OBIEE (Windows) Ceate report in BI Publisher gives error

Dear,
I am trying to create report in Bi publisher , First I create data base connection then sucessfully then i go to the report tab then create report it gives this error, please help me in this regards
D:/install_obiee/xmlp/XMLP/Reports/BIPUBLISHER/hussnnain/hussnnain.xdo

Hi,
Check this....http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTroubleshoot6.html
Did you create rtf template and uploaded it in layouts?
This would be right place for your questions...BI Publisher
Hope this helps :-)
Regards,
Srikanth

Similar Messages

Itunes 64-bit on Windows & 64-bit does nothing but give errors!

I've been trying to connect Iphone 3g 4.0.1 on Windows7 64-bit since last 5 days! Tried almost all the tips found on internet regarding this issue and none worked! At first simply downloaded the latest iTunes 9 (64-bit). It didnt work at all and I ended up seeing different errors. Then read this;
http://www.sevenforums.com/installation-setup/4318-release-notes-important-issue s-beta-release-windows-7-a.html
Tried that too and still getting nothing but errors. In last 5 days I encountered the following variety of errors;
Device Manager -> Portable Device -> MTP Usb Devie -> Device cannot start (Code 10)
Device Manager -> Portable Device -> Apple Iphone -> Device cannot start (Code 10)
iTunes -> iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000023)
iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000035)
iTunes -> iTunes could not connect to the iPhone because an invalid response was received from the device (0xE8000001)
I even tried programs like iPhone Explorer, DiscAid, iFun-box etc. None worked. And now looking for a final answer. Will it work on Windows 7 or not? I am too tired of trying now.

I don't know if this will help, but folks on Windows systems (typically laptops) with PM55 chipsets (like their brethen with P55 chipsets and other chipsets in the 5 series and 3400 series) have been reporting a lot of trouble with iPod/iPhone syncing (in particular, 0xE0000065 error messages, but the symptoms may vary).
In cases where no BIOS updates are available, and the BIOS does not have a user configurable C-STATE setting, some success has been achieved by using an old trick ... changing the power management settings on the USB Host controllers, as per the following document:
http://support.apple.com/kb/TS1401
When attempting to connect iPhone or iPod touch, you may see one or more of the following error messages:
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800000a)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800006b)
▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)
Alternatively, the error may be the same as above but end with a different number. See:
http://support.apple.com/kb/TS3221
(thanks to B Noir for the tip)
Hope this helps.

Error while creating a report in BI publisher

Hi all ,
I am getting an error while creating a new report in BI publisher .
the error shown in console is --
java.lang.SecurityException: /
In the front end - i am getting
Operation failed: d:/OracleBI/xmlp/XMLP/Users/~administrator/annapurna/test/test.xdo
please suggest if anyone knows.

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Iphone 8.3 give error 3014

I am trying to update iphone 5s to 8.3 via itunes on windows 7 pc. But it gives error 3014. I explored forums and tried fixes to edit the Host file . But that didn't fix the issue.
Please assist.

Hi ksanjay209,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are having trouble updating the OS on the iPhone. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Resolve iOS update and restore errors in iTunes - Apple Support
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Mario

Open analysis report in BI Publisher in OBIEE plus

Hi,
I am unable to open a report in BI Publisher which was generated in analysis in OBIEE plus(11g). Previously I did it through Oracle BI Analysis+ in the Data Modle (Data Set).
Now I am unbale to find the reports through same process. I noticed only two empty folders Weblogic and Users.
Can any one tell me how to open the reports in BI Publisher from anaysis..
Thanks & Regards.

Hi,
I am unable to open a report in BI Publisher which was generated in analysis in OBIEE plus(11g). Previously I did it through Oracle BI Analysis in the Data Modle (Data Set).
Now I am unbale to find the reports through same process. I noticed only two empty folders Weblogic and Users.
Can any one tell me how to open the reports in BI Publisher from anaysis..
Regards.
DCB

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

Error while creating DataTemplate based Report in BI publisher

hi,
i am trying to create dataTemplate in BI Publisher when i view the report in BI Publisher its gives a error Attribute "valueSet" required
anyone please help me
<dataTemplate name="SrBysrtype" description="ServiceRequestBySrtype" defaultPackage="sr" dataSourceRef="demo">
     <parameters>
          <parameter name="owner" dataType="number" defaultValue="57"/>
          <parameter name="srtype" dataType="character" defaultValue="Customer Call"/>
     </parameters>
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[
SELECT incident.Incident_Id IncidentId,
incident.incident_date IncidentDate,
incident.Incident_Number IncidentNumber,
incident.Caller_Type CallerType,
incident.Status_Flag Status,
incident.Summary Summary,
severity.name IncidentSeverity,
urgency.name IncidentUrgency,
itypes.name IncidentType
FROM cs_incidents_all_b incident,
cs_incident_severities_b severity,
cs_incident_urgencies_b urgency,
cs_incident_types_b itypes,
cs_incident_statuses_b status
WHERE severity.incident_severity_id= incident.incident_severity_id
AND urgency.incident_urgency_id =incident.incident_urgency_id
AND itypes.incident_type_id = incident.incident_type_id
AND status.incident_status_id = incident.incident_status_id
AND incident.incident_owner_id=nvl(:owner,incident.incident_owner_id)
AND itypes.name=nvl(:srtype,itypes.name) ]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_SR" datatype="varchar2" source="Q1">
               <element name="IncidentId" value="incident.Incident_ID"/>
               <element name="IncidentDate" value="incident.incident_date"/>
               <element name="IncidentNumber" value="incident.Incident_Number"/>
               <element name="CallerType" value="incident.Caller_Type"/>
               <element name="StatusFlag" value="incident.Status_Flag"/>
               <element name="Summary" value=" incident.Summary"/>
               <element name="IncidentSeverity" value="severity.name"/>
               <element name="IncidentUrgency" value="urgency.name"/>
               <element name="IncidentType" value="itypes.name"/>
          </group>
     </dataStructure>
</dataTemplate>

Hi,
check in your Report definition if there's a parameter defined as Type MENU but without a corresponding LOV.
Regards
Rainer

Creating the report in BI Publisher with SQL SERVER 2008

Dear Team,
I want to create report on BI Publisher....i am able to create report with the help of oracle database ...but i dont'nt know how to create DATA MODEL in sql server 2008 ...
plz tell me the wright way....
Thanks,
Him..

Hi Jin Chen,
Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services Database
6f8g Unexpected
Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)
0x1EEC
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
Do you have any idea based on the error above?

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

Excel Output for Standard Reports using XML Publisher

Hi All,
Customer wants to get Excel Output for the existing Standard/Custom Reports using XML Publisher. I followed the following procedure.
1. Changed the output to XML for Concurrent program ( Trial Balance - Detail )
2. Used the Existing seeded Template
3. Ran the Report using EXCEL as the output.
When I clicked on View Output, I am not able to see the Excel output. I am seeing the HTML tags in the output window. Verified that Viewer Options existed for Excel as follows:
File Format=Excel, Mime Type=application/vnd.ms-excel.
When I ran the report with PDF output. I can see the PDF output.
Ran the HTML output with new Viewer Option ( File Format=HTML, Mime Type=application/vnd.ms-excel) then I can see the output in Browser in the Excel format. I did this test after going through the Metalink Note: Note:316752.1
My question is.. Do I need always choose the HTML ouput in the options window to trigger the Viewer option for HTML. Customer may not like this idea. He would like to choose the Excel Output and see the output in Excel format either in the Browser or Microsoft Excel.
Can someone in this situation before help me out.
Thanks,
V

Questions rephrase:
1. Is the output is same for HTML and Excel options ?
2. Why the output is viewable with HTML option and not with Excel option ?
Customer has XML Publisher Version 5.0.1 and in the process of applying 5.6.1
Thanks,
V

List of reports in BI Publisher

Hi,
Could you please let me know how I can get the list of reports in BI Publisher 10g without using any Web Services...
Something similar to what I do in OBIEE Catalog Manager where I can export the Presentation Catalog to a file...
Thanks & Regards,
dmaze

You need first to get access to BI Publisher Enterprise (this is not the same as BI Publisher template builder). Either install one on your PC, or get access to the company's one. Once you logged in, you will be able to define reports, upload templates, etc. Please refer to the BIP Enterprise documentation for more detailed instruciotns.

SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Migrating 10g report to Bi Publisher 11g

Hello,
I have an existing 10g report from BI Publisher.
I would like to upgrade to 11g. in that process, i created a folder in 11g, with catalog menu option.
But when i try to upload existing datamodel from 10g, my upload fails.
Can any one advise on this?
Or should I create the data model from scratch by copying the existing data template query and pasting to the datamodel code tab section in 11g?
please advise
thanks

Check this
http://clairehu.com/2012/04/02/deploying-obiee-11g-bi-publisher-reports/

BI Answer report convert to publisher

Hi Experts,
I am using obiee 10.1.3.4.1.
I have prepared obiee report in answers . I have to convert same report to bi publisher.
Please guide me how to do this requirement.
it is very urgent.
Thanks.

Check this doc may help you
http://www.infosemantics.com/infosemantics-obiee-and-bi-publisher.html
If helps pls mark

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

OBIEE (Windows) Ceate report in BI Publisher gives error

Similar Messages

Maybe you are looking for