OBIee Grand Total

Hi,
I am able to see the grand total in one of the calculated columns in Answers, but it is not visble in the Dashboard.
It is visible for rest of the columns.
Can you tell me why it is happening and what can I do to rectify it.
Thanks

Are you pointing to the same view on Dashboard? in which you can see that col from Answers..

Similar Messages

% is not getting correctly for the Grand Total Row in OBI10g

Hi,We have a report in table view with the following structure.
Name     Target     Act     %Ach
ABC     100     50     50
XYZ     200     10     5
Total     300     60     27.5
The value for the %Ach Total row should be 20% but in the report it is showing as 27.5.
any one observed this ,how to correct this??
Thanks

Hi,
To get grand total correctly..configure instanceconfig.xml and put..
<ReportAggregateEnabled>true</ReportAggregateEnabled> between <serverinstace>..
refer..
http://obiee101.blogspot.com/2009/09/obiee-grand-totals-with-calculated.html
Hope it solves ur problem

In OBIEE Report Grand Total instead of Average(Average) use Sum(Avg)?

Hi All,
In OBIEE Report Grand Total average always shows Average of average (Default) "avg(avg)" , can i overwrite this functionality to sum of average "sum(avg)".
Thanks in advance
Regards
Kandasamy

Hello,
You can try the following:
Remove the calculate result as setting for the three KFs.
In exception aggregation set property to average with ref char as leave start date.
Check if it works.
If the above dosent work, set reference char to emplyee ID and check.
Either one of them has to work
REgards,
Shashank
Edited by: Shashank Dighe on Apr 2, 2009 9:03 AM

OBIEE 11g - How to display Grand Total in graphs

hi ,
I am using obiee 11.1.1.6 version . In a report I have a requirement to display the grand total (present in the table) to be shown in the graph also . Kindly help.
Regards,
Niv

Hi Niv,
One quick question here.How are you creating Grand Total?
I have created using grand total by row summing and inserting that value in the Group By Function.
Attached the screen shot for your reference.
GT - Download - 4shared
Mark if helps
Thanks,

How to hide % measure column Grand Total value in Pivot View in obiee 11g?

Hi ,
I am facing a issue in obiee 11g .I am using a Pivot table to display the grand total of 3 metric columns eg: A , B, C out of which B is percentage so I need to remove the grand total value of the percentage column. We have to stick to Pivot View only. Anyone can sugest me on this?
Thanks ,
Shruti

Move B to rows section or cast to char in Criteria tab by keeping the B in Measures section only.
cast(B as char)

Unable to do Grand Total in Pivot table view in OBIEE 11g

Hello Experts,
I am totaly new for OBIEE 11g
I have created a report and wanted to do row wise total. Simple grand total in OBIEE 11.1.1.5 version. While doing the summation 'After'. I am getting a Window internet explorer Pop-up Saying the following.
"Are you sure you want to nevigate away from this page?
The changes that u made on this object has not been saved. Click cancel to return to the editor where u can save the object.
Press OK to continue or cancel to return to the page".
I tried both option, but non of the options are working.
Please provide me a solution on priority because client is on head.
Thanks in Advance.
Niraj

Hi,
Its Permissions issue.can u please try to do it outside local mechine(just open IE8 then call the server url from outside ). i hope u tried inside server pc its limited permissions for logged in users thats why its not allowing to do edit the anaysis report.
let say u have DEV/UAT servers the application installed with some other users (admin group user or power user) while u r accessing and doing devalopment better to use outside browers .
Note: i have also faced same issues (IE8 browser security level permission in win 2008 server).solution u can just try to access the url from outside server.
Thanks
Deva

OBIEE 10g - Unable to see data in the report view with grand total applied

Hi,
We're facing with a strange issue.
We're working on a report view.
We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
Please help.
Thanks in advance.
-Rama

Hi Dpk,
Thanks for your reply.
I included it in the instanceconfig.xml, but the issue still exists.
Couple of Observations
#1 - We noticed this issue when we drill down to the level which has really sparse data.
It works fine when we look at the enterprise wide report.
#2 - Works fine with few dimensional attributes and facts on the report
When we add a fact that doesn't have any value at that level, the issue starts to appear.
Thanks in advance.
-Rama

Condtional formatting on Grand Total in OBIEE 11.1.1.6.7

Hi,
We have upgraded a report from 10g to 11g and the report has pivot table which has conditional formatting set on the Grand Total level and is resulting in the following error in OBIEE11g.
“DXE compiler error. No table 'GTGT' found in DXE. Source name: DxeAPI. XML: None”
XML Snippet in 10g:
<saw:condition>
<sawx:expr xsi:type="sawx:comparison" op="notNull">
<saw:columnRef columnID="xx"/></sawx:expr>
<saw:displayFormat fontColor="#FFFFFF" wrapText="true"/>
</saw:condition>
Equivalent XML Snippet in 11g:
<saw:conditionalDisplayFormat>
<saw:formatRule>
<saw:condition>
<sawx:expr xsi:type="sawx:comparison" op="notNull">
<saw:columnRef columnID="xx"/></sawx:expr></saw:condition>
<saw:formatSpec fontColor="#FFFFFF" wrapText="true"/></saw:formatRule></saw:conditionalDisplayFormat>
Please let me know how to resolve this issue.

Hi User,
This report is corrupted. You can rebuild or re copy the xml from 10g to 11g and see if it works.
Thanks,
Amol
(Please mark this answer, if you find helpful)

OBIEE 11g Grand total issue

Hello,
I have one requirement where I want to show the data as follows
Type          Metric          Values
Type1          units          100
          Days          50
          % Calc     10%
Type2           units          100
          Days          50
          % Calc     10%
Type3          units          100
          Days          50
          % Calc          10%
Total units     300
Total Days     150
Total % Calc 30%
If I take grand total of row in pivot table, I am not able to show Total units, Total Days and Total % Calc values in Grand Total because by default, same grand total name appears.
I want to give different grand total names and percentage sign should appear in grand total.
Please let me know if u need any more information.
Thanks.

Try to recreate the report. Just in case make sure that you dont have null values in that metric or try with ifnull(col,0)
Check this bug too BUG:9871470
Keep update

Obiee 11G - Show grand total in chart

I have three measures in my table.
Measure 1 - Rolling balance from the current and previous month.
Measure 2 - PeriodRolling revenue for the last three months including current month
Measure 3 - Calculation using measure 1 and measure 2 and the number of days.
I have created all three measures in the RPD.
The table is by state. So it could be Texas, New York, Illinois and so on.
Month
State
Measure 1
Measure 2
Measure 3
1
Texas
17565
9898989
45
1
New York
97848
8748575
43
2
Texas
85768
8734874
33
2
New york
94855
3234442
23
The chart shows the trend of Measure 3 by time for each state. I need a line on the chart to show the total by month. Do I have to create a sum() formula in the RPD? Appreciate any ideas that you can throw at me.

I created a new group in the selection step and included all the states in it. That seemed to work. The Graph shows a line for grand total. Thank you for your help.
The requirement is to create a line chart. I don't think a bar would work as well here.

What is the use of Grand total level in obiee ,

hi ,
i know that we can perform drill down from one level to another level, level base measures ,aggregate atble.................
apart from that any other user if so pls give me one small example
What is the use of Grand total level in obiee

When you start to use multi-star models and none-conforming dimensions, you will use the grand total level to tell the BI Server what to do with the measures when you try and plot them all in the same answers request.
Also consider any meaure you want to perform a '% of total' you will need the total mapped somewhere, this could use the Grand total level as a level based measure.
Regards
Alastair

Grand total in Pivot view in OBIEE

Hi
I have a requirement to show a particulra report in a pivot view whereby I have to keep the yearly values in the "ROWS" portion and the monthly capex values in the "Measures" portion.
The problem is when I am using the grand total functionality, the grand total is coming only for the monthly values which have kept in the "Measures" and not for the yearly capex values in Rows portion even though the aggregation rule is set as "sum".
I have to show the grand total for the yealy capex value as well.

Raghu
I tried that option but nothing is coming out.
the requirement is as such : Pivot Table
Year - 2009
-----------Rows -------------------- ----Measure----
Capex id Act Amt. Jan feb Mar
1-5d 500 50 60 70
1-6d 600 50 50 50
Total -------------------<>-----------100 110 120
I want the Total for Act Amt. as well but its not coming

Reg : Grand Total in OBIEE

hi all,
I have two measure columns and i performed grand total on that columns .
Here, I want grand total only for one measure column (I dont want to use default aggregatio rule as none).
Any formatting options available(for eg: fill the same color for the measure as well as value for the particular column Grand Total)
Can u help on this?
Edited by: udeffcv on Apr 5, 2010 12:24 AM

If you are using Pivot table.,
try placing the measure cols(for which grand total is not needed) in the "Rows" section of the pivot table.
Regards,
Raghu

Grand total in OBIEE Answers

I have say three columns in a report, Col A that aggregates by SUM, Col B that also aggregates by SUM and Col 3 that aggregates by Avg
Col A Col B Col C
Amount Qty Avg price
10 3 3.33
20 4 5
30 7 ? Grand Total (use of report total)
I want to see Sum (col A) / Sum Col B and average of Col C where I have ?, how can I do that?

Hi,
If i got you correctly,
i think you can achieve this way.
Criteria:
Dim X, Dim Y, Col A , Col B , Col C
case i:
If Col A & Col B are Aggregated to SUM(in RPD),
then in the column formula of 'Col C',
Col A/Col B (Aggregation Rule - Default)
This gives you the SUM(Col A) / SUM(Col B) for the Grand total Row for 'Col C'
case ii:
If Col A & Col B are Not Aggregated to SUM(in RPD),
then in the column formula of 'Col C',
SUM(Col A BY Dim X, Dim Y)
SUM(Col B BY Dim X, Dim Y) (Aggregation Rule - Default)
This gives you the SUM(Col A BY all Dim X,Y values) / SUM(Col B BY all Dim X,Y values) for the Grand total Row for 'Col C'
Hope it helps you.
Regards,
Raghu

Grand Total Level in OBIEE 11g

Hi ,
I had a report with product name , order number , order quantity , order amount as columns .
Now i want add a new column at the bottom level as grand total for ordered amount.
Can some one please tell me how to do that ,,,I am in hurry
Thank you

Hi,
If you already had the aggregation rule of the ordered amount as sum, then in the table, you can enable row level summation. In the table editor, just on top of the rows section, there is a summation icon that you can click on and set the option as 'after'.
If you have already tried this thing and if it does not work then you may want to try the narrative view option. Here are steps for it.
1. Create a new column.
2. Change the function as RSUM(order quantity).
3. In the narrative view use this column as @5 (I think you already have 4 columns and hence this might be 5th column)
Hope this helps.
Thank you,
Dhar

OBIee Grand Total

Similar Messages

Maybe you are looking for