OBIEE Action Could not be invoked

HI
when scheduling bi publisher report through OBIEE Action webservices link getting following error:
Action could not be invoked.
ServiceExecutionFailure :
Error invoking web service ScheduleService at endpoint http://xxx:9704/xmlpserver/services/v2/ScheduleService
Client received SOAP Fault from server : java.lang.NullPointerException
please suggest
thanks

Hello,
Please check ChaRM related SPRO points under the node
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
-> Extended Configuration
-> Change Transaction
-> Change Transaction Types
and also sub-node "Actions in Change Request Management2 and all its activities. These SPRO activities contain settings that are important to ChaRM activities.
Best regards,
Miguel Ariñ

Similar Messages

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

The selected operation process could not be invoked.

The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is bpws:getVariableData('Variable_1') <= ora:getPreference(dyn_var). The XPath expression failed to execute; the reason was: oracle.xml.parser.v2.XMLNodeList cannot be cast to java.lang.String. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is bpws:getVariableData('Variable_1') <= ora:getPreference(dyn_var). The XPath expression failed to execute; the reason was: oracle.xml.parser.v2.XMLNodeList cannot be cast to java.lang.String. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is bpws:getVariableData('Variable_1') <= ora:getPreference(dyn_var). The XPath expression failed to execute; the reason was: oracle.xml.parser.v2.XMLNodeList cannot be cast to java.lang.String. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more

The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is bpws:getVariableData('Variable_1') <= ora:getPreference(dyn_var). The XPath expression failed to execute; the reason was: oracle.xml.parser.v2.XMLNodeList cannot be cast to java.lang.String. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is bpws:getVariableData('Variable_1') <= ora:getPreference(dyn_var). The XPath expression failed to execute; the reason was: oracle.xml.parser.v2.XMLNodeList cannot be cast to java.lang.String. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is bpws:getVariableData('Variable_1') <= ora:getPreference(dyn_var). The XPath expression failed to execute; the reason was: oracle.xml.parser.v2.XMLNodeList cannot be cast to java.lang.String. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more

Getting error selected operation process could not be invoked while testing?

Hi All,
Can some one help me on the below issue
Scenario:
I need to call a procedure from a package
Getting below error
The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricException: oracle.fabric.common.FabricInvocationException: Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications.. Error Code: 0 Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?) Query: DataModifyQuery(): Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications.. Error Code: 0 Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?) Query: DataModifyQuery() 
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricException: oracle.fabric.common.FabricInvocationException: Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications..
Error Code: 0
Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?)
Query: DataModifyQuery(): Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications..
Error Code: 0
Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?)
Query: DataModifyQuery()
at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575)
at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381)
at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricException: oracle.fabric.common.FabricInvocationException: Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications..
Error Code: 0
Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?)
Query: DataModifyQuery(): Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications..
Error Code: 0
Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?)
Query: DataModifyQuery()
at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260)
at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985)
at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729)
at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569)
... 69 more
Caused by: javax.xml.ws.soap.SOAPFaultException: oracle.fabric.common.FabricException: oracle.fabric.common.FabricInvocationException: Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications..
Error Code: 0
Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?)
Query: DataModifyQuery(): Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.3.0) (Build 100323)): oracle.toplink.exceptions.DatabaseException
Internal Exception: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepool.ResourceDisabledException: Pool SOALocalTxDataSource is Suspended, cannot allocate resources to applications..
Error Code: 0
Call: SQLCall(UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + ? WHERE SEQ_NAME = ?)
Query: DataModifyQuery()
at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105)
at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256)
... 72 more
Regards,
Kiran Kumar

As answered by Punnet, your Datasource SOALocalTxDataSource on weblogic console is in suspended state.
Login to weblogic console. go to datasources --> SOALocalTxDataSource -->Control Tab --> Click Resume and try again.
Regards,
Karan

App Catalog ERROR "The action could not be completed. Try again later" Yellow exclamation mark

Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log
with Description to [email protected]
Reference number for chat: Chat session ID number 89786521
Do you have any solution?
Best regards
Rufat Jalilov
Post relates to: Pre 2 p102una (Unlocked NA)

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

Outlook Web Access Search - Action could not be completed

Hi All,
When I try to search for an email in OWA 2010 I get the following error message..
The action could not be completed. Please try again..
I have tried restarting the Microsoft Search (Exchange) service to no avail. Anybody know what could be broken here?
Thanks ahead of time,
Mike

You will need to execute a script on the affected Mailbox servers that reinstalls the symbolic links:
Download the script Repair-ExchangeSearchSymlinks.ps1 from
the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange
Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script:
.\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset:
.\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event
ID 110 for each database when the index rebuild has completed.
Please consider: you have to wait up to 24 hours when the index rebuild has completed and after
receiving Event ID 110 for each database, test to
make sure search functions correctly with both OWA and Outlook operating in Online Mode.

Problem with App catalog this action could not be completed

I have not been able to use App catalog since a few days.
I am in UK on O2 network using US unlocked Pre2. It was possible to use App catalog and install free apps only. Now App catalog always load with error: " this action could not be completed, please try again later".
Post relates to: Pre 2 p102una (Unlocked NA)

@ rufat_j and @alfagtv100:
Could please send me a private message containing the palm profile account, IMEI, serial #, carrier used, and country for those phones. This information can be found in the device info app.
Please also tell me if you do have any homebrew applications installed or not, apps installed from other sources than the app catalog. This can greatly help.

BUG: This action could not be completed. Try again later.

In trying to update the app, "Foursquare (Now)" via Preware, I am encountering the error, "This action could not be completed. Try again later." I previously had installed this app, which ran normally. I was updating the app with the newest version when I encountered this error. I uninstalled the app, then attempted to reinstall it, but it gave the same error (and now I do not have even the prior version running).
I have had no other difficulty installing homebrew apps and app store apps via Preware.
I'm on a Pre running WebOS 1.4, with 5.4 GB free.
A little help?

Hello thonght and welcome to the forums;
Each phone is associated with a specific country. The country is assigned automatically the first time a Palm profile is created on the phone. The App Catalog apps you can access are based on the country associated with the phone.
Phones associated with the following countries or regions can use App Catalog to purchase apps and to download free apps:
Canada; Germany; Ireland; Mexico; Spain; United Kingdom; United States
Phones associated with the following countries or regions can use App Catalog to download free apps only:
Australia; Austria; Belgium; China; Czech Republic; France; Hong Kong; Italy; Luxembourg; Netherlands; Norway; Poland; Switzerland
As Vietnam is not a currently supported country for the App Catalog, this is likely why you are unable to access any applications.
I apologize that this is not an answer that will correct the error you are seeing, however I hope this has been helpful.
TreoAide

The action could not be completed. Try again later when try to update apps

Hi there,
Today I did run the update utility in my unblocked Palm Pixi Plus. I got the message that updates are available for most of the apps I have installed. When I hit on show updates, I can see the list of updates but after a few seconds I got the following message: The action could not be completed. Try again later.
My Palm webOS version is 1.4.5
Unfortunately, I just realized that online support chat was discontinued, it helped me a lot before.
I appreciate I find a fix in here.
Thank you in advance,
Luis.

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

CommandButton action would not be invoked

I am trying to follow the JSP 1.2 standard. The page is rendered correctly. The drop down list is populated successfully, which means my bean is correctly registered and initialized. However, when I click the button, the action is not called. (I have logger statement inside the create method). Can someone help? I am thinking that maybe the 1.2 JSP caused the problem. Thanks!
I am using Tomcat 4.1.29
<?xml version="1.0"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
 <f:view>
<html>
<head>
<title>CreatProduct</title>
</head>
<body>
<h:form id="createProductForm">
Id:<h:inputText value="#{createProduct.id}" id="id"/>
Name:<h:inputText value="#{createProduct.name}" id="name"/>
Width:<h:inputText value="#{createProduct.width}" id="width"/>
Length:<h:inputText value="#{createProduct.length}" id="length"/>
Price:<h:inputText value="#{createProduct.price}" id="price"/>
Description:<h:inputTextarea value="#{createProduct.description}" id="description" rows="5" cols="20"/>
 Categories:<h:selectManyListbox value="#{createProduct.selectedCategories}" id="selectedCategories">
<f:selectItems value="#{createProduct.categories}" id="categories"/>
</h:selectManyListbox>
<h:commandButton value="Create" action="#{createProduct.create}"/>
</h:form>
</body>
</html>
 </f:view>
</jsp:root>

Thanks. It is resolved.
End up to be my bean has a typo with one of the property setter method.
It's always nice to turn on logger for JSF packages.
I think for this kind of problem JSF should throw a fatal exception. At least it should tell the developer that one of the setter method could not be found.
Currently, JSF just log a debug message (PropertyResolver24...) quitely and the action is not called.

Button Actions are not working -invoking task flow from other project regio

Hi
I have a project using a mani.jspx file having a regions and the region is updated with different views based on a router condition in my bounded task flow. Everything working fine with in the project. I have a seperate project in my application having an index.jspx and region in it. I created the ADF lib jar file of the first project and imported to this project. I could invoke the task flow in the first project to the region in the index.jspx file in the seconed project.But none of the action managed bean method attached to the buttons in this view are working.The methods are not getting called on clicking on button and no error in the backend console of Integrated weblogic server.Any body can help what could be the issue ?
Thanks
Suneesh

The issue that is happening when I refreshed the region with task flow from the project I imported.If I load the taskflow from the imported project on first time rendering all my managed bean actions are executing but if I load a different flow initially and change the taskflow Id imported from other project none of the managed actions are working.
Thanks
Suneesh

OWA error "The action could not be completed. Please try again".

Hi All,
We are facing some issues with OWA recently. When we try to search any thing from inbox/sent, we are getting above mentioned error.
We have Exchange 2010 with sp1. We observed 3 times that the Exchange Management Console was not turned up properly in the gap of 2 Months time. At that time we restarted the IIS in the Exchange server and the issue solved.
We have faced the same issue today. We restarted the IIS of Exchange server. Exchange Management Console is fine and the OWA access was also good. But we found the above mentioned error when try to search in inbox/sent.
We did following steps:
1) Ran Best Practice................ Didn't find any issues. Only Network drivers showing as very old.
2) Observed the Event Viewer. Found some errors relating to the Antivirus.
3) The Exchange Index and Search services are restarted. But no use.
Could any one suggest how to resolve this issue?
Thanks,
Ram.

Hi,
Firstly, I’d like to confirm if there is 9842 error in your event log and if search in Outlook works well.
If yes, you can check if the following article can help you:
http://terenceluk.blogspot.be/2013/01/searching-in-exchange-server-2010-owa.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support

Authorise Change request action could not be successfully executed

Hi Gurus,
I have done the customization in the sdcr actions. twice i have checked the configuration. i hope all the settings are correct.
But when I try to execute the action in crmd_order (authorise change request), It's not triggering any thing.
I have done the below
1) copy the sdcr profile to zdcr profile
2) added the new status profile in the desired status
3) Copied the action and added my action
4) Defined the condition
Can you please help me to resolve the issue
Thanks & Regards
Venkat

Hi
This might help
[Re: CHARM: No Actions are Displayed|Re: CHARM: No Actions are Displayed]
Thanks,
Jansi

I get this message when trying to open a file from my company cloud: Error: This action could not be taken because the applet has not initialized. What do I need to do to be able to look at a file? Thank you!

Help!

There is software you installed to work with your company's cloud service, update it or talk to the developer.
If it's Apple's software, then run through this list of fixes.
..Step by Step to fix your Mac

I have not been able to sync my iPad with my pc. It runs for an hour, never gets past the backing up stage and then gives me an error message that the action could not be completed. Any suggestions?

?

Several things to try.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
Disable your firewall and anitvirus software temporarily.
 Cheers, Tom

OBIEE Action Could not be invoked

Similar Messages

Maybe you are looking for