OBIEE/ADF Integration using the Action Framework

I would like to integrate OBIEE and ADF to achieve the following.
1. Embed BI objects into an ADF application
2. Pass parameter from the ADF application to the BI objects
3. Pass context (parameters) from the BI object to the ADF components
4. Have the BI objects call JDeveloper web services from the dashboard
5. Other integration points to be developed in future
6. Combine OLTP and BI data in single ADF form
7. Source ADF BC data from OBIEE metadata layer
8. ADF application call BI alerts, actions from ADF application
Could any one have tried to integrate OBIEE and ADF to achieve any of the above.
If so please help with your experience.
Any information given shall be highly appreciated.
Regards,
Denis Ojok

you want to forward to another action without declaring that forward in the struts config? we use MVC frameworks to avoid having to write all that sort of code. what are you trying to achieve that can't be done by configuring the forward?

Similar Messages

  • References are becoming invalid when passed to an actor using the Actor Framework

    I have having an issue with passing a couple of references to an actor using the actor framework 3.0.7 (LabVIEW 2011 & TestStand 2010 SP1). 
    Some background:
    My application has three main components:
    Main VI -- is not part of any class and Launches UI Actor.
    UI Actor -- Launches the teststand actor
    TestStand Actor -- Initializes and starts teststand.
    The two references showing similar behavior (invalid reference) are the TestStand App Manager control and the "Current VI's Menubar" reference.  The App Mgr control is on the front panel of the UI Actor's Actor Core.vi.  The menubar reference is retrieved in the block diagram of the UI Actor's Actor Core.vi
    Now,
    When I run the Main VI I get an error in the TestStand Actor's Actor Core.vi (Remember Main VI launches UI Actor launches TestStand Actor) because the App Mgr and menubar references are invalid (.  I have checked and verified that in this scenario the references are valid in the UI Actor before it launches the teststand actor. 
    If I run the UI Actor's Actor Core.vi stand alone (i.e. run it top level) the App Mgr and menubar references are passed to the teststand actor, no error occurs, and the code functions as expected. 
    Why would these references be invalid by simply starting a different top level VI?  Could it have something to do with when the references are passed vs. when the front panel is loaded into memory?
    I tried putting the App Mgr control on the front panel of the Main VI and passing it to the UI Actor and then to the TestStand Actor.  This works.... 
    Anyone have any experience or knowledge to why this is occurring?

    Generally, references in LV are "owned" by the hierarchy they are first created in, and the hierarchy is determined by the top level VI. Once the hierarchy goes idle or out of memory, the references created by that hierarchy are automatically closed. That's usually what causes something like this - the reference is created in one hierarchy (let's say the main VI hierarchy) and then that hierarchy stops running.
    I don't know the AF well enough to say if that's really the case (I actually thought that it always launches a separate top level dynamic process, which I assumed is where the UI actor's core VI would always be called), but that might help explain it. If not, you might wish to post to the AF group in the communities section.
    Try to take over the world!

  • Follow up task without using the action profile

    Hi,
    Is it possible to create the follow up task without using the action profile? If so, please let me know how we can do that?
    as per the requirements, i have to the custom coding that will automatically create follow-on task triggered by status change on the all the transaction type. Please guide me how can we do that.
    Task details (task id, description), I'm reading it from the custom table.
    Thanks for your help.
    Regards,
    Vaibhav

    Thanks Naresh for the response.
    Not sure if I can use the CRMV_EVENT. Even I'm not aware how to use that. Let me tell what i am doing in the logic.
    - implementing the logic in the badi order_save (method - CHECK_BEFORE_SAVE)
    - get the header and item details using the FM CRM_ORDER_READ.
    - get the status of header / item from the output of CRM_ORDER_READ.
    - compare the status with the custom table (having info of hearder type, item type, status, tast id, task description etc)
    - if status is different, create the task using the details from the custom table.
    now i want to write the logic to implement the last step. Do we have any standard FM where I can pass the task ID and it will create the task? Please help.

  • Custom Branding Using the AJAX Framework L-Shape APIs

    Hello folks,
    i want to do this Tutorial (How To Apply Custom Branding Using the AJAX Framework L-Shape APIs) but i'm missing the source code.
    Can anyone of you provide me with the necessary files?!
    It was once located in Sap Code-Exchange (https://code.sdn.sap.com/svn/sap-portal-ajax-framework)
    Thanks in advance.
    Greetings,

    I downloaded in May 2014 two EARs with a custom AFP from SAP:
    com.customer.afp.fromscratch.ear
    com.customer.sdesign.ear
    I also have the images shown in the pdf....
    If interested, send me an email (see profile).
    Kai

  • How to use the "Actions" in Photoshop Elements 11

    I am wanting to use the "Actions" in Photoshop Elements 11.  But when I get the actions box up, it is only showing a small list of effects to use.  The tutorials I have checked into all show a very long list of actions. When I click on the little arrow and click on "load actions", I am getting nothing. Everything is blank.  It says "No items match your search."  Please help! 

    To use the existing actions, try the following:
    1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
    2. Then click on the name of the Action, in this example Faded Ink is the Action name.
    3. Then press the Play button to run the action.

  • I'm wanting to use the "Actions" in Photoshop Elements 11.  But when I get the Actions box up, it is only showing a small list of effects to use.  And no side bar to go any further.  When I click on the little arrow at top and then click on "load actions"

    I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further.  When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search".  The folder at the top does say "Actions".  How do I get more effects?  The tutorials that I've checked into all show a long list of effects in their box.  Can anyone help? 

    To use the existing actions, try the following:
    1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
    2. Then click on the name of the Action, in this example Faded Ink is the Action name.
    3. Then press the Play button to run the action.

  • What are the best practices for using the enhancement framework?

    Hello enhancement framework experts,
    Recently, my company upgraded to SAP NW 7.1 EhP6.  This presents us with the capability to use the enhancement framework.
    A couple of senior programmers were asked to deliver a guideline for use of the framework.  They published the following statement:
    "SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
    I am looking for confirmation or contradiction to the statement  "SAP does not guarantee the validity of enhancement points in future releases/versions..." .  Is this a true statement for both implicit and explicit enhancement points?
    Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
    Is there any SAP published guidelines/best practices for use of the enhancement framework?
    Thank you,
    Kimberly
    Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

    Found an article that answers this question quite well:
    [How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
    Thank you Thomas Weiss!

  • Using the Axis Framework in the SOAP Adapter

    Hello experts,
    I am currenty checking how I can easily manipulate sender and receiver details and how I could get attachments into XI.
    I saw in the sap help that it is possible to use the AXIS framework from the SOAP adapter:
    http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
    As usual, the documentation is of the same quality SAP usually provides.
    So my first question would be: This is a moduke to be used from the SOAP adapter right? I am asking because they also wirte about the AXIS adapter and its metadata.
    In oder to get it working, I created in the NWDStudio a library project, added my libraries (to the root directory) and deployed it via SDM. Deployment is succesful but its not working.
    SAPHelp says I should check for a MessageServlet - I ask myself how that could appear suddenly just by packaging some axis libraries...?
    I am using for that the ESA box (NW04s SP6) - I was not able to see whether there are some dependencies to the SP - are they?
    Thanks for your support!
    Helge

    Helge,
    Axis is outdated and has some issues ..use Apache Soap instead its much better and easy to use.
    http://ws.apache.org/soap/
    Regards
    Ravi

  • "No enought room on startup disk for Application Memory" when using the Accelerate Framework

    Dear colleagues,
    I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library  (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
    The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
    The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
    After a short while, I get the "No enought room on startup disk for Application Memory error"
    This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
    Tochnog Real Memory 6.68 GB
    System Memory  Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
    VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
    This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
    Tochnog Real Memory 1.96 GB,
    System Memory  Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
    VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
    I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
    Your help will be greatly appreciated
    Best regards,
    F Lorenzo

    The OP had posted this question in the iMac Intel forum.
    I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
    I would be interested in getting their take on this.
    Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
    As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
    In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
    My guess is that it is the combination of low available memory and low free drive space prompting this error.
    From Dr. Smoke on VM:
    it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
    https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
    This gets more to the actual intent of your question...
    EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
    Message was edited by: WZZZ
    <Hyperlink Edited by Host>

  • How to use the adapter framework sample_ra.

    hi..
    I have deployed the sample_ra adapter framework code through NWDS. Now how to use the adapter framework into my scenario.Please answer elaborately .How to call this adapter framework while configuring the communication channel.

    hi
    Follow these links I think it will helps you
    http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
    NWDS and  generate java proxy
    http://help.sap.com/saphelp_nw2004s/helpdata/en/32/43d84072378031e10000000a1550b0/content.htm
    http://msdn2.microsoft.com/en-us/library/ms944509.aspx
    thanks and regards
    santosh

  • How hard is it to use javascript to show/hide fields. Is it easier to use the action builder?

    I know nothing about javascript and all that ive been using so far has been stuff ive found on here (thank you everyone).
    Using the action builder seems like its gonna be very tedious to do since i have so many subforms that hide, would it be esier to use javascript?

    I know nothing about javascript myself but I just created a form with about 10 different subform that show or hide depending on what the user chooses from a drop down list and I used Action Builder. If we don't know javascript, how can we use it? But Action Builder did a fine job of hiding/showing wherever I needed it. And Action Builder can do more than one thing by clicking that + sign when you are building an action.
    For instance, I needed to place a button in each subform that would close both the field that the person was working in and also the subform on the next page where the information was going into floating fields in a text block that was only visible thru a drop down list text select. I could have never figured out how to do that based on my knowledge of javascript. Thank Adobe for including Action Builder in this version of LiveCycle and I use it all the time. I find it extremely easy to use but it takes a little mental training to think thru the steps of how you can use the menu in Action Builder to make your form do what you need it to do.
    And if all else fails, ask this forum. I struggle for just so long before I come here and ask for help. I always get the answer I need. I hope you will too.
    Good luck,
    Jeanette

  • How to use the action OnExpandAll on UI element Tree

    Hi, experts .
    I am in WDA developing project and developing the screen which has Tree .
    I want to expand all nodes when users click the button on the head of Tree .
    I copied the application `WDT_TREE` and created Tree of my application successfully .
    And I created the action OnExpandAll on my Tree and tried to create the function to expand all nodes .
    But I do not know how to use the action OnExpandAll .
    I can see the button to start action OnExpandAll on the head of Tree .
    I am trying to write logic in the action . But it does not work successfully .
    (In my tree , when I click the button for OnExpandAll , all nodes are outputted on root node .
    Because my logic is wrong ... )
    Please give me any hints .
    Masao

    Hi
    As your case it is a recursive node.
    then you have to create method and call it recursively for the expanall functionality.
    do it like this.
    create an attribute the node FOLDER
    name = 'ISEXPANDED'
    type = WDY_BOOLEAN.
    Now bind the property expanded of treenode FOLDER UI to this attribute.
    now go to the methods tab and create one method say name ZEXPANDALL.
    in thsi method make one importing parameter of type ( type ref to ) if_wd_context_node. and name NODE.
    then write the following code in this method.
    method ZEXPANDALL .
    DATA ELT TYPE WDR_CONTEXT_ELEMENT_SET.
    DATA EL TYPE REF TO IF_WD_CONTEXT_ELEMENT.
    data nd type ref to if_wd_context_node.
    data nds type WDR_CONTEXT_CHILD_MAP.
    data chld type wdr_context_child.
    data nf type ref to if_wd_context_node_info.
    data name type string.
    ELT = node->GET_ELEMENTS( ).
    LOOP AT ELT INTO EL.
      EL->SET_ATTRIBUTE(
      NAME = 'ISEXPANDED'
      VALUE = ABAP_TRUE
      data parent_key type string.
    EL->get_attribute( exporting name = 'TEXT' importing value
    = parent_key ).
    * create the child nodes
        create_node(
          exporting
            cur_element = EL
            parent_key  = parent_key ).
    nds = el->get_child_nodes( ).
    loop at nds into chld.
      nd ?= chld-node.
      nf = nd->get_node_info( ).
    name  = nf->get_name( ).
    if name eq 'FOLDER'.
      zexpandall(                             "recursive call
      nd
    endif.
      endloop.
      ENDLOOP.
    endmethod.
    NOw go to your eventhandler created for action expandall.
    there write the following code.
    method ONACTIONEXPANDALL .
    DATA lo_nd TYPE REF TO if_wd_context_node.
      lo_nd = wd_context->get_child_node( 'FOLDER' ).
      ZEXPANDALL( lo_nd ).
    endmethod.
    thats it.
    Thanks
    sarbjeet singh

  • Creating a custom link using the Action Wizard

    Hi everyone! I hope someone can help me.
    I would like to create an action, using the Action Wizard, to make custom links. I work with extremely large PDF documents at a major airline. I am in charge of watermarking and linking all support manuals for the airplanes. We have a custom watermark that we apply to particular pages, and also link them to updated pages on our own private server. I think the linking process could be made faster with a custom action.
    Currently I use this code:
    app.launchURL("CODE", true)
    The "code" is the web address of the document online. This works fine, however, I still have to click the link button, reposition the link, and edit the code for the particular page. Then I have to do that hundreds of times a week.
    I'd like a link action, where I can click one button and the link is perfectly drawn and placed in the exact location I require (this never changes; The link is always the same size and in the same location). I'd like this to work the same as my custom watermark action works. With my watermark action, I simply specified where the watermark went on the page, what type size, color, etc. using javascript. I'm hoping I can do the same thing with a link; Simply state what diminsions the link box needs to be and where it's located on the page.
    If this is possible, I'd be able to do both in one click; Apply my watermark with a link box already drawn on top of it. Then all I'd need to do is edit the link with the web address of the file I'm linking to.
    I hope this makes sense. Any help would be appreciated!
    Matthew~

    Okay, I'm really close to what I want. If you could help me with this one little thing, I'll be golden.
    My watermark is text that says "See Supplemental Information". I'm using a script that finds words and draws a link around them. That's perfect for me, except I need to search for the entire phrase "See Supplemental Information".
    Here is my code:
    /* LINKING */
    for (var p = 0; p < this.numPages; p++)
                        var numWords = this.getPageNumWords(p);
                        for (var i=3; i<numWords; )
                                  var ckWord = this.getPageNthWord(p, i, true);
                                  if ( ckWord == "See Supplemental Information")
                                            var q = this.getPageNthWordQuads(p, i);
                                            // Convert quads in default user space to rotated
                                            // User space used by Links.
                                            m = (new Matrix2D).fromRotated(this,p);
                                            mInv = m.invert()
                                            r = mInv.transform(q)
                                            r=r.toString()
                                            r = r.split(",");
                                            l = addLink(p, [r[4], r[5], r[2], r[3]]);
                                            l.borderColor = color.red;
                                            l.borderWidth = 1;
                                            l.setAction("app.launchURL('https://website.com', true)");
    The code works if I only search for one word, but when I try to search for a phrase, it doesn't do anything. Is there a way to search for an entire phrase like what I need?
    Thanks for all your help.
    Matthew~

  • XI - EP integration using the TREX RFC Connction

    Hi Experts,
    Is there a document on XI - TREX integration using the RFC connection. I need to build an application in EP where I would search for messages in the XI box based on certain input parameters. The search would happen using the TREX engine which in turn has indexes of all XI messages.
    Regards,
    Shobhit

    Hi Shobhit,
    In addition, check the following lings... might be helps to you...
    http://help.sap.com/saphelp_nw04s/helpdata/en/70/0837ced133304eba452c45b6047c74/content.htm
    /thread/143082 [original link is broken]
    /thread/126493 [original link is broken]
    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
    Cheers...
    Vasu
    <b>** REward Points if found useful **</b>

  • How to compile and link a C program that uses the FSEvents framework

    I've been trying to compile a program from the command line that uses the FSEvents framework. I can compile and link the code in Xcode and it runs correctly.
    At the moment I have the following command line:
    cc -Wall -g -o Watcher *.c -framework CoreFoundation -framework FSEvents
    I'm running Snow Leopard and noticed that FSEvents is not in the Frameworks directory under /System/Library as it was in Leopard.
    The link error is:
    ld: framework not found FSEvents
    collect2: ld returned 1 exit status

    I'm not sure what the point is if it builds in Xcode, but the build log should show you every command it uses throughout the process--copy and paste.

Maybe you are looking for