OBIEE 11g - Usage Tracking Not Working

Dear All,
I have enabled the usage Tracking in OBIEE 11g by using Setting up Usage Tracking in Oracle BI 11g guide.
Still i am getting the following error
Usage Tracking not started due to non-existent Usage Tracking table "12-Usage Tracking"."Usage Tracking Schema"."S_NQ_ACCT".
In my RPD,
Database Name : "12-Usage Tracking"
Physical Schema Name : "Usage Tracking Schema"
Physical Table Name : "S_NQ_ACCT"
This table reside under BIPLATFORM Schema in Oracle.
I have followed the steps mentioned in the Document, still unable to find why getting such error. Please point out if any mistake exists.
Please advice.

Hi,
Good for you.
Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

Similar Messages

OBIEE 11g - Usage Tracking - All details are not captured

Hi
We have implemented USAGE TRACKING in our RPD on OBIEE 11.1.1.5. It is working fine, only in few cases it is failing... failing to update with appropriate information...
For the field SUCCESS_FLG the value is populated as 3 - which means "The query failed due to some other reason" as per documentation. When checked the logs, there is no much information in that to conclude what went wrong. Log level is set to 3.
My question is, What are the possible reasons to have this success flag as 3? To capture all the details in the table S_NQ_ACCT, what need to be done? Any settings change?
Please share your thoughts...
Thanks,

Hi,
Good for you.
Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

OBIEE 11G - Usage Tracking - Table S_NQ_DB_ACCT

Hi
I successfully set up usage tracking in Obiee 11 and the table S_NQ_ACCT gets a lot of new records. Basically it's working.
In the nqserver.log I get some errors concerning a new table S_NQ_DB_ACCT:
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute: INSERT INTO S_NQ_DB_ACCT (ID,LOGICAL_QUERY_ID,QUERY_TEXT,QUERY_BLOB,TIME_SEC,ROW_COUNT,START_TS,START_DT,START_HOUR_MIN,END_TS,END_DT,END_HOUR_MIN) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12).
This is an additional Usage Tracking Table which didn't exist in OBIEE 10G.
I configured the table as S_NQ_ACCT in the same place in the repositry/connection pool. Writing to this table should be possible.
Does anybody has an idea what could be wrong? Does another user fill data to this table than the user which fills data to S_NQ_ACCT?
Thank you

Hi
Thank you.
I use the table within the default RCU created schema. What I don't understand ist why the table S_NQ_ACCT gets a lot of records (because I set the loglevel) but S_NQ_DB_ACCT keeps empty with the error in the nqserver.log. I mean if one table works then the other should be working too? I checked also the permissions which are the same for both tables.
[2012-06-04T15:14:39.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 7d4f9e9d968c0bfe:-39c197c9:13773b9d89f:-8000-000000000005c768] [tid: 18e0] [nQSError: 17011] SQL statement execution failed. [[
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute: INSERT INTO S_NQ_DB_ACCT (ID,LOGICAL_QUERY_ID,QUERY_TEXT,QUERY_BLOB,TIME_SEC,ROW_COUNT,START_TS,START_DT,START_HOUR_MIN,END_TS,END_DT,END_HOUR_MIN) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12).
]]

OBIEE 11g Usage Tracking -

Hello,
I'm looking for a better way than Administration/ Manage Sessions to keep an eye on long-running queries.
Is there a way to get OBI to place information about currently running (started but not ended) queries into usage tracking so that I can see long-running reports though an analysis in the Usage Tracking subject area?
As far as I can see, I can only query completed reports/dashboards from the usage Tracking Subject area. The "status" column in the Manage Session display is not availalble in the Usage Tracking subject area and a filter on End Time = null yields no results. Any ideas/strategies welcome! Thanks.

You could use the nqquery.log to look for queries that have started but not finished. You'd need to parse it for relevant start/finish and match up the IDs.
There is an nqquery.log parser on MOS somewhere, that might be a good starting point.

11.1.1.6.0 Usage Tracking not work

Hi Gurus,
I'm trying to set usage tracking in 11.1.1.6.0,I followed the steps in following link:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi1116/ut/ut.html
The problem is that I can't view any data in the S_NQ_ACCT table. My database is Oracle 10.2, but in the article it said 11.2 or later,so please let me know if it is the database issue.

You need to import S_NQ_ACCT metadata again from your current database(BIPLATFORM) then only it will work. Because datatypes changed and new unique "ID" added in 11.1.1.6.
I also faced same issue and after importing metadata again and joined the table again then it worked for me.
Thanks,
Prasad

OBIEE 11g Usage Tracking - Physical SQL

Hi All,
The Query Text column gives me only the logical SQL. The Log Level is set at 2. How can I get the physical SQL via Usage tracking?
Thanks for your time and help.

Hi,
Good for you.
Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

IPhone 6 Battery Usage setting not working.

When I go to my setting and check my Battery Usage setting it states: "Battery information will be available after using iPhone for a few minutes". I've been using it for hours and I get the same response when I go to the setting. I've turned off my phone multiple times to see if that would resolve it, but it hasn't. Is anyone else experiencing this behavior?

Hello.
I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
I wrote to the Apple about this problem.
Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
Regards

IPhone 6 Battery Usage function not working

Battery Usage feature continues to read; "Battery information will be available after using iPhone for a few minutes" even though I have now had the phone and used it for one week. Using iPhone 6, 64G, IOS 8.0.0.(no iOS updates have yet been applied)
A few days ago I attempted some suggestions posted by others. One of those was to let the battery drain to zero then fully charge. This had no affect on the Battery Usage feature. Another suggestion that i tried was to close all open apps on phone, then shut down phone and then turn back on. This did not resolve the Battery Usage issue either.
Is apple aware of this issue? Any help would be appreciated.

Hello.
I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
I wrote to the Apple about this problem.
Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
Regards

Usage Tracking not displaying in Data in 11g

Hi Gurus,
One of my collegues complained that the Usage Tracking(UT) which is OOTB functionality in 11g does not show any data expect the Time table.
Is this a bug, as UT is pre-configured in 11g, do we need to do any customization for this to make it work.
Can please anyone help with the steps to troubleshoot.
Regards,
Amit

Hi A,
The steps are all done they can see the data in the View Data Section in the Physical Layer, but no data is appearing when they create the Reports in Answers, thats kind of weird was my first expression. I asked them to check the Business Model Diagram but they are of the opinion that as it is OOTB functionaly they did not meddle with the BMM.
Really critical and need to bring the data in the Answer in 11g, any quick help will be appreciated.
Rgds,
Amit

OBIEE Usage Tracking not collecting all data!

Hi guys
Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
Does anybody have a an idea as to what could be wrong here?
Best regards, Jacob

Jacob J wrote:
Hi guys
Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
Does anybody have a an idea as to what could be wrong here?
Best regards, JacobWhat usage stats are missing? Is there any pattern/behavior where the stats are not being inserted into the tables?

11g usage tracking

I have installed 11g r5 and I need to configure Usage Tracking
but I cannot find ddl-file to create S_NQ_ACCT table.
...bifoundation\OracleBIServerComponent\coreapplication_obis1\schema\SAACCT.Oracle.sql
where I can find this ddl-file?

You can use this,
CREATE TABLE S_NQ_ACCT
USER_NAME VARCHAR2(128 CHAR),
REPOSITORY_NAME VARCHAR2(128 CHAR),
SUBJECT_AREA_NAME VARCHAR2(128 CHAR),
NODE_ID VARCHAR2(15 CHAR),
START_TS DATE,
START_DT DATE,
START_HOUR_MIN CHAR(5 CHAR),
END_TS DATE,
END_DT DATE,
END_HOUR_MIN CHAR(5 CHAR),
QUERY_TEXT VARCHAR2(1024 CHAR),
QUERY_BLOB CLOB,
QUERY_KEY VARCHAR2(128 CHAR),
SUCCESS_FLG NUMBER(10),
ROW_COUNT NUMBER(10),
TOTAL_TIME_SEC NUMBER(10),
COMPILE_TIME_SEC NUMBER(10),
NUM_DB_QUERY NUMBER(10),
***DBTIME_SEC NUMBER(10),
***NUMDB_ROW NUMBER(10),
CACHE_IND_FLG CHAR(1 CHAR) DEFAULT 'N' NOT NULL,
QUERY_SRC_CD VARCHAR2(30 CHAR) DEFAULT '',
SAW_SRC_PATH VARCHAR2(250 CHAR) DEFAULT '',
SAW_DASHBOARD VARCHAR2(150 CHAR) DEFAULT '',
SAW_DASHBOARD_PG VARCHAR2(150 CHAR) DEFAULT '',
PRESENTATION_NAME VARCHAR2(128 CHAR) DEFAULT '',
IMPERSONATOR_USER_NAME VARCHAR2(128 CHAR) DEFAULT '',
NUM_CACHE_INSERTED NUMBER(10) DEFAULT null,
NUM_CACHE_HITS NUMBER(10) DEFAULT null
)

OBIEE 10g Usage Tracking

HI Experts,
I have implemented Usage Tracking in our project.
I have few questions on this implementation.
1. Users coming from Ldap server-- One new user loged into answers after that he has not doing any thing, The home page is blank. wether this user captured into usage tracking table or not?
2. After login this user he has not select any report /Dashboard .
Please let me know how we captured this user in usage tracking.
Please help me it is very urgent.
Thanks

Check these
http://obiee101.blogspot.com/2008/06/obiee-directing-user-to-default.html
http://santoshbidw.wordpress.com/2010/11/12/portalpath-variable-obiee-10g/
Pull one more date column click on fx->click on variable->Session-> enter USER
Pls mark correct or helpful

OBIEE set up.exe not working

Hi,
I am trying to install OBIEE on my windows 2008 server Virtual machine. I have the BI zip files (Unzipped into one folder ) on my external hard drive. When I try to access the file and run the setup.exe on my virtual machine it is not working. The command prompt shows up and then the command prompt disappears and nothing happens.
No error message is displayed. Any idea whats happening? and how can this rectified?
Thanks in advance for your answers

Are you back with different question with same issue?
RCU.bat is not opening in my virtual machine.
Copy all installables in VM and try.

OBIEE 11g Report UI not showing data

Hi,
On Obiee 11g Report, the query hit by the report at the backend shows results for all the columns but on UI only few of these columns show the data. From Query log, when I run the same query in the database I see all columns have data which is somehow not showing up on the UI end. What could be the problem? Can this be resolved or is it a bug in the OBIEE 11g?
Regards
VM

Hi Vanaja M/Gurus,
Is that your problem resolved?
I'm facing same issue here.
I was checking for solution/suggestions in blogs, but unfortunately i couldn't find much information in blogs too....
Can you help me out to cross this hurdle, as this issue is in Production.

Report 11g RUN_REPORT_OBJECT is not working FRM-41214

Dear all,
We are not able to run the reports using RUN_REPORT_OBJECT from forms 11g, we have tried our maximum to resolve this issue, unfortunately no proper documentation. Forms working without any issue are able to see the report out puts if I try running the report using internet explorer, but from the forms using RUN_REPORT_OBJECT It is getting failed. I could see two reports servers were running RptSvr_xxxxxx_FrmInst, rep_wls_reports_xxxxxx_frminst both servers queue status page also we can browse, but the reports running using RUN_REPORT_OBJECT is not working, the job queue is not showing these jobs.
When I use report diagnose it is showing "Exception when retrieving IOR"
Environment - Fusion Middleware 11.1.1.5.0, Windows 2008 server
Error : FRM 41214 Unable to run report
Can anyone through some lights on this issue.
We areTrying the below code :
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Thanks & Regards

user11319190 wrote:
I have posted it in the begning ,anway i am copying it for you again...
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
-----Please not that it is not reaching here......
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Edited by: user11319190 on 08-May-2013 00:12Hmm.. I don't see the report name whom is calling or run. I modified your code, give a try..
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(V_REPORT_ID,REPORT_EXECUTION_MODE,BATCH);
/* edit the report name like D:\repname.rep */
     SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,<write the full path of reports>);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
VJOB_ID := SUBSTR(VC_REPORTSERVERJOB,INSTR(VC_REPORTSERVERJOB,'_',-1)+1);
/* i added loop */
     WHILE VC_REP_STATUS in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
       vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
     END LOOP;
-----Please not that it is not reaching here......
IF VC_REP_STATUS = 'FINISHED' THEN
    WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
    message ('Report failed with error message '||vc_rep_status);
END IF;
END;Hope this works..

OBIEE 11g - Usage Tracking Not Working

Similar Messages

Maybe you are looking for