OBIEE and OIM

Is OBIEE compatible with Oracle Identity Management? If so, can you point me toward some documentation?
Thanks!

Let me try to state my question more clearly. Can we use Oracle Integration Manager in the same manner as we would use LDAP or External Authentication, i.e. take the login information provided by the user and compare it to a known list of IDs and passwords? If we did not have an LDAP service, and if we didn't want to use External Authentication, would Oracle Integration Manager be a possible source of that known list of IDs and passwords to compare against?

Similar Messages

  • Oam11g and oim 9.1.0.2 SSO

    anyone done sso with oam11g and oim 9.1.0.2?
    I seem to be having issue where OAM11g sessions and header variables not getting over.

    Hi,
    Can you provide more details ?
    Thanks
    GK

  • SSL setup - Weblogic 10.3 and OIM 9.1.0.1

    I am using self generated certs. I have followed all the steps in configuring SSL for OIM given in section 8.6.2 SSL Certificate Setup given in Installation and Configuration Guide for Oracle WebLogic Server Release 9.1.0.1 E14047-02.
    But when I try to perform the following step:
    To configure the trust store:
    1. Copy the supportcert.pem file to the following location on the Design Console:
    OIM_DC_HOME\java\lib\security.
    2. Open a command prompt at OIM_DC_HOME\java\lib\security and run the
    following command:
    cd OIM_DC_HOME\java\lib\security
    keytool -import
    -alias support
    -trustcacerts
    -file supportcert.pem
    -keystore cacerts
    -storepass changeit
    I don't see any folder in oim client as given above of \java\lib\security. So I created the same and followed the instructions but still the keytool.exe s not present in it. So is something missing in the document that we are not aware of? Do we have to copy the keytool.exe from BEA_HOME? I tried that too but it propped up an error saying some DLL/JAR not found.
    I found this viewlet which shows something different related to SSL setup in weblogic
    \S21880\Setup_SSL_Certificates_WLS70_61_viewlet_swf.htm
    Are the steps given in the guide enough for the SSL configuration between weblogic and oim ? or do we need to follow some other steps too ?
    Any ideas/clues/suggestions? Very appreciative.
    Many Thanks in advance.
    - oidm.

    I had a look into the xlclient.cmd file and went to the JAVA directory which is being used. And did a search for the "cacerts" and found out that there is a file named cacerts in the JAVA_HOME/jre/lib/security folder over there.
    But how does that relate to the problem of running the keytool command successfully at the right place (OIM_DC_HOME) ?
    Any hints Kevin....
    Thanks,
    - oidm.

  • OIM 11gR2: Error while starting SOA and OIM Server

    I have configured 2 OIM Applications hosted on 2 different linux hosts but connecting to one Oracle DB.
    Done OIM installation and configuration on HOST1 and it is successful.
    now while performing on HOST2,all similar steps have been followed as same on HOST1 except the Database keystore step (copied files while configuring OIM), I am encountering an error while starting SOA server and OIM server.
    Error :
    2012-10-19T11:49:07.172-07:00] [soa_server2] [NOTIFICATION] [JPS-04093] [oracle.jps.deployment] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 1350dfc6c17c1b80:336be4f6:13a7a59774c:-8000-0000000000000004,0] [APP: soa-infra] Application policy migration for application soa-infra is completed successfully.
    [2012-10-19T11:49:16.901-07:00] [soa_server2] [ERROR] [] [oracle.mds] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 1350dfc6c17c1b80:336be4f6:13a7a59774c:-8000-0000000000000004,0] [APP: soa-infra] [[
    oracle.mds.lcm.exception.MDSLCMException: MDS-01330: unable to load MDS configuration document
    MDS-01329: unable to load element "persistence-config"
    MDS-01370: MetadataStore configuration for metadata-store-usage "soa-infra-store" is invalid.
    MDS-00929: unable to look up name "jdbc/mds/MDS_LocalTxDataSource" in JNDI context
    Unable to resolve 'jdbc.mds.MDS_LocalTxDataSource'. Resolved 'jdbc.mds'
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused by: oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document
    MDS-01329: unable to load element "persistence-config"
    MDS-01370: MetadataStore configuration for metadata-store-usage "soa-infra-store" is invalid.
    MDS-00929: unable to look up name "jdbc/mds/MDS_LocalTxDataSource" in JNDI context
    Unable to resolve 'jdbc.mds.MDS_LocalTxDataSource'. Resolved 'jdbc.mds'
    Please help, thanks

    Hi
    Did you use pack and unpack command for configuration?
    Creating and Starting a Managed Server on a Remote Machine - 11g Release 1 (10.3.6)
    Regards
    Shashank k

  • OBIEE and LDAP problem

    Hi all!
    After connecting our OBIEE 11.1.1.5 to LDAP we faced with a strange problem: after one user enters the system any next user logged in has the same privileges in OBIEE as the first one.
    We turned off the following caches:
    - WebLogic Principal Validator Cache in a security realm Performance section
    - Group Membership Lookup Hierarchy Caching in our LDAP authentication provider Performance section
    But the problem still occurs. Does anyone have any suggestions on this?

    Hi I was having endless issues with OBIEE and LDAP, I followed the exact steps here:
    http://docs.oracle.com/cd/E17904_01/web.1111/e13707/atn.htm#SECMG169
    These worked for me, so you could check for a start these recommended setting are same in your environment.
    Thanks

  • Is OEM 10.2.0.5 and OIM 10.1.4.2 certified with SOA 11g

    Hi,
    Can you tell me whether OEM 10.2.0.5 and OIM 10.1.4.2 is certified with SOA 11.1.1.x, if not do we need to install/upgrade OEM and OIM to 11.1.1.x
    Please refer me some Metalink Note id's if you have....
    Cheers,
    Patel

    Hi,
    I got the answer,
    1. OEM 10.2.0.5 is not being certified with SOA 11g, but OEM 11g has been certiified with SOA 11g.....Reference Metalink Note: 412431.1
    2. OIM 10.1.4.2 is being certified with SOA 11g..... Reference: http://www.oracle.com/technology/software/products/ias/files/idm_certification_101401.html#BABHDAEG
    Cheers,
    Patel

  • Session variable filters in the integration between OBIEE and webcenter

    Hello All,
    I have a customer with the requirement to make sure that reports created in answers and containing sessions variables in filters definition will be correctly filtered once called from webcenter.
    So if an OBI report is diplayed in webcenter and contains the same type of filters (based on session variable), will the results be filtered based on the specified variable?
    In other words can we use session variables in the integration between OBIEE and webcenter?
    Thanks Olayinka

    Have you follow all the steps written here :
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e12188/T421739T475591.htm#T480640
    Do you have create the groups ?
    Do you connect as a member of the group XMLP_ADMIN ?
    Cheers
    Nico

  • OBIEE and ESSBASE federated queries..

    Hello all ,
    I am working on a requirement that requires configuring federated queries using OBIEE and Essbase as an aggregation layer. I am able to configure everything except for one dimension where this dimension in Essbase uses shared members. Any help /guidance is greatly appreciated.
    Thanks
    Sunil

    Thanks for the response. I did go further from that day on the issue. But this is where I currently am stuck.
    The issue is on this:;
    1. Have a Measure in Essbase at a Grain higher than then OBIEE grain for a dimension and I need to create a report which calculated based on both the essbae measure and the OBIEE measure.
    I have to create a report which would take the Essbase Measure, Divide by the OBIEE measure and display the value (Note: This OBIEE measure and the grain is only available at the OBIEE layer)
    Ex:
    Essbase Info:
    D1 D2 Amount
    x y 200
    OBIEE Info:
    D1 D2 D3 Percentage
    x y z1 30
    x y z2 70
    Desired Output
    Is
    D1 D2 D3 New Amount
    x y z1 60
    x y z2 140
    The behavior I am noticing is , since D3 has no relationship to Essbase Measure, the report results with a null for the Essbase Measure (Amount in this case). I understand this is natural but am not able to figure out any other means to address this requirement. I am exploring using EVALUATE and MDX, but am not sure, if I would be able to get the desired output.
    Thanks
    Sunil

  • OBIEE and Oracle Apps (E Business Suite) SSO implementation

    Hi Gurus,
    We are using apps 11i and OBIEE 10.1.3.4 . I would like to ask that is there any doc which could provide me steps of SSO implementation between both. Or if not in doc is there any body who incorporated the same. Here we dont have DAC and ETL as Informatica for etl we are using plsql. I want to make it work like when user types his id and password in Oracle E business , automatically he should be also directed to OBI also same user id and password could be used to the OBI. Please remember my OBI is not from apps package. It is EE and not OBI 7.9.6 So is it possible to implement SSO between OBIEE and apps 11i and how ?
    Thanks,

    Though this is not your complete answer, at some point this link might be of help to you if you have OBIEE hosted on Windows box.
    http://nerdsofobiee.wordpress.com/2009/10/20/obiee-sso-integration-in-windows/
    Thanks

  • OBIEE and Apps SSO implementation

    Hi Gurus,
    We are using apps 11i and OBIEE 10.1.3.4 . I would like to ask that is there any doc which could provide me steps of SSO implementation between both. Or if not in doc is there any body who incorporated the same. Here we dont have DAC and ETL as Informatica for etl we are using plsql. I want to make it work like when user types his id and password in Oracle E business , automatically he should be also directed to OBI also same user id and password could be used to the OBI. Please remember my OBI is not from apps package. It is EE and not OBI 7.9.6 So is it possible to implement SSO between OBIEE and apps 11i and how ?

    Hi Amol,
    Check for this note 555254.1 in support.oracle.com. It contains the steps to implement SSO between EBS & OBIEE.
    Regards,

  • Single Oracle Database repository to support SOA and OIM is it possible

    Hi, I'd like to install and configure SOA and OIM and would like to know if I can use one database as the repository to support SOA Suite install and OIM install ?
    In a development environment is it safe to install SOA Suite 11g and OIM 11g on the same server with all of its components? This is only for the development environment. Thanks

    Hi,
    I feel you can do it with single Oracle Database,check the below links:
    http://ofmwsoa11g.blogspot.com/p/oim-oam-ldap-oid-dip-ovd-oif-sso.html
    http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/
    Best regards,
    Rafi.

  • How to Install OBIEE and BIP on a machine with Windows XP ?

    Hi,
    I am very new to OBIEE and want to learn it by myself.
    Can I install OBIEE and BI Publisher on my home PC with Windows XP ? Can I install client and server on the same PC?
    If no, what are the other options ?
    Please help!!
    Thanks!
    Yogini

    Thanks for the link, but I am referring the same to install OBIEE.
    The pre-requisites section says :
    Client operating systems:
    - Microsoft Windows 2000 Professional with Service Pack 3 or later
    - Microsoft Windows 2003 Professional with Service Pack 1 or later (32-bit only)
    - Microsoft Windows XP Professional with Service Pack 1 or later
    Server operating systems:
    - For Oracle BI Server: Microsoft Windows 2000 Service Pack 4/2003 Server
    Thats why I wonder if I can install client and server on the same machine with Windows XP ?
    Please do let me know.
    Regards,
    Yogini

  • OBIEE and Daily Business Intelligence

    Has anyone tried merging the content of BI Apps and DBI?
    If you have, please comment on the proposed solution http://www.appsbi.com/obiee-and-daily-business-intelligence/
    Thank you
    Nilesh
    [OBIEE, BI, ERP|http://www.appsbi.com]
    Dashboards

    The BI apps which you can buy now from oracle had nothing to do with DBI.
    The BI fusion (or something) which you could buy 2 years ago or so had to do everything with DBI. (but oracle stopped with this indeed)
    it's all a bit confusing because Oracle still uses the same name.
    This was an OBIEE solution on DBI. But custimizations were not supported on this. The BI apps you can be now will support custimizations/extensibilities!
    Hope this will help you out for a bit...

  • OID and OIM Groups synchronization

    I'm using OID 10.1.0.4 and OIM 9.0.3.1 with Oracle AS.
    OID is a trusted source for OIM user reconciliation.
    Let's say, I have Group named Group1 in OID (under cn=Users container)
    I've created user group Group1 in my OIM.
    Is there any standard way to put reconciled user to Group1 in OIM right after OID's admin put user to Group1 in OID?

    Hi:
    Were you able to resolve this issue? I need to achieve same functionality but OU instead of groups. Please share your thoughts on this incase you came across a solution.
    Thanks!

  • SAP GRC v10 and OIM 11g SoD

    Hi,
    I need some information about implementing integration with SAP GRC v10 and SoD. Does anyone of you has any experience in that configuration?
    We have only base information in SAP UM Connector doc and on metalink either. Dooes anyone work with SAP GRC v10 and OIM 11g?
    best
    mp

    See if this helps:
    http://www.oracle.com/technetwork/testcontent/oimconnectordatasheet-saperp-134222.pdf
    regards,
    GP

Maybe you are looking for