Object directory entries

When I am trying to change the package I am getting the following error message.
Object directory entry R3TR DTEL ZZADJ_PER locked
for request/task DEVK900251
How to change the object directory entries which are part of a request/task?
Please help.
Thanks,

As I told you before as long as you dont unlock those objects you can not change the package. Please unlock and then try to change the object directory entry. Create a new transport of copies and release the old transport. The released transport will not go anywhere. Dont forget to check the options on the unlock entries (expert tool).

Similar Messages

  • Mass change in object directory entry

    hi Experts ,
    we have a problem in object directory entry of some near 1600 objects which want to change in a single go , can any one help us on this??
    We have searched SDN already and do find similar questions but no relevant answer , please help.
    If we try to change it through Se03 it asks to do it objectby object whch is a very time consuming activity .
    Br,
    Sunny.

    In SE03,
    You can give wild character if the object names starts with for example A* and then you can block select.
    or if you go by further restriction(for example by package name), you can able to list all of the objects under the package.
    This way you can block select it and change the object directory.

  • Changing Object Directory Entry of Infocube - urgent

    Hello -
    I have an infocube that is already assigned to a package (not $TMP).
    How can I reassign it to a different package. 
    When I try to reassign via Cube change, the package field is greyed out.
    I have deleted all data, deactivated the cube + aggregates.  There a re queries still attached to the cube though.  But cannot change the Object Directory Entry.
    Help solicited.
    thanks.
    -abhi

    Abhi
    In case of BW, there could be more than one package.
    One for Backend development (like cube, ODS, update rules, info objects etc) and one or more for Reports.
    So in ur case, the cube would always be alloted to the same package! You would only create new requests....
    let me know if you have more questions.
    prakash
    Assigning points on SDN is way of saying thanks!!

  • Howto find according object via object directory entry?

    Hi all,
    I need to write a program that checks an ABAP source whether it is a local object ($TMP) or not. I know that I can search for the DEVCLASS in table TADIR. But in order to do so I first need to get the according object from the object directory entry of this ABAP source.
    For example, I could check the function module "ZZZ_FUNCTION_MODULE", which is a function of the group "ZZZ_FGROUP". The according object directory entry is therefore "R3TR-FUGR-ZZZ_FGROUP". My qustion is: how can I map from "ZZZ_FUNCTION_MODULE" to "R3TR-FUGR-ZZZ_FGROUP"?
    Thanks in advance for your help!
    Kind regards; Matthias

    The problem is that I do not necessarily know whether it is an function module or not.
    For example, it could also be an include that I want to get the according object for...

  • Mass Object Directory Entry assignment

    Hi gurus.
    I got a bundle of InfoObjects with $TMP package assigned to.
    Is there any possibility in BI to do mass Object Directory Entry assignment of <my BI package>  instead of $TMP to InfoObjects?

    hi Gediminas,
    Go to tcode: SE80 it is called as Object Navigator, there you can create a package on your own, after creating the package all the objects will go into that package, after you create the package you will get a request number, and you have to give that request number when you do for mass objects entry.
    regards,
    raghu.

  • Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

    Hi BW Experts,
    I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
    Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
    A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
    Thanks in advance for your help.
    Best regards
    Christian

    Hi Abdullah,
    I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
    So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
    I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
    I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
    Anyway, thanks to all of you for your help!
    Best regards
    Christian

  • Object Directory Entry

    Hi folks,
    I need to distinguish a function group and a function. My problem is that both have the same object directory entry.
    I must know if there is another attribute to distinguish them. If yes where to find?
    Thanks in advance.

    Solved.
       IF wa-object = 'FUGR'.
          SELECT *
          FROM enlfdir
          INTO CORRESPONDING FIELDS OF TABLE t_enlfdir
          WHERE area = wa-obj_name
           AND  generated <> 'X'.
          IF sy-subrc EQ 0.
            LOOP AT t_enlfdir INTO wa_enlfdir.
              wa-obj_name = wa_enlfdir-funcname.
              APPEND  wa TO h_itab.
              help_counter = help_counter + 1.
            ENDLOOP.
          ENDIF.
        ENDIF.
        CLEAR wa.
        counter = counter + 1.
      ENDLOOP.

  • Object directory entry reverse lookup

    Hi all,
    Is there a quick way to trace an object directory entry (i.e. 46580GGOBLSFRS7P42HKLRFFF)  back to an InfoObject or other object? I've got an error in a transport and I'm trying to trace back to see which specific object I have issues with. The transport log only refers to the object by its directory entry.
    SU03 and SE80 have not given me this functionality (by trying so far). No luck using the transport organizer "manually" looking for the entry either.
    Many thanks for any input!
    Regards,
    Petter
    Message was edited by: M Petter

    Hi Petter,
    Try to search in DB table RSZELTXREF & RSZELTTXT.
    Go to SE11/16 and type in the above table name and enter the element 46890... in the first field and hit execute.
    If you cant find the any results in there, search in other lookup tables start with RSZ*.
    Hope this helps.
    Praveen
    Message was edited by: Praveen Vujjini

  • Object Directory Entry Transport

    Gurus
    I have a small question.
    When I collect a infobject in one request it goes into
    Object Directory Entry  R3TRIOBJZMATACNT.
    Please explain what is this.
    Many greetings gurus

    George not sure if i understood well your question
    but if your question is : is my infoobject collected in a transport request that i can send to qualification system or productive system then it is yes.
    All infoobject that are collected in transport request are inserted as R3TR IOBJ --> name of the IO
    hope this could help you
    if not do not hesitate
    regards
    Boujema

  • Object directory entry when trying to release TR

    Dear experts
    I have a problem when trying to release my TR in Development to Testing.It prompts me an error "Not all objects in the request could be locked. Do you want to release them anyway?"
    Then I viewed the error and the error says:
    "Object XXX requires a directory entry"
    Do you have any idea how to go around this problem?
    Thanking you in advance
    Wan

    Hi,
    Check the Authorizations and Owner. What is the Message you are getting?.
    Check
    Re: Transport
    Re: When releasing a transp. req.not all object in the request could  be locked
    Thanks
    Reddy
    Edited by: Surendra Reddy on Jun 23, 2010 9:10 AM

  • Changing object directory entry from $TEMP to a different package

    I have saves SAPscript in $TEMP. How do I change it to a particular object directory ?
    Thanks.
    Regards,
    Tushar.

    Rajesh,
    Go to SE80 -> Give Development class = $TMP
    and you get all the objects under that class, select the desired object and right click on that one, you can see REASSIGN.. if you entered the desired development class then it will be reassigned.
    Suresh

  • Object dir entries reconciliation..

    Hello,
    Problem description:
    When trying to transport via transport connection, I get the error message that objects ned to be tansported separately. I have collected only necessary objects and collected automatically. This has worked for med in earlier systems, but not here.. so something is strange.
    I have switched BW development system from ABD to ABT. Some objects were transported from ABD to ABT and are hence assigned to a certain package. In ABT I have then set up a new transport layer/routes etc. and also created a new package for transportation purposes.
    So now I have a messed up system when it comes to object directory entries. Some objects seems to be assigned to the old package Z001 and some to the new Z002. Some objects have source system ABD (the old BW dev) and some have ABT. Some also have SAP.
    How can I reconcile all of this? I guess I will need all the objects to belong to Z002 with source system ABT (the new BW dev system)..
    When collecting the transport in the transport connection, and looking in "package", I don't see any package aassigned to the different objects..
    I get the error message:
    "changes cannot be made" & Object xxxx xxxxxx cannot be saved to order" (100s of objects)...
    How do I proceed?
    Br,
    F C
    Message was edited by:
            F C
    Message was edited by:
            F C

    Hello and thanks for your input!
    The old transport route was ABD --> ABT --> ABP, Now there has been a change of transport routes to ABT --> ABQ (new sys) --> ABP.
    Already in the first setting, there was a problem with the collection of transports. Therefor, I had to install parts from Business Content directly in ABT. Some was however transported from ABD.
    When everthing was in place in ABT, I deleted the old TMS settings and created new transport routes etc.
    I have confirmed that the new routes are working. However I think that there is a mix up in the object directory entry now... Do you agree?
    When looking in SE03 (object directory entry), I see that there are object entries with ABD set as original system and belonging to the old package (that was used for transports from ABD --> ABT)..
    When collecting objects in the transport organizer I get lots of errors. When looking at these objects in SE03, I see that these seem to belong to the correct package and original system (according to the new setup).. Then why don't they work?
    Any ideas on how to make this work?
    Regards,
    F C
    What is needed in order to make this work?

  • Mass change of object catalog entries

    Hi All,
    Here is an issue where I need your help:
    I have a transport from another system with ~100 objects and I need to change their original systems.
    I started it with "SE03 -> Change Object Directory Entries of Objects in a Request", but it takes too much time (double click -> change -> save) * 100...
    Is there transaction where I can change these objects' original systems within one step?
    Thanks,
    Gabor

    Hallo,
    it's a long time since the original question, but since this has been posted in SDN so many times : how to mass change a package or original system in SE03 (SE03 / report RSWBO051/RSWBO052). The solution is to select the objects you want and enter MASS in the OK-code.
    Regards
    Jan

  • Cretaion of UTL.File in Oracle 10G and directory entry in Ora.ini file

    Hi,
    Kindly advise me if:
    (!) we can create a directory and log file in this directory on some other server instead of creating it in the file system of the server where the Oracle 10G database is residing?
    Created directory in Oracle using create or replace directory command.
    My package will be creating a log file using UTL.File in the above directory.
    I want to create this directory on some other server to save my log file/s. Is this possible?
    (2) Also, let me know in Oracle 10G, do we need to add the directory entry (mention above in #1) in the Ora.ini file on the Oracle 10G server?

    Hi,
    1) utl_dir are different from directory object
    2) you cannot create directory on remote server and there is no need to write directory entry on oracle init file (not ini..)
    Acr

  • No free space in directory entries for NTAB buffer

    Gurus ,
    In ST02 -> for table definitions buffer there was a red alert with the SWAP count as 953275 .
    hence i Double clicked on the swaps count to see the details , which is shown below ,
    efficiency :
    hit ratio  70
    size :
    allocated : 6799
    available  : 5703
    used        :5703
    free         : 0
    Directory entries :
    available : 20000
    used      : 20000
    free        : 0
    swaps :
    objects swapped : 953833
    frames swapped  : 0
    what will happen if the 'directory entry '  and 'size' is zero we.
    what process will get affected because of this ?
    what i need to do next ..
    guide me gurus

    Hi Susin,
    To Answer your question, directory free entries are '0' --> which means table definition buffer is full. That is the reason we can see "objects swapped : 953833"
    Try to increase the size of table definition buffer which is low '6799' now.
    I feel you can even  double the value and observe the performance.
    For General information regarding Hit ratio and Swapping:
    The quality of a buffer and how often it is accessed is measured by the
    '%Hit Ratio'. This value will indicate if the information stored in the
    buffers, such as table entries, programs and screens, is being hit
    directly from the buffer itself or, on the other hand, if the system
    needs to bring that data from the database since it was not found in the
    buffer.
    To find out the buffers with poor quality, first check the system
    startup time. When the system is started, all buffers (except the
    program buffer which has a pre-load) are initially empty. Therefore,
    all objects that are accessed for the first time have to be read from
    the database and then loaded into the buffers.
    If objects are not yet in the buffer, the hit ratio for the buffer will
    be low. The hit ratio increases from the time objects are loaded into
    the buffers. The rate of the increase depends on the workload in the
    system and is different for each buffer.So it is to be noted that how often you restart the system which resuls in the loading of object again and causes hit rate to be low.
    Poor buffer quality is not always due to a real problem. For example,
    transports into a system can reduce buffer quality. Keep in mind though
    that a value lower does not always shows that you have a problem.
    Swapping occurs when the buffer is full, and the SAP System has to
    load additional objects into the buffer. Objects in the buffer that
    were used the least recently are removed. In this context, the term
    "swap" means the objects removed from the buffer are lost and cannot
    be replaced until a new database access is performed (replacing what
    was lost).
    There are two possible reasons for swapping
    1 There is no space left in the buffer data area
    The buffer is too small. You should increase the buffer size.
    2 There are no directory entries left.
    Hope this helps.
    For any other information, feel free to reply me.
    Thanks and Regards,
    Pavan Kumar Gali.

Maybe you are looking for