OBIEE Installation (Basic) on IIS

Hi Experts,
Recently I have tried to install OBIEE on IIS. In the Installation Guide, I found the following instructions:
To deploy Oracle BI Presentation Services and Plug-in with Microsoft IIS
+1 Choose Advanced or Basic installation type.+
+2 After you select the components to install, and if Presentation Services or Presentation Services Plug-in are selected, you are prompted to select the application server.+
- Select Microsoft IIS.
-- The ISAPI plug-in is installed in IIS.
+3 When the Basic installation type is selected, the installer installs a stand-alone version of OC4J+
and deploys Oracle BI Systems Management and Oracle BI Publisher in this container.
However when I install OBIEE with Basic installation type, there is no step to select the Application Server.
Has anybody encountered similar problem,
Thanks!
MB

@John
Thanks for the link. I had already seen it before and it had been very helpful.
However my question was more about the Installation itself (not about moving the container).
@wildmight
I installed OBIEE once again on the clean WinServer with IIS up and running and there is an option to choose to install it in IIS.
I guess my previous installations were done on WinServer without IIS.
Thanks for your help,
MB

Similar Messages

Basic or Advanced OBIEE installation

We are trying to installed Advanced OBIEE question: Are we able to use the Web logic Server instead of the Oracle Application Server to perform the Advanced Installation type for OBIEE. We are using Weblogic 10.3, OBIEE 10.1.3.4
During a i am getting this message
■ You are evaluating the Oracle Business Intelligence product.
■ The Web Server is a J2EE Application Server other than Oracle Application Server.
■ Choose the Advanced Installation type when deploying Oracle BI with Oracle Application Server
If you plan to perform an Advanced Installation, Oracle Application Server (version 10.1.3.1.0 or
later) must be installed before you run the Oracle Business Intelligence installer.
Lastly, what is the difference between basic and advanced installation.

Hi,
I think you need to go ahead with Basic installation(which has OC4j as application server). Now after your OBIEE installation is complete you need to install right version of Weblogic and deploy the analyitcs.war file and BI publisher war file (if needed) so that applications would be created on you application server. Once this is done you are good to use OBIEE which would be running on weblogic server as an application listening on the port you configured.
Hope this helps
Regards,

OBIEE installation drive

Hi all,
Everything was working fine for me till yesterday....
Yesterday i tried to write a java program with the help of following [link to write java application| http://oraclebizint.wordpress.com/2008/01/04/oracle-bi-publisher-101331-creating-applications-using-jdeveloper-11g-and-web-service-soap-apis/]
succesfully created the java application.
But today, when I try to open the reports in BIP I am getting error message given below,for all the reports. Except the last file name in the error message 'xdo_070309_124949014_rtf_out.xsl' is different for each report.
I believe that some config file got edited and bip is searching the required file in different OBIEE installation folder.
OBIEE is installed in C drive and the path C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\ is very much valid when in the error message it is telling that D:\..\..\... is invalid.
Please help me in the issue.
Error meassage when trying to view any report in BIP.
D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\xdo_070309_124949014_rtf_out.xsl (The system cannot find the path specified)
Thanks in Advance.
ESSPEE
Edited by: esspee on Jul 3, 2009 1:09 PM

Problelm solved.
i had kept xdodebuf.cfg file in the location D:\Program Files\Java\jdk1.5.0_03\jre\lib for debug purpose.
the log path in the file was LogDir=D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp
where it should have been written as LogDir=C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp since OBIEE in my system is installed in C drive.
Thanks
ESSPEE
Edited by: esspee on Jul 3, 2009 2:05 PM

OBIEE Installation Problem

Hi
I installation process, " *Please Specify a location for a valid JDK Installation*" error is coming. In my system java version 1.6.0_26-b03 is available. I was given the enviroment variable of CLASS_PATH,JAVA_HOME,PATH.
Same path java programm is working fine, but the same path was given in OBIEE installation above said error is coming.
Can you please guide and solve this problem.
Regards
M.Padmanabhan

Hi,
You must have a folder like the following : C:\Program Files\Java\jdk1.6.0_11 (Java Development Kit)
If not you can dowload a jdk and install from here :
http://www.oracle.com/technetwork/java/javase/downloads/java-se-jdk-7-download-432154.html
Regards
Adil

OBIEE Installation

Goal : TO install OBIEE on Solaris 11 Zone3
Current environment
OS : Oracle Solaris 11
Global Zone
Zone1 - Oracle DB 11g
Zone2 - Weblogic Server
Zone3 - OBIEE Server - to be installed
While installing OBIEE, installation got terminated with DB connectivity error. Tried to install Oracle 11g client and terminated with error message on packages. According to the client installation guide below listed packages are missing in zone 3 and global zone. Please advise the way ahead.
SUNWsprox
SUNWi1of
SUNWi1cs
SUNWi15cs
SUNWxwfnt
Thanks in advance.
Sheen

Hi Kam,
First of all it's a pleasure to help! That being said, if you think I've correctly answered all your questions, it'd be great if you'd reward "Correct" and/or "Helpful" points for my participation.
Secondly, after installing the components properly, you will get one development application,although, I'm not sure if it is IDE compliant. There really isn't a true debugger component, however, it does have a compiler that will throw errors and you'll have to do some leg work to figure out what is the root cause and fix it.
The only setup.exe file you should be concerned with is in the Server folder. Ignore the others.
Good luck!
-Joe

Sharing reports across different OBIEE installations

Hello,
Is there a way to import/export reports from/to different OBIEE environments?
We developed a number of Answers reports, and would love to share them with our counterparts who have their own OBIEE installations. The problem is that our environments differ and our repositories differ as well (.rpd file). Some of us are running Windows, others are running Linux; some use Oracle, others SQL Server, or even Microsoft Access.
We tried copying the xml and corresponding .atr files from the catalog in one environment to the catalog in the other, but we quickly found out that the reports fail due to different configurations (missing tables, unknown users, problems with permissions, etc.)
Any help or ideas will be greatly appreciated.
Thank you very much.
-sb

Hello,
Thank you for your response.
I am replying to my own original post now. You are right, I was asking for the impossible -- it was late on Friday, and I must have been really tired when I submitted my original post.
The problem I needed to solve was this. Someone gave me Microsoft Access database, the .rpd file and the .xml and .atr files for the Answers reports. My job was to make those reports run in my environment, which is Oracle on Linux. I have finally made it work, but I did have to make changes in the .rpd and add a TNS entry before this started to work. Since there was a change in the physical layer, I had to recreate the BM layer to generate the correct mappings. Then I was able to simply copy and paste the presentation layer from the .rpd that was given to me.
Again, thank you very much for your response.
-sb

Seperate OBIEE installation and Weblogic Installation

Hi,
Our requirement is to setup the HA system in the Production for the OBIEE. We have Admin server as active-passive on the 2 OBIEE instances.
We trying to setup the high availability of the Admin server as per the Oracle Enterprise Deployment guide. If I setup that and manually failover the Admin server the user cannot login if the Admin server is migrated to second application server.
So our next option is to install the weblogic on the NAS shared storage and scale out the OBIEE components on the 2nd Application server so that Active-Passive Admin server can access the same settings on the shared storage. So the question is it possible to separate the weblogic and OBIEE installation directories separately in order to achieve high availability.
Thanks:
Apurv.

The URL will be exactly the same as a Windows installation but will have your Unix server name. You will need to learn how to start and stop the OBIEE services and OC4J in Unix. This is pretty well documented on the Infrastructure Installation and Configuration Guide.

What is function of IIS server in OBIEE installation

I have added new presentation column in presentation layer. but I could not see this new column in presentation services(Answers) after refresh column.
Can anyone let me know the problem behind this?
Thanks

Hi,
Restart both the Services and check it out in answers.
Thanks

OBIEE installation on Windows 7 64-bit OS

Hi All,
I want to install Oracle Business Intelligence 10.1.3.4.0 on Windows 7 64-bit OS can you suggest me things that i have to consider in this,
like :-
a) JDK 32/64 bit.
b) ODBC drivers for Oracle 32/64 bit.
any other driver or special consideration which I need on 64-bit OS.
I am curious about it and im going to install it on this weekend.
and if possible can i get other links from where i can get useful information related to this.
Please Help.
-Jagdeep Singh

Hi Mr. Singh,
If you have installed OBIEE successfully on win 7, please guide me with the installation steps that you have followed to install Oracle DB 10g/11g and OBIEE 10.1.3.x on windows 7 Home edition, 64 bit os?
My personal id: [email protected]
Thanks in advance,
Mili

Accessing the files in OBIEE deployment folder. IIS vs OC4J

Hi,
I want to access the files like CSS in the OBIEE deployment folder.
I know how to access the files in the deployment folder when the application is hosted on IIS.
For Example:
I have Hosted a .net application on IIS.
The application deployment folder is sampleApplication. The URL will be something like - http://localhost/sampleApplication/samplePage.
And if i have a CSS file under Styles folder in sampleApplication folder, the file can be accessed Like - http://localhost/sampleApplication/Styles/style.css.
I want to do the same for OBIEE hosted on OC4J. I want to access the CSS files through the URL.
Where will be the CSS files and How will they be accessed through the URL.
Http://localhost:9704/..??
Thanks in advance.

I found that filenames are case sensitive on the iphone but not on the simulator so check that.

Error at step 14 of 15 obiee installation

Hi all,
I have installed obiee 11.1.1.7 and get a problem at configuring bi domain step, and the error is :
FAILED_TO_APPLY_CHANGES
Detail Message: Timeout; Waiting for all managed servers to push configuration changes; [180 secs]; bi_server1
is there anything I had to configure?
thanks for help

Hi Della,
I read the Complete thread of ur error.
ECC 6.0 sujjests to go with up to jdk 1.4_12 version
If ur GUI disappears, U can call the Task Manager by pressing CtrlAltDelete
then there U can see the Installation Process in Application Tab,Right Click on the Process & Maximize
I hope this will resolve ur GUI disappearing Problem
For the Error in Importing the 14th ABAP Job
Press Ok in the Popup appears & this'll stop the Installation Process.
After stopping the Installation.
Go to Run->put services.msc -> there U stop the Oracle Services in the Automatic mode
then Restart ur system
login to ur system as sidadm (sid = System ID .for Eg: DEV is the system ID u've used in Installation)
& the password u have given at the time of Installation.
then go to cmd prompt again->type sqlplus "/as sysdba" or sydba
then u'll b inside SQL> type start
Go to another Cmd prompt->put services.msc -> type lsnrctl
Go to Run->put services.msc -> there U can see the status of the Oracle Service
Right Click on Oracle10ListenerCtrl -> start it.
then by pressing Ctrl+C u'll b able to come out of SQL & Listener Ctrl.
type EXIT to come out of the cmd prompt.
then Start the Installation Again & Continue with the Previous Installation.
Then the Installation'll finish Successfully after few hours.
I hope this'll sure resolve ur Problem.
Rewarding with points'll boost the Interest of the Resolving Person.
Regards,
Mohamed Meeran

OBIEE installation error: file EmctlCommon.pm.template not found

I'm installing OBIEE 11.1.1.6.0 on Linux Centos.
I have this error running the installer
"/app/MiddlewareOracle/middlewarehome/oracle_common/bin/EmctlCommon.pm.template not found"
/app/MiddlewareOracle/middlewarehome is my installation home directory.
I don't understand why installer did not copy/unzip this file in oracle_common.
I don't think it's a permission issue: there are other files in the directory.
Log simply report the error with no further information.
Some advice?
thanks
Luca

Sorry
Probably the error was due to an error during the unzip of files downoladed from Oracle.
Solved.

OBIEE Installation Error

Hi All,
I have installed OBIEE in My stand alone machine, after installaing prerequisites like Oracle 10g, JDk.Also Enabled IIS before installition. After installition of OBIEE succesfully, iam unable to launch OBIEE administration. When i clicked that administration, one CMD prompt window is opening and some error like exe.error(i don't know exactly) is coming with ok button. When i click that button the CMD prompt window is closing. Plz help me out from this problem
Nath

Try asking in the BI forums:
http://forums.oracle.com/forums/category.jspa?categoryID=16
Axel

Oracle Business INtelligence -installation, basic doubts

can i shoot oracle BI installation related basic doubts, and other issues that may arise in this forum ???

if it's enterprise edition.. you can post here..
Business Intelligence Suite Enterprise Edition

OBIEE installation in AIX 5.3

Hi all,
I am trying to install OBIEE 10.1.3.4 on AIX 5.3
Installation is completed without any error,but at the time of bringing up oc4j I am getting following error
[orabi@EKKTSM:/oraobi/OracleBI/setup] oc4j -start
Starting OC4J from /oraobi/OracleBI/oc4j_bi/j2ee/home ...
WARNING: Unable to access loaded classes.
2010-06-08 08:07:16.130 NOTIFICATION JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
2010-06-08 08:07:16.139 NOTIFICATION JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
10/06/08 08:07:18 WARNING: Application.setConfig Application: javasso is in failed state as initialization failed.
java.lang.NullPointerException
2010-06-08 08:07:18.971 WARNING J2EE OJR-00013 Exception initializing deployed application: javasso. Application: javasso is in failed state as initialization failed
2010-06-08 08:07:19.100 NOTIFICATION SAROOTDIR From System Property=/oraobi/OracleBI/systemsmanagement/resources//attribute-definitions.xml
2010-06-08 08:07:19.102 NOTIFICATION Attribute file location is /oraobi/OracleBI/systemsmanagement/resources//attribute-definitions.xml
2010-06-08 08:07:19.398 ERROR J2EE OJR-00010 Exception starting HTTP server: default-web-site.xml, EKKTSM:9704, error: The socket name is already in use.
10/06/08 08:07:19 Error initializing server: Unable to start HTTP-Server. default-web-site configuartion may not be valid.
2010-06-08 08:07:19.412 NOTIFICATION PERFORMANCE MONITOR Directory Location =/oraobi/OracleBI/systemsmanagement/resources/performance
2010-06-08 08:07:19.420 NOTIFICATION Found performance file :/oraobi/OracleBI/systemsmanagement/resources/performance/perf_OracleBIPresentationServer.xml
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
INFO: In PerfDllJNI with DOM Elementoracle.xml.parser.v2.XMLElement@22ae22ae
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
INFO: PERFMON Open function is: PerfMon_Open
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
INFO: PERFMON Collect function is: PerfMon_Collect
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
INFO: PERFMON Close function is: PerfMon_Close
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
INFO: Calling LoadLibrary for perfjni
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
SEVERE: Exception occured while loading JNIDLL: perfjni with java.library.path = /oraobi/OracleBI/server/Bin:/oraobi/OracleBI/web/bin
Jun 8, 2010 8:07:19 AM oracle.bi.analytics.management.monitoring.PerfDllJNI <init>
SEVERE: Exception details: perfjni (A file or directory in the path name does not exist.)
10/06/08 08:07:19 java.lang.Exception: perfjni (A file or directory in the path name does not exist.)
at oracle.bi.analytics.management.monitoring.PerfDllJNI.<init>(PerfDllJNI.java:117)
at oracle.bi.analytics.management.monitoring.AppPerfMon.<init>(AppPerfMon.java:87)
at oracle.bi.analytics.management.monitoring.PerfmonThr.initializePerfInterface(PerfmonThr.java:65)
at oracle.bi.analytics.management.monitoring.PerfmonThr.<init>(PerfmonThr.java:47)
at oracle.bi.analytics.management.Agent.registerPerformanceMBeans(Agent.java:87)
at oracle.bi.analytics.management.Agent.registerMBeans(Agent.java:55)
at oracle.bi.analytics.management.Oc4jAgent.registerMBeans(Oc4jAgent.java:48)
at oracle.bi.analytics.management.Oc4jAgent.main(Oc4jAgent.java:26)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.evermind.server.ServerApplicationClientLauncherImpl.launch(ServerApplicationClientLauncherImpl.java:93)
at com.evermind.server.ServerApplicationClientLauncherImpl.run(ServerApplicationClientLauncherImpl.java:74)
at java.lang.Thread.run(Thread.java:736)
2010-06-08 08:07:19.486 ERROR Exception in constructing PerfDllJNI for PERF configuration file: /oraobi/OracleBI/systemsmanagement/resources/performance/perf_OracleBIPresentationServer.xml
Exception java.lang.Exception: perfjni (A file or directory in the path name does not exist.)
java.lang.Exception: perfjni (A file or directory in the path name does not exist.)
at oracle.bi.analytics.management.monitoring.PerfDllJNI.<init>(PerfDllJNI.java:117)
at oracle.bi.analytics.management.monitoring.AppPerfMon.<init>(AppPerfMon.java:87)
at oracle.bi.analytics.management.monitoring.PerfmonThr.initializePerfInterface(PerfmonThr.java:65)
at oracle.bi.analytics.management.monitoring.PerfmonThr.<init>(PerfmonThr.java:47)
at oracle.bi.analytics.management.Agent.registerPerformanceMBeans(Agent.java:87)
at oracle.bi.analytics.management.Agent.registerMBeans(Agent.java:55)
at oracle.bi.analytics.management.Oc4jAgent.registerMBeans(Oc4jAgent.java:48)
at oracle.bi.analytics.management.Oc4jAgent.main(Oc4jAgent.java:26)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.evermind.server.ServerApplicationClientLauncherImpl.launch(ServerApplicationClientLauncherImpl.java:93)
at com.evermind.server.ServerApplicationClientLauncherImpl.run(ServerApplicationClientLauncherImpl.java:74)
at java.lang.Thread.run(Thread.java:736)
Can someone help me in resolving this issue
Thanks

ERROR J2EE OJR-00010 Exception starting HTTP server: default-web-site.xml, EKKTSM:9704, error: The socket name is already in use.This suggests that OC4J is running already, or something else is using port 9704

OBIEE Installation (Basic) on IIS

Similar Messages

Maybe you are looking for