OBIEE - How pause report and jobs - feed DW by ETL

Hi Experts,
I need to known, how can i block to run reports and existings jobs, during feeding my Data Warehouse by ETL.
User could be schedule new job, but this job will be running after refresh data on DW.
Thanks.
Edited by: user9051847 on 2013-04-26 09:19

Verify your repository design and make sure that you have defined count aggregate on fact column. You would also need to define the content level of each dimension in fact table.

Similar Messages

  • How to report and verify counterfei​t products?

    If you have a suspected counterfeit Lenovo product, how do you verify it and report it to Lenovo? There should be a web site or contact number for this, but I haven't found anything.

    Hello,
    I would suggest contacting Lenovo support for the product/product line in question via phone and reporting the issue to them.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • How are reported and drafting misspellings found in a book?

    I found some spelling errors and drafting in the books I read but can not find who to contact to report them and corrected.

    You could try emailing the Publisher directly, and posting Reviews.   Apple is just a store and is not going to correct anything.  But you could bring it to their attention by using the Report a Problem link on your receipt.

  • Hyperion Reporting and Analysis - DAS, IR and Job Services Replication..

    Dear All,
    We are on Hyperion System 9.3.1 on Windows box and Repository in Oracle 10g Database. We have around 300 Interactive scheduled jobs.
    When these jobs are getting executed Hyperion Services are getting hang and In logs we are getting "Process out of memory..".
    In order to overcome "Process out of Memory.. Exiting" error. We need to replicate DAS, Interactive Reporting and Job Services on the same machine.
    I am doing Hyperion's IR, DAS, JOB Services Replication in Development environment. To achieve the same I performed the following tasks :
    # I have installed and configured Hyperion System 9.3.1 below components on MS Windows XP professional SP2 and Repository in Oracle 10g database.
    Hyperion Shared Services 9.3.1
    Hyperion Reporting and Analysis BI+ Services
    Hyperion Reporting and Analysis UI+ Services
    Every thing was configured fine.
    # To replicate the IR, DAS and Job Services. I started the Hyperion Reporting and Analysis BI+ Setup on the same machine then I select IR, DAS and Job Services.
    # Next I started Configuration Utility. Which ask me to configure Database. I selected the same database which I used for BI Services previously. Database Configuration was successful.
    # I changed the Port as below
         Core Services to 7801 instead of 6801
         Chaged the port for Job Service 7796 instead of 6796.
    # Next started Service Configurator where System was showing one more Job Service (JF2_<hostname>) in Remote Service Configurator. And in Local Service Configurator System was showing new BI and DAS. Then I configured Data Sources in DAS.
    # Started the Services.
    Next I started the Scheduled Jobs. It is taking same time as earlier. In logs it is showing that Only JF2_<hostname> Service is getting used. System is not using JF1_<HOSTNAME> anymore.
    I have few query regarding this.
    1) Why Configuration Utility didn't ask for GSM host and Port? Do I need to configure it manually?
    2) I have not chaged the port for DAS and IR Services. my concern is regarding port usage by new DAS and IR Services ? Do I need to configure it or It will be managed by system itself?
    Please show me the direction. Any help would be highly appreciable.
    Regards,
    Manmohan Sharma

    We have replicated the Hyperion Reporting and Analysis Services by changing the port number of Replicated Services to non-default port.
    Services are working fine.
    Regards,
    Manmohan Sharma

  • How to create reports and infosets in E recruiting

    Hi we are planning to create reports and infosets in E recruiting module Though I am not a developer I need to write functional designs for creating reports and Infosets.For the same I need to know what should be our approach and what all things we should keep in mind.and how creating reports and infosets is different from the ones in SAP  R/3.
    Thanks and best regards
    Rajeev

    I am sorry but your question does not seem to make much sense.
    Can you please rephrase your question?

  • EHP4 ESS Career and Job

    Hi Gurus,
    We have installed EHP4 but are not sure as to how the "Career and Job" in ESS in the Portal should look like. ie what it contains.
    We are confused between the EHP3 and 4 mix. We have tried to make sense of this via the Home Page Framework but that all seems to be a bit of a mess now with the new EHP4 objects.
    If someone could provide us with some clarity it would be very much appreciated.
    Kind regards,
    Garth

    Hi,
    You use SAP e-Recruiting 3.00 with Support Package 1, or higher.
    Before you can use the e-Recruiting applications, you have to make the following settings in the Implementation Guide (IMG):
           1.      Specify the server on which SAP e-Recruiting is installed. To do so, choose the following IMG path: Cross-Application Components u2192 Homepage Framework u2192 Resources u2192 Define Server for Resources. Enter the server name and the port of your e-Recruiting system.
           2.      Assign the server to all e-recruiting resources and add the URL parameters stored. To do so, choose the following IMG path: Cross-Application Components u2192 Homepage Framework u2192 Resources u2192 Define Resources.
    Enter the e-recruiting server for the following resources. Add the relevant URL parameters by replacing in the BSP client the 000 client with the client of your e-recruiting system.
    ¡        EMPLOYEE_CANDIDATE_APPLICATIONS_SERVICE
    ¡        EMPLOYEE_CANDIDATE_DATA_OVERVIEW
    ¡        EMPLOYEE_CANDIDATE_DIRECT_APPL_SERVICE
    ¡        EMPLOYEE_CANDIDATE_FAVORITES_SERVICE
    ¡        EMPLOYEE_CANDIDATE_PERSONAL_SETTINGS
    ¡        EMPLOYEE_CANDIDATE_PROFILE_RELEASE
    ¡        EMPLOYEE_CANDIDATE_PROFILE_SERVICE
    ¡        EMPLOYEE_CANDIDATE_SEARCH_JOBS_SERVICE.
    The support component for E-Recruiting Applications is PA-ER.

  • JOB_OPEN, SUBMIT REPORT VIA JOB, JOB_CLOSE, How to get result?

    Hi Friends,
    I am calling reports using jobs as calling job_open, submit report via job.., and job_close. But I want to the output/result of the report. How can I do this?
    Thanks.

    Hello nkara,
    Welcome to SDN!!!
    Check this thread:
    background grid
    REgards,
    Vasanth

  • How to deactivate Filter and Job in Job scheduling?

    Hi,
    My scenario is:
    XI will poll the file from 3rd party system and wil send to R/3 via IDOC adapter.
    On every sunday , R/3 will be down for 3-4 hrs for maintenance purpose.
    I need to create job scheduling in such a way that XI sould collect all the message coming on sunday during that period
    of time and after endtime has reached , it should process those message and should send the message to R/3 system.
    I have created Sender/Receiver ID ..also create Filter and a JOBID.
    while creating Job ID i specified the following
    1: Start Date    = 18.08.2009
    2:Start Time     = 11.00.00
    3:End Date      = 18.08.2009
    4:End Time      = 15.00.00
    5:Period          =  7
    6:Period Unit   = D (Days)
    Job should be scheduled at 11.00.00 and end at 15.00.00 ,filter and Job both should deactivate and after 15.00.00 it should process those messages.
    But the problem is it doesnt deactivate the filter.
    I tried using SXMS_JOB_DEACTIVATE and SXMS_START_JOB_AT_ONCE
    Both deacitvtes the JOB but not filter.
    Can any body tell me , how to go with it.
    Also if I have to write a report, what all things are required.
    regards,
    Mayank

    Hi Volker,
    Down time for R/3 is more ..so i am not sure whether XI will trying till that time or not.
    And XI is not able to than all the incoming messages in XI during that period of time will be Red Flag.
    can we write a report in XI such a way that .. all the queued messages should be processed ..thorugh Job scheduling.

  • Report and user statistics display in Obiee report

    I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically.
    The report consist following column info...
    Report Name|Report Folder|Report Path|Description|Description ID|Owner|Subject Area
    Header 1
    Header 2
    Header 3
    Header 4
    Header 5
    Header 6
    Header 7
    Header 8
    Header 9
    Report Name
    Report Folder
    Report Path
    Table
    user
    Unused ColumnIDs
    Column Created
    Report Creator (user)
    Report last modified
    like etc..........
    SO, the above said fields has to be update and provide dynamic data in the report. (Also those  field info is not available in Usage tracking table so we need get those information from Catalog manager also...........)
    For this I have one alternate idea like to get the solution by planning to get this solution by CSV file.If you would provide any solution like CSV get updated dynamically from Catalog manager it would be a great thing to me....Your help is highly appreciated.
    How to implement this requirement ............could you provide a right path to achieve this solution.
    I hope yours alternative solution.

    Thanks for the reply Yannick.
    We have install/configure WebCenter analytics and activity graph.
    Wehave added Login Metrics in our Group Space and we are getting default login count for specific time frame but when we define a filter under User Property of any property like city, department name, phone title etc after refreshing data it is giving error like
    WCS#2011.03.31.12.47.31 : Irresolvable error(s) occurred. You may want to contact Administrator with the error reference.
    Please help how to solve this.

  • How to un-group columns on my the report and how to add an export to PDF

    Hello OBIEE developers...
    So, I have this report with about 7 columns, I just submitted to my boss he came back saying "Don’t group the columns, the users typically want to see data on each row".... I am not quite sure what in the world he is talkign about, do I need to report each separate or if separate how do start that? I am sorry I am new to this area, some of my questions might be senseless..
    Also, on the same dashboard I am required to add an option where users can export the dashboard to PDF, how do I go about that?
    please help
    Edited by: 994621 on Apr 25, 2013 10:32 AM

    Sri,
    Right, may be that's what I should have said: once you've opened the dashboard then I need to export it as a dashboard. How do I that? There is a way, my predecessor was able to do it. I have a report with a print as a pdf on the dashboard with pdf icon on it (its a separate dashboard from the report) and you are able to print it as the pdf doc. I just can't figure out how he was able to do this,
    Any idea?
    Edited by: 994621 on Apr 25, 2013 2:13 PM

  • How to stop and remove an active job.

    How to stop and remove an active job.

    What sort of "job" are you referring to? A print job? If so, open the queue for the printer - it should be in your Dock, or you can access it through the Printers & Scanners system preference - and click the green Pause button to stop the entire queue, or the Pause button next to a specific print job to pause just that job. To clear a job, click the "X" button to the right of the job.
    If that's not the "job" you mean, please post back and clarify.
    Regards.

  • Non OBIEE Publisher reports and dashboards

    I have developed several Publisher reports that source data from direct SQL queries against an Oracle DB (They're not star schema reports that are appropriate for OBIEE). The reports are parameterized and direct SQL requests are used to populate the lists of values for the parameters. My task is to make them available on a dashboard.
    I have a report attached to a dashboard but I cannot figure out how to prompt for the parameters in the dashboard. Everything I've read about dashboard prompts and presentation variables assumes the report is sourced by OBIEE.
    Is there a way to do this?

    You have to create parameter in reports and as well create prompt in dashboard with same name.
    With this link, the values will be passed into report parameter.
    Use that parameter in report to filter

  • OBIEE Reports and Dashboard in Blackberry

    Hi All
    As we have a limitation with iphone we are plannning to access reports and Dashboards through Black Berry smart phone Device
    1.From which version of OBIEE this feature supports
    2.Can any one share some inputs how to integrate with Black berry device,As I want to test on Black berry simulators
    3.As per my understanding we need to have a jar file need to deploy in blackberry simulators
    4.so how we can generate a jar file for our OBIEE web url

    You can create a program with the help of the webservices.

  • Discoverer Reports and OBIEE

    Hi,
    Our Company has some Discoverer Reports and we would like to convert those reports into OBIEE. Has Oracle provided any migration or conversion utilities for this excercise? Please let us know.
    Thanks and Regards,
    -G

    Hello
    It depends how simple your workbooks are. The more complex they are the more difficult they are to migrate and some Discoverer features will be lost during the translations. Some Discoverer features will not migrate at all.
    At this moment in time, with the current state of DOMA, I am coming down on the side of starting from scratch with OBIEE. There are, in my opinion, just too many of Discoverer's nice features that will not migrate. Starting from scratch will allow you to take advantage of all that OBIEE has to offer. Migrating could limit you to what Discoverer had to offer.
    You could try a migration and see how much work there is still left to do. However, before you can do that you will need to upgrade Discoverer to 10.1.2.1 at the minimum. If you have already upgraded Discoverer to 10.1.2.1 or 11g you should be able to migrate the metadata. The only supported OBIEE version at this time is 10.1.3.4.1. After you have migrated to 10.1.3.4.1 you can then upgrade it to 11g.
    Best wishes
    Michael

  • How to run and email a report from SSIS

    Hi guys
    I need to set up an SSIS package that will run a standard report and email the results.
    I have sorted out the email side of the job, but need to know if/how I can run BPC reports from SSIS.
    Has anyone done anything similar, or have any tips/pointers?
    Thanks
    Craig

    Hi Craig,
    I have never done this, but I doubt this is something possible in a standard way, or if it's feasable, could be very difficult to set up.
    In fact, BPC works over Webservices, and it should probably be possible to use an ActiveX task inside our SSIS package and code something in VB there, referencing some API...
    In any case, why don't you use the Offline Distribution Wizard for that? It's doing exactly what you're expecting.
    Kind Regards,
    Patrick

Maybe you are looking for