Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
Hi BW Experts,
I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
Thanks in advance for your help.
Best regards
Christian
Hi Abdullah,
I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
Anyway, thanks to all of you for your help!
Best regards
Christian
Similar Messages
-
VMM 2012R2 UR4 - Version 3.2.7768.0
Not sure when this started happening since I haven't had to update or create a new RunAs account in VMM in some time, but every time I do, either through the console or through PowerShell it throws an error about The specified directory service attribute
or value does not exist. The VMM Service account is the same as it always has been, and other than this issue everything with VMM is working fine. The full text of the error message is below.
I am hoping someone has some ideas because I don't have any more at this point.
------------------- Error Report -------------------
Error report created 12/22/2014 9:43:33 AM
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7768.0
P3(assemblyName)=Microsoft.Cryptography.DKM.dll
P4(assemblyVer)=3.2.7510.0
P5(methodName)=Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys
P6(exceptionType)=System.Runtime.InteropServices.COMException
P7(callstackHash)=d0d2
SCVMM Version=3.2.7768.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7768.0
Executable Name=vmmservice.exe
Executable Version=3.2.7768.0
Base Exception Target Site=140712994535888
Base Exception Assembly name=System.DirectoryServices.dll
Base Exception Method Name=System.DirectoryServices.DirectoryEntry.Bind
Exception Message=The specified directory service attribute or value does not exist.
EIP=0x00007ffa67d15bf8
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.Runtime.InteropServices.COMException (0x8007200A): The specified directory service attribute or value does not exist.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_IsContainer()
at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
--------------- exception.StackTrace ---------------
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_IsContainer()
at System.DirectoryServices.DirectoryEntries.ChildEnumerator..ctor(DirectoryEntry container)
at Microsoft.Incubation.Crypto.GroupKeys.ADRepository.EnumerateKeys()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.FindNewestKey()
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy)
at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext)
at Microsoft.VirtualManager.Engine.DKMUtil.Protect(Byte[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(Char[] data)
at Microsoft.VirtualManager.Engine.CryptoHelper.Protect(SecureString data)
at Microsoft.VirtualManager.DB.RunAs.RunAsDBAccess.UpsertRunAsAccount(RunAsAccountData data, SqlContext context, Boolean isAdd, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.AddOrUpdateObjectInDB(SqlContext context, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.UpdateDB(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.RunAs.RunAsAccount.Update(SqlContext ctx, Boolean setCredential)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetRunAsAccountTask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Version=4.0.30319.34014
BuildType=retail
Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Version=4.0.30319.34003
BuildType=retail
Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Version=6.3.9600.17090
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Version=4.0.30319.34230
BuildType=retail
Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Version=6.3.9600.16384
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Version=3.2.7768.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Version=3.2.7672.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7768.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Module=D:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 4356 (0x1104)
Managed Thread ID = 18
Native Thread ID = 5520 (0x1590)
MCITP | VCP4 | VCP5Hi,
You want userPrincipalName, not userPrincipleName.
http://msdn.microsoft.com/en-us/library/windows/desktop/ms680857%28v=vs.85%29.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
/etc/oratab (a file or directory in the path name does not exists)
Hello All,
I ma trying to create a database oracle 11g R2 on AIX 6.1.
But i am facing the below error at the beginning of the installation:
/etc/oratab (a file or directory in the path name does not exists)
Your help pls..When I am trying to run root.sh. it gives the below error:
IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1> ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle11
ORACLE_HOME= /apps/oracle/oracle11/app/product/11.2.0/db1
Enter the full pathname of the local bin directory: [usr/local/bin]: /usr/local/bin
Creating /usr/local/bin directory...
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
./root.sh[14]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_rdbms.sh: not found.
./root.sh[16]: /apps/oracle/oracle11/app/product/11.2.0/db1/rdbms/install/rootadd_filemap.sh: not found.
IST76SIT:/apps/oracle/oracle11/app/product/11.2.0/db1> -
OWM says "The directory OH /owm/wallets/oracle" does not exist
Hello, RHEL 6, x86-64
Oracle 11.2.0.4 Ent Edition
I just upgraded the database from 11.2.0.3 to 11.2.0.4. User reports "ORA-28365: wallet is not open" while trying to access tables in a certain schema.
I have little experience with Wallet so I find out that I can "open" the wallet using OWM. I start OWM and follow the instructions in section 9.4.3 of http://docs.oracle.com/cd/B28359_01/network.111/b28530/asowalet.htm#i1006711, and after step 2 which is to select a directory for the wallet, it tells me, ""The directory <OH>/owm/wallets/oracle" does not exist". Ahh! (By the way, this was when I was pointed to the ORIGINAL oracle home (11.2.0.3) because I wanted to see if the wallet existed there.
Now I am moderately panicked. What do I try next? I gotta get the wallet open!
Thank you in advance for taking the time.
Humbly,Hi,
If you have TDE encrypted objects, one must open the wallet from the sqlplus.
1) make sure the sqlnet.ora from your $ORACLE_HOME/network/admin has ENCRYPTION_WALLET_LOCATION parameter set, example:
ENCRYPTION_WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /home/oracle/wallet)
2) connect as sysdba and run:
alter system set encryption wallet open identified by "wallet_password";
3) select wallet status and path from : select * from v$encryption_wallet;
4) select again from the encrypted objects -
P16B Error : Entry pernr date VA does not exist in T5W/G
Hi
We are facing an error wherein we are not able to update the salary package details (FBP) using transaction P16B.
It throws an error saying "Entry <pernr> <date> VA does not exist in T5W/G" before the screen loads.
On debugging we found the error occurs in HR_SPA_VARIANT_GET function module where it checks for entry in the table T5W7G.
The entry in the above table is not getting created even if update using P16B_ADMIN.
The error is getting rectified if we manually create the entry in the table T5W7G and T5W7I for both VA and VB.
I am unable to find a configuration node for creating the entries in the table's T5W7G and T5W7I .
Please advice on how this error is to be rectified.Hi
You have to either fix this in configuration through SPRO or If it is not solved through SPRO then you have search for an SAP note.
Thanks & Regards
Jyo -
Bursting Problem - A file or directory in the path name does not exist
I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike -
Error message: Entry 1 WC 99 does not exist in T508A (check entry)
Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PMyou have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR
-
Processing routine ENTRY in program ZRVADIN0111 does not exist for smartfor
Hi ,
This is the log , I am getting in vf02 ..
==========log==============
Message Text
Processing routine ENTRY in program ZRVADIN0111 does not exist
Technical Data
Message type__________ E (Error)
Message class_________ VN (Output control)
Message number________ 068
Message variable 1____ ENTRY
Message variable 2____ ZRVADIN0111
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 0
Sort criterion________
Number________________ 1
======================================end log========================
My driver program is same as below and form is ZSUNDRY_INVOICES_VENU'
================my driver program ===================
*& Report ZRVADIN0111
REPORT ZRVADIN0111.
TABLES : nast.
*TYPES : BEGIN OF ty_header,
vbeln TYPE vbeln_vf,
fkdat TYPE fkdat,
XBLNR TYPE XBLNR_V1,
STCEG TYPE STCEG,
kunrg TYPE KUNRG,
name1 TYPE AD_NAME1,
city1 TYPE AD_CITY1,
post_code1 TYPE AD_PSTCD1,
street TYPE AD_STREET,
total TYPE NETWR_FP,
END OF ty_header.
DATA : sum TYPE i VALUE '0'.
*TYPES : BEGIN OF ty_item,
matnr TYPE matnr,
arktx TYPE arktx,
fkimg TYPE fkimg,
VRKME TYPE VRKME,
netwr TYPE NETWR_FP,
MWSBP TYPE MWSBP,
unipr TYPE NETWR_FP,
END OF ty_item.
DATA : gs_header TYPE zsd_inv_header,
it_item TYPE STANDARD TABLE OF zsd_inv_items.
FIELD-SYMBOLS : <fs_item> TYPE zsd_inv_items.
DATA : gv_adrnr TYPE adrnr.
*data: s_vbeln type vbeln_vf.
*select-options : so_vbeln for s_vbeln.
*START-OF-SELECTION.
*form entry.
*--- Get header
SELECT SINGLE vbeln fkdat xblnr stceg kunrg bukrs
FROM vbrk INTO gs_header
WHERE vbeln = nast-objky.
SELECT matnr arktx fkimg vrkme netwr mwsbp
INTO CORRESPONDING FIELDS OF TABLE it_item
FROM vbrp WHERE vbeln = gs_header-vbeln.
LOOP AT it_item ASSIGNING <fs_item>.
<fs_item>-unipr = <fs_item>-netwr / <fs_item>-fkimg.
sum = sum + <fs_item>-netwr.
ENDLOOP .
gs_header-total = sum.
CLEAR : gv_adrnr.
SELECT SINGLE adrnr FROM kna1 INTO gv_adrnr WHERE kunnr = gs_header-kunrg.
SELECT SINGLE name1 city1 post_code1 street FROM adrc
INTO (gs_header-name1,gs_header-city1,gs_header-post_code1,gs_header-street)
WHERE ADDRNUMBER = gv_adrnr.
*end-OF-SELECTION.
data: fm_name type rs38l_fnam.
****calling entry routine
*FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen.
CASE retcode.
WHEN 0.
return_code = 0.
WHEN 3.
return_code = 3.
WHEN OTHERS.
return_code = 1.
ENDCASE.
*ENDFORM. "entry
calling smartfrom from ABAP
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSUNDRY_INVOICES_VENU'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IS_HEADER = gs_header
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
IT_ITEMS = it_item
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
*if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*endif.
end of call function module from abap
*endform.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can any body help me with proper code , i have to insert in driver program ..to retify error ...
thanks
Regards,
Venu.Call transaction NACE (type V1 for Sales Order) look for the required output type and check program and form in processing routines. (and add code markups when you copy source code in forums)
Regards,
Raymond -
Oracle 11.0.1.7:
When I run streams remove procedure I keep getting the following:
ERROR at line 1:
ORA-06564: object "ED"."BIN$eEXhW2fZlgDgQAoKUVFSiw==$0" does not exist
ORA-06512: at "SYS.DBMS_LOGREP_UTIL", line 82
ORA-06512: at "SYS.DBMS_LOGREP_UTIL", line 115
ORA-06512: at "SYS.DBMS_CAPTURE_ADM_INTERNAL", line 516
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_CAPTURE_ADM", line 422
ORA-06512: at "SYS.DBMS_STREAMS_ADM", line 1905
ORA-06512: at line 11I looked in dba_objects and have not found it. I also purged recycle bin. I also tried to create a table with that name but it says "object name already in use". How do I get rid of this object or this message?This is a recyclebin object. Maybe you purged the recyclebin, but there is still something in the queue for the object ?
What are you running to get this error ?
Is this from the collect side, or the apply side ? -
Object RV_BELEG number range interval 01 does not exist
Hi Gurus,
I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
Error Descriptio and Message:
For object RV_BELEG , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
Reporducing the error:
Screen flow: VA01 Intial Screen Input
Order Type: SD 'Subs.Dlv.Free of Ch'.
Sales Org :
Enter.
Next Screen: Click on "Complete Dlv" push butoon.
It will take to next screen go with "SAVE" option.
Iam getting an incomplete Delivery want to edit.
Go with "EDIT" and give Input in "ORDER REASON" drill down option.
select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
Provide Input In "Customer Group" drill down option select any one option from it.
Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
Here iam getting an status "Document is complete".
Click on "SAVE" option.
Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
This is the issue occuring with me while creating Sale Order from VA01.
help me if any one have know solution or suggestion to solve error.
Tnks & Rgds
BhaskarThis because of the missing SD Document Number Range.
You can check this in tcode SNRO for object RV_BELEG.
Ask your SD Consultant to Change the number range assignment or create that missing 01 number range number object.
This will solve your problem,
Regards
Karthik D -
Error "Processing routine ENTRY in program ztest does not exist"
Hi All ,
I facing problem in Samrt form driver program
Error "Processing routine ENTRY in program ztest does not exist"
when i given print through T.Code Me22n
Can you suggest me why i facing this problem.........
This is below my driver program code:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Mar 10, 2010 9:53 AMHi nIck,
I write the code this way
can you suggest me any changes are require
FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
PERFORM DATA_FETCH.
PERFORM DATA_PROCESS.
PERFORM CALL_FORM.
ENDFORM. "entry
*& Form data_fetch
text
FORM DATA_FETCH.
PONUMBER = NAST-OBJKY.
ENDFORM. "data_fetch
Regards
Raju
Edited by: raju mahapatra on Mar 11, 2010 7:23 AM -
Processing routine ENTRY in program ZINVOICE does not exist
Hi all,
I am finding an error after taking the print out of Excise Invoice in Tcode J1IP.
We had a requirement where we created new output type and changed the driver program for the output assignment earlier this invoice was developed in script we changed it to a smartform. and assigned in NACE.
Its working fine we r getting the printout also after getting the print out when I goto tcode VF02 a error log is being created
when i click on the error log its showing
Processing routine ENTRY in program ZINVOICE does not exist
Zinvoice is the driver program.
I hope to get inputs from you in resolving the issue.
Hope to get the reply at the earliest
Shivakumar K B
9886920258This error message is quite tricky and misleading one.
Make sure in your custom program, all the logic must be in a FORM-ENDFORM.
form entry.
Logic...
endform.
this form may have any name (not needed to be only ENTRY).
The signification of the form is that this name will be given in the subroutine name in NACE transaction.
the standard program RSNAST00 which triggers all the print program dynamically.
it will fetch the name of the print program and form name from TNAPR table and calls the same.
perform (TNAPR-RONAM) in (TNAPR-PROGNAME).
At run time, the TNAPR-RONAM and progname will be filled with your z program name and the subroutine name.
Rgds,
SaiRam -
Processing routine ENTRY in program zprog does not exist
Hi experts,
when i try to see print preview from ME23N it is showing status message like below....
"Processing routine ENTRY in program prog does not exist"
Message no. VN068
Any help....
Regards
RamAs per my understanding, when you press print priview sap script is called by this.
This sap script name and its driver routing in maintained in a database table .check t*
As per the message this is missing.You need to update the processing routing in this table.
Hope this helps you. -
Entry point 'Test Batch' does not exist
Hi Forum
I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint "Test Batch" "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer -
Error in infotype 0021 - Entry 14 1 04 does not exist
Hi experts,
I have one problem during key-in infotype 0021. When I choose fields relation, this message appear, '14 1 04 does not exist'.
Actually I have add data in table V_T577.Is that any config I should do besides this table. Thanks in advanceHI,
Please elaborate, do you mean that you are getting this error while selecting subtype for IT0021?
Regards.
Maybe you are looking for
-
Illustrator Lagging with Many small objects
Hi I am running Illustrator CS6, and I have found that Illustrator lags a lot when I have multiple objects that are very small. For example, for my school project I am creating four seasons, and I have multiple leaves on the trees, but since they ar
-
How to closed open app in 3G (don't have multitasking display like in 3GS and 4G)?
Since 3G has slower CPU and smaller RAM compare to 3GS and 4G, then I think it should be useful if we could completely shut down app when we stop using it.
-
EASY COST PLANNING at Network Activity Level
Hi All I am using EHP4 system. I want to do easy cost planning at NWA level for this I already activate ECP for NWA in configuration setting and other necessary settings but still when I create ECP from CJ20N or CJ9ECP I can not able to do ECP on NWA
-
Passing several fields to various classes and methods?
Passing several fields to various classes and methods? Hi there. I have an application that allows a user to define a configuration and save it. The user can edit an existing configuration, add a new one, or delete an existing one. Once a configurati
-
What's wrong w/ my xml?
Can anyone tell what is wrong w/ my XML? I keep trying to move this workout into the Latest folder to upload to Nike+site. I keep getting a message that the server couldn't accept. Thanks! <?xml version="1.0" encoding="UTF-8" ?> - <sportsData> <vers>