OBIEE Security - Account IDs

Hi,
Can anyone help me understand the "accountids" files under the webcat\root\system\security folder?
Thanks in advance.

Why do you need to know about them?
http://catb.org/~esr/faqs/smart-questions.html#goal

Similar Messages

I have reset my rescue email as the email is no longer valid but it has not changed in the secure account section please help

I have reset my rescue email as the email is no longer valid but it has not changed in the secure account section please help

Hello
Try restoring the device and setting up as new.
If it is still shows an iCloud activation lock, then it's on an iCloud account
The wrong device was removed from an iCloud account.
Check any other Apple IDs you might have at
iCloud.com
Get signed into them and remove that device.
I wish this was the first time I seen this.
Best of Luck

OBIEE Security 10g to 11g: Groups

I had a Security scenario that I wanted to throw out to the forum...
In 10g, we made use of the GROUP system variable to pull a users group membership from a database table. This was a Session Variable initialized upon each login.
Data-level and object-level security was different for each group.
In our environment users had the ability to switch groups, so they could be active in one of the groups and inactive in the others. We provided a form (WriteBack) that allowed them to set what group they wanted to be active for. They would then log out and log back in and have their new group assignments.
In the Session Variable this was done by pulling in only groups that were flagged as Active. This worked great as it was done at the Session level. So I could login once and see Dashboard A, swtich my role, then log back in and NOT see Dashboard A.
I know 11g still has the concept of WEBGROUPS, that would mimic the above, but my understanding is that Oracle is pushing the use of Application Roles.
My question is how would the above behavior be ported over to 11g using Application Roles? I didn't think the population of an Application Role was Session Based, my belief is that it is populated when the Admin Server/Managed Servers are bought up pulling from the applcable Security Provider.
Edited by: DustinC on Jan 19, 2012 1:29 PM
Edited by: DustinC on Jan 20, 2012 3:54 PM
Edited by: DustinC on Jan 22, 2012 12:45 PM
Edited by: DustinC on Jan 23, 2012 11:40 AM

Q1. how deploy external database security(users, groups) to OBIEE 11g.
we used external database security in 10g. all the users and groups maintained in database and obiee rpd has security groups. repository has group information only so it is deployed groups information to obiee 11g by upgrade assistant but how can it deploy users in external database?
Solution:
http://www.varanasisaichand.com/2011/09/external-table-authenticationorder-of.html
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-connecting-to-active-directory-and-obtaining-group-membership-from-database-tables/
http://obieeblog.wordpress.com/2009/06/18/obiee-security-enforcement-%E2%80%93-external-database-table-authorization/
Q2. all the users and roles in LDAP server. in this case how obiee 11g read users and group information?
Obiee11g is intergated with weblogic fusion middleware (Console,EM). in that console have feature to enable mulitiple LDAP authentication
while configuring AD via weblogic console we need to give the users and group info
Solution refer:
http://obieeelegant.blogspot.com/2012/01/obiee-11g-integration-with-ldap.html
http://docs.oracle.com/cd/E23943_01/bi.1111/e10543/privileges.htm#BABCDCFE
Thanks
Deva

Report on OBIEE Security

We use Default Authenticator and implemented the security using Weblogic console. Now my client want to see a report on the OBIEE security implemented; he want to see all the groups, roles, users listed and also interested in seeing what users and roles assigned to various groups for the project.
Is it possible to read Weblogic security Metadata?
Appreciate your thoughts on this.
Thanks
Bees

Was my answer correct? If so, please indicate so (top right of my last post). If not, then what was your answer?

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

Office Web Apps - Best Practice for App Pool Security Account?

Guys,
I am finalising my testing of Office Web Apps, and ready to move onto deploying it to my live farm.
Generally speaking, I put service applications in their own application pool.
Obviously by doing so this has an overhead on memory and processing, however generally speaking it is best practice from a security perspective when using separate accounts.
I have to create 3 new service applications in order to deploy Office Web Apps, in my test environment these are using the Default SharePoint app pool.
Should I create one application pool for all my office web apps with a fresh service account, or does it make no odds from a security perspective to run them in the default app pool?
Cheers,
Conrad
Conrad Goodman MCITP SA / MCTS: WSS3.0 + MOSS2007

i run my OWA under it's own service account (spOWA) and use only one app pool. Just remember that if you go this route, "When
you create a new application pool, you can specify a security account used by the application pool to be either a predefined Network Service account or a managed account. The account must have db_datareader, db_datawriter, and execute permissions for the content
databases and the SharePoint configuration database, and be assigned to the db_owner role for the content databases." (http://technet.microsoft.com/en-us/library/ff431687.aspx)

Alternate method of implementing EBS-OBIEE security

We have tried implementing the EBS-OBIEE security as per Metalink Note ID 555254.1(without SSO). How ever, we realised that for cookie based integration to work, both EBS, OBIEE URL need to reside on the same domain. At client location, the applications are hosted in different domains.
Any tested/proven alternative method, where we can pass the EBS responsibilities (say Operating Unit) to OBIEE?
Regards
KSK

Hi all,
yes, the session variable ':USER' is not picking the user name, but when i hard code it to 'BI_ADMIN" this works fine.
i have tried the following formats in the place of ':USER':
VALUEOF(NQ_SESSION.USER)
VALUEOF(NQ_SESSION."USER")
VALUEOF("NQ_SESSION.USER")
UPPER(VALUEOF(NQ_SESSION.USER))- checking if any problem with case
None of them worked.!!
When I remove the whole " USR.USER_NAME=':USER'
the sql runs fine..please help

Payment through different Account IDs of the same House Bank

Hi Expert,
How to make vendor payment through different Account IDs of the same House Bank?
When I am using F-58 T.code for making vendor payment.Only i can see house Bank but no option to select different account ID.
under one house bank i have 7 account ID and each account have different Payment method like check, wire Transfer,Electronic fund Transfer etc.
What is the solution for this.
Waiting for earliest solution
Prasad

Hi
Based on the Payment method and ranking order system picks the account id
please check your house bank settings
Thanks
Kameshwar Rao

Payment through F-58, but different Account IDs need to assign how?

Hi
How to make vendor payment through different Account IDs of the same House Bank?
When I am using F-58 T.code for making vendor payment. But only 2 Bank accounts only possible to take.
Payment method, Currency, House Bank will be the same but 22 types of Account IDs are there.
So, when I am assigning them in FBZP> Bank Account determination, the system is not accepting.
What is the solution for this.
Waiting for earliest solution
Regards
CHINNU

Dear All
Did you get any solution for this.
Client wants to make payment daily from many bank accounts from same house bank. For this F-58 T.Code is using.
But here, Same house bank, Same payment method, Same currency but, different account IDs.
Waiting for earliest reply.
Regards
CHINNU

How do I convert songs bought on old account IDs to a single account ID?

Over the years I have bought songs under different account IDs. They all show up and play when I am in iTunes or iPhone, but only newer ones will play over my Apple TV. Any clues?

lain ellis wrote:
And so how exactly does someone authorize eberything for every account?
Yes.
iTunes menu Store > Authorize this computer for all the accounts you have.

House bank with multiple banks account ids - f-58 paymt+check -check lot NA

I have a House bank (Indian Bank ) with three bank acccounts under that House bank.
I have created house bank as " INDBK"
and I also created account ids :
Current account 7509 - Account id is " 1000"
(ii) Staff salary account - 8141 - Account id is "1100"
In OBZ5 , Iam able to save only one of account ids with House bank " INDBK"
i.e.,
Either INDBK with Account id 1000 - in which case Iam able to do f-58 payment transaction
OR
INDBK with account id 1100 - in such case Iam able to do f-58 payment transaction
Iam able to do EITHR of the above .When I tried to save both account ids with same house
both an error message is displayed - " duplication entry "
Pls adivse how can all accounts under a house bank can be configured for F-58 pymnt+check.
Looking forward for your help.

HI -
It appears in FBZA you can only assign 1 house bank linked to 1 account ID 1-2-1 relationship.
Therefore can anyone tell me why this error is triggering in F-58? Check lot not found.
I have setup the check lots via FCHi, when I try to create the Account ID in FBZA, I get the error below, Can anyone please tell how we can use Other Account IDs via F-58, at the moement we are using for our head-office IBHO would like to use for the above 3 branches - Which has the same house bank but different account ID.
Target key must be different from source key
Message no. SV015
Thanks
Jay

House Bank and Account IDs

Hi Gurus,
Please tell me the uses of House banks and Account IDs?
How many Account Ids can be in one House Bank and is it compulsory that we should have equal no of Bank GL Accounts and Account ID in House Bank?
Please revert asat.
Thank You

A housebank is the bank used by the Company for its Banking operations.
EX: SBI is the Housebank...You may have two accounts with SBI one for colections and other for disbursenments.
Each bank account has a account ID...suppose you can term the above accounts as ACC(account for collections) and ACD(a/c for disbursements)
So each housebank can have many account IDs as per the number of accounts.
It is better to have a separate GL account for each account ID
Regards
Aravind
Assign points if helpful

OBIEE Security - How to setup SSO-integrated EBS users & mobile access?

I'm looking for the best approach to solution my company's OBIEE Security requirements, they are:
1) Create a standard authentication/security process at an enterprise level
2) Maintain EBS Roles to provide object-level and data-level security in OBIEE
3) EBS Users must go through the EBS portal to get to OBIEE (ie. single signon integration)
4) non-EBS users must go through the OBIEE portal
5) Both EBS and non-EBS users need ability to use the OBIEE iPad mobile application
So for the EBS users, I've implemented the SSO integration between OBIEE 11.1.1.5.0 and EBS R11 based on the Oracle white paper [ID 1343143.1]. I've also set up an Authorization session init block to read the user's EBS Roles and set up object/data level security.
For the non-EBS users, I've kept the default identity store (WLS-LDAP) and authentication provider.
My question is what's the best approach for providing mobile access to the EBS users? Obviously I can't pass an HTML cookie to the iPad for these guys. Assuming these EBS users are in an corporate-LDAP store, I was thinking to setup a dual authentication store that connects to both corporate-ldap(EBS) and the WLS-integrated LDAP(non-EBS).
Will this work? Does anyone have a better approach they'd like to share?

Please post the details of the application release, database version and OS.
We have a customer, who has upgraded to EBS R12 recently. With EBS R12 there comes a responsibility that enables users to directly open embedded BI in EBS. When people do LDAP authentication to EBS, they can directly open the OBIEE inside the EBS. But, when the EBS is SSO (OAM+WNA) integrated, OBIEE SSO in EBS does not work. What is the error?
It could be related that OAM generated cookies are not recognized by embedded OBIEE.
Is there a way to do a setup with both OAM SSO enabled to EBS, and EBS-OBIEE SSO is enabled inside EBS ? I do not think there is a single document that covers all the above (I believe you are aware of the individual docs).
For urgent issue, please always log a SR.
Thanks,
Hussein

HT5167 Why is it using 5.1.6 I can no longer enter ID's and passwords in my secure accounts-the spaces are blacked out?

Why is it using 5.1.6 I can no longer enter ID's and passwords in my secure accounts-the spaces are blacked out? I can use Firefox.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Security Account Group

Hi,
We create one product type in shareholding (security area). System select account assignment reference on Valuation class and three asset G/L posting.
My question is how to possible change position management procedure in one product type. We create Securities Account Group company wise, but in which time we select Securities Account Group so system change PMP? We check Assign Position Management Procedure tab it is possible to PMP on basis of Securities Account Group.
Regards,
Vishal Patel

Hi Greg,
if you differentiate on both Security Account and the Security Account Group, then you can see positions in TPM12. Otherwise you can make own reports based on logical databases (for example FTI_TR_POSITIONS). Further, on the quantity ledger position level, you can use TPM26.
Regards,
Tomislav

OBIEE Security - Account IDs

Similar Messages

Maybe you are looking for