OBIEE  is slow when move from one page to another in OBIEE Dashboard

Hi Experts,
When I move from one page(Tab) to another page in OBIEE dashbord. It is taking too much time . Please suggest how can we overcome this.
Thanks,

Server is in UK.
It is running fine in Production for same time zone,But stuck in stage.
Thanks,

Similar Messages

  • Why the menu to move from one page to another is not seen when the page is online?

    On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
    why the menu to move from one page to another is not seen when the page is online?
    Thank you,
    Roger.

    Where are you publishing and how are you uploading the files?

  • When switching from one page to another, browser timeouts and have to refresh

    I know I am antiquated, however, I have dial up still. I have never had this problem until recently. When going from one page (even in email) the browser does not load and I have to refresh or it will sit there giving no error and doing nothing. Resetting fire fox does not work.

    Check the connection settings.
    *Tools > Options > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    You can also try to disable IPv6
    *http://kb.mozillazine.org/Error_loading_websites
    You can try to reset (power off/on) the router.
    You can check the Network tab in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K) to see if that gives any clues about the cause.<br />
    You can click an entry to see the response headers and check the Timings tab in the right pane.
    *https://developer.mozilla.org/en/Tools/Web_Console
    Note that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
    The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
    you can check its content with a plain text editor if you didn't create this file yourself.
    The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    *http://kb.mozillazine.org/Preferences_not_saved

  • When I use Firefox, if I want to move from one page to another, I get this: "Are you sure you want to navigate away from this page? Press OK to continue, or Cancel to stay on the current page.", OK doesn't always take me to where I wanted to go.

    Anytime I want to click on one page to move to another I get this question. Most of the time, it doesn't take me anywhere. I cleared everything. It didn't make a difference.

    This issue can be caused gadgets on the Facebook page.<br />
    You will have to check that out by removing each of them until you find the culprit.<br />
    If you added or updated gadgets recently than start with those.<br />
    See:
    * [[Troubleshooting extensions and themes]]

  • Safari is freezing up when use two finger swipe to move from one page to another

    I think this is a software issue since ii did thew last update this has been happening'

    There are reports that this problem can be solved by simply restarting, or by resetting the PRAM.

  • How to move from one page to another page

    hi all
    we have a report,in that if i click on user name he has to go to another page,
    in that page i have created one prompt and one report ,there he has to select groups(prompt) and in that page only he has to see the report
    how to provide like to page, when user clicks on user_name in the report (can we make it out navigation option in column property?)
    thanks

    hi kishore
    now i got the point ,now it is working ,
    what i did is ,i have created two pages
    page1 contains ,user_name as a prompt and one report (in this report i have given column format-->navigate to another page for the first column)
    in page2 i have created one more prompt on group_name and a report (is prompt option i have given bez when use clicks on page1 report column based on that it has to display the report)
    here my problem is,wen i returns from page2 to page1 and again i try to apply filter on the report it is not happening ,it is showing the report with old filters
    (i have again selected the value from prompt and i clicked on go button,it is not applying any filter on the report it is showing the report with older filters)
    What is the problem
    thanks
    sreedhar
    Edited by: 791907 on Oct 15, 2010 10:24 PM

  • Change selected tab when move from one view to another

    Hi all,
    I have a tabbedviewnavigator application where I have 5 tabs in it. So, the first tab contains the first view of the application, e.g. HomeView. Inside this view, I have a button where upon clicking it, it will push to the second view which is sitting in the second tab.
    How do I change the selected tab index upon clicking the button? Because right now the selected tab is till on the first tab. Please help.
    Best regard,
    Victor

    When you set selected index of 2nd tab, try to set focus on of any control in 2nd tab. It might happen that if you don't set focus on of any control tab may not change.

  • How do i move an app from one page to another

    how do i move an app from one page to another? When I upgraded to the latest software on my 4s, the camera went to the last page rather than remaining on the home page

    What Rudegar says is true, but it's a lot easier to rearrange icons in iTunes:
    Connect your phone and open iTunes. 
    Click on the Apps tab. 
    You will see your home screen in the main window, with the other screens in a scrollable column on the right. Scroll down and click on the last page to put it in main window. 
    Now scroll the column so the home page is visible on the right.
    Click on the Camera and drag it onto the home page at the right. 
    Be careful not to accidentally insert it into another app, thereby creating a group.

  • How do I move an app icon from one page to another?

    I would like to organize my Ipad2 but can figure out how to move the app icon from one page to another.

    Tap and hold down on an app icon until it wiggles. Then hold down on the icon and drag it about halfway over to the next screen and just hold it there for a second or two and the app will jump to the next page. Do it slowly and just hold the app on the edge of the screen. Don't try to drag it over quickly. It takes a little practice.
    Tap the home button when you are done and the apps will stop wiggling.

  • I have three "pages" of apps, not all of which are full.  How do I move an app from one page to another to consolidate?

    I have three pages of apps, not all of which are full.  How do I move apps from one page to another to have full pages?

    Hook your iPad up to your computer and iTunes and move them from within iTunes.
    Or
    Hold down on one of  your apps until they all start to wiggle. Then hold down on the ones you want to move and drag them on the screen. Drag them to the middle left to move them left,(such as from page 2 to page one) middle right ot move them right,(from page 2 to page 3) rearrange as you want.
    When you're done, tap the home key and everything should stop wiggling.

  • Move TextFrame From One Page to Another (Indesign CS3 & VB )

    Hello Friends!!!
    I have create 5 pages catalog in indesign CS3 & i need to shift one Group From One page to another...can anybody help me to do this issue.
    what i have tried is.......
    Set MyPge = MyDoc.Pages.Item(3)
    MyDsgn.Select MyPge.Groups.ItemByID(100)
    MyDsgn.Cut
    Set MyPge = MyDoc.Pages.Item(4)
    MyDsgn.Paste
    using this code group is pasting on page 3 again again. coz my screen is displaying page 3 it's not scrolling to page 4.......when i scroll to page 4 manually then it works. so the issue is how to scroll or how to activate perticular page on screen......plzz help me to do this......or is there any other way to solve this...
    Thanks
    Dhiraj

    to change active page:
    myInDesign.ActiveWindow.ActivePage = myPage4
    call myInDesign.Paste
    or you can move Group:
    call myGroup.Move(myDoc.Pages.Item(4))
    robin
    www.adobescripts.com

  • How do I move apps from one page to another?

    How do I move apps from one page to another?

    From a previous thread:
    Touch and hold any icon for a couple of seconds. They'll all start to wobble. Touch and drag the one you want to move to the side of the screen and the next screen will appear; drop the icon on whatever screen you want it on.
    You can also do it quicker in iTunes - connect the phone and click the Apps tab in the main window. You'll see a picture of your phone with the apps laid out. Just click and drag

  • How do you move icons from one page to another?

    How do you move icons from one page to another?

    hold down on an app till everything start shaking then move it to one side of the ipad and it'll change "pages" after a second or two.

  • How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.

    How do I move from one website to another using Safari, while still allowing Pandora to provide music in the background? It seems that when ever I open a new URL, I lose Pandora.

    Try running Pandora in its own tab and leaving that tab open (Safari 7.1.5, OS 10.9.5).  I don't have Pandora to try this, but it works for me otherwise.
    Good luck
    srb

  • OBIEE 11g How to pass variable from one prompt to another prompt in dashboard page.

      How to pass variable from one prompt to another prompt in dashboard page.
    I have two prompt in dashboard page as below.
    Reporttype
    prompt: values(Accounting, Operational) Note: values stored as
    presentation variable and they are not coming from table.
    Date prompt values (Account_date, Operation_date)
    Note:values are coming from dim_date table.  
    Now the task is When user select First
    Prompt value  “Accounting” Then in the
    second prompt should display only Accounting_dates , if user select “operational”
    and it should display only operation_dates in second prompt.
    In order to solve this issue I made the
    first prompt “Reporttype” values(Accounting, Operational) as presentation
    values (custom specific values) and default presentation value is accounting.
    In second prompt Date are coming from
    dim_date table and I selected Sql results as shown below.
    SELECT case when '@{Reporttype}'='Accounting'
    then "Dates (Receipts)"."Acct Year"
    else "Dates (Receipts)"."Ops
    Year"  End  FROM "Receipts"
    Issue: Presentation variable value is not
    changing in sql when user select “operation” and second prompt always shows
    acct year in second prompt.
    For testing pupose I kept this presentation
    variable in text object of dashboard and values are changing there, but not in
    second prompt sql.
    Please suggest the solution.

    You will want to use the MoveClipLoader class (using its loadClip() and addListener() methods) rather than loadMovie so that you can wait for the file to load before you try to access anything in it.  You can create an empty movieclip to load the swf into, and in that way the loaded file can be targeted using the empty movieclip instance name.

Maybe you are looking for

  • Transfer of xml file elements to data base columns

    hi all, i have to store xml file's data(element values) into the data base(table columns). i heard that we can acheive this by XSU. IS it is mediator between xml and db? if yes how to install it. i tried something as below with t as ( select xmltype(

  • 1st generation iPod touch upgrade to 3.2

    I want to upgrade from 3.1.1 to 3.2 on my iPod touch. When I go to the purchase site I am told I already have the latest 3.1 but does not give me the option to aquire 3.2

  • Difference between a Service user and Dailog user ?

    Hi All, Can anybody tell me the difference between a service user and a dailog user? Why can't we use a service user for BSP applications? We are on a 620 system and use bsp system login. With a dialog user it works, but when I switch this user to a

  • Serial number optional at goods receipt but mandatory at goods issue?

    How can we make serial number optional at goods receipt but mandatory at goods issue? Thanks in advance for the answers....

  • What is the other

    what is the other categorie when it comes to how many gigabites i have left on my ipod and why is it 1.19GB??