OBIEE upgrade 11.1.1.5 - 11.1.1.6 psa.bat command not starting

Hello,
I am currently in the process of upgrading my OBIEE 11.1.1.5 application to 11.1.1.6 in a Windows 7 environment. My current weblogic version is 10.3.5.
I have successfully upgraded the OBIEE portion of the upgrade. I know try to run the psa.bat command and am immediately getting the following error:
C:\Users\innobi_srvacctd\OBIEE11G\oracle_common\bin>psa.bat
Oracle Fusion Middleware Patch Set Assistant 11.1.1.6.0
Log file is located at: C:\Users\innobi_srvacctd\OBIEE11G\oracle_common\upgrade\logs\psa2012-10-16-09-28-53AM.log
C:\Users\innobi_srvacctd\OBIEE11G\Oracle_BI1\jdk\jre\bin\awt.dll: The specified procedure could not be found
UPGAST-00054: error loading config file C:\Users\innobi_srvacctd\OBIEE11G\Oracle_BI1\upgrade\components\biplatform.xml
Could not initialize class javax.swing.JCheckBox
UPGAST-00054: error loading config file C:\Users\innobi_srvacctd\OBIEE11G\oracle_common\upgrade\components\audit.xml
The command failed to complete successfully
I have verified that the awt.dll command is in this directory and the biplatform.xml is in the directory. I cannot find the audit.xml file.
Any help or knowledge is much appreciated.
Thanks,
Jeff

Similar Messages

HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.

Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here

I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7. can someone help me?

I had Lightroom 5 and the creative cloud photographer bundle. upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7. just dead in the water. any help?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

OBIEE presentation services not starting

HI,
i downloaded samplesales OBIEE 11.1.1.6 bp2 virtual box image but presentation services are not starting ..giving 5 errors as follows
#SEARCH_CRITERIA
#     START_TIME: 2012-10-16T23:06:55.391+03:00
#     END_TIME: 2012-10-16T23:11:55.391+03:00
#     MESSAGE_TYPES:ERROR, UNKNOWN
#     ecid [OP_IS_IGNORE_CASE] 11d1def534ea1be0:5841315a:13a6b2c4365:-8000-00000000000000ef
#SELECTED_TARGETS_LIST
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer:weblogic_j2eeserver
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/ActionSamples:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/DMS Application(11.1.1.1.0):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/ESSAPP:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/EssbaseCalc:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/FMW Welcome Page Application(11.1.0.0.0):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/NonJ2EEManagement(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/OracleRTD(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/adminservice(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/analytics(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/analyticsRes:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/apex:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/biadminservices(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/biadminutils(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/bicontentserver(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/bilocaladmin(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/bimiddleware(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/bioffice(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/biofficeclient(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/bipublisher(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/bisearch(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/i:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/mapviewer(11.1.1):j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/metadatadict:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/wsil-wls:j2ee_application
#     /Farm_bifoundation_domain/bifoundation_domain/AdminServer/wsm-pm:j2ee_application
#     /Farm_bifoundation_domain/instance1/coreapplication_obiccs1:oracle_bi_cluster_controller
#     /Farm_bifoundation_domain/instance1/coreapplication_obijh1:oracle_bi_java_host
#     /Farm_bifoundation_domain/instance1/coreapplication_obips1:oracle_bi_presentation_services
#     /Farm_bifoundation_domain/instance1/coreapplication_obis1:oracle_bi_server
#     /Farm_bifoundation_domain/instance1/coreapplication_obisch1:oracle_bi_scheduler
[2012-10-16T23:10:49.092+03:00] [AdminServer] [ERROR] [] [oracle.bi.management.sysmancommon] [host: obieesampleapp.us.oracle.com] [nwaddr: 127.0.0.1] [tid: Thread-183] [userId: weblogic] [ecid: 11d1def534ea1be0:5841315a:13a6b2c4365:-8000-00000000000000ef,0] [APP: biadminservices#11.1.1] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/biadminservices(11.1.1)] [TARGET_TYPE: j2ee_application] Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obips1; msg: 0 of 1 processes started.
[2012-10-16T23:10:49.112+03:00] [AdminServer] [ERROR] [OBI-SYSMAN-1249] [oracle.bi.management.sysmancommon] [host: obieesampleapp.us.oracle.com] [nwaddr: 127.0.0.1] [tid: Thread-148] [userId: weblogic] [ecid: 11d1def534ea1be0:5841315a:13a6b2c4365:-8000-00000000000000ef,1:29115] [APP: biadminservices#11.1.1] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/biadminservices(11.1.1)] [TARGET_TYPE: j2ee_application] Processing Event: SEVERE: Element Type: PROCESS, Element Id: instance1:coreapplication_obips1, Operation Result: FAILED_TO_START, Detail Message: Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obips1; msg: 0 of 1 processes started.
[2012-10-16T23:10:51.384+03:00] [AdminServer] [ERROR] [OBI-SYSMAN-1249] [oracle.bi.management.sysmancommon] [host: obieesampleapp.us.oracle.com] [nwaddr: 127.0.0.1] [tid: Thread-148] [userId: weblogic] [ecid: 11d1def534ea1be0:5841315a:13a6b2c4365:-8000-00000000000000ef,1:29115] [APP: biadminservices#11.1.1] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/biadminservices(11.1.1)] [TARGET_TYPE: j2ee_application] Processing Event: SEVERE: Element Type: BI_INSTANCE, Element Id: coreapplication, Operation Result: FAILED_TO_START, Detail Message: Error in starting one or more components of BI Instance; Please check the server log files for detailed message.
[2012-10-16T23:10:51.386+03:00] [AdminServer] [ERROR] [EM-02694] [oracle.sysman.emai.view.bi.impl.ProgressDialogHelper] [host: obieesampleapp.us.oracle.com] [nwaddr: 127.0.0.1] [tid: Thread-148] [userId: weblogic] [ecid: 11d1def534ea1be0:5841315a:13a6b2c4365:-8000-00000000000000ef,1:29115] [APP: em] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Supplementary information regarding operation: PROCESS:instance1:coreapplication_obips1;FAILED_TO_START;Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obips1; msg: 0 of 1 processes started.
[2012-10-16T23:10:51.387+03:00] [AdminServer] [ERROR] [EM-02694] [oracle.sysman.emai.view.bi.impl.ProgressDialogHelper] [host: obieesampleapp.us.oracle.com] [nwaddr: 127.0.0.1] [tid: Thread-148] [userId: weblogic] [ecid: 11d1def534ea1be0:5841315a:13a6b2c4365:-8000-00000000000000ef,1:29115] [APP: em] [TARGET: /Farm_bifoundation_domain/bifoundation_domain/AdminServer/em] [TARGET_TYPE: j2ee_application] Supplementary information regarding operation: BI_INSTANCE:coreapplication;FAILED_TO_START;Error in starting one or more components of BI Instance; Please check the server log files for detailed message.
#MESSAGE_COUNT: 5
i have already tried below mentioned things but still issue persists,
RESOLUTION:
Connect to WebLogic Server (WLS) Console -> Deployments. Ensure that all deployed components are in ‘Active’ state.
Use the command prompt to verify the opmn status, as the EM console will not always reflect the correct status.
If any of the components is in ‘Prepared’ state, select that application and then click on “start servicing all requests”.
Restart BI Server and Presentation Services
If this does not resolve the issue please follow the steps below:
In some cases, the following additional step might be needed to resolve the issue.
Access the Enterprise Manager Fusion Middleware control: http://<host.domain>:port/em
Navigate to Business Intelligence -> coreapplication
‘Capacity Management’ tab -> ‘Scalability’ sub-tab
Click on ‘Lock and Edit Configuration’ button
Enter the IP address in the ‘Listen Address’ field
Click on ‘Activate Changes’ followed by ‘Release Configuration’ buttons.
Restart BI Server and Presentation Services
Please guide.
log file is as below,
[2012-10-16T23:10:38.000+03:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.6.2 (Build 120605.2000 BP1 32-bit) are starting up.[[
File:sawserver.cpp
Line:455
Location:
     saw.sawserver
ecid:
[2012-10-16T23:10:39.000+03:00] [OBIPS] [ERROR:31] [] [saw.connectionPool.getConnection] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:connection.cpp
Line:395
Location:
     saw.connectionPool.getConnection
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2012-10-16T23:10:39.000+03:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Line:316
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2012-10-16T23:10:39.000+03:00] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Line:319
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2012-10-16T23:10:39.000+03:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:713
Location:
     saw.sawserver
ecid:
[2012-10-16T23:10:45.000+03:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.6.2 (Build 120605.2000 BP1 32-bit) are starting up.[[
File:sawserver.cpp
Line:455
Location:
     saw.sawserver
ecid:
[2012-10-16T23:10:47.000+03:00] [OBIPS] [ERROR:31] [] [saw.connectionPool.getConnection] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:connection.cpp
Line:395
Location:
     saw.connectionPool.getConnection
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2012-10-16T23:10:47.000+03:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Line:316
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2012-10-16T23:10:47.000+03:00] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Line:319
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2012-10-16T23:10:47.000+03:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:713
Location:
     saw.sawserver
ecid:
Edited by: 948856 on Oct 16, 2012 1:24 PM

hi Christian,
tried it.still same error. going to download fresh VMs from oracle.hoping same issue will not come again.
thanks,

Can not start a program after upgrade to version 5.0

I upgrade the iphone to version 5.0 and after that I can not start any program installed exept for the program that come with the phone

Ray,
You might have been there but I would like to know are there any error footprints in the logs?
eg.:
on OVMM: */var/log/ovm-manager/*
on OVM server: */var/log/xen/* && */var/log/ovs-agent/*
--Dheeraj.

Server not starting after kernel upgrade

Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        BWS
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    146
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c   1243]
     shared lib "dw_xml.dll" version 146 successfully loaded
     shared lib "dw_xtc.dll" version 146 successfully loaded
     shared lib "dw_stl.dll" version 146 successfully loaded
     shared lib "dw_gui.dll" version 146 successfully loaded
     shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01                     <
DpShMCreate: sizeof(wp_adm)          23680     (1480)
DpShMCreate: sizeof(tm_adm)          5652128     (28120)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c   11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01                     <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c   14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Mon Jun 16 17:02:59 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     3504 Ended         no      1   0        0
1 DIA     3380 Ended         no      1   0        0
2 DIA     4348 Ended         no      1   0        0
3 DIA     3528 Ended         no      1   0        0
4 DIA     4528 Ended         no      1   0        0
5 DIA     4360 Ended         no      1   0        0
6 DIA      788 Ended         no      1   0        0
7 DIA     4432 Ended         no      1   0        0
8 UPD     3376 Ended         no      1   0        0
9 ENQ     3632 Ended         no      1   0        0
10 BTC     3928 Ended         no      1   0        0
11 BTC     3304 Ended         no      1   0        0
12 BTC     3316 Ended         no      1   0        0
13 BTC     4956 Ended         no      1   0        0
14 SPO     1136 Ended         no      1   0        0
15 UP2     4968 Ended         no      1   0        0
Dispatcher Queue Statistics               Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update     total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure:               Mon Jun 16 17:02:59 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01                     < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01                     <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c   10421]
Good Bye .....

Are you sure the Database and the listeners are up and running?

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

HT1386 I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that.

I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.

Welcome to the  discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar. Totally stumped. Ideas anyone?

After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.
Also, my other tablet - Samsung TabS - has same issue - calendar wont sync. My IPhone and my desktop (windows) synch just fine.
Google calendar syncs on all devices. Totally stumped. Ideas anyone?
THANKS

1.      Log onto Outlook Web Access
2.      Top right hand part of the screen select "Options"
3.     Select "See All Options"
4.      Select "Phone" menu
Check if you have 10 Devices registered.
If you have, you need to delete one of them to add your new Smart Phone to Exchange for synching
Check the "Last Sync Time" to indicate if this device is still active or not.

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out. I need these programs. How do I proceed?

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?

Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Firefox will not start after upgrade from 3.0.1

I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I cannot open Firefox. It is not like the other "Will not start" problems, because in the Task Manager, firefox.exe pops up, then goes away instantly. I have tried using Safe Mode, doing a clean install by uninstalling Firefox and my profile, cleaning the registry, then using CCleaner, then trying to reinstall, but the problem persists. Sometimes firefox.exe doesn't even show up in the Task Manager. I also cannot use any version of IE(even if I wanted to), Safari or Chrome. They all have the same results. I suspect that it is not a problem with Firefox, but with my computer, but I don't what is wrong. Can anyone help me?
== This happened ==
Every time Firefox opened
== I upgraded from 3.0.1

Sounds like something is killing off your browsers before they can start. I really have no idea why Firefox 3.0.1 is working somehow, though.
Do a malware check with a few different programs, you need to use all, because not all programs detect the same malware.
For each of these, make sure they are updated after installing, and run a full scan.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.

''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it. I want to come back to the previosu version. why is it so complicated. Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.

I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!

iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

OBIEE upgrade 11.1.1.5 - 11.1.1.6 psa.bat command not starting

Similar Messages

Maybe you are looking for