OBIEE iBot delivers wrong information

Through iBot, i am able to consistently reproduce that wrong information is delivered in email when each user has different set of results.
Recipient are 5 users each having own set of permission to data. But, When iBot delivers emails, it shows data of other users in email. Is anyone aware about this issue or can please advice?
Edited by: user8337346 on Jun 14, 2012 6:22 AM

Yes, i do have data visibility as 'PERSONALIZED'. Issue is happening randomly after 4-5 iteration of same ibot been delivered and some how it is sending the data of other user from the list of recipients. can you please suggest me how to debug this? Ibot log show is almost same except the sequence of recipient is different, and couldnt figure out any differences from the log.
Edited by: user8337346 on Jun 14, 2012 10:27 AM
Edited by: user8337346 on Jun 14, 2012 10:31 AM

Similar Messages

I registered the wrong information for my iCloud account--I misspelled and now want to change it. Help is needed to delete the account and start anew.

I registered the the wrong information for my iCloud account--I misspelled the account name. I accidentally spelled blackberry instead of blackbird. How can I change this?

If you don't want to use an alias you'll have to create a new account as you cannot change the @icloud.com address once created. You'll have to create a new ID, verify the ID, then use the ID to create the new account, and migrate your iCloud data to the new account.
If you are currently syncing data with iCloud, begin by saving any photo stream photos to your camera roll as mentioned above. If you are syncing Notes with iCloud, you'll also need to open each of them and email them to yourself so they can be recreated in the new account. Finally, if you are syncing any iWork documents with iCloud, turn off iCloud syncing in your iWork app settings.
Then go to Settings>iCloud, tap Delete Account, and choose Keep on My iPhone when prompted. Then in Settings>iCloud tap Get a Free Apple ID at the bottom, set up your new ID, verify the email address you use to create it by responding to Apple's verification email, then sign in with the new ID to create your new account. Turn on your iCloud sync settings and choose Merge when prompted to upload your data to the new account. When you turn Mail to On you will be prompted to create your new @icloud.com email address. Be carefull to type it correctly as it cannot later be changed.

I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts)

I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts). I dont know how to repair this. what a nightmare

An icloud account is designed to be used by just one user. If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

Snapshot, wrong information in OCALMONTH

Hi Gurus,
We have created a monthly Snapshot following the document called: How to Handle Inventory Management Scenarios in BW
If one month the process that upload the movements from DSO to infocube is not executed (or it's executed and it fails), when we execute again the process the next month old data will be updated in the Infocube with wrong information in 0CALMONTH.(because 0CALMONTH is filled with the system date at the moment of the load).
As result, the old and new data has been added in the same month.
Do you know how to resolve this probleme? or How to avoid it?
Any feedback will be really appreciated.
Thanks

Hi David Trapote,
We also faced same problem deriving week or month from system date.
To avoid this problem, we maintained date in a table. week and month will be derived from this particular table instead of system date.
Create a simple program to update table before load starts, include this particular program in process chain after start process(before data loading). Then you can avoid these problems perminently.
Dont forget to create program with user selection for input, so you can update date accordingly.
Hope it Helps
Srini

Relation between Ibots,Delivers and BI Publisher

Hi,
I would like to know the relation between Ibots,Delivers and BI Publisher.
Any one help Please.
Thanks,
Lakshmipathi.

Tim,
Please in Contracts forums look for "Need to change OKCTERMSDS Data Source "
The third reply says
"The XML for the documents are generated by the product code using BC4J XML generation. No concurrent program is involved in it.
As regards to including additional fields from Sourcing documents into the XML generated, you can use the BC4J extension fwk to extend the ViewObject that generates XML and modify the query to include any additional fields as needed.
All the above assumes knowledge of Oracle Application Framework and the customization fwk. There is a Metalink Note (dont know the exact id) which explains how to extend BC4J objects and deploy them.
Thanks.
Juanje

Is there no way to hold the customer service department accountable when give wrong information and charged for it?

We have been loyal Verizon customers for almost a decade and have had nothing but great things to say about our service...until about 2 months ago. Two months ago my daughter moved out of state and decided to remove herself from our family plan, Before doing so, she call Verizon's customer service department to see when her contract was up. She wanted to keep her Verizon service until the end of her contract to avoid the termination fee. The service department assured her that her contract was already up and no termination fee would be charged. You can imagine my surprise when we were charged a $138 termination fee for her line on our next bill. I called customer service again and spoke with another representative (whose name I will not disclose) and was assured that the termination fee was a mistake and that I should simply not pay that portion of the bill and the charge would disappear on the next billing cycle. I did as she said and was shocked a few weeks later when I received a less than civil call from Verizon threatening to terminate my service the next day if I did not immediately pay the $138. My wife received a similar nasty message on her phone. I explained the situation to the rep on the phone, was told that the information my daughter and I received from 2 previous representatives was incorrect, and was told to pay immediately. My daughter and I went through all the proper channels to ensure no charges from termination fees, and both of us were given misinformation on 2 separate occasions. Is there any way to hold this company accountable for its mistake? I have been in sales all my life, and if an incorrect price is quoted, I have to honor the incorrect price,even if it costs me money. This is the worst customer experience I have ever had with any company, and I'm afraid that it will eventually cost Verizon not one but five long-time customers.

I shouldn't have to "chalk it up". This company, like other companies, should be held accountable for wrong information. We went through all the proper channels to ensure this wouldn't happen. I know this fee gets waived on a regular basis for a multitude of reasons. Moving nonwithstanding, I was told by two different people who had no knowledge that my daughter was moving that she owed nothing. If two different company employees tell me there will be no ETF, I will take them at their word. This should be good enough. What's the point of getting it reactivated if she can't use it where she lives now?

ITunes adds wrong information

Hey guys,
so basically im trying to manage my library because i screwed it up.
But sometimes when I click on a title or even if I just start iTunes it adds information to the titles.
Its basically a great feature, but it often adds wrong information, f.e. a wrong artist or cover.
I tried a lot of different solutions but none works.
Anyone got an idea?
Thanks

Make sure that these two options in Edit > Preferences > Store are turned off:
Then exit iTunes and open it up again. Your metadata entries should then be persistent - with these options checked iTunes will be comparing what you have with the information held in the iTunes Store, and will overwrite with the latter for Store purchases (and if you have iTunes Match). If you have any iOS devices you should also turn off Show All Music under Settings > Music.

Wrong information provided

Serial No. :- [text removed for privacy]
Product No.:- WZ040PA#ACJ
I bought a Compaq laptop for personal use, but before buying i called Compaq customer care and asked about the laptop, they suggested me Compaq 620. I inquired about the laptop they gave me the information about the system, as per the info. provided i bought the laptop on 30 Oct, for it i paid Rs. 28500 and i founded that the information provided was absolutely wrong. They just gave the wrong information about the sound, they told that it is a dual-speaker and consumer laptop but after bringing the system home i founded that its sound is very low, when i complaint it to hp technical department they told me that its a mono-speaker and commercial laptop. I complaint them that they provide me wrong information about the system and due to them i am facing problem, i ask them for a solution for the same but they just ignored everything and try to ignore my problem.I am very unhappy with these things that's why i am complaining you for the same, I want that they should change my laptop and provide me the required laptop as per my configuration.
Thank You.
Mimoh Jindal

Sir,
   On 30th october, i bought a laptop (Model:- compaq 620).Before buying i enquired about this model of laptop from your customer care, they told me all configurations including dual speakers and consumer range-laptop, after so much enquiries i purchased the same model from a authorised dealer in New Delhi. The system was sealed and was dos based, no window was their. When i brought the system to home and loaded the window, i was shocked listening the low voice of the system, so i complianed for it to your technical department but they told me that it is a commercial range-laptop with mono speaker and told me that its voice is that much only.
   So, i was misguided from your customer care and cheated for buying this product, when i told the technical department about this(misguidance and cheat), they just simply ignored all and refused to help me at all. They totally ignored the matter.
   I just want my laptop to be replaced, but the denial of your technical depratment in this regard is compelling me to go to consumer forum. I am just informing you before my this legal steps to be taken in case the further ignorance is continued.

MPLS wrong information Label

Hi
This is my first MPLS lab, I just start learning mpls basic from yesterday, All routers have fully ip reachability and ospf is activated on all routers, now my doubt is if Router 1 want to reach Router 5 loopback interface it should go via R4-->R5. but it has two entry for the route 192.168.5.0. please kindly provide me the information why it has wrong entry about 5.0 route.
R5 label range 500-599 <> R4 label range 400-499 <> R1 label range 100 199 <> R6 label range 600 699
R1#sh mpls ldp bindings 192.168.0.5 32
tib entry: 192.168.0.5/32, rev 18
local binding: tag: 105
remote binding: tsr: 192.168.0.4:0, tag: 401
remote binding: tsr: 192.168.0.6:0, tag: 605 ---->>This the wrong information R1 have in ldp database.
R5#sh mpls ldp bind
tib entry: 172.16.25.0/24, rev 4
local binding: tag: imp-null
remote binding: tsr: 192.168.0.4:0, tag: 400
tib entry: 172.16.69.0/24, rev 14
local binding: tag: 503
remote binding: tsr: 192.168.0.4:0, tag: 403
tib entry: 192.168.0.1/32, rev 16
local binding: tag: 504
remote binding: tsr: 192.168.0.4:0, tag: 404
tib entry: 192.168.0.4/32, rev 8
local binding: tag: 500
remote binding: tsr: 192.168.0.4:0, tag: imp-null
tib entry: 192.168.0.5/32, rev 6
local binding: tag: imp-null
remote binding: tsr: 192.168.0.4:0, tag: 401
tib entry: 192.168.0.6/32, rev 18
local binding: tag: 505
remote binding: tsr: 192.168.0.4:0, tag: 405
tib entry: 192.168.14.0/24, rev 10
local binding: tag: 501
remote binding: tsr: 192.168.0.4:0, tag: imp-null
tib entry: 192.168.16.0/24, rev 12
local binding: tag: 502
remote binding: tsr: 192.168.0.4:0, tag: 402
tib entry: 192.168.45.0/24, rev 2
local binding: tag: imp-null
remote binding: tsr: 192.168.0.4:0, tag: imp-null
R5#
R1#sh ip cef 192.168.0.5 255.255.255.255
192.168.0.5/32, version 25, epoch 0, cached adjacency 192.168.14.4
0 packets, 0 bytes
tag information set
local tag: 105
fast tag rewrite with Fa0/0, 192.168.14.4, tags imposed: {401}
via 192.168.14.4, FastEthernet0/0, 0 dependencies
next hop 192.168.14.4, FastEthernet0/0
valid cached adjacency
tag rewrite with Fa0/0, 192.168.14.4, tags imposed: {401}
R1#
R4#sh mpls ldp bind
tib entry: 172.16.25.0/24, rev 8
local binding: tag: 400
remote binding: tsr: 192.168.0.5:0, tag: imp-null
remote binding: tsr: 192.168.0.1:0, tag: 103
tib entry: 172.16.69.0/24, rev 14
local binding: tag: 403
remote binding: tsr: 192.168.0.1:0, tag: 100
remote binding: tsr: 192.168.0.5:0, tag: 503
tib entry: 192.168.0.1/32, rev 16
local binding: tag: 404
remote binding: tsr: 192.168.0.1:0, tag: imp-null
remote binding: tsr: 192.168.0.5:0, tag: 504
tib entry: 192.168.0.4/32, rev 6
local binding: tag: imp-null
remote binding: tsr: 192.168.0.5:0, tag: 500
remote binding: tsr: 192.168.0.1:0, tag: 104
tib entry: 192.168.0.5/32, rev 10
local binding: tag: 401
remote binding: tsr: 192.168.0.5:0, tag: imp-null
remote binding: tsr: 192.168.0.1:0, tag: 105
tib entry: 192.168.0.6/32, rev 18
local binding: tag: 405
remote binding: tsr: 192.168.0.1:0, tag: 101
remote binding: tsr: 192.168.0.5:0, tag: 505
tib entry: 192.168.14.0/24, rev 4
local binding: tag: imp-null
remote binding: tsr: 192.168.0.5:0, tag: 501
remote binding: tsr: 192.168.0.1:0, tag: imp-null
tib entry: 192.168.16.0/24, rev 12
local binding: tag: 402
remote binding: tsr: 192.168.0.1:0, tag: imp-null
remote binding: tsr: 192.168.0.5:0, tag: 502
tib entry: 192.168.45.0/24, rev 5
local binding: tag: imp-null
remote binding: tsr: 192.168.0.5:0, tag: imp-null
remote binding: tsr: 192.168.0.1:0, tag: 102
R1#sh mpls ldp bi
tib entry: 172.16.25.0/24, rev 14
local binding: tag: 103
remote binding: tsr: 192.168.0.4:0, tag: 400
remote binding: tsr: 192.168.0.6:0, tag: 603
tib entry: 172.16.69.0/24, rev 8
local binding: tag: 100
remote binding: tsr: 192.168.0.6:0, tag: imp-null
remote binding: tsr: 192.168.0.4:0, tag: 403
tib entry: 192.168.0.1/32, rev 5
local binding: tag: imp-null
remote binding: tsr: 192.168.0.6:0, tag: 600
remote binding: tsr: 192.168.0.4:0, tag: 404
tib entry: 192.168.0.4/32, rev 16
local binding: tag: 104
remote binding: tsr: 192.168.0.4:0, tag: imp-null
remote binding: tsr: 192.168.0.6:0, tag: 604
tib entry: 192.168.0.5/32, rev 18
local binding: tag: 105
remote binding: tsr: 192.168.0.4:0, tag: 401
remote binding: tsr: 192.168.0.6:0, tag: 605
tib entry: 192.168.0.6/32, rev 10
local binding: tag: 101
remote binding: tsr: 192.168.0.6:0, tag: imp-null
remote binding: tsr: 192.168.0.4:0, tag: 405
tib entry: 192.168.14.0/24, rev 4
local binding: tag: imp-null
remote binding: tsr: 192.168.0.6:0, tag: 601
remote binding: tsr: 192.168.0.4:0, tag: imp-null
tib entry: 192.168.16.0/24, rev 6
local binding: tag: imp-null
remote binding: tsr: 192.168.0.6:0, tag: imp-null
remote binding: tsr: 192.168.0.4:0, tag: 402
tib entry: 192.168.45.0/24, rev 12
local binding: tag: 102
remote binding: tsr: 192.168.0.4:0, tag: imp-null
remote binding: tsr: 192.168.0.6:0, tag: 602
R1#
R6#sh mpls ldp bind
tib entry: 172.16.25.0/24, rev 14
local binding: tag: 603
remote binding: tsr: 192.168.0.1:0, tag: 103
tib entry: 172.16.69.0/24, rev 4
local binding: tag: imp-null
remote binding: tsr: 192.168.0.1:0, tag: 100
tib entry: 192.168.0.1/32, rev 8
local binding: tag: 600
remote binding: tsr: 192.168.0.1:0, tag: imp-null
tib entry: 192.168.0.4/32, rev 16
local binding: tag: 604
remote binding: tsr: 192.168.0.1:0, tag: 104
tib entry: 192.168.0.5/32, rev 18
local binding: tag: 605
remote binding: tsr: 192.168.0.1:0, tag: 105
tib entry: 192.168.0.6/32, rev 6
local binding: tag: imp-null
remote binding: tsr: 192.168.0.1:0, tag: 101
tib entry: 192.168.14.0/24, rev 10
local binding: tag: 601
remote binding: tsr: 192.168.0.1:0, tag: imp-null
tib entry: 192.168.16.0/24, rev 2
local binding: tag: imp-null
remote binding: tsr: 192.168.0.1:0, tag: imp-null
tib entry: 192.168.45.0/24, rev 12
local binding: tag: 602
remote binding: tsr: 192.168.0.1:0, tag: 102

Hello,
the show mpls ldp binding shows the label to IP prefixes advertisement of every LDP neighbor either upstream (nearest to the prefix) either downstream (more far from the prefix).
The binding via R6 so is a correct binding but it is not used by local node R1 to reach 192.168.0.5/32.
As the sh ip cef shows there is actually a single best path to the destination that is in the direction of R5.
R1#sh ip cef 192.168.0.5 255.255.255.255
192.168.0.5/32, version 25, epoch 0, cached adjacency 192.168.14.4
0 packets, 0 bytes
tag information set
local tag: 105
fast tag rewrite with Fa0/0, 192.168.14.4, tags imposed: {401}
via 192.168.14.4, FastEthernet0/0, 0 dependencies
next hop 192.168.14.4, FastEthernet0/0
valid cached adjacency
tag rewrite with Fa0/0, 192.168.14.4, tags imposed: {401}
R1#
So you don't need to care about the additional entries in show mpls ldp binding.
Hope to help
Giuseppe

IBot Chaining in OBIEE 10g Delivers

Hello Experts,
I'm trying to utilize Delivers/iBot Scheduler to create the following scenario:
I have 5 iBots and I want to create an 'iBot Chain' that starts another iBot once the original iBot has finished e.g.
1) iBot 1 starts at 10:00AM, finishes at 10:05AM
2) iBot 2 starts at 10:05AM , only after ibot 1 has finished. iBot 2 finishes at 10:10AM
3) iBot 3 starts at 10:10AM, only after iBot 2 has finishes
etc etc
I've tried creating this scenario by going into iBot 1 - > Advanced Tab -> Add Action -> iBot but iBot 2 is not starting as planned.
Does anyone have any suggestions on how to accomplish the above scenario?

askjohnobiee wrote:
Hello Experts,
I'm trying to utilize Delivers/iBot Scheduler to create the following scenario:
I have 5 iBots and I want to create an 'iBot Chain' that starts another iBot once the original iBot has finished e.g.
1) iBot 1 starts at 10:00AM, finishes at 10:05AM
2) iBot 2 starts at 10:05AM , only after ibot 1 has finished. iBot 2 finishes at 10:10AM
3) iBot 3 starts at 10:10AM, only after iBot 2 has finishes
etc etc
I've tried creating this scenario by going into iBot 1 - > Advanced Tab -> Add Action -> iBot but iBot 2 is not starting as planned.
Does anyone have any suggestions on how to accomplish the above scenario?The better thing to do if you want help is to give us your scenario. What did you do in each tab in delivers? I have plenty of suggestions, but have no idea which ones apply to you. Don't make it hard for us (i.e, make us describe in detail every step that must be done, what to check, etc.). Rather, give us all your settings. Then we can look at it and tell you what you might be missing or doing wrong.
Please try again.

IBots - Delivers: Selected Users and E-Mails based on SA_SYSTEM table

Hi
I have the following request and I am having issues with the setup.
1) A report request that has a columned named Assigned to:
2) Setup Scheduler
3) Need to create an ibot to generate the report from step 1 and email it to selected people
4) Setup SA_SYSTEM table with user information.
a) This does work with reference to updating delivers information when I look at My Account
5) Now I am attempt to do the following:
1) The report listed above will generate a report that has many records that belong to different Assigned To people
2) I would like to have the iBot generate the report(s) based on the Assigned To and that report only have that persons records in that specific report
3) The iBot would have to generate several reports based on the Assigned to
4) Automatically email the report to the correct person based on the email address setup in the SA_SYSTEM table that I created
--- This system table is also been added to the Presentation Layer of the RPD file
5) The users WILL not be subscribing to the ibot
6) The user may never log into OBIEE ... Just receive reports from the iBot
Questions:
1) Has anyone ever done this?
2) Can I do this
3) Can someone help me out
Other things I have done.
1) I have created a simple iBot to create the report... But is has all records
2) I can email the report to "Me"
3) I does run on a regular scheduled basis
Thank for any help
Steve

Rudimentary automated PDF generation using Delivers Hi Steve,
When the iBot runs in personalisation mode it is in essence logging each user into the system. The user that runs the report e.g. Administrator will impersonate the users one by one and run the queries per user. If you are not able to populate the Authentication block you will need to do something a little more "out there" to achieve your goals.
I have submitted a post a couple of days ago explaining a rudimentary method to generate customised pdf's based on session variables when running as a single user. You could modify this approach to achieve your desired result.
Rudimentary automated PDF generation using Delivers
Regards
Chris
Edited by: ChrisMarais on 23-May-2011 20:46

Obiee 10g delivers cannot send mail

hi i have tried to send mail to the user
i have also disabled the firewall
in the cmd i have checked
TELNET SMTP.GMX.COM 587
220 mail.gmx.com GMX MAIL SERVICES ESMTP {mp-eu002}
i have also checked the ibots log file
+++ ThreadID: 25dc : 2012-02-14 00:46:22.244
iBotID: /users/administrator/_ibots/my new ibot/my new request
[nQSError: 75006] Failed to send MAIL command. 5.7.0 Need to authenticate via SMTP-AUTH-Login {mp-eu006}
+++ ThreadID: 25dc : 2012-02-14 00:46:22.247
iBotID: /users/administrator/_ibots/my new ibot/my new request
Exceeded number of delivery retries.
ho to resolve the issue

hi follow this
gmx is providing free smtp server just create an id with gmx and in the job manager give the details in the mail tab
http://gerardnico.com/wiki/detail/dat/obiee/bi_scheduler/obiee_scheduler_configuration_mail.jpg?id=dat%3Aobiee%3Ascheduler_mail_configuration_*
give the credential like this
senders address: [email protected]
SMTP server:SMTP.GMX.COM
smtp port:587
check the option authenticate against smtp server
username:[email protected]
email password:XXXXXXXXX
after that restart presentation services and bi scheduler
if u have antivirus and firewall installed on ur pc disable it both
in the cmd type this telnet smtp.gmx.com 587
check whether you can communicate with the server if it doesnot pop up with any message host cannot connect then you ca send mail 2 you user wch u have assigned in you delivers..
hope you got it any doubts send me a reply
all the best

Unable to open Obiee IBOT pdf file

Hi,
The IBOT was sending the file in PDF format through mail, while i tried to open the file its showing the popup message " The Adobe Reader couldnt open the file xx.pdf file, because it is either not a supported file or because the file is being damaged."
While other formats are able to open, the obiee version iam using is 10.1.3.4.1
Thanks and Kind Regards.

[discussion moved to Acrobat Installation & Update Issues forum]

OBIEE 10g Getting wrong results when adding calculated columns to a report

Hi,
I'm experiencing a possible misbehaviour with OBIEE 10g (10.1.3.4.1).
I have a simple report with a table. Columns are simply selected from dimensions and facts. In this case the generated query is:
WITH
SAWITH0 AS (select sum(T30604.TOTAL_TIME) as c1,
sum(T30604.MATERIALS_QTT_COST) as c2,
sum(T30604.AMNT) as c3,
sum(T30604.QNTY) as c4,
T30622.BRANCH_CODE as c5,
T25064.SRP1_CODE as c6,
T25064.SRP1_DESC as c7,
T25064.SRP2_CODE as c8
from
THK_BRANCHES T30622,
THK_ITEMS T25064,
THK_INVENTORY_TRANSACTIONS T30604
where ( T25064.ITEM_ID = T30604.ITEM_ID and T30604.BRANCH_ID = T30622.BRANCH_ID )
group by T25064.SRP1_CODE, T25064.SRP1_DESC, T25064.SRP2_CODE, T30622.BRANCH_CODE)
select distinct SAWITH0.c5 as c1,
SAWITH0.c6 as c2,
SAWITH0.c7 as c3,
SAWITH0.c8 as c4,
SAWITH0.c4 as c5,
SAWITH0.c3 as c6,
SAWITH0.c2 as c7,
SAWITH0.c1 as c8,
SAWITH0.c4 as c9,
SAWITH0.c3 as c10,
SAWITH0.c2 as c11,
SAWITH0.c1 as c12,
SAWITH0.c4 as c13,
SAWITH0.c3 as c14,
SAWITH0.c2 as c15,
SAWITH0.c1 as c16,
SAWITH0.c4 as c17,
SAWITH0.c3 as c18,
SAWITH0.c2 as c19,
SAWITH0.c1 as c20
from
SAWITH0
Results of this report / query are correct.
I then add a simple calculation (subtraction between two fields). The generated query is:
WITH
SAWITH0 AS (select sum(T30604.MATERIALS_QTT_COST) as c1,
sum(T30604.AMNT) as c2,
T30622.BRANCH_CODE as c3,
T25064.SRP1_CODE as c6,
T25064.SRP1_DESC as c7,
sum(T30604.TOTAL_TIME) as c8,
sum(T30604.QNTY) as c11,
T25064.SRP2_CODE as c12
from
THK_BRANCHES T30622,
THK_ITEMS T25064,
THK_INVENTORY_TRANSACTIONS T30604
where ( T25064.ITEM_ID = T30604.ITEM_ID and T30604.BRANCH_ID = T30622.BRANCH_ID )
group by T25064.SRP1_CODE, T25064.SRP1_DESC, T25064.SRP2_CODE, T30622.BRANCH_CODE),
SAWITH1 AS (select D1.c1 as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c8 as c8,
D1.c9 as c9,
D1.c10 as c10,
D1.c11 as c11,
D1.c12 as c12
from
(select sum(SAWITH0.c1) over (partition by SAWITH0.c3) as c1,
sum(SAWITH0.c2) over (partition by SAWITH0.c3) as c2,
SAWITH0.c3 as c3,
sum(SAWITH0.c1) over (partition by SAWITH0.c6, SAWITH0.c3) as c4,
sum(SAWITH0.c2) over (partition by SAWITH0.c6, SAWITH0.c3) as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
sum(SAWITH0.c8) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c8,
sum(SAWITH0.c1) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c9,
sum(SAWITH0.c2) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c10,
sum(SAWITH0.c11) over (partition by SAWITH0.c6, SAWITH0.c12, SAWITH0.c3) as c11,
SAWITH0.c12 as c12,
ROW_NUMBER() OVER (PARTITION BY SAWITH0.c3, SAWITH0.c12 ORDER BY SAWITH0.c3 ASC, SAWITH0.c12 ASC) as c13
from
SAWITH0
) D1
where ( D1.c13 = 1 ) ),
SAWITH2 AS (select sum(T30604.MATERIALS_QTT_COST) as c1,
sum(T30604.AMNT) as c2
from
THK_INVENTORY_TRANSACTIONS T30604)
select SAWITH1.c3 as c1,
SAWITH1.c6 as c2,
SAWITH1.c7 as c3,
SAWITH1.c12 as c4,
SAWITH1.c11 as c5,
SAWITH1.c10 as c6,
SAWITH1.c9 as c7,
SAWITH1.c8 as c8,
SAWITH1.c10 - SAWITH1.c9 as c9,
SAWITH1.c11 as c10,
SAWITH1.c10 as c11,
SAWITH1.c9 as c12,
SAWITH1.c8 as c13,
SAWITH1.c11 as c15,
SAWITH1.c10 as c16,
SAWITH1.c9 as c17,
SAWITH1.c8 as c18,
SAWITH1.c11 as c20,
SAWITH1.c10 as c21,
SAWITH1.c9 as c22,
SAWITH1.c8 as c23,
SAWITH1.c5 as c26,
SAWITH1.c4 as c27,
SAWITH1.c2 as c28,
SAWITH1.c1 as c29,
SAWITH2.c2 as c30,
SAWITH2.c1 as c31
from
SAWITH1,
SAWITH2
Results of this report / query are wrong: it seems as if some rows "disappear".
If I delete the filter in SAWITH1 query above ( D1.c13 = 1 ) results are correct.
Anyone experiencing the same problem? The strange thing is that I have a number of similar reports (on other subject areas) and everyting is working fine.
Please also note that I don't want to add this kind of calculated items in the RPD (they can be simple calculations that are made on-the-fly).
Any help would be greatly appreciated.
Thanks a lot and regards,
Cristina

I have the same issue, everything OBIEE server generate query using ROW_NUMBER() over () function, it will hardcode Dx.cx = 1, this will cause issue if you have rows of the same distinct value, thus causing missing rows and the final results will be wrong.
I have open a SR with Oracle Support since March 2011, but till today, they have not resolve the issue yet.
Hope they solve the issue soon.
Best Regards
KT

OBIEE iBot delivers wrong information

Similar Messages

Maybe you are looking for