmx512M in "ide.conf" file. Changed it to 1024. Still there is no difference. Please help me.....
Thank you for your attention
Vins

And to back up John's words, the TP releases were designated for non-production "preview" use only, were not optimised in anyway, have huge amounts of bugs and are not supported. Best upgrade or you're going to have further issues.
CM.

OBIEE 11g: Searching Subject Area for measure names in Answers

Hello,
I have installed OBIEE 11g SampleApp 825 and just exploring the provided set of dashboards.
From the samples, I am performing following steps:
- I selected Edit Dashboard (for 2.1 Simple Demo Dashboard)
- For Column 2, in the Master Detail 1 Compound View, I did Edit Analysis
- which took me into the Answers design interface with 4 tabs (Criteria, Results, Prompts, Adv).
In the Criteria tab, there is the Subject Area pane on the left where it shows the Subject Area this Answers report is built on and a bunch of Folders like Time, Products, Base Facts etc.
Beside the Subject Area pane, is the Selected Columns pane where you drop fields from the folders.
This particular analysis (Product Line Analysis) has three columns: Revenue Analysis, Products Hierarchy and T05 Per Name Year.
Now, I want to find the folder to which the Revenue Analysis measure belongs. So, I started expanding each node/folder in the Subject Area pane and visually searching for "Revenue Analysis"....cannot find it!
How to determine which Subject Area folder a field on the Analysis belongs to? In Oracle Discoverer, only the Folders from which fields are selected are "enabled" so it's easy to navigate straight to that folder. Or again, in Discoverer, you can actually search for a particular field name and it will return all folders that have that field name pattern. While the Search feature on the top row is useful in finding which Analysis/Report match a string, it does not help in identifying relevant Subject Area Folder fields that match a pattern.
Is something similar available in Answers/OBIEE 11g?
Thanks,
Manish
Edited by: mhathi on Oct 21, 2010 8:53 AM

Again answering part of my own question...It was staring me right in the eye and I couldn't see it:-)...When you have a column in the Selected Columns pane, it's source is right there above the field name. If there is no source folder listed, then it might mean it's a formula. For example in my case, the Products Hierarchy column has the word Product above it...that's the folder it belongs to.
Good. But, the follow-on question still remains, how to search for folders containing a particular string, to find say all folders that have columns like %Margin%?
Edited by: mhathi on Oct 21, 2010 9:27 AM

Jdev 11g application is running very slow.

Hi,
I have deployed the application on Solaris OS, Weblogic 10.3.2 and JDev 11g.
Application is running very slow, means each page is taking time to launch.
Server setup is as follows:
8 cpu's
6gb of memory
8gb swap
15gb /apps
20gb /logs
Please let me know if I need to set any parameters at server level to improve the application performance.
Thanks.

Oh, yes, of course, your /logs partition should be 22.25 GB instead of 20 ;) (that was a joke before you run off and ask for more space)
To amplify what Timo said, you've provided actually no information whatsoever that would help anyone even begin to know what is causing the performance problem. Have you looked at the EM screens? Have you turned on logging to see if it's the database perhaps? You need to do much more diagnosis.
John

Why reports created in 8.5 and saved in XI.5 are very slow?

Hello,
Here is my problem :
I worked with Crystal Report 8.5 and my reports were speedy.
I saved a report in a new version (Crystal XI.5) and the report generation is very slow.
If i saved the same report (saved in 8.5) in the version XI (not the XI.5) the report is speedy.
If i saved the report from XI.5 to XI there is no change (report slow).
Have you ever seen this problem?
The database used is Advantage Database Server 8.1.0.26
Thanks for the help.
Mickael

Hi Mariusz,
It is expected that the reports will run a bit slow in the newer version as the entire report engine has undergone chnage after version 8.5.
With the new version, the database security has been enforced a lot more as compared to version 8.5. Along with this, the SQL generation process has also undergone change and the SQL which is now generated is much more optimized.
Also, there are a lot of new features in terms of formatting the report, which can cause the delay in showing you the first page of the report. It may not just be the database access that is taking time.
As suggested earlier, if you find the query generated in 8.5 was fetching records faster, you can surely create a command object in XI R2 to check if you get the same speed of data retrival.
Regards,
Abhishek Jain.

Obiee 11g multidimensional cubes are very slow

Similar Messages

Maybe you are looking for