OBIEE installation XP Professional SP2

I am trying to install serverclient on my machine with XP Professional SP2 and have disabled Symantic from my system but as it initialize the installation it throws out en error saying which OS are supported but its in the list still its not installing.
What could be the reason and solution to it?

I think it's Oracle Business Intelligence Enterprise Edition. I don't know what it does , but it's used by Peoplesoft and Siebel. General installation doesn't seem to be the right forum.
Werner

Similar Messages

Oracle XE 10g running on XP Professional SP2

Hi
I have installed Oracle XE 10g on XP Professional SP2. By default, it configured the port 8080 for the HTML DB.
When I do the netstat -a, I cannot see port 8080 is listening and I cannot open the HTML DB.
My oracle server is up and I can use it using SQLPlus
Can anybody tell me what proble I have, and the solution for the same?
Thanks & Regards
Manish

Hi
I want to install Oracle on this machine. In
product-specific Prerequisite checks I get:
Checking Network Configuration requirements ...
Check complete. The overall result of this check is:
Failed <<<<
Problem: The install has detected that the primary IP
address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on
systems with DHCP-assigned IP addresses; However,
before you can do this, you must configure the
Microsoft LoopBack Adapter to be the primary network
adapter on the system. See the Installation Guide
for more details on installing the software on
systems configured with DHCP.
How can I clear this error?
Regards
before you can do this, you must configure the
Microsoft LoopBack Adapter to be the primary network
http://www.google.com/search?hl=en&q=microsoft+loopback+adapter&btnG=Google+Search&meta=
or
See the Installation Guide
for more details on installing the software on
systems configured with DHCP.

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
Edited by: 867760 on Aug 18, 2011 3:36 PM

No, it is not supported as a server.
Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
HTH-
Jasmine.

Client OS - MS Windows XP Professional SP2 with SBO 2007 B

Dear All,
Is there any compatibility issue with the client OS - MS Windows XP Professional SP2 with SBO 2007 B?

Hi Narottam,
Yes, I did face problem with it. Once we upgrade XP with SP3 it works fine now.
Hope this help.
BR
Samir Gandhi

OBIEE installation drive

Hi all,
Everything was working fine for me till yesterday....
Yesterday i tried to write a java program with the help of following [link to write java application| http://oraclebizint.wordpress.com/2008/01/04/oracle-bi-publisher-101331-creating-applications-using-jdeveloper-11g-and-web-service-soap-apis/]
succesfully created the java application.
But today, when I try to open the reports in BIP I am getting error message given below,for all the reports. Except the last file name in the error message 'xdo_070309_124949014_rtf_out.xsl' is different for each report.
I believe that some config file got edited and bip is searching the required file in different OBIEE installation folder.
OBIEE is installed in C drive and the path C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\ is very much valid when in the error message it is telling that D:\..\..\... is invalid.
Please help me in the issue.
Error meassage when trying to view any report in BIP.
D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\xdo_070309_124949014_rtf_out.xsl (The system cannot find the path specified)
Thanks in Advance.
ESSPEE
Edited by: esspee on Jul 3, 2009 1:09 PM

Problelm solved.
i had kept xdodebuf.cfg file in the location D:\Program Files\Java\jdk1.5.0_03\jre\lib for debug purpose.
the log path in the file was LogDir=D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp
where it should have been written as LogDir=C:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp since OBIEE in my system is installed in C drive.
Thanks
ESSPEE
Edited by: esspee on Jul 3, 2009 2:05 PM

OBIEE Installation Problem

Hi
I installation process, " *Please Specify a location for a valid JDK Installation*" error is coming. In my system java version 1.6.0_26-b03 is available. I was given the enviroment variable of CLASS_PATH,JAVA_HOME,PATH.
Same path java programm is working fine, but the same path was given in OBIEE installation above said error is coming.
Can you please guide and solve this problem.
Regards
M.Padmanabhan

Hi,
You must have a folder like the following : C:\Program Files\Java\jdk1.6.0_11 (Java Development Kit)
If not you can dowload a jdk and install from here :
http://www.oracle.com/technetwork/java/javase/downloads/java-se-jdk-7-download-432154.html
Regards
Adil

OBIEE Installation

Goal : TO install OBIEE on Solaris 11 Zone3
Current environment
OS : Oracle Solaris 11
Global Zone
Zone1 - Oracle DB 11g
Zone2 - Weblogic Server
Zone3 - OBIEE Server - to be installed
While installing OBIEE, installation got terminated with DB connectivity error. Tried to install Oracle 11g client and terminated with error message on packages. According to the client installation guide below listed packages are missing in zone 3 and global zone. Please advise the way ahead.
SUNWsprox
SUNWi1of
SUNWi1cs
SUNWi15cs
SUNWxwfnt
Thanks in advance.
Sheen

Hi Kam,
First of all it's a pleasure to help! That being said, if you think I've correctly answered all your questions, it'd be great if you'd reward "Correct" and/or "Helpful" points for my participation.
Secondly, after installing the components properly, you will get one development application,although, I'm not sure if it is IDE compliant. There really isn't a true debugger component, however, it does have a compiler that will throw errors and you'll have to do some leg work to figure out what is the root cause and fix it.
The only setup.exe file you should be concerned with is in the Server folder. Ignore the others.
Good luck!
-Joe

Sharing reports across different OBIEE installations

Hello,
Is there a way to import/export reports from/to different OBIEE environments?
We developed a number of Answers reports, and would love to share them with our counterparts who have their own OBIEE installations. The problem is that our environments differ and our repositories differ as well (.rpd file). Some of us are running Windows, others are running Linux; some use Oracle, others SQL Server, or even Microsoft Access.
We tried copying the xml and corresponding .atr files from the catalog in one environment to the catalog in the other, but we quickly found out that the reports fail due to different configurations (missing tables, unknown users, problems with permissions, etc.)
Any help or ideas will be greatly appreciated.
Thank you very much.
-sb

Hello,
Thank you for your response.
I am replying to my own original post now. You are right, I was asking for the impossible -- it was late on Friday, and I must have been really tired when I submitted my original post.
The problem I needed to solve was this. Someone gave me Microsoft Access database, the .rpd file and the .xml and .atr files for the Answers reports. My job was to make those reports run in my environment, which is Oracle on Linux. I have finally made it work, but I did have to make changes in the .rpd and add a TNS entry before this started to work. Since there was a change in the physical layer, I had to recreate the BM layer to generate the correct mappings. Then I was able to simply copy and paste the presentation layer from the .rpd that was given to me.
Again, thank you very much for your response.
-sb

Seperate OBIEE installation and Weblogic Installation

Hi,
Our requirement is to setup the HA system in the Production for the OBIEE. We have Admin server as active-passive on the 2 OBIEE instances.
We trying to setup the high availability of the Admin server as per the Oracle Enterprise Deployment guide. If I setup that and manually failover the Admin server the user cannot login if the Admin server is migrated to second application server.
So our next option is to install the weblogic on the NAS shared storage and scale out the OBIEE components on the 2nd Application server so that Active-Passive Admin server can access the same settings on the shared storage. So the question is it possible to separate the weblogic and OBIEE installation directories separately in order to achieve high availability.
Thanks:
Apurv.

The URL will be exactly the same as a Windows installation but will have your Unix server name. You will need to learn how to start and stop the OBIEE services and OC4J in Unix. This is pretty well documented on the Infrastructure Installation and Configuration Guide.

Basic or Advanced OBIEE installation

We are trying to installed Advanced OBIEE question: Are we able to use the Web logic Server instead of the Oracle Application Server to perform the Advanced Installation type for OBIEE. We are using Weblogic 10.3, OBIEE 10.1.3.4
During a i am getting this message
■ You are evaluating the Oracle Business Intelligence product.
■ The Web Server is a J2EE Application Server other than Oracle Application Server.
■ Choose the Advanced Installation type when deploying Oracle BI with Oracle Application Server
If you plan to perform an Advanced Installation, Oracle Application Server (version 10.1.3.1.0 or
later) must be installed before you run the Oracle Business Intelligence installer.
Lastly, what is the difference between basic and advanced installation.

Hi,
I think you need to go ahead with Basic installation(which has OC4j as application server). Now after your OBIEE installation is complete you need to install right version of Weblogic and deploy the analyitcs.war file and BI publisher war file (if needed) so that applications would be created on you application server. Once this is done you are good to use OBIEE which would be running on weblogic server as an application listening on the port you configured.
Hope this helps
Regards,

A successful installation on Windows XP Professional SP2

I have had partial success installing before.
This time i created an D:\oraclexe director with the followin INHERITED permissions:
ravn\Administrators : Full Control
Authenticated users : Read & Execute, List Folder Content, Read
System : Full Control
I made sure that C:\WINDOWS\system32\drivers\etc\hosts contained the IP address and name of the PC. It also contained localhost IP address and name.
Installation went like a charm. Even the Database Home Page works.
I suspect that most problems with Oracle XE installations on Windows XP can be solved with the proper inheritable access rights. Errors in network configuration excepted.
greetings,

.Net uses oledb connection. The connection string used on the WinXP system results in the ORA-12154 error on the WinXP x64 system.
from WinXP x64 system:
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\dchman>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-AUG-2
006 07:56:31
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = daddysx2
)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (120 msec)
C:\Documents and Settings\dchman>
it is the same for the WinXP system, except for the host name.

Problem with OBI Apps v7.9.5 installation on WinXP SP2

We are attempting to install OBI Apps v7.9.5 on a WinXP SP2 machine. However, upon clicking the setup.exe file, we get the following error message -- Unable to load the launcher file index. Invalid file type in the index.
As a pre-requisite for OBI Apps, JDK 1.5.x and OBIEE v10.1.3.3.1 have been installed without any issues. Hence, not sure why we are getting the above error for OBI Apps. We have searched Oracle documentation, blogs and forums, but not found any reason or solution to this problem.
Any inputs will be greatly appreciated.
Thank you..
Edited by: OBIGuy on Nov 2, 2009 1:00 PM

Thank you for the input. The contents of the installation directory are as below:
Oracle_BI_Applications
|- doc (folder)
|- createResponseFile.bat
|- installWithResponseFile.bat
|- media.inf
|- setup.exe
|- setup.jar
|- version_apps.txt
Before posting this query, I did run the setup.jar file. However, when the installation process reaches 100%, it terminates with the following error - */version_apps.txt does not exist*. Also, it rolls back the complete installation, so I do not get the OBI Apps files/directories such as DAC, dwrep, RPD, Web Catalog zip, etc.
As shown in the directory structure, this file does exist. My guess is - since I am running the JAR file and not the EXE, it is unable to resolve the path of version_apps.txt correctly and hence throws this error. Having gone through related blogs and posts, I understand that OBI Apps can be installed on Win XP SP2.
Any inputs?
Edited by: OBIGuy on Nov 5, 2009 10:15 AM

OBIEE installation on Windows 7 64-bit OS

Hi All,
I want to install Oracle Business Intelligence 10.1.3.4.0 on Windows 7 64-bit OS can you suggest me things that i have to consider in this,
like :-
a) JDK 32/64 bit.
b) ODBC drivers for Oracle 32/64 bit.
any other driver or special consideration which I need on 64-bit OS.
I am curious about it and im going to install it on this weekend.
and if possible can i get other links from where i can get useful information related to this.
Please Help.
-Jagdeep Singh

Hi Mr. Singh,
If you have installed OBIEE successfully on win 7, please guide me with the installation steps that you have followed to install Oracle DB 10g/11g and OBIEE 10.1.3.x on windows 7 Home edition, 64 bit os?
My personal id: [email protected]
Thanks in advance,
Mili

Problem installing Oracle 11g on Windows XP Professional SP2

I removed my Oracle 10g express from my XP Professional according the
the blog at
http://aricsblog.blogspot.com/2005/08/uninstalling-oracle-10g-manually-from.html
Then I downloaded win32_11gR1_database.zip (1824539KB) from oracle and
unzipped it.
If I click either setup.exe or oui.exe, a dos console pops up and
shows the following:
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors
Higher than 256 . Actual 4294968296 Passed
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\Owner
\LOCALS~1\Temp\OraInstall2008-02-17_01-10-35PM. Please wait ...
It hangs there for about 1 minute and disappears, and nothing
happens. Tried it a few times, and every time it was the same
behavior.
Am I missing anything critical? How can I install 11g on XP Pro?
Thank you very much.

Hav you checked you have enough swap space?I had the same issue when I tried installing Forms Developer.
Check this url:
http://computermemoryupgrade.mysuperpc.com/virtual_memory_swap_file_size.shtml

Oracle 10g on Windows XP Professional SP2

I have problem installing oracle 10 g on Windows XP Professional. When the installation goes to "Configuration Assistants", it shows three options, Oracle Net configuration Assistant, Oracle Database Configuration Assistant and iSQL *Plus Configuration Assistant. However, the status of "Oracle Net Configuration Assistant" keep showing "In progress.." for more than 6 hours. It seems the program is not responding, then I stopped the program, uninstall it and tried to install it again but the installation still stopped at "Configuration Assistants". I did the installation/uninstall 3 times already. Could anyone help and provide some solutions?

Thanks Eric Jenkinson for the reply.
I tried the link listed above and I have some troble installing the sample database. Here are some problems.
1) During the"completing database creation process" (About 85% finished), a window pops up and it said please see the following file for details.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\sample\emConfig.log
in tnhe log file I see the following in the last few lines
oracle.sysman.emcp.util.PlatformInterface serviceCommand
: Waiting for service 'OracleDBConsolesample' to fully start
: oracle.sysman.emcp.EMConfig perform
: C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\sample\emConfig.log
oracle.sysman.emcp.EMConfig perform
: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: start「database control」
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
     at java.lang.Thread.run(Thread.java:534)
2) Then I tried to enter the Enterprise Manager Database control
by entering http://home:1158/em
However, the URL changed to
http://home:1158/em/console/database/instance/repDown
I opened the portlist.ini and got 1158
Enterprise Manager Console HTTP Port (sample) = 1158
(home is the PC name)
In the web page, it said the following
"Enterprise Manager is not able to connect to the database instance "
Anyone have any idea? Thank you so much.

OBIEE installation XP Professional SP2

Similar Messages

Maybe you are looking for