OBIEE11g: Set user privileges to  Open RPD in Read Only mode.

Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.

863866 wrote:
Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.Hi,
I don't think it's possible, can go with metadata dictionary option which is also help to analysis RPD.
refer section,
http://docs.oracle.com/cd/E23943_01/bi.1111/e10540/utilitiesexprbldr.htm#BIEMG325
Thanks
Deva

Similar Messages

  • My Finder is opening folders in Read-Only Mode.

    When I click on Finder. A folder is opening in read only mode. When I open any folders in it, then a new window is opened again in read only mode.
    Just the "New Finder Window" is having this problem.
    Please help me out with my problem. I want the Finder to open windows normally rather than in read only modes.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

  • Unable to open database in READ ONLY mode

    When trying to open database in READ ONLY MODE it says needs recovery. How ever database opens succesfully in READ WRITE MODE.
    1) Startup mount
    2) SQL> ALTER DATABASE OPEN READ ONLY;
    ALTER DATABASE OPEN READ ONLY
    ERROR at line 1:
    ORA-16005: database requires recovery
    But database opens succesfully when opened in READ WRITE mode.

    user12038051 wrote:
    When trying to open database in READ ONLY MODE it says needs recovery. How ever database opens succesfully in READ WRITE MODE.
    1) Startup mount
    2) SQL> ALTER DATABASE OPEN READ ONLY;
    ALTER DATABASE OPEN READ ONLY
    ERROR at line 1:
    ORA-16005: database requires recovery
    But database opens succesfully when opened in READ WRITE mode.
    sqlplus '/as sysdba'
    shutdown imediate;
    startup;
    shutdown imediate;
    startup mount;
    recover database;
    alter database open read only;

  • Office 2013 opens file in read only mode

    I have a client on Windows 8.1 Pro using Office 2013. When he access an office file from a network drive it opens in read only. When he saves the file to his desktop using save as it lets him open the file again in compatibility mode but he is unable to
    then overwrite the file on the network folder. It keeps giving him a permission error. I have deleted his profile, changed settings in office trust center settings and checked folder permisisons. I am out of ideas. Can anyone help me out here.
    Thanks

    Hi,
    Thanks for the reply.
    From the user, "Every file that I open, opens in read-only mode.  It appears that the security is set correctly and I have not changed anything, but, it does not allow it.  I have tried rebooting - not solved.  I tried disconnecting the shared drive and reconnecting - not solved.  However, when I do disconnect the mapped drive, I get a warning saying I have files open.  The problem occurs whether I access the files from the mapped drive or directly by drilling down through the folder structure." 
    When I try to move files over to the drive it says I do not have required permissions to overwrite or move a file. On a different computer he has full access but not on this one. Also the settings in trust center settings for file blocking and trusted locations
    also privacy.

  • Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

    I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed.  When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
    "Windows cannot find '<path to file>'.  Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click Search."
    Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls".  The number seems to increment up each time it happens.
    Now here is the strange part.  If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
    I Googled the error I was getting and found KB211494.  It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case.  Any other ideas?  This is
    really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

    This may be a file association problem.  To solve that:
    In Windows 7:
    1. Right-click the file,
    2. Select "Open With" 
    select [Your Program Here]
    3. Check always use this program. 
    In Windows XP:
    1. Locate the file as you have described above
    2. Right click the file
    3. Select Open with from the pop-up menu
    4. Click Choose default program…
    5. Select Excel in the Recommended Programs box
    6. Check Always use the selected program to open this kind of file
    7. Click on OK.
    1.  Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
    2. Take a registry backup using the steps given here
    3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
    4. Exit Registry Editor
    5. Undo Step 1 to make Excel available.
    6.  Restart the computer and verify it the issue is fixed.
    If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

  • Open CRMM_ACCOUNT in Read-Only-Mode

    hi,
    i want to open the application CRMM_ACCOUNT out of a bsp application in a new window. Ok, no problem... (thanks to all the posts before )
    BUT: How can i open the Account in read only mode?
    yours Michael

    Hello,
    If you look into the standard of MAC CL_BSP_ACC_ACCMOD, you will find in read method of super class CL_BSP_BP_ACCMOD the following coding :
      Activity "display": don't allow to change anything
        IF gv_activity = gc_activity-display.
          CALL METHOD cl_bsp_bp_global_service=>set_field_attr
            EXPORTING
              iv_object_key            = ls_object-object_key
              iv_screen_structure_name = iv_screen_structure_name
              iv_field_property        = gc_no_change
            CHANGING
              ct_field_attribute       = et_field_attribute
              ct_dd03p                 = gt_dd03p.
        ENDIF.
    So, the only way to put the account application in display is to work on the fields attributes.
    Regards,
    Fred

  • Adobe reader wont let me highlight, and opens pdf in read only mode, why?

    I need help with highlighting pdf, and tke it out of read only mode . When i go to the text edit thing it say "To modefy this document save a copy on device" Its already on my device, so why does it say that? I was able to highlight this pdf before. Was there a recent update that diabled highlighting ?

    What is your operating system?  Reader version?  Are these PDFs writable or read-only on your device?

  • GPO settings - documents in sharepoint 2007 sometimes open in read-only mode - needs IE reset to fix

    Hi,
    We've got an intranet running on SharePoint 2007.
    We also enforce alot of group policies to our users.
    But there is a problem that keeps reoccuring:
    On random moments, when a user tries to edit a document on any random document library in SP 2007, it gets opened in read-only mode.
    The only temporary fix we found for this is resetting the IE settings in Internet Options -> 'tab' advanced -> Reset IE settings... and pressing Reset.
    We think it is some GPO setting that we have malconfigured or forgot to configure and we hope that someone could point us  in a direction to troubleshoot or even solve this.
    Thanks in advance for reading and providing help.
    Inkendaal

    Hello,
    I also suspect that there might be issue with IE plug-in so could you confirm that? you can also tell su what plug-in you see in IE.
    You might also want to look at this similar threads:
    http://stackoverflow.com/questions/19164313/sharepoint-opens-documents-in-read-only-mode-for-users-with-office-2010
    http://social.technet.microsoft.com/Forums/windows/en-US/a0849e73-d347-4d12-8424-9d5bb6bfb004/all-office-files-from-sharepoint-are-opened-read-only?forum=w8itproappcompat
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Issue regarding open word file and read only mode using c# & MS-word interop

    i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
    actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
    here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
    private void button1_Click(object sender, EventArgs e)
                object fileName = "";
                string filePath = "";
                string strSaveasPath = "";
                DialogResult result = openFileDialog1.ShowDialog();
                if (result == DialogResult.OK)
                    fileName = openFileDialog1.FileName;
                    //strSaveasPath = Path.GetDirectoryName(path.ToString());
                //fileName = "Z:\\C0000000003.doc";
                List<string> _list = new List<string>();
                _list.Add("tridip");
                _list.Add("arijit");
                //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
                object textToFind = "test";
                object readOnly = false;
                Word.Application word = new Word.Application();
                Word.Document doc = new Word.Document();
                object missing = Type.Missing;
                try
                    doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing);
                    doc.Activate();
                    object matchPhrase = false;
                    object matchCase = false;
                    object matchPrefix = false;
                    object matchSuffix = false;
                    object matchWholeWord = false;
                    object matchWildcards = false;
                    object matchSoundsLike = false;
                    object matchAllWordForms = false;
                    object matchByte = false;
                    object ignoreSpace = false;
                    object ignorePunct = false;
                    object highlightedColor = Word.WdColor.wdColorGreen;
                    object textColor = Word.WdColor.wdColorLightOrange;
                    object missingp = false;
                    Word.Range range = doc.Range();
                    foreach (string line in _list)
                        textToFind = line;
                        bool highlighted = range.Find.HitHighlight(ref textToFind,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing);
                    System.Diagnostics.Process.Start(fileName.ToString());
                catch (Exception ex)
                    Console.WriteLine("Error : " + ex.Message);
                    //Console.ReadKey(true);
                finally
                    //doc.Close(missing, missing, missing);
                    if(doc!=null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                    if (word != null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                    word = null;
                    doc = null;
                    GC.Collect();
                    GC.WaitForPendingFinalizers();

    I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
    The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
    Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

  • Database Open in Read Only Mode

    Hi
    I would like to open database in read only mode
    like
    SQL> startup mount
    SQL> ALTER DATABASE OPEN READ ONLY
    this will open database for read only mode for all user
    i want to give read write access on database to one user
    any idea how i can proccess
    Thanks
    Chetan

    Hi,
    Alter database open read only;
    this should work fine and everything will be in read only mode. Hence if any auditing is going on and audit_trial=db then it fails to open the database in read only mode.
    If you want to control only users to stop writing to it, you may remove tablespace quotas for those users. Also, you may control them through grants. Remove any current grants assigned to them or to roles through which the grants are assigned.
    Several ways to do this. If you tell us the particular scenario then we might help in getting a solution.
    Regards,
    Vasu.

  • How to set user privilege

    i want to NEW USER excute procedure which
    is other schema!
    i want not to use prefix for execute procedure!
    how to set NEW user privilege?
    null

    Hi
    I create a user in a Database using SQL developer,
    so it is a Database User.
    Now I want to give this user access to some table in
    read , write mode and just let it to read some other
    tables.
    how i can do this ? SQL*Developer currently doesn't support security admininstration through the GUI, but you can use sqlworksheet to issue grant statements.
    grant select on mytable to otheruser1;
    grant select,insert,update,delete on mytable to otheruser2;
    It looks like that when we create a use SQL developer
    create a schema for that user , how i can make more
    users without creating Schema for each of them ?
    A schema is the collection of objects owned by a user. A user can exist without owning any objects.
    If you are using XE, you might be better off using the XE GUI to manage this.

  • Acrobat X: browser plug-in always opens PDFs as read-only

    Hi all
    I have just installed the trial of Acrobat Pro X on my Windows 7 Ultimate 32-bit PC. Prior to this I uninstalled other PDF software (Acrobat 7 and Foxit Reader).
    The problem is that the setting in Acrobat preferences to NOT open PDFs in my browser as read-only seems to have no effect.
    Specifically the setting is at Edit > Preferences > Internet > Web browser options > Display in read mode by default
    Whether this is checked or unchecked, PDFs viewed in either browser on my PC (IE8 or Firefox 3) are opened in read-only mode. One very inconvenient consequence of this is that I cannot annotate PDFs in my browser.
    I tried running Acrobat as administrator and changing the setting, but this similarly had no effect.
    I expect I will be met by a wall of silence if I attempt to get help about this from Adobe as a lowly trial user -- but it's crucial to deciding whether I want to buy the upgrade to Acrobat X. Can anyone reproduce the issue?
    Thanks...

    That option is nothing to do with the PDF being editable, it's to control the display of the toolbars. "Reading Mode" is when the toolbars are hidden and the black head-up display navigation bar appears at the bottom of the screen.
    PDFs displayed within a web browser with Acrobat/Reader X are not editable, nor can you apply markups, unless you're within a browser-based-review workflow. You have to save a copy locally and open it in desktop mode to make any changes.

  • Opening the file in read only mode

    hi all,
    i am using
    i want to open any type of files in read only mode using host command.so first i am setting the attribute to read only and then opening the file. But still the opened file is editable. i have written like below
    Host( 'cmd /c  attrib +r "\test_folder\testing\PURCHASE_ORDER\'||:PO_FILE_NAME||'"',NO_SCREEN);
    Host( 'cmd /c "\test_folder\testing\PURCHASE_ORDER\'||:PO_FILE_NAME||'"',NO_SCREEN);is this is the way to open the file in readonly mode?
    Along with the above the files which i opened with the help of above said code those files i am not able to delete also.(i have to delete the selected file)
    i thing when i am setting the attribute something is going for a mess!
    Please help.
    Thanks..
    Edited by: GD on Jun 23, 2011 2:25 AM

    hi,
    Read only means you cannot mofiy the file. This also includes that you cannot delete a readonly-file yes,
    what i am doing is i have three button in my layout 'save','view' and 'delete'.
    1.so when user press 'save' button after selecting the file then the file gets saved into the specified.
    2. when user press 'view' button the file has to open in read only mode.
    for this i have written above mentioned code(but still i am able to edit the file)
    3.when user press 'delete' button the file has to be deleted from the specified location.
    so my problem is after setting file to read only mode, i am able to edit but i am not able to delete it.
    What i am using to set the file to read only mode is right?
    Please help.
    Thanks..

  • Opening a container in read-only mode (DB_RDONLY, setReadOnly())

    I have one process access a container in normal mode and another accessing it in read-only mode (XmlManager::openContainer with DB_RDONLY or XmlContainerConfig. setReadOnly(true) ), both with transactions. Is this:
    (1) wrong (potentially dangerous);
    (2) pointless (no benefits for the read-only process);
    (3) reasonable (potential benefits for the read-only process)?
    Whatever the answer, why is it so?
    Michael Ludwig

    hi,
    Read only means you cannot mofiy the file. This also includes that you cannot delete a readonly-file yes,
    what i am doing is i have three button in my layout 'save','view' and 'delete'.
    1.so when user press 'save' button after selecting the file then the file gets saved into the specified.
    2. when user press 'view' button the file has to open in read only mode.
    for this i have written above mentioned code(but still i am able to edit the file)
    3.when user press 'delete' button the file has to be deleted from the specified location.
    so my problem is after setting file to read only mode, i am able to edit but i am not able to delete it.
    What i am using to set the file to read only mode is right?
    Please help.
    Thanks..

  • How to modify edit/read mode pop up for documents in "SP2013" to open in only read only mode

    Hi,
    When opening a document the users of my site and including me are getting a pop up asking to open it in read only or edit mode. We want to disable the edit option for end users. Those are confidential doc's. 
    We want them to open only in read only mode. How can it be achieved.
    Can we FORCE a read-only open of the document without giving anyone the option to open in edit mode? I don't have access to Central Admin. Hence kindly let me know if there is some javascript
    code that i can use to do this from browser.
    thank you !

    Hi Prajk,
    If users have edit permission on the documents in this library, even if we disable this dialog (by disabling the add-on "SharePoint OpenDocuements class" from IE browser), the users sitll could download the documents to local machine, and
    edit the documents in client Office application, then sync to library.
    If you want the users to read these confidential documents only, you can only grant the users read-only permission on the document items or on library level, then they could unable to edit these confidential docs, note to give proper users
    proper permissions.
    If you also want that the confidential docs could be opend and read-only in client Office application, you can configure the IRM (implemented by RMS) for SharePoint server, then set the document items in the library read-only for
    some users.
    https://technet.microsoft.com/en-us/library/hh545607%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    https://support.office.com/en-in/article/Apply-Information-Rights-Management-to-a-list-or-library-6714cfe3-ef39-43b0-bb65-a887726bb63c?CorrelationId=ebcf6a01-1d3c-4b75-86ae-c11322065be6&ui=en-US&rs=en-IN&ad=IN
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for