OBIEE SampleApp 107, VirtualBox. IP adress issue
Hello,
It is my first experience with VirtualBox. I always use VMWare and I've never seen such issue before.
Perhaps there is more a Linux question than a question OBIEE.
I have Virtual Box version of Sample app 107 on my Mac OS X laptop. I see that I have to modify hosts file for IP address. If I use ifconfig (in virtualbox) I see that my address is 10.0.2.15
My Mac OS host has a normal IP address like 192.169.10.108, so I expected something like that for my Virtual Box Sample 107 host too.
I want to access Virtualbox Sample 107 host from other VM's, for example using admin tool.
I tried different network adapters types (virtualbox setting): NAT, bridged adapter, internal network etc. Nothing helps - IP address of virtualbox host stay 10.0.2.15. If I manually set the IP address to 192.168.10.199 , I can still not access from outside.
Can someone explain to me how I can set the appropriate network property.
regards
Christian,
The first thing is - I know the difference between NAT and Bridget adapter. :-)
I mean, I've tried all types but without success.
For now I'm using NAT.
If I do ifconfig in the terminal of my Mac laptop, I see IP address - 192.168.10.103 (which is good)
If I do that in terminal Virtulbox I see IP address 10.0.2.15, see output below
That is just the problem that I mean, how can i get vb host correct in my network?
MY QUESTION IS - HOW CAN I GET A NORMAL IP ADDRESS FOR VIRTUALBOX HOST.
I can't ping virtualbox from my laptop and vice versa.
Regards,
Roman
Below ifconfig in Virtual Box:
inet addr: 10.0.2.15 bcast: 10.0.2.255 Mask: 255.255.255.0
inet addr: 127.0.0.1 Mask: 255.0.0.0
[oracle @ demo ~] $ / sbin / ifconfig
eth0 Link encap: Ethernet HWaddr 8:00:27: D5: 43:8 E
inet addr: 10.0.2.15 bcast: 10.0.2.255 Mask: 255.255.255.0
inet6 addr: fe80:: a00: 27ff: fed5: 438e/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets: 1163 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 1081 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisions: 0 txqueuelen: 1000
RX bytes: 101636 (99.2 KiB) TX bytes: 75036 (73.2 KiB)
Interrupt: 185 Base address: 0xd020
lo Link encap: Local Loopback
inet addr: 127.0.0.1 Mask: 255.0.0.0
inet6 addr::: 1 / 128 Scope: Host
BACK UP LOOP RUNNING MTU: 16436 Metric: 1
RX packets: 8692 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 8692 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisions: 0 txqueuelen: 0
RX bytes: 2632269 (2.5 MiB) TX bytes: 2632269 (2.5 MiB)
[oracle @ demo ~] $
Similar Messages
-
OBIEE SampleApp v207 Running Deadly Slow
Hi Experts,
I managed to install OBIEE SampleApp v207 successfully and applied all the fixes, though it was a real pain.
Verified that all services are Alive and running. http://i45.tinypic.com/fdu5w6.png
System Configuration
OS: Windows Server 2008 R2
RAM: 6 GB
HDD: 260 GB
Oracle VM VirtualBox
RAM: 3584 MB
Now the problem is when I tried to access any link (OBIEE Login, Weblogic Console, etc), which were already bookmarked in the FirFox inside the image, takes enormous time to load. The WebLogic console login page (http://localhost:7001/em) takes 20 minutes to load. I'm clueless here.
I have few confusion in the host file configuration. Currently, my host file looks as follows:
+127.0.0.1 obieesampleapp.us.oracle.com localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.90.51 obisamplev207.lgsglobal.net obisamplev207+ <-- This line I've added.
Also the documentations regarding deployment is itself a bug.
Any pointers please.Are you making progress yet?
20 minutes is definitely too long. On my virtual machine, it took 30 seconds ... from the point I launched Firefox, found the bookmark, and clicked. Probably less than 5 seconds for the login screen.
My best guess is that you do not have "guest additions" configured for Virtual Box.
The OBIEE VM was built on one version of VirtualBox; if you're now just deploying,
you are likely running the latest VB.
My rig is an HP Envy Laptop, quad i7 with 16GB real, Windows 8, Virtual Box Version 4.2.6 r82870
I realized I had to rebuild guest additions, so I decided to "yum update" the Linux el5 release too.
I started a blog entry about my experience:
https://blogs.oracle.com/obieeTips/entry/deploying_the_obi_sample_virtual
And am just getting back to making this deployment run more smoothly.
To start the services, I don't click on the Desktop icons; instead I open a terminal:
cd Desktop
time 0-<tab> ... bash completion to 0-StartDB,sh
time 1-<tab> ...
time 9-<tab>
The total elapsed time to bring all the services up was 13m45s ... including manual steps and recording.
Without a current "guest additions", you also cannot mount a Host directory to your VM for easy transfer.
I'm now working out these kinks, and will update the blog with new solutions.
- Mouse is still erratic, I don't know why. Works perfectly for "moments at a time",
then refuses to control the desktop.
- Screen is erratic ... bring up a Terminal session too close to the screen edge,
and it wraps to the opposite side.
- "Applications, Places, System" often disappear from the title bar
- Now working on Host browsers to interface to the VM appliance,
so I have two network adapters:
NAT --- for yum updates and such
Host-only --- for my Win8 browser interfaces -
Adobe customer service wont adress issue with 3 month free trial activation code
I bought a Sandisk HDHC card from Fryes.It have an activation code for 3 free months freee Creative Cloud and /Lightroom.When I tried the code it was invalid.When I tried the online chat,they gave me a lot of ********.Will I get the 3 months or will I post this on every SOCIAL MEDIA SITE?.ADOBE NEEDS TO WISE UP!!!
Its an ADOBE advertisement with their name on it.Product has activation code with it and is still valid.Adobe WONT LIKE ME by the time its over.
From: ssprengel <[email protected]>
To: al conlon <[email protected]>
Sent: Monday, January 12, 2015 10:32 PM
Subject: Adobe customer service wont adress issue with 3 month free trial activation code
Adobe customer service wont adress issue with 3 month free trial activation code
created by ssprengel in Adobe Creative Cloud - View the full discussionI would call Fry’s about it, not Adobe. You didn’t pay Adobe, you paid Fry’s, right? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7090387#7090387 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7090387#7090387 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
OBIEE SampleApp 11.1.1.5 (V107) functional/user guide?
Hello,
Is there any OBIEE SampleApp 11.1.1.5 (V107) functional/user guide available describing the user contents of the samples?
Thanks in advance,
- JoseLuisHi user,
This is the only resouce and which includes some blogs in it
http://www.rittmanmead.com/2011/07/obiee-11-1-1-5-sampleapp-now-available-for-download/
hope helps you.
Cheers,
KK -
OBIEE sampleapp v305 virtual image
Hi,
Do anyone have the link to download OBIEE sampleapp v305 virtual box image?
tried googling but no luck :(
Thanks,
VinoSampleAppv305 is now available for download on OTN http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html
-
OBIEE 11.1.1.7 installation Issues - Fails on Creating a Domain
Hi,
I have completed all the steps mentioned in different posts in this forum regarding my error, but none of them helps. After comprehensive searching i have tried to install OBIEE with these steps also.
1st time installation:
1. Followed simple steps
a) Created schema using RCU on MS SQL Server successfully.
b) After that ran the setup of OBIEE, it succeeded all the way, but when it was configuring it stuck on Creating Domain, and eventually failed after 180 minutes.
2nd time installation:
I completely removed, OBIEE from my system, with all the registry entries included. Started a fresh installation after reading all these forum posts. but still it failed again on Creating a domain, this time i kept on re-trying for 3 times, it failed and it took me about 315 minutes overall.
a) Create a loop back adapter.
b) Assigned that adapter an IP (10.10.10.10). Configured the /etc/host file reflecting my adapter IP and hostname.domain name.
127.0.0.1 localhost
127.0.0.1 WPKZS255082-XLZ.TX.MYDOMIN.COM WPKZS255082-XLZ
10.10.10.10 WPKZS255082-XLZ.TX.MYDOMIN.COM WPKZS255082-XLZ
(Above is my /etc/hosts file.
c) Installed Java JRE & JDK (7) on C:\JAVA and set the environmental variables in PATH (System Variable).
My System Configurations are:
Dell Latitude - E6520
8 GB Ram - 64-bit Architecture.
Windows 7 ULTIMATE
Computer Name : WPKZS255082-XLZ
Domain : TX.MYDOMIN.COM
----------These are the error messages that log file has created --------------
ERROR LOG START
File name from the log is generated and pasted here is : "install2015-04-17_04-50-25PM.out"
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\MMiddleware\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loading DLL : C:\MMiddleware\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : C:\MMiddleware\Oracle_BI1\install\config\\StartUtil64.dll
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
java.lang.Exception: Unable to find a free port in range 7001 and 7500
at oracle.as.install.engine.modules.util.others.PortUtilities.getFreePortInRange(PortUtilities.java:83)
at oracle.as.install.bi.biconfig.util.PortUtilitiesImpl.getFreePortInRange(PortUtilitiesImpl.java:17)
at oracle.as.install.bi.biconfig.standard.PortList.getPort(PortList.java:125)
at oracle.as.install.bi.biconfig.standard.PortList.getConsecutivePorts(PortList.java:160)
at oracle.as.install.bi.biconfig.standard.PortList.assignPort(PortList.java:181)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._initFarmDetails(DomainProvisioningTask.java:86)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: Unable to find a free port in range 9500 and 10000
at oracle.as.install.engine.modules.util.others.PortUtilities.getFreePortInRange(PortUtilities.java:83)
at oracle.as.install.bi.biconfig.util.PortUtilitiesImpl.getFreePortInRange(PortUtilitiesImpl.java:17)
at oracle.as.install.bi.biconfig.standard.PortList.getPort(PortList.java:125)
at oracle.as.install.bi.biconfig.standard.PortList.getConsecutivePorts(PortList.java:160)
at oracle.as.install.bi.biconfig.standard.PortList.assignPort(PortList.java:181)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._initFarmDetails(DomainProvisioningTask.java:89)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: Unable to find a free port in range 9500 and 10000
at oracle.as.install.engine.modules.util.others.PortUtilities.getFreePortInRange(PortUtilities.java:83)
at oracle.as.install.bi.biconfig.util.PortUtilitiesImpl.getFreePortInRange(PortUtilitiesImpl.java:17)
at oracle.as.install.bi.biconfig.standard.PortList.getPort(PortList.java:125)
at oracle.as.install.bi.biconfig.standard.PortList.getConsecutivePorts(PortList.java:160)
at oracle.as.install.bi.biconfig.standard.PortList.assignPort(PortList.java:181)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._setNodeManagerPort(DomainProvisioningTask.java:151)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask._initFarmDetails(DomainProvisioningTask.java:135)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
AdminServer port is -1
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.IllegalArgumentException: Invalid JMX Port
at oracle.as.provisioning.weblogic.ASDomain.<init>(ASDomain.java:340)
at oracle.as.provisioning.engine.WorkFlowExecutor._initializeConfigEngine(WorkFlowExecutor.java:1693)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:618)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
ERROR LOG ENDS
Request your urgent response on this matter. If anyone finds this same error, please send your feedback.
ThanksHello 0ad6e3fe-e3d8-4867-8ba9-780c4a7150ff,
Your name must be hard to type, let alone remember. Please choose a more speaking name / handle for this forum since it's inconvenient talking to an alphanumeric string rather than a person.
You seem to have port issues:
java.lang.Exception: Unable to find a free port in range 7001 and 7500
java.lang.Exception: Unable to find a free port in range 9500 and 10000
java.lang.Exception: Unable to find a free port in range 9500 and 10000
However you're on Windows, so I suggest you check the last post in this thread: Re: OBIEE 11.1.1.5 installation Error on windows 7 64 bit
BTW: Doing a google search as well as a normal forum search bring up that thread and the very first search result for you issue. -
OBIEE 11.1.1.7 installation issue- Patches install error
Hi ,
I am trying to install the OBIEE 11.1.1.7.1 apss with odi on a virtual machine. I have installed ODI, OBI, ran the rcu for bi apps and installed the bi aspps also succesfullly without any error. I am trying to apply patches and I am getting below errors when I run the perl scripts as per the instructions.
The value of OPATCH_SHIPHOME: C:\MWH\oracle_common\OPatch
Performing OPatch apply as follows: C:\MWH\oracle_common\OPatch\opatch napply C
:\patch_wrkdir\patches\oracle_common\generic -silent -oh C:\MWH\oracle_common >
C:\patch_wrkdir\oracle_common_generic_patches.log
UtilSession failed: NApply was not able to get the list of patches to apply.
Sleeping for 0 hours...
Analyzing logs .............
Cheking fmw_diagnostics_14757820_2.zip is a BI Tech Patch
found zip file fmw_diagnostics_14757820_2.zip
Cheking JDEVADF_REL7MLR10-RT_16525527.zip is a BI Tech Patch
found zip file JDEVADF_REL7MLR10-RT_16525527.zip
Cheking p16080773_111170_Generic.zip is a BI Tech Patch
found zip file p16080773_111170_Generic.zip
Cheking p16433036_111170_Generic.zip is a BI Tech Patch
found zip file p16433036_111170_Generic.zip
Cheking p16433147_111170_Generic.zip is a BI Tech Patch
found zip file p16433147_111170_Generic.zip
Cheking SOACOMMON_REL7B8_16438735.zip is a BI Tech Patch
found zip file SOACOMMON_REL7B8_16438735.zip
Cheking WebCenter_BP1REL7RC3_16311963.zip is a BI Tech Patch
found zip file WebCenter_BP1REL7RC3_16311963.zip
Cheking Webservices_Patch-3-PS6RC3_bug-16487786.zip is a BI Tech Patch
found zip file Webservices_Patch-3-PS6RC3_bug-16487786.zip
Opening Logfile for validation: C:\patch_wrkdir\oracle_common_generic_patches.lo
g
p16433147_111170_Generic.zip failed to install
p16080773_111170_Generic.zip failed to install
Webservices_Patch-3-PS6RC3_bug-16487786.zip failed to install
p16433036_111170_Generic.zip failed to install
JDEVADF_REL7MLR10-RT_16525527.zip failed to install
WebCenter_BP1REL7RC3_16311963.zip failed to install
fmw_diagnostics_14757820_2.zip failed to install
SOACOMMON_REL7B8_16438735.zip failed to install
Will try to install ODI patchesThe Patch Location is: C:\Installables\Patches\o
di\generic
The Unzip Patch Location is: C:\patch_wrkdir\patches\odi\generic
Will try to explode the patch zip file: C:\Installables\Patches\odi\generic\p16
629917_111170_Generic.zip
Can't create dir C:\patch_wrkdir\patches\odi\generic.
Cheking C:\Installables\Patches\odi\generic\p16629917_111170_Generic.zip is a B
I Tech Patch
Extracting: "C:\Program Files\7-Zip\7z.exe" -ybc -d C:\Installables\Patches\odi\
generic\p16629917_111170_Generic.zip C:\patch_wrkdir\patches\odi\generic
Error:
Incorrect command line
The value of OPATCH_SHIPHOME: C:\oracle\product\11.1.1\Oracle_ODI_1\OPatch
Performing OPatch apply as follows: C:\oracle\product\11.1.1\Oracle_ODI_1\OPatch
\opatch napply C:\patch_wrkdir\patches\odi\generic -silent -oh C:\oracle\produc
t\11.1.1\Oracle_ODI_1 > C:\patch_wrkdir\odi_generic_patches.log
UtilSession failed: NApply was not able to get the list of patches to apply.
Sleeping for 0 hours...
Analyzing logs .............
Cheking p16629917_111170_Generic.zip is a BI Tech Patch
found zip file p16629917_111170_Generic.zip
Opening Logfile for validation: C:\patch_wrkdir\odi_generic_patches.log
p16629917_111170_Generic.zip failed to install
I gave all the paths correctly in apply_patches_import.txt as below and changed apply_patch.pl to use 7zip after installing the 7zip.
# Required - Java home
JAVA_HOME=C:\MWH\Oracle_BI1\jdk
# Required - Inventory Location
INVENTORY_LOC=C:\Program Files\Oracle\Inventory
ORACLE_HOME=C:\MWH\Oracle_BI1
MW_HOME=C:\MWH
COMMON_ORACLE_HOME=C:\MWH\oracle_common
WL_HOME=C:\MWH\wlserver_10.3
#SOA_HOME=/scratch/aime/work/mw_home/Oracle_SOA1
ODI_HOME=C:\oracle\product\11.1.1\Oracle_ODI_1
# Required - An existing writable directory to create logs and temp patch files
WORKDIR=C:\patch_wrkdir
# Required - Path of patch directory till the release patch-set folder which is inside patches4fa/dist.
# i;e the patch-set folder for a particular release to apply patch from
# eg; /scratch/aime/tmp/ps1/biappsshiphome/patches4fa/dist/ps6rc3
PATCH_ROOT_DIR=C:\Installables\Patches
$DOWNLOAD_EXE = "\"C:${DIRSEP}Program Files${DIRSEP}7-Zip${DIRSEP}7z.exe\" -ybc -d";
$cmd = "$DOWNLOAD_EXE $_[0] $PATCHES_HOME";
I have set the ORACLE_HOME envrironment varaible and restarted the machine.
Please let me know any pointers in fixing this issue.
Thanks,
Phani.I belive there is a typo... Command should be:
$cmd = "$DOWNLOAD_EXE x $_[0] -o$PATCHES_HOME";
Pls. note -o$PATCHES....
Antonio
BExpert, Brazil -
OBIEE 11g Dashboard page load performance issue
Hi All,
One of my dashboard is taking for 5 to 15 min to load,Once the dashboard is displayed reports are coming fast. Dashboard has 5 pages.
Eg:
When I click on Dashboard -> XXXX Dashboard. It took 5 to 15 min to display the dashboard page. Reports are coming fast once the page is loaded.
Please help me on this.
Regards,
HariCool,
Thank you for sharing the opinions of you.
My English i'snt so good. May not have expressed myself correctly.
In response to my post, I said that "OTHER" point which should also be evaluated is the environment you are using. not that this point is paramount.
Since the OBIEE is generated queries, the evaluation of queries generated and sent the data sources for sure should be evaluated.
thank you guys -
OBIEE 11.1.1.6 Install Issue
Hi,
I am installing Obiee 11.1.1.6 for a company. Initially thought of going with and "Enterprise Install" so that I will have the option to scale out the system at a later stage if needed. But my installation fails everytime. Below are the things happened to me till now -
1) Tried installing it from the path \bishiphome\Disk1\install\win64\setup.exe as my machine is a 64 bit one. But this installation fails with permgen error. Tried a lot of options to after increasing the heap size and all but it didn't work. Hence I tried the installer from the path \bishiphome\Disk1\setup.exe (which is kind of a universal installer). This installation worked successfully for me and I have been able to work on this environment for 2 weeks now. We did the ldap authentication which works fine here. We created new charts and stuff which works here. But today when I created MUD setup, I noticed that there is no option called "Merge Local changes".
2) I created an SR with Oracle just to confirm if the universal installer is correct. They doesn't confirm it and infact they ask me if it is working correctly for me. Hence I am in a state of dilemma and worried about my QA and production installation. We need to go live in next couple of weeks and I am stuck with installation. Here are my options -
Simple Install - I can do this and this will work fine but is it ok to do this in QA and Prod env's? How many users does this install support? For me, its aorund 150 users and if it supports them then I can go for this.
Enterprise Install - Correct install (win64) is not working.
Software Only Install - I can do this but I am not sure if we have a valid license for the Weblogic Server. I don't have a direct contact over here and so not sure how I can find out this.
Please suggest how I should proceed here. Can I go with a simple install which is kind of the only option in front of me now? :-(
Any immediate help would be highly appreciated.
Thanks,
BinishHi,
I am installing Obiee 11.1.1.6 for a company. Initially thought of going with and "Enterprise Install" so that I will have the option to scale out the system at a later stage if needed. But my installation fails everytime. Below are the things happened to me till now -
1) Tried installing it from the path \bishiphome\Disk1\install\win64\setup.exe as my machine is a 64 bit one. But this installation fails with permgen error. Tried a lot of options to after increasing the heap size and all but it didn't work. Hence I tried the installer from the path \bishiphome\Disk1\setup.exe (which is kind of a universal installer). This installation worked successfully for me and I have been able to work on this environment for 2 weeks now. We did the ldap authentication which works fine here. We created new charts and stuff which works here. But today when I created MUD setup, I noticed that there is no option called "Merge Local changes".
2) I created an SR with Oracle just to confirm if the universal installer is correct. They doesn't confirm it and infact they ask me if it is working correctly for me. Hence I am in a state of dilemma and worried about my QA and production installation. We need to go live in next couple of weeks and I am stuck with installation. Here are my options -
Simple Install - I can do this and this will work fine but is it ok to do this in QA and Prod env's? How many users does this install support? For me, its aorund 150 users and if it supports them then I can go for this.
Enterprise Install - Correct install (win64) is not working.
Software Only Install - I can do this but I am not sure if we have a valid license for the Weblogic Server. I don't have a direct contact over here and so not sure how I can find out this.
Please suggest how I should proceed here. Can I go with a simple install which is kind of the only option in front of me now? :-(
Any immediate help would be highly appreciated.
Thanks,
Binish -
OBIEE Admin Tool and Hyperion ADM issue
I'm trying to connect to one HFM Application from OBIEE admin tool, I have installed in Server1 OBIEE and ADM Link and Server2 HFM
Products Installed: OBIEE 11.1.1.7.0 (Win Server 2008 R2/ Server1), ADM Link 11.1.2.2 (Win Server 2008 R2/ Server1), HFM 11.1.2.2 (Win Server 2008 R2/ Server 2)
But i can't import metadata objects, in the connection I got this error message:
[nQSError: 77031] Error occurs while calling remote service ADMImportService. Details: Details: [[
Failed to connect to ADM.
com.hyperion.ap.APException: [1033] Native: -2147221164 Error Reference Number: {059E2017-60C8-42C7-855A-F165AF034A40}<BR>Num: 0x80040154;Type: 1;DTime: 11/6/2013 12:01:55 PM;Svr: TEST;File: CHITRegistryWrapper.cpp;Line: 24;Ver: 11.1.2.2.000.3609;<BR>Num: 0x80040154;Type: 0;DTime: 11/6/2013 12:01:55 PM;Svr: TEST;File: CHsxClient.cpp;Line: 4023;Ver: 11.1.2.2.000.3609;<BR>Num: 0x80040154;Type: 0;DTime: 11/6/2013 12:01:55 PM;Svr: TEST;File: HsvADMDriverSessionInternal.cpp;Line: 326;Ver: 11.1.2.2.000.3609;
at com.hyperion.ap.adm.HssEnvironment.createException(HssEnvironment.java:195)
at com.hyperion.ap.adm.HssConnSession.HssAdmGetErrors(HssConnSession.java:612)
at com.hyperion.ap.adm.HssConnSession.OpenConnection(HssConnSession.java:2544)
at com.hyperion.ap.adm.HssConnSession.HssConnOpenConnection(HssConnSession.java:923)
at com.hyperion.ap.adm.HssConnSessionWrapper.HssConnOpenConnection(HssConnSessionWrapper.java:1483)
at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:912)
at com.hyperion.ap.adm.HssAdm.internal_openConnection(HssAdm.java:1799)
at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:1065)
at oracle.bi.integration.admimport.service.ADMImportClient.openConnection(ADMImportClient.java:64)
at oracle.bi.integration.admimport.service.ADMImportService.openConnection(ADMImportService.java:159)
at oracle.bi.integration.admimport.service.ADMImportService.executeDataSources(ADMImportService.java:146)
at oracle.bi.integration.admimport.service.ADMImportService.execute(ADMImportService.java:67)
at oracle.bi.integration.javahost.ServiceRpcCall.processMessageInternal(ServiceRpcCall.java:55)
at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:251)
at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:193)
at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:207)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:155)
at java.lang.Thread.run(Thread.java:662)
My data connection are the folow:
Connection Type: Hyperion ADM
URL:adm:native:HsvADMDriver:SERVER:HFM_APLLICATION
User Name:admin
Password: xxxxxxxx
Please I hope someone can help me.Login to Oracle Enterprise Manager Goto -> Business Intelligence -> coreapplication
Click - Capicity Managment Tab in Right side -> Performance -> Check Disable Disallow Online RPD Updates
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/querycaching.htm#BCGCACHF
If helps pls mark -
OBIEE 11.1.1.7 Installation Issue
Hi,
I am facing probem in installing OBIEE 11.1.1.7 on windows 7. It always fails on Instance Creation step.
I think many have faced this problem ,but I am not able to fix it.
Any response would be appreciated.
Thanks,
KrishnaHi
Please refer below link.
SATYA RANKI REDDY OBIEE SOLUTIONS: Configuration Action 'Creating Domain has failed
Thanks,
Satya -
OBIEE 10.1.3.4 access issues on Open SUSE Linux
Hey guys,
I am new to OBI EE and i am trying to get this working on open SUSE platform. I got lucky and finished installation and ran the following scripts
# run-sa.sh start
# run-saw.sh start
# run-sch.sh start
The first 2 scripts went fine but I had problems fixing the Scheduler services. It gives the following error:
[nQSError: 67042] The Scheduler Configuration is incorrect.
[nQSError: 67004] Registry value for SchedulerScriptPath not set.
I am not sure what to do. I am also unable to access the Presentation(Dashboards) page. What do I do to access the OBI login page. Any suggestions are extremely appreciated.
ThanksI am also unable to access the Presentation(Dashboards) page. What do I do to access the OBI login page. Any suggestions are extremely appreciated.Have started your OC4J instance? By default OBIEE installs a OC4J instance where the Analytics.war Web App will run. This is the Presentation Services plug-in that you use to access the BI Server via the Web (Answers, Dashboards, etc), so that's the login page you are looking for. On a default installation that OC4J instance runs on port 9704, so you could try going to http://your_server_name:9704/analytics to see if you can see the login page.
-
Upgraded to OBIEE 11.1.1.6.2 issues
Hello,
We have integration OBIEE to SAP-BW through XMLA standard, all worked very well under OBIEE 11.1.1.5.0;
Last week we have upgraded to OBIEE 11.1.1.6.2, so now all the reports based on SAP-BW cube do not work. This the common error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. XML/A error returned from the server: Fault code: "XMLAnalysisError.0x80000005". Fault string: "The XML for Analysis provider encountered an error". (HY000)Hi Neeraj,
If you like to upgrade from OBIEE 11.1.1.6.0 to OBIEE 11.1.1.7.0 please check:
Section 1.7 Moving from 11.1.1.3, 11.1.1.5, or 11.1.1.6 to 11.1.1.7
From: Oracle® Fusion Middleware Upgrade Guide for Oracle Business Intelligence 11g Release 1 (11.1.1.7.0)
http://docs.oracle.com/cd/E28280_01/upgrade.1111/e16452/bi_plan.htm#BABECJJH
Thanks,
Sharmela -
Bootcamp VS VirtualBox - Heat up issues
Hi,
I have installed VirtualBox in order to run a specific MMORPG game.
Unfortunately, I realized it makes my macbook air [latest model with 4GB RAM and Mountain Lion OS by the way] heat up, and so I am afraid to do so again.
[I read on forums that I shouldn't be worried when the macbook gets hot because the fans keep the components cooled all the time, and yet, I dont really feel like doing it much or even at all].
My question is, will my macbook heat up the same way if I launch the same game via bootcamp? [because only 1 OS will be running and consume less resources or something..?]
Thanks.You need to use MacBook Pro FanControl softare Lubbo. check their forum and if something does not work - and Apple has never offered or stepped up to the plate to offer a Windows utility in 5 yrs.
I always over-ride the fan speed - OS X default is too low and does not do an adequate job. Doesn't hurt, and then I can use multiple profiles and take preventive action to boost the fans. It is easier to increase air flow and keep it from getting hot, than it is to get hot and then try to expell the heat.
Automatic is not ever best. People almost always if they can make changes to graphic card fan speed when they game.
I suggest you just gaming forums and ask or look in Lubbo forum, someone in other thread said he just needed to change Mac ID to get it working, you know the 12,1 or whatever "name" Apple uses for a specific Mac model. -
Download OBIEE SampleApp Downloads (Build 825)
I am unable to download eApp Downloads (Build 825) file from this link. I have OTN user id and when I click on download it directs to me a url site and asks me to create an user account.
http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html
It asks me to create new account. When I enter my yahoo email id it gives error invalid email id. What the hell is going on...!
I tried to use my own user id and password. It won't work.
Somebody help...!Wow, I didn't know that you could use your Yahoo ID to log into Oracle. That seems strange.
Just go the route of creating a new Oracle account if you keep getting prompted. Typically if you log into Oracle forums you are logged into the rest of Oracle.com as well. So, log into Oracle forums and then go to this link, http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html.
However, as an alternative, you can always download the OBI Samples from Oracle Sample Code here,
https://www.samplecode.oracle.com/tracker/tracking/linkid/prpl1004/remcurreport/true/template/ViewIssue.vm/id/S740/nbrresults/33
Maybe you are looking for
-
Fields don't recognize their value has changed when a copy/paste value in inputed
I'm having a minor hiccup with my copy and paste buttons. I have check boxes that, when checked, make other fields visible. The copy/paste actions recognize when the check box value is 1 and paste accordingly in the new instance of the subform, howe
-
Error while deploying Windows 2008 R2 using SCCM 2012 R2
I am trying to deploy Window 2008 R2 image (captured from a reference machine) using SCCM 2012 R2. I have integrated MDT 2013 with SCCM 2012 R2 and created an MDT task sequence. During deployment, towards the end of Applying image.wim, it gives me a
-
I can't see my ipod in the corner of itunes
i cannot see my ipod touch in the corner of itunes. i wouLd Like to put music on it but can't. it wiLL not show itunes store either.
-
Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode
We are using Outlook 2010 with Exchange 2003 server. Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode. Recently we find that when user mailbox reaches its size limit and try to
-
Photoshop CS3 Eng Widows WebInstaller Extract Error
I downloaded Photoshop CS3 and run the installer. After it extracted some part of installator files it displays extraction error, so the installator placed on the ADOBE.COM web site is corrupted. Where to find correct one?