OBIEE 11g Simple Install to Enterprise Install.

Hi Experts,
I have OBIEE simple install in my machine with an Admin Server. Now is there any way i can upgrade that to Enterprise install without Uninstalling and re-installing.
Thanks
Swami

no you cant upgrade from simple to enterprise..you have to do a full install

Similar Messages

  • How to install  OBIEE 11g(already installed Oracle 11g)

    hi, i already installed oracle 11g DB on my system, shall i directly install OBI 11g on that or do i stil need to install l RCU..?
    please help me on this concern,

    Hi,
    1st you need to install RCU 1st then proceed (OBIEE 11g - simple/software/enterprise installation option).
    refer RCU DSN setup & config steps,
    http://gerardnico.com/wiki/dat/obiee/installation_11.1
    also further steps refer my blog,
    http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
    Thanks
    Deva
    Edited by: Devarasu R on Feb 19, 2013 5:35 PM

  • Should OBIEE 11g be installed on a machine having  weblogic already installed?

    Hi Experts,
    We have weblogic server already installed on one of the machines( It got installed when Hyperion was installed)
    Can OBIEE 11g be installed on the same machine with its own weblogic server?
    Thanks
    Ashish

    So If I install OBIEE with software only install and then configure it with Configuration assistant, Would I be able to see the same stuff  in console and the enterprise manager, which I would normally see if had installed OBIEE with its own weblogic?
    Also, what would be the console link in that case?  for OBIEE with its own weblogic .. link is  http://servername.com:7001/console/login/LoginForm.jsp
    And looks like I will always have to coordinate with the Hyperion team as in like restarting of the server and other tasks like config changes.
    Or can you tell me the pros and cons of having a single weblogic server.. cause we have different team for hyperion.
    Thanks
    Ashish

  • OBIEE 11g SampleApp installing error

    Hi Everyone,
    I am getting following error messages in EM while deploying SampleApp from oracle for OBIEE 11g.
    SEVERE: Element Type: BI_INSTANCE, Element Id: coreapplication, Operation Result: FAILED_TO_START, Detail Message: Error in starting one or more components of BI Instance; Please check the server log files for detailed message
    [nQSError: 46066] Operation cancelled
    [nQSError: 46066] Operation cancelled
    Please help.
    Thanks
    Manish

    Make sure all the BI services are up and running before deploying the RPD in the Enterprise manager. You can check to see if all the services are running by going to the system maintainance tab in Enterprise manager under Business Intelligence Domain. After making sure all the services are up and running, try to upload the RPD again, and make sure the RPD is not corrupted.
    -Amith.

  • Analytics Path in server where OBIEE 11g is installed

    Hi All,
    My requirement is:
    For the reports developed, I would like to give my users a user manual kind of document , as a link on my Dashboards.
    I know, we can achieve this using *'Link and Image'* feature.
    But I am not aware, where I can place the document(.pdf format) and the image(.jpg format) file in the server where OBIEE is installed.
    Please help.
    Thanks,
    Abhi

    and then two different owners .Not necessarily, you can use the same OS user, of course on a different Oracle Home.
    where can I find some guide to follow ?http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#sthref106
    http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#CHDCEHBG

  • OBIEE 11g on Windows 7 (64 bit)

    Experts,
    I tried installing OBIEE 11.1.1.5 (both Simple and Software only install) mutiple times on my Laptop running Win 7 (64 bit), but all the times the installation hangs at "Creating domain", the first configuration step. Not sure what I'm doing wrong, I did all the pre-installation steps before running the setup.exe. Does anyone installed OBIEE 11g on Win 7 (64 bit). If yes, please suggest what other things I need to do for a successful installation
    Regards,
    Sarvan

    Hi
    Even though officially this is not supported on Windows 7 OS, still we should be able to install it without any issues. I installed OBIEE 11g simple edition on Windows 7, 64 Bit OS and everything is working fine. Infact I used Oracle Express Database Edition 10g instead of full blown Oracle 11g database. I used this to run RCU to create 2 obiee schemas. It did took lot of time though on windows like around 50 minutes for the full installation which installed weblogic, obiee on top of this, then create a default domain named bifoundation. I could create some test reports, dashboards etc.
    Here is another link that is also successfull in installing OBIEE 11g on Windows 7, 64 bit:
    http://123obi.com/2011/05/obiee-11g-11-1-1-5-0-installation-on-windows-7/
    I did not do anything special.
    1. Download all the installers, RCU etc.
    2. First in my Oracle 10g express edition, run RCU and create 2 schemas for OBIEE.
    3. Run obiee installer and wait for about an hour. It came out successfully. Started the domain, started OPMN Services, started a browser with one url.
    4. One thing is. I first installed Java/JDK 64 Bit version and put this in the PATH variable. So when I run java -version, it showed me this 64bit JDK. BUT even though I did this, internally the obiee domain still used its own JDK. I checked this in the startup script file named "StartStopServices.cmd" having one property like this:
    JAVA_HOME=C:\Oracle\Middleware115BI\Oracle_BI1\jdk
    And also under the domain root folder like bifoundation_domain/bin/setDomainEnv.cmd, I could see JAVA_HOME using the same above location.
    Thanks
    Ravi Jegga

  • OBIEE 11G INSTALLATION IN LINUX

    I would like to have the Linux version compatible matrices for OBIEE 11g to install.
    Thanks

    Hi
    Can you specify what you mean by martrices?
    The documentation of OBIEE can be found on OTN:
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/documentation/bi-ee-087853.html
    The software is available on e-delivery or OTN:
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
    Certification can be found via My oracle Support.
    Please mark as answered/helpful
    Thanks

  • Error during the installation of OBIEE 11g

    Hi all,
    i have an issue with OBIEE 11g when installing it on windows seven .It stops in the creation of the instance as .
    when i read the log file i saw this : java.outofmemoryerror permgen space
    my question is how can i increase the permgen space ?
    Thanks all

    Check this link
    http://prasadmadhasi.com/2011/11/13/increase-java-heap-size-for-oracle-map-builder/
    Also check
    http://www.unitask.com/oracledaily/2012/02/29/obiee-11-1-1-ibm-jdk-tuning-for-weblogic-11g-under-aix-6-x/
    Pls mark if helps

  • Changed OBIEE 11G IP Address

    Good Afternoon
    We changed your Server IP address where OBIEE 11g was installed on.
    I am able to start all our services but when i try to login to Analytics it gets an Authentication failure.
    None of our users created in Console can login.
    Any suggestions?
    Regards
    Rayno

    Verify your steps with Rittman Mead Consulting » Blog Archive » Oracle BI EE 11g – Managing Host Name Changes

  • OBIEE 11g - Upgrading Simple Install to Enterprise Install.

    Hi Experts,
    I have a OBIEE 11g instance in Simple Install. Is there a way to Upgrade the same Instance to Enterprise Install without Uninstalling and Reinstalling.
    Thanks
    Swami

    no you cant upgrade from simple to enterprise..you have to do a full install

  • Creating Domain step fails while trying to install OBIEE 11g (11.1.1.5)

    Hi Everyone,
    I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
    1. Simple Install
    2. Enterprise Install
    3. Software only install (after installing Weblogic 10.3.4.0 separately)
    Everything goes well till the step Bi Configuration->Creating Domain.
    In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
    Excerpt from install2011-07-29_06-13-21PM.out
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Launching NodeManager ...
    Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
    Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
    NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
    NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
    NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
    NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
    NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
    NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
    NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
    NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
    NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
    NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
    NMProcess: java.lang.NullPointerException
    NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
    NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
    NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
    NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
    NMProcess:
    NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
    NMProcess: SEVERE: Fatal error in node manager server
    NMProcess: java.lang.NullPointerException
    NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
    NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
    NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
    NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
    NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
    NMProcess: Stopped draining NMProcess
    NMProcess: Stopped draining NMProcess
    Successfully launched the Node Manager.
    The Node Manager process is running independent of the WLST process.
    Exiting WLST will not stop the Node Manager process. Please refer
    to the Node Manager logs for more information.
    The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
    Node Manager starting in the background
    Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
    <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
    <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
    <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
    <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
    <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
    java.lang.NullPointerException
         at java.util.Hashtable.containsKey(Hashtable.java:314)
         at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
         at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
         at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
         at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
         at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
         at weblogic.NodeManager.main(NodeManager.java:31)
    After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
    One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
    I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
    Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
    Any help on this would be greatly appreciated.
    Thanks and regards,
    Subho

    My problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
    I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
    I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
    Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
    Thanks if anyone help us!!

  • OBIEE 11g install fails on step 7 (database connect string)

    I've currently spent 2 days trying to install OBIEE 11g on two machines (independently). This first is a Windows XP SP3 test PC running 4GB RAM, whilst the second is a Windows 2003 virtual server with 3GB RAM. The Database is Oracle 10g (10.2.0.4.0) on AIX 5.3.
    The DBA has successfully run the RCU on the Database and the schemas needed for OBIEE have been created. The BIPLATFORM schema has also been granted DBA privileges.
    Now I've tried to run both the simple and the Enterprise install for OBIEE 11g, but it always fails at the same step (step 7 of 13: Database details). I have selected the following:
    Database Type: Oracle Database
    Connect String: hostname:port:instance, where hostname is the full server path eg xxxxx.uk.com and instance name is FFADEV01
    BIPLATFORM Schema Username: As per username defined in RCU
    BIPLATFORM Schema Password: As per password entered in RCU
    If i change the connection string to FFADEV01.WORLD i get a 08031 error, whereas I am normally getting an 08035 error. The annoying thing is that I can connect to the schema using RapidSQL and the usernames and passwords as created in the RCU.
    Any help greatly appreciated. Thanks

    How was he able to install the BIPlATFORM schema using RCU on AIX? I thought RCU was only on Linux and Window platforms? I am about to install OBIEE 11.1.1.5 on AIX with a Oracle 10g DB but from what I read I wont be able to create the needed OBIEE schemas for the install because I won't be able to use the RCU on AIX. Any help would be appreciated.
    Thanks.
    Ryan

  • OBIEE 11g 64-bit install on Windows 64-bit

    I wanted to solicit any experiences that the user forum is having with installing 11g on a 64-bit Windows platform. I understand that the Admintool/Job Manager will not run with the 64-bit installation package but we can install the newly released Client install to circumvent this. I am seeing many forums out there in which the 64-bit OBIEE install is done as Simple or Enterprise. My understanding is that this is useless as the bundled WebLogic utilizes at 32-bit JVM. There is a Doc ID out on Metalink (ID 1220564.1) that states one can only do a Software Install. So we have proceeded with the following steps of downloading first the Java 64-bit JVM, then a WebLogic instance utilizing the 64-bit JVM (java -D64 -jar xxx.jar) and finally the OBIEE Software Only install.
    The issue we are running into is that the Install fails when attempting to start the OPMN. So during the install the "Executing:opmnctl start coreapplication_obips1
    " fails and references the OPMN not starting. We are unable to start the OPMN service as well. We have a static IP, so this not the known issue with the loopback adapter. The other issue I saw was having to install the VC++ 2005 SP1 libraries per another Metalink Doc ID (1226254.1). This was all done, however, the install continues to fail.
    It seems the lack of knowledge from support as well as the vague/lack of documentation is frustrating. I just wanted to ping the OTN community around this scenario.

    Thanks Paul, really appreciate the update. Spent this morning rebuilding our environment with 64-bit (Win 2008) and starting from scratch. The install has now succeeded. I tell you one thing you pointed out is something we noticed when we proceeded with the second install. That was the WebLogic version. I had initially used .4 and on the second install we used .3. I am guessing that this may have been the issue.
    I will verify with our Oracle resources and I hope this post will assist other when doing the 64-bit install as I think it is very vague in the documentation.
    I will update the post with Oracles response as well.
    Just as an FYI... the reason this issue came up in the first place was we did an Enteprise Install on 64-bit and found that the Gauge Charts weren't working in the SampleAppLite Subject Area. So I will add that to the Tags for this post.
    Hope this post helps others and they don't go through the headaches of a wrong install type.

  • Installing  Repository Creation Utility (RCU) for OBIEE 11g

    Hello,
    We are working on installing the Oracle Business Intelligence Entreprise Edition Plus 11g (v 11.1.1.6.0) for a POC in our Company's network.
    We have to install the OBI Server and other server-side components on a IBM AIX (64-Bit) server; and the client tools on the local Desktops.
    My queries:
    *1. I am downloading the following softwares for this setup. Please help me understand is this the complete list of softwares required, or are there any more softwares required for OBIEE 11g intallation?*
    List of softwares to be downloaded:
    1) Oracle Business Intelligence, v. 11.1.1.6.0
    - for AIX (64-Bit):
    Disk 1 (1of2) (1.4G) (cksum 4182440856)
    Disk 1 (2of2) (1.5G) (cksum 2020935297)
    Disk 2 (1of2) (1.7G) (cksum 796853559)
    Disk 2 (2of2) (1.3G) (cksum 685152953)
    Disk 3 (1.6G) (cksum 1431984641)
    2) Repository Creation Utility (11.1.1.6.0)
    for Microsoft Windows (32-bit) (320M) (cksum 2503314275) OR for Linux x86 (32-bit) (391M) (cksum 201758785)
    Link for (1) and (2): http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bi-downloads-1525270.html
    3) Oracle Business Intelligence Developer Client Tools Installer (11.1.1.6.0)
    - for Microsoft Windows x86 (32/64-bit): (360M) (cksum 3317017977)
    Link for (3): http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
    NOTE: The JDK 1.5.0 is installed
    *2. Where should the additional required software 'Repository Creation Utility' be installed in this case?*
    I can see it is available for 32-bit OS (Windows or Linux x86), and that is why I suspect it to be a client-side software - which is to be installed on my local desktop. Hence, Can I download the Repository Creation Utility (11.1.1.6.0) for Microsoft Windows (32-bit) (320M) (cksum 2503314275)
    Please clarify.
    *4. I will not be installing any of the Oracle BI Applications, so will I require the software Oracle Business Intelligence Data Warehouse Administration Console (10.1.3.4.1)?*
    I assume NO.
    *5. IMP: Is there a Web server (E.g. Oracle WebLogic Server) included in the OBIEE suite, which gets installed in the default installation settings?*
    OR Is there a need to download and install a separate Webserver on the AIX system before installing OBIEE.
    Please reply ASAP.
    Thanks,
    Shweta.

    Although it is a POC, but the installation has to be done on a AIX6.1 remote system, which will be used as a server in the enterprise, with 5 to 7 people accessing it. So 'simple install' is not suitable in this case.
    The AIX6.1 system has a JDK 6 (64 bit).
    I understand that the OBIEE 11g suite comes with a Oracle WebLogic Server (OWLS) installable included in the suite. However, in case of Software Only installation type, the OWLS needs to installed first and then the installer has to be started in 'Softwar Only' mode.
    Could anyone please suggest:
    *1) does 'Enterprise Install' type suite on the AIX6.1 system? If yes, does it mean that it will install JDK once again? is this recommended, as the host system is a shared server and the existing JDK 6 (64-bit) can be in use by other applications on this system.*
    *2) If (1) is not true, is there a way to install the Oracle WebLogic server using the OBIEE 11g installer itself? or do I need to download the WebLogic server installer separately from the OTN site?*
    Thanks in advance for any helping pointers on the above.
    Please reply ASAP, as this is urgent.
    Thanks,
    Shweta.

  • OBIEE 11g installing in Linux. domain creation error

    Hi,
    OBIEE 11g installing in Linux server now. domain creation is in progress for about an hour and in log I can see below error.
    Creating a new AdminServer Object ...
    AdminServer port is 7001
    Starting the domain ...
    java.lang.OutOfMemoryError: PermGen space
    java.lang.OutOfMemoryError: PermGen space
    java.lang.OutOfMemoryError: PermGen space
    domain creation is still running and looks like it is struck to start domain no idea how to solve the issue. waiting to see whether domain creation successful.
    Please let me know how to fix this issue.
    Thanks
    Jay.

    Hi,
    Have you try to increase MaxPermSize, it may occure memory issue.
    change the Middleware/ORACLE_BI1/oui/oraparam.ini and fine it like below
    JRE_MEMORY_OPTIONS=" -mx512m -XX:MaxPermSize=512m" then try to change it
    JRE_MEMORY_OPTIONS=" -mx2048m -XX:MaxPermSize=2048m"
    (i.e:It will increase the numbers for allocating more memory) then save it and then try to run config.bat (software only/enterprise) method and configure it.
    Thanks
    Deva

Maybe you are looking for

  • Open url in a remote panel

    HI. I want to put a button that launch a webpage. I works fine locally, when I click OK button, a  new internet window browser is open with the URL. But if I take the control in other PC client (using Web Publishing Tool) and I click OK button a inte

  • Why is my iPod Touch so slow on Verizon midi 4620L?

    I just got a Verizon mifi 4620L Jetpack hotspot thingy. I connect my MacBook Pro to it and get 17mbps or so download speeds, 3mbps or so going up. I connect my 3rd gen iPad to it and get about the same. But when I connect my 5th gen iPod Touch to it

  • Is there a direct download link for AE 12.1? Many problems trying to update.

    I haven't seen this issue resolved anywhere in the forum... I have had so many problems and wasted a whole day (and a half) on trying to ressolve this when I should have been working. No surprises that I have installed OS Mavericks recently. Yesterda

  • Best logic to insert records with constant set of values.

    hi all, i am using Forms [32 Bit] Version 6.0.8.24.1 (Production). i have process type 'I' and 'E'. if process type = 'I' then i have to insert five records into table. "company,job type,serial,process type,value,created by,created on" here all colum

  • Problem with Merge into stmt

    Dears, I m using 10g XE. I am using merge into stmt, to inesrt non matched records and to update matched records with respect to primary key. I have two uers in oracle. (TMP and REAL) I have n number of tables with same definition in both users. I wi