OBIEE Administrator login problem..

Hi all,
I Installed OBIEE 11g on windows 2008 R2 and 64 bit. I sucessfully installed and was able to login EM, Analytics, RT Decisions and other links.. I am able to create a reoprt.
I tried to login to BI Administrator aand clicked on it. I am not getting the login windows and getting the below error. It seems that it 64bit related issue. Can you please help me in resolving this?
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     admintool.exe
Application Version:     11.1.1.3
Application Timestamp:     4c5e31f4
Fault Module Name:     StackHash_f582
Fault Module Version:     6.1.7600.16385
Fault Module Timestamp:     4a5be02b
Exception Code:     c0000374
Exception Offset:     00000000000c6cd2
OS Version:     6.1.7600.2.0.0.274.10
Locale ID:     1033
Additional Information 1:     f582
Additional Information 2:     f582ef0f08c7e04d0d0ae74aea1a0cb2
Additional Information 3:     f471
Additional Information 4:     f471e93f9f6d121f3579d4abf46a5afe
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Oracle BI Administrator tool has stopped working.

Hi,
You should try the Client Only;
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
Check the README first;
http://download.oracle.com/otn/nt/bi/111130/biee_11.1.1.3_client_install_README_13_JAN_2011.pdf
Cheers,
Daan Bakboord
http://obibb.wordpress.com

Similar Messages

Administrator Login Problem

Hello,
Two weeks ago I installed a new Xserve running Mac OS X Leopard server 10.5.2. This machine runs FileMaker Pro Server v9 and MYOB File Connect. No file sharing users or any other services.
The problem: the Administrator login from on the Xserve no longer allows login. I have checked and rechecked that the correct password is being used. No luck logging into the Xserve. FileMaker Pro Server, and MYOB File Connect are running file and users are able to access these services without problems.
My question is what happened? Why can't I login to the Xserve and how do I resolve this without screwing things up and requiring and rebuild of the server?
Apple is certainly challenging my faith with Leopard Server.
Thanks for any help or suggestions.
Bryan

I had a similar problem shortly after the initial 10.5.1 install on a brand new Xserve quad core. Hadn't set up any services yet, just ran software update (including 10.5.2 update), after the restart I couldn't log in. Baffled the heck out of me. Yes, it was the correct password. Had to do a brand new install all over again.

Visual Administrator - Login Problem

hi all,
I am having problem starting visual administrator.since i am a new user here, i am provided with the user id/password ( not Administrator UID/PW ) and told that it has necessary authorizations.
when i try to start the VA by using my UID/PW and given connection paramters with the http port 55000,
Getting an error- unable to look up a connection "name i gave"
unable to lookup connection with the parameters "name i gave : port"
Lookup connection via message server - ( i chose this option while creating connetion paramters )
Direct connection to a dispatcher node
what am i doing wrong ? don't i have necessary permissions or i need to use the administrator and password ?
And we have two instances ( MD1 & MD2 ) running on the same server..how do i get the diiferent instance in VA by giving the same http port 55000 ?
I am not able to login..please help.
Addy

Nicholls,
I mentioned it wrongly..The P4 port was 55004 only..but the message server port shows only 3960.
> The Java message server port is normally 81xx, where xx is the instance number of SCS. I can't guess what that value is, but it is often 1 number higher than the CI number (in your case 50, which means SCS of 51).
The CI is 50..but why do we calculate 81xx ? And i always check the system info page only for any port information..that shows me only 3960.
Is it how we need to calculate for message port ( 81xx )...I was not knowing that..!
Now, I tried with 8151 also as per your guidance..but, no luck..:-(
Thanks!
Addy

Windows 7 Home Premium Administrator login problem

I have two user accounts on my PC (running Windows 7 Home Premium). My profile is set as "the administrators profile" and I work and save everything on this profile.
It's been working great till 2 weeks ago. I switch on the PC, it was giving the options to log into either one of the profiles, and I chose my profile as always. It then gave me an error saying: "The user profile Service Failed the logon. User profile
cannot be loaded" It doing that eversince and I just can't log into that profile.
I'm able to log into the other user account, but not being the administrator I can't access all my files or do any downloads. If I'm working in the other account and do download for instance, it will ask me for the administrators password. When entering
it, its not reacting or recognizing the password at all.
Please could you let me know how to recover the administrators profile?

Hi,
If there is another administrator account that you can log into, Please try the following methods directly:
Method 1: Fix the user account profile
Method 2: Log on to Windows and copy your data to a new account
Method 3: Delete the error SID and create a new profile
However, if you can't get to any administrator account, follow these steps:
1. Restart your computer and hit F8 multiples times until you see a menu-like screen, if you see the Windows splash screen then repeat this step;
2. Highlight and hit enter on Safe Mode with Command Prompt. Try logging in there.
3. If you are able to login, once a command prompt pops up, type:
net user administrator password /active:yes (you can specify whatever password you want for the administrator account.)
4. If you get a message saying "The command completed successfully", then restart your computer by typing: shutdown -r;
5. Boot up again pressing F8, but this time choose just Safe Mode;
6. You will be able to login as Administrator with the password you set in Step 3;
7. Then try that methods above.
For more detailed information, please refer to this article below:
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Karen Hu
TechNet Community Support

How to access the User Reports using 'Administrator' login in OBIEE 10g

Is there any way to access the reports saved in Users/'My folders' using the Administrator Login?

Hi User,
Create a new shared folder.
Provide access to all the users.
Now, ask the user who created the report in 'My Folders' to save the report in this new shared folder.
And, Delete those reports in 'My Folders'.
Now, as the report is saved in New shared folder you can access - this one.
Else--- Ask the user who created the report in my folder to make sure that it is available to all users. (Permissions - Permission should need to be provided for Administrator group)
Thank you.

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

OBIEE Administrator: bug in Physical Layer import fo Sybase IQ?

Hi!
In OBIEE Administrator, in the Physical Layer, I defined a Database Object (as a Syabase IQ 12.7) and its connection pool for a Sybase IQ 12.6 Database. I created the ODBC driver (for Sybase IQ 12.5 and also tried with IQ 12.7 drivers) in Windows and used it in the connection pool.
When I use the Import functionality, to read the tables and columns, it works fine...apparently. At least, the Physical Layer appears filled with all the tables I selected. But the "+" sign (which denotes that the table has columns, right?) appears only for some tables. And when expand those tables, the columns appear. However, for those tables (and any other table) when I right-click and select either Update Row Count or View Data, OBIEE Administrator shows an error message saying that the table does not exist:
[nQSError: 16001] ODBC Error state: S0002 code: -141 message: [Sybase][ODBC Driver][Adaptive Server IQ]Table 'EVENTS' not found.
If I edit the table properties in the Physical Layer and prefix its name with the schema name (ex.: instead of "EVENTS" I rename it to "rpt.EVENTS') it works fine...
But I only have this problem for these table of Sybase IQ. I imported tables from an SQL Server 200 database, and all works fine: a "+" sign for all tables, I select view data and it returns results, etc.
HELP!!!!
Thanks.

hi!
Problem solved. Here is the solution:
- You want to access a Sybase IQ 12.6 database through ODBC, in Oracle BI Administrator, in the Physical Layer, in order to import tabes and columns and keys and etc, don't user neither Sybase IQ ODBC driver version 12.5 nor version 12.7. Use version 12.6! :)

CF6.1: Administrator Login Failure - too many redirects

We a running CF 6.1 with a Commonspot content management system with IIS 6.0 as the web server. The CF Administrator login screen comes up and I am able to enter the password. Depending upon the browser various error messages (see below) appear that seem to indicate redirect issues between index.cfm and enter.cfm.
There are two IIS web sites (commonspot and Administration) which both have CFIDE in them. Renaming the "administrator" folder under either web site causes the CF admin page to be not found. I'm looking for any troubleshooting help. I think there is an issue between index.cfm and enter.cfm in the login process. The server is virtual so we can snap back the the original state if the new config fails.
Thank you,
Ron Deluce
Error messages:
1) Firefow 3.5.2
     The page isn't redirecting properly
     Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    *   This problem can sometimes be caused by disabling or refusing to accept
          cookies.
2) IE 8.0.3 (sits there with an apparent URL loop in the gutter window.
3) Google Chrome 2.0.172.43
This webpage has a redirect loop.
The webpage at http://dtsc-cm.dtsc.ca.gov/cfide/administrator/index.cfmhas resulted in too many redirects. Clearing your cookies for this site may fix the problem. If not, it is possibly a server configuration issue and not a problem with your computer.
Here are some suggestions:
Reload this web page later.
Learn more about this problem.
More information on this error
Below is the original error message
Error 310 (net::ERR_TOO_MANY_REDIRECTS): There were too many redirects.
4) Safari (Windows) 4.0.3
Safari can’t open the page.
Too many redirects occurred trying to open “http://dtsc-cm.dtsc.ca.gov/cfide/administrator/index.cfm”. This might occur if you open a page that is redirected to open another page which then is redirected to open the original page.

This problem happens only on a Mac machine. So it is Safari 3.2.x and upwards( inc. safari 4.x) on Mac ( Tiger or Leopard ) that this problem exists. Older version of Safari work fine.. One interesteting datapoint being this problem occurs only when we access a partner application ( which uses plsql SSO SDK). This problem does not happen for OIDDAS or Portals!!!
Any experiences you can share will be a great help...
Thanks..

Login problem after upgrade to mavericks

Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

Hi cpuman8,
Thanks for visiting Apple Support Communities.
If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
Resetting the original administrator account password
In OS X Lion or later, you can reset your user password with your Apple ID.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Best Regards,
Jeremy

EP60 Login problem.

I have a new installation of EP60 and am having a problem. When I key in the administrator id and pw in the login pane, it just redisplays the pane. I know the login information is correct because it works in the J2EE admin url.
The portal did work after the installation. I think that when we attempted to install NTLM that something was damaged.
This system is deployed on two W2K servers and the database is MSSQL.
The other point of interest is that the two servers were re-purposed for this portal and the old application was EP50. The two servers were not reimaged prior to the new install.
What traces or logs should I be looking at to help debug this problem?
thanks
Rich

I got by the login problem, it was a definition in the security definitions with in J2EE.
Now when I try to get the NTLM to work, I get the following error.
2005-12-26 15:03:07 172.18.50.195 - W3SVC1 NCSUSRASAPR11 10.4.28.61 80 GET / - 401 ncsusrasapr11.na.jnj.com Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
2005-12-26 15:03:10 172.18.50.195 NA\RAllen W3SVC1 NCSUSRASAPR11 10.4.28.61 80 GET / - 500 ncsusrasapr11.na.jnj.com Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
What is this looking for?
thanks

OBIEE Administration Tool Language Settings

Hi Everybody,
I am using Windows 7 pro German. Because of the language seetings of operating system: OBIEE administration client tool came with German language settings.
I would be glad if someone have a similar problem and can help to change it to English.
I would appreciate for help.
Best Regards

Hi,
To open the RPD in the Administration tool of a user machine you need to do the following steps:
1> Go to Control Pannel---->Administrative tools---->Data Sources(ODBC)
2> Select the System DSN tab.
3> Click Add to add the DSN for the Remote systems RPD.
4> Select the ORACLE BI SERVER option from the list of Drivers and click finish.
5> Provide the Name of the DSN and the IP address fo the remote system in the Server option in the opened window and click next.
6>Provide the ID and Password for the Remote RPD and click next.
7>It will show you the RPD to which you want to connect. Select the RPD and Click Finish.
8> Now open Administration tool in the user system and click on Open online option. You will be prompted for Different RPDs.
9> Select the RPD for which you created the DSN.
10> Give the User name and Password and you will be able to open the remote RPD.

How to add a date(Year, Month, Day) table in OBIEE Administrator

Hi,
I am new to this tool, we are developing a HR report for emp on leave or absentees. we have data since 1982 in our tables. we want to have a date table and dimension where we can give have a hierarchy for year, month, day, so that we can design our dashboards based on time. how we can do that in OBIEE Administrator and can we do it in warehouse builder as well, if so, how. ( we have a column for date in the table by name 'leave start date' and 'leave end date', can we use this and create our own table with year month and day as separate columns).
Thanks.

hi,
Using date column u can create time dim in BMM layer
Create a new logical table and pull your date column to this table
Next,create following columns
Refer http://www.rittmanmead.com/2007/04/30/obi-ee-time-dimensions-and-time-series-calculations
leave start date
Year level :Extract(year from date_column)
Month and year level:CAST (Extract(month from fact_date_column) As CHAR(5) ) || CAST (Extract(yearfrom fact_date_column) As CHAR(5) )
Mon-YYYY: EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 30 ), "Development".""."sample sales"."Dim - leave Date"."REPORT_DATE", 'MON-YY')
YYYY-MM : CAST ( EXTRACT( YEAR FROM "sample sales".""."sample"."Dim - Report Date"."LEAVE_DATE") AS CHARACTER ( 4 )) || '/' || CASE WHEN EXTRACT( MONTH FROM "sample sales".""."sample"."Dim - Report Date"."LEAVE_DATE") BETWEEN 10 AND 12 THEN CAST ( EXTRACT( MONTH FROM "sample sales".""."sample"."Dim - Report Date"."LEAVE_DATE") AS CHARACTER ( 2 )) ELSE '0' || CAST ( EXTRACT( MONTH FROM "sample sales".""."sample"."Dim - Report Date"."LEAVE_DATE") AS CHARACTER ( 1 )) END
Year Quater :: EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 6 ), "sample sales".""."sample"."Dim -Leave Date"."REPORT_DATE", 'YYYY') || '0' || EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 6 ), "sample sales".""."sample"."Dim -Leave Date"."REPORT_DATE", 'Q')
Day: EXTRACT(DAY FROM DATE_COLUMN)
Thanks,
Saichand.v

Web Center app with ADF Security - login problem

I have a custome Oracle Web Center app.
I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
and i get
Error 403--Forbidden
I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
This works fine if i use a Login link with
destination="#{'/adfAuthentication?login=true&end_url=/faces/postLogin.jspx'} "
which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
Edited by: new_to_webcenter on 18-Jan-2011 05:25

Thanks for your response Frank.
The web.xml has
<security-constraint>
<web-resource-collection>
<web-resource-name>adfAuthentication</web-resource-name>
<url-pattern>/adfAuthentication</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>valid-users</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/login.html</form-login-page>
<form-error-page>/error.html</form-error-page>
</form-login-config>
</login-config>
When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
"/faces/postLogin.jspx"
this then adds into web.xml
<servlet>
<servlet-name>adfAuthentication</servlet-name>
<servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
<init-param>
<param-name>success_url</param-name>
<param-value>/faces/postLogin.jspx</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
So the sequence which works is:
Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
So should the form be posting to j_security_check directly or to the adfAuthentication ?

IMac login problems on any 10.6 update

I have a 24" iMac that is 2 years old. After using snow leopard on my husband's new macbook I decided to get it for my imac. The base install of 10.6 works fine but of course it immediately wants to be updated to a new release. If I update it past the base install from the CD I get login problems.
What happens is that the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing. The computer will not move forward. No amount of waiting or button pushing will improve the situation.
Sometimes I could log in to another account but then it would start happening on that acocunt too. I made myself a new account and it started happening on that too. Every time if I did a re-install of the base 10.6 from the CD it went back to working fine. I would have to say no to every update of 10.6 on software update. This has been going on for 6 months. I thought maybe with 10.6.4 they fixed it but it did it again.
yesterday I did a fresh install. Thinking it was caused by my old quicken 2007 or parallels (though its v 5) or something else that has some bit that starts at login I formatted the HD , installed 10.6 fresh and installed nothing but ilife 9. I downloaded the 10.6.4 update and it still happens. I logged off my account and logged back in to test and it froze again. I am at my wits end. The only thing I saved from my old profile was my mail folder. I can find nothing else to fix. Any ideas?

SamNS wrote:
the desktop appears and the finder menu is at the top but the date and network status etc - everything from the top right of the menu bar is missing.
Do things behave better if you boot into "safe mode" by holding down a shift key while your Mac is booting?
http://support.apple.com/kb/HT1455

Simultaneous login problem

Hi
I am having simultaneous login problems. In the past I have been able to sign into my skype account on both my Mac Book Pro and my Windows 7 desktop PC. However since I had to change my password I can only login into one machine at a time now. Also when I change my password on the desktop PC I can only sign into that skype / computer. Whenever I type the same account name and same exact password on my Mac Book Pro, it says it doesn't recognize my sign-in details but I am 100% sure that I typed it in exactly the same way as I did on my desktop. Another is that when I reset my password on my Mac Book those details won't work on the Desktop PC and vice-versa.
I would like to know what is the problem in this situation, I am not sure if this is an application error or a networking error where the account details are not signing in from a different IP or MAC address.
Please and thank you!

"The load balancing was already functional:"
Do you have a description how to do that?
I Would like to know how.
"so ALL traffic, not going to the LAN network and so over this interface, went out on the DMZ interface, with source IP from LAN."
If you put the VPN servers behind 1-1 NAT instead they will use the firewall as GW and the VPN clients will get at your remote sites/LAN IF you add routing definitions in VPN config what networks are reachable through VPN.
Or you keep servers as they are but also add add more routing definitions in VPN AND static routes to each server with the firewall as gw to those remote networks. Default gw will still be through the DMZ IPs though.
The problem with more than one VPN client from behind same IP address is, with your current server settings, most likely because of the client side NAT router isn't coping with the task. Your public IP VPN server(s) should mean NAT VPN problem is at the other end (customer/client network router/firewall).
If two VPN clients behind same NAT router connected to different servers at your end, "12.34.56.80" and "12.34.56.81" (both are public IPs?) respectively I believe at least two should be able to connect.
3G/4G modems isn't an option?
Maybe try bringing your own tested working portable router (ethernet/wifi maybe includes a VPN client that connect to your servers) to the customer and put it temporarily on their LAN? There are these small new 3G/WiFi routers too. Depends on wether you need to be connected to customer LAN or not.
Try other VPN solution, SSL or OpenVPN?
Use both PPTP and L2TP simultaneously (PPTP could be troubelsome if GRE/TCP 1723 passthrough is disabled)?

OBIEE Administrator login problem..

Similar Messages

Maybe you are looking for