OBIEE11g client configuration using odbc on windows 32

Hi,
I can able to install obiee11g on windows 32 but after installaion it points directly to odbc32 so from here how to go? can i go for System DSN or else what?
Thanks in advance...
Regards,
Abs

HI,
http://gerardnico.com/wiki/dat/obiee/odbc_driver_bi_server_create -- how to create DSN With screen shot step by step.
Steps :
1. Go--> Run-->odbcad32 once execute this command it will show ODBC Data Source Administrator.
2. Here Select System DSN--> Click ADD--> You can select -- Oracle BI Server --> Give me name as you like --> Server---> YOUR linux server ip-->next -->next --> finish.
http://oraclebiblog.blogspot.in/2010/11/obiee-11g-setup-client-dsn-for.html --- Another video link Please refer this link.
Loop Back adopter:
http://gerardnico.com/wiki/windows/loop_back_adaptater
Hope this help's
Thanks,
Satya

Similar Messages

I filled in a Word pdf document, sent it to a client who uses Word in Windows 7 and the form appears blank when they open it. They can read the form, but nothing that I filled in. Help!

I was sent a lengthy pdf form that required me to enter data onto it. The sentences appeared compressed on my screen, but I could see everything that I entered. Next emailed it to my boss and when he opened it on his Windows 7 with Word, all of the data that I had entered appeared lost. It was as if I hadn't entered anything on the form. So I asked him to send it back to me. He did and when I opened it on my Mac Book Air, all of the information that I had filled in was there on my screen.
This went back and forth a few times, but the result was always the same. I have been requested to complete the form on a Windows based computer, which will take me hours. Any ideas what causes this problem and how to fix it?

What has this to do with Pages? You probably did this in Preview.
Peter

Which Oracle client to use? with CRS2008 on Windows 2008 R2 64bit

Hi,
We are setting up a standalone Crystal Reports 2008 Server on Windows 2008 R2 64bit. This server will serve some reports that will pull data from an Oracle 11g DB. Several Oracle 10g/11g, (32bit or 64bit) DB client has been tried, but CRS cannot connect to the oracle DB using any of them. Which oracle client is known to be working well on this setup?
CRS 2008 <> Windows 2008 R2 64 bit <> Xeon E5600 series machine
Thanks,
Steve

Hello,
CRS2008 v1 supports Oracle 9.2, 10g R1, 10G R2 and 11g R1.
The client to use on those version are the same as the server meaning if you have a 11g R1 server then you can use an Oracle Net Client 11G R1. But you can use also a JDBC, ODBC, OLEDB Oracle 11G R1.
If you have a CRS2008 v0, then Oracle 11G is not supported. Only 9.2, 10g R1 and 10G R2.
I hope this will help you
Regards,
Philippe

Oracle 8i Client/ODBC with Windows 2000

Ever since I upgraded(?) to that wonder of modern science, I can't seem to get my Oracle client to work. I've tried every remedy on metalink and still nothing. It's always the same error shown below. Besides moving to Linux, what else is there for me to try?
Fatal NI connect error 12571, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=savant)(CID=(PROGRAM=D:\Oracle\Ora81\BIN\SQLPLUSW.EXE)(HOST=RODDJ)(USER=rjohnson)))(ADDRESS=(PROTOCOL=TCP)(HOST=savant)(PORT=1521)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.1.6.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.1.6.0.0 - Production
Time: 12-DEC-2000 15:44:12
Tracing to file: c:\temp\sqlnet_1468_1.trc
Tns error struct:
nr err code: 0
ns main err code: 12571
TNS-12571: TNS:packet writer failure
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
null

I'm also having this problem.
I'm setting up a C++Builder Application to work with the Oracle
8i Release 2 (8.1.6) using ODBC. Both the clients and the server
are running Windows 2000 Professional. I get the error
"[Oracle][ODBC]Invalid datetime format" whenever I have a DATE
column with a NULL value in it. I tried downloading the latest
ODBC driver from the Oracle web site but this did not solve the
problem. Right now our only solution is to make all the
DATE columns NOT NULL. Do you have any other suggestions?

Using ODBC without the 8i or 9i Client

Connecting Access.mdb on a windows station to Oracle 8i or 9i using ODBC
Can an oracle ODBC driver be installed programatically on a station without installing the complete 8i or 9i client?
The Microsoft ODBC driver for Oracle produces a message stating that the client needs to be installed.
Perhaps there is an automated way of installing the client by running a script or something.
Ideally there would be a method of using one setup program on any station that would install all required elements for this application including the Oracle ODBC driver.
Would InstallShield contain an Oracle ODBC driver that would work on 8i and 9i?

In order to use the Oracle ODBC driver or the Microsoft ODBC driver for Oracle, the Oracle client needs to be installed. You can invoke the Oracle Universal Installer from InstallShield (optionally with a response file), but I'm not aware of a more 'integrated' solution.
If the Oracle client is too large a fottprint, there are third parties (i.e. DataDirect) that would be more than happy to sell you a wire-protocol ODBC driver that can run without the Oracle client.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Oracle Client Installation. ODBC "not configurable".

Hi people.
I need your help to solve a problem in a installation of Oracle XE Client.
I install Oracle XE Client in a Windows XP.
In Control Panel -> Administrative Tools -> ODBC
Later in the flap: Controlers
I don't see the "Oracle in XE" controler.
OK. I look in the directory and exists the sqora32.dll, etc. etc.
Do you know how resolve this?
Oks. That's my problem. Now I tell you what I do trying to solve it.
I find in other forums that I can utilize, the normal 10g client or use Instant Client.
Important question: If I take one of this solutions. Have a cost associated?
How much is the cost for instant client?
How much is the cost for normal 10g client?
The interesting of XE in this phase of my project is that is completly FREE !!!
It give me the opportunity of migrate in a later time to a more sofisticated version of Oracle but at this moment I dont complete my product. ;-)
I will try with this solution but I have intrigue and desire of drive the XE software not patch it.
The documentation is recurrent to a document that doesnt explain nothing about my problem.
I tried to register the dll with the following command:
regsvr32 C:\XEClient\bin\sqora32.dll
And obtained the following message (followed by other):
Error Cannot Load Resource File sqresus.dll
Do you know how resolve this?
Best regards
Roberto

vinay raj wrote:
Hello Stevens,
Thanks for the reply. I have installed 11g r2 64 bit client and I have tried this way too C:\Windows\SysWOW64\odbcad32.exe
Like I said, the (sysWOW64) is for the 32-bit. You now assert you installed 64-bit, so that is not applicable
but there were no drivers found. I didnot find any odbc folder in oracle client home. Could you please suggest what needs to be done next.
Now we know you installed 11.2 client. Like I said, the ODBC drivers are NOT installed by default on that version.
And so you need to do as I said in my last post:
do a default installation, then go back and do a 'custom' installation, specifying the same ORACLE_HOME as before, and selecting the ODBC components.
Best Regards
Vinay Raj Malla
Jr. Oracle DBA
Miracle Software Systems Inc,.

To install ODBC on Windows--Need Universal Installer 10.1.0.4 & Net Client

The instructions for installing Oracle ODBC for Windows requires Universal Installer 10.1.0.4 & Net Client. I cannot find where to obtain these from the download page. A colleague looked up Universal Installer 10.1.0.4 on the support area, but the best he could find was reference to a patch. I do not have nor want to install all of Oracle on my laptop just to have Oracle ODBC.
Where can I obtain these applications/tools and is there anything else that I need?

You have to have the Oracle client installed on your machine to be able to install the Oracle ODBC driver. This can either be a full Oracle client install or you can install the 10g Instant Client, which is a slimmed down version of the client. Both the regular client and the instant client are downloadable from OTN. The full client has a cleaner install process, the instant client is aimed more at corporate users that want to deploy the install as part of installing internal software, so it involves a bit more configuration by setting appropriate environment variables, etc.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Configure PDC domain for windows Client

Hello,
Forgive my approximate English.
I need help to install a server Mac with a domain Activate directory ( PDC) so clients Windows connect to it.
I installed th server Mac Os to create a master Open Directory.
Mac OS Server has to configure the DNS with host's name.
The customers Windows 8.1 see the server on the network.
They indeed answer Ping.
NSlookup does not return error.
But when I attempt to configure the domain on the client Windows, it does not find the server. (An error DNS returned?)
Thank you for your help.

foossile wrote:
Thx for your response.
t is possible then for the Mac Server to supply the following services for clients Windows:
- File sharing with rights.
- Management of group user.
- Possibility of imposing a police of security of password.
Thank you, it will be everything.
Yes a Mac server can provide file sharing to Windows users, yes it can set permissions for those files and folders being shared
No it cannot do the equivalent of Group Policies as used to manage Windows systems
Yes it can define rules for passwords such as length, how long before it must be changed, how often it can be reused, etc.

I have a client that uses Windows that has recently told me she can no longer open the PDFs I send her. I can't find this elusive "Always Send Windows-Friendly Attachments" setting that I have read may solve my problem. Can someone get me there?

I have a client that uses Windows that has recently told me she can no longer open the PDFs I send her. I can't find this elusive "Always Send Windows-Friendly Attachments" setting that I have read may solve my problem. Can someone get me there?

Dear Dan,
It was from InDesign that I was creating the shared pdfs. I was one of two Mac drivers in a corporate sea of Win users and had to make the change I mentioned in order for the Win users to see my pdfs for review. The difference from what you appear to be doing was that were all on an MS Exchange Server so the files were shared over the company's Exchange Server e-mail system. However, some of these files occasionally went to outside users via regular e-mail and those people had no issues either.
So what I did was tested and worked for years.
You might look at the Adobe forums or Knowledge Base to see if that is a reported issue with newer version of CS. I was on CS2 when I was doing this, and the other Mac driver was on CS3 but had no problems either.
Some Win users I've talked to find a problem opening some pdfs (not mine) in general and found they had to open Reader first and them open the file from Reader's File menu. That most often happened if the client was using an outdated version of Reader.

How to scroll up and down in IBM client access using windows 7 on mac running bootcamp

How to scrool up and down in Client Access 5250 (AS/400 emulator) using windows 7 on Mac running boot camp. The key board does not function within the client access 5250 session?

You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
http://www.ifelix.co.uk/tech/
You may want to use Bonjour for Windows on your PC
http://www.apple.com/macosx/features/bonjour/
Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

File Transfer From Unix server to Windows Client System Using WebUtil

Hi all,
I want to Transfer a File from Unix Server to Window Client System using Webutil. But below mention code is not working.
DECLARE
     V_Server_Path VARCHAR2(500) := Null;
     V_Client_Path VARCHAR2(500) := Null;
BEGIN
     V_Server_Path := '/proj/oraapps/viper/dev/reports/cache/Saveauftr.txt';
     V_Client_Path := 'C:\Migration\EU_Applications\Lima\OAS_WorkArea\Client\Saveauftr.txt';
     IF WebUtil_File_Transfer.Is_AS_Readable(V_Server_Path) THEN
     IF WebUtil_File_Transfer.AS_To_Client(V_Client_Path,V_Server_Path) THEN
          Message('Downloading the File ..... .... ... .. .');
          Message('Downloading Was Successfull ...');
          Message('File Transfer from Server Was Successfull ...');
     END IF;
END IF;
END;
Can anyone suggest me,Why the above code is not working and what to do for solve the Problem.
Regards
Gany

Hello,
You have more chances to get an answer in the Oracle Forms OTN Forum :
Forms
Regards

DTW - Trouble using ODBC and Configuration Files

I am using SBO SP1 PL2 and DTW 2005.
I have been making use of saving the configuration for the import of an object and then using the command line to run it, as described in DTW help under "Schedule Run".
I typically use tab-delimited files saved from Excel and the above method works very well.
However, I would prefer to use ODBC directly from the template tables I have in a SQL database. It works perfectly using the GUI within DTW, and it lets me save the configuration file, but when I try to run DTW from the command line using ODBC, I get these error messages:
Can not connect to ODBC data source.
Can not get SQL handler.
Does anyone have any suggestions on how I can use DTW from the command line while using ODBC sources?
Thank you.

I've got the same problem.
I solve it once by editing the xml file's <ExID> tag from <ExID></ExID> to <ExID />
So the problem resides at the XML syntax.
My problem is that I lost the XML file I used and now I can't make it work again.
Have anybody found the solution at this problem or is there an updated version of DTW?

Exchange Server 2010 - Problem configuring my server 2008 so my clients can use Outlook to send/receive e-mails

Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advance

Hi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support

How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users..
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The desktop ( w/ASUS Crossfire V Formula-Z mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problems with exporting PWA views (grids in general) to Excel 2010 with Windows 8 + IE 10 as a client configuration

Hello,
I wondering if windows 8 + IE10 is a supported client configuration for PWA (Project Server 2010). I am unable to export PWA views to Excel 2010. No problems with Windows 7 + IE8/9
Any ideas?
thanks,
Daniel
Daniel Villacis

Hi,
We followed the below steps in the local machine and check the behavior.
a. Open the Windows registry editor (regedit.exe)
b. Go the location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\excel.exe
c. Here, you’ll see a string value named “useURL”
d. Rename this value to something else. For example “useURLx”
Note: You might have to restart the machine to apply the registry change to take effect.

OBIEE11g client configuration using odbc on windows 32

Similar Messages

Maybe you are looking for