Obiee 11g on windows 2008 (64 bit )

Hi Team,
Is OBIEE 11g is support window server 2008 (64 BIT) R2 Standard system...and
if yes please tell me I have to install RCU before installation of OBIEE 11g..reply soon...
Thanks ,
h
Edited by: h on Apr 28, 2011 3:08 PM

Hi,
I hope you are talking about windows server 2008 not windows 8.
Yes , but not all feature are supported. we tried enterprise install and did work but client tools are not supported by Oracle.
http://123obi.com/2011/01/obiee-11g-installation-on-windows7-64-bits-part1/
http://gerardnico.com/wiki/dat/obiee/installation_11.1#on_windows
OBIEE 11g 64-bit install on Windows 64-bit
Hope it helps.
Thanks
Sundeep

Similar Messages

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

OBIEE 11g on Windows 7 64 bit - Error while configuring????

Hi Experts,
I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
1. Installed JDK 64 bit.
2. Installed Weblogic Server with 64 bit JDK.
3. Installed OBIEE 11g - Software only Installation.
4. Ran configuration script. cofig.bat.
5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
7. So, remembering that I installed JRocket Mission Control 64 bit.
8. Un installed previous 11g.
9. Reinstalled 11g on Windows 7 64 bit.
10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
Thanks in advance,
DK

Hi All,
I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
Any idea how to solve the problem?
Thanks

OBIEE 11g on Windows 7 (64 bit)

Experts,
I tried installing OBIEE 11.1.1.5 (both Simple and Software only install) mutiple times on my Laptop running Win 7 (64 bit), but all the times the installation hangs at "Creating domain", the first configuration step. Not sure what I'm doing wrong, I did all the pre-installation steps before running the setup.exe. Does anyone installed OBIEE 11g on Win 7 (64 bit). If yes, please suggest what other things I need to do for a successful installation
Regards,
Sarvan

Hi
Even though officially this is not supported on Windows 7 OS, still we should be able to install it without any issues. I installed OBIEE 11g simple edition on Windows 7, 64 Bit OS and everything is working fine. Infact I used Oracle Express Database Edition 10g instead of full blown Oracle 11g database. I used this to run RCU to create 2 obiee schemas. It did took lot of time though on windows like around 50 minutes for the full installation which installed weblogic, obiee on top of this, then create a default domain named bifoundation. I could create some test reports, dashboards etc.
Here is another link that is also successfull in installing OBIEE 11g on Windows 7, 64 bit:
http://123obi.com/2011/05/obiee-11g-11-1-1-5-0-installation-on-windows-7/
I did not do anything special.
1. Download all the installers, RCU etc.
2. First in my Oracle 10g express edition, run RCU and create 2 schemas for OBIEE.
3. Run obiee installer and wait for about an hour. It came out successfully. Started the domain, started OPMN Services, started a browser with one url.
4. One thing is. I first installed Java/JDK 64 Bit version and put this in the PATH variable. So when I run java -version, it showed me this 64bit JDK. BUT even though I did this, internally the obiee domain still used its own JDK. I checked this in the startup script file named "StartStopServices.cmd" having one property like this:
JAVA_HOME=C:\Oracle\Middleware115BI\Oracle_BI1\jdk
And also under the domain root folder like bifoundation_domain/bin/setDomainEnv.cmd, I could see JAVA_HOME using the same above location.
Thanks
Ravi Jegga

Charts are not showing up on OBIEE 111160 on Windows 2008 64 bit

Hi,
We have installed OBIEE 111160 on Windows server 2008 64 bit. We pointed our RPD and web catalog to OBIEE 111160. But, some of our reports are not showing the chart view. We are able to see data in table view. If we run the same RPD and web catalog on Windows server 2003 32 bit with OBIEE 111160, the reports are showing chart view.
Can anybody help..
Thanks,
Anilesh

I'm running 11g in same config as you, for me no issues.
Not sure exact reason but try these checks
Control Panel->Java : open it
goto Java tab, click View see how many jre are available. If the jre is out side of OFM_HOME make sure you have it in CLASSPATH.
if this is not working out try to set OFM_HOME\Oracle_BI1\jdk\jre, enable it and try.
Let me know updates :)

Oracle Client 11g on Windows 2008 64 bit ASP Connection Problems

Hi,
I'm trying to set up my old ASP applications on a new web server. I've moved from a windows 2003 server to 2008 64 bit.
I've installed the Oracle Client 11g 64 bit drives and if I create a new ODBC connection tat works fine. But IIS will not connect.
Connection string i've been using is:
Provider=OraOLEDB.Oracle.1; Password=******; User ID=*****; Data Source=*****
All i get is no provider could be found.
"3706 Provider cannot be found. It may not be properly installed."
Can anyone help me out / point me in the right direction?
Thanks
Gareth Owen

Hi,
Thanks for the reply. The app pool is running in 64 bit. I've tried installing a 32 bit version of the oracle provider and shifting the app pool down to that and no joy either.
Have tried changing the permissions on the Oracle folder which gives me no joy. It's as if IIS just has no access to the Oracle provider. But I just don't know how to get this working.
Under windows 2003 things just worked when I installed the Oracle provider...
Gareth

Weblogic 11g on Windows 2008 64 bit

It appears that Weblogic 11g for windows only comes in 32 bit and can run ok on 64 bit. I have 24 Gb of memory on the server and my question is will forms and reports user sessions be able to access all the memory? Or since Weblogic is 32 bit, will any forms and reports sessions be restricted to the first 3Gb of memory?
Edited by: user1065650 on Apr 3, 2012 2:21 PM

Hi
Weblogic 11g does come both for 32 Bit and 64 Bit for both Windows and Unix OS. Its just that for 64 Bit OS, for Windows, you need to download WLS Generic Installer (.jar extension) and follow the steps.
See this link and another post in this link for more details:
required weblogic 10.3.5 instllable for windows server 2008(64bit)
If you download and run .exe installer, yes it is 32 Bit. But for 64 bit machines, download .jar installer.
Thanks
Ravi Jegga

OBIEE 11G on Windows 2008 R2

Hi,
What would be the optimum hardware requirement for OBIEE 11G and Oracle db on Windows 2008 R2 ?
-Sreyas

You should be checking : OBIEE 11g Hardware Sizing Information [ID 1290365.1]
Also this thead : OBIEE 11g Documentation lots on information on documentation could be found.
Hope that helps.
Thanks,
SVS

Install OBIEE 11g on Windows 7 64 bit

Hi there,
I've gone thru the previous blogs on install obiee11g on windows 7 64 bit and after going thru all previous posts I got confused and I didn't get clear idea.
I have windows 7 home premium 64 bit OS..so can i install OBIEE11g with Administration tool and all works?
if not how about Windows 7 Professonal 64 bit OS...if it works then i can upgrade my OS to 7 Professional 64 bit.
Can anyone point me on this
your Help is greatly appreciated
skat

Hi skat,
Firstly i would advice windows 7 as such wont support,there are work arounds to install or mount on it but in long run it causes problems.64-bit is not supported for administration tool.
If it is other OS also admin tool should be installed only on 32-bit .......hope oracle releases it on 64-bit too in short time with only admin tool alone to get installed.
On windows 7 installation you get many blogs or forums to get installed.......Better to install on windows 2003/2008 server which output you better.
hope helps you understand.
Cheers,
KK

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

Oracle 11g 2 sobre Windows 2008 64 bits

Hola a todos... tengo el siguiente problema.... cuando instalo Oracle 11g sobre Windows 2008 de 64 Bits aparece un error en la instalacion.... me dice error de protocolo.
Se intala sobre Windows 2008 de 64 Bits con un dominio
Ademas cuando no carga el EM
Saludos
Jorge

No.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

Windows 2008 64-bit SQL Server 2008 64-bit Linked Server fails - ODBC connects but has issues

Installed the 64 but Oracle 11g client and Oracle ODAC.
From SQL Server Management Studio run script : exec master.dbo.xp_cmdshell 'PING OracleHostNameHere' Ping was successful
OraOLEDB.Oracle shows up in the Provider list. Run This Script:
EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'DynamicParameters', 1
GO
EXEC master.dbo.sp_addlinkedserver @server = N'Nav14', @srvproduct=N'Oracle', @provider=N'OraOLEDB.Oracle', @datasrc=N'TheOracleHostName'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'TheOracleHostName',@useself=N'False',@locallogin=NULL,@rmtuser=N'TheUser',@rmtpassword='ThePassWord'
Msg 15015, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 49 The server 'TheHostName' does not exist. Use sp_helpserver to show available servers.
Did the same process on a Windows 7 32 bit Enterprise - ODBC Works after installing ODAC
ODBC worked, shows list of Oracle servers - picked the server - ODBC successful - MS Access able to use that ODBC service.
In Windows 2008 64 bit installed both Oracle 11g Client and 64 bit ODAC - ODBC opens, the list of oracle servers doesn't populate, hard code in the host name - ODBC reports Success.
Another Person Suggested: Win7 64-bit with Oracle 11g. Oddly enough, it ran differently when I opened a command prompt window as administrator and ran setup.exe with the suggested command-line options:
setup.exe -debug -printtime -printmemory -printdiskusage -logLevel finest
While it had previously been failed both by running setup from the Explorer windows as administrator and by running it from the command line as administrator - it died every time at the same point mentioned by others in this thread - just after this message appeared in the log:
Get view named [SummaryUI]
( I have tried re installing with no success)

Windows 7 Enterprise 32-Bit
Installed the version 12 for 32 bit ODAC and it worked. The key is to Install as Administrator once it is unzipped.
Was able to set up Listener then
Was able to set up ODBC using the ODAC. Connect MS Access 2010 to the Oracle views.
Then, tried to install the 64 Bit onto Windows 2008 Server.
It locked up during installation both times.
Installed ODAC without an error.
However, the ODBC setup will not provide a list of the servers in the ODBC TNS Service Name listbox for Server 2008.
In Windows 7, it populates the TNS Service Name.
The list box in Windows 2008 is empty.
Do you know what would cause that?
The .ORA file scrips look the same on Windows 2008 as they do on Windows 7 except it does not have the (server = Dedicated) argument.
Thanks.

Oracle APEX and Windows 2008 64 Bit

Hi
We are using Oracle APEX 3.1 version and Oracle 10G HTTP Server is running on a system which is Windows 2003 32 Bit.
We are planning server Virtualization and for that i would like to know whether Oracle APEX 3.1 version is compatible with Windows 2008 64 Bit or not?
Any kind of help is appreciated.
Thanks,
Lakshmi

Hi,
Thanks for your reply.
Actually my question supposed to be whether Oracle 10G http server that we are using for APEX 3.1 version is compatible with Windows 2008 64 Bit?
If we change to Windows 2008 64 Bit do i need to install Oracle 11g http server?
Advance thanks for your help.
Lakshmi

Obiee 11g on windows 2008 (64 bit )

Similar Messages

Maybe you are looking for