Object directory entry reverse lookup

Hi all,
Is there a quick way to trace an object directory entry (i.e. 46580GGOBLSFRS7P42HKLRFFF) back to an InfoObject or other object? I've got an error in a transport and I'm trying to trace back to see which specific object I have issues with. The transport log only refers to the object by its directory entry.
SU03 and SE80 have not given me this functionality (by trying so far). No luck using the transport organizer "manually" looking for the entry either.
Many thanks for any input!
Regards,
Petter
Message was edited by: M Petter

Hi Petter,
Try to search in DB table RSZELTXREF & RSZELTTXT.
Go to SE11/16 and type in the above table name and enter the element 46890... in the first field and hit execute.
If you cant find the any results in there, search in other lookup tables start with RSZ*.
Hope this helps.
Praveen
Message was edited by: Praveen Vujjini

Similar Messages

Mass change in object directory entry

hi Experts ,
we have a problem in object directory entry of some near 1600 objects which want to change in a single go , can any one help us on this??
We have searched SDN already and do find similar questions but no relevant answer , please help.
If we try to change it through Se03 it asks to do it objectby object whch is a very time consuming activity .
Br,
Sunny.

In SE03,
You can give wild character if the object names starts with for example A* and then you can block select.
or if you go by further restriction(for example by package name), you can able to list all of the objects under the package.
This way you can block select it and change the object directory.

Changing Object Directory Entry of Infocube - urgent

Hello -
I have an infocube that is already assigned to a package (not $TMP).
How can I reassign it to a different package.
When I try to reassign via Cube change, the package field is greyed out.
I have deleted all data, deactivated the cube + aggregates. There a re queries still attached to the cube though. But cannot change the Object Directory Entry.
Help solicited.
thanks.
-abhi

Abhi
In case of BW, there could be more than one package.
One for Backend development (like cube, ODS, update rules, info objects etc) and one or more for Reports.
So in ur case, the cube would always be alloted to the same package! You would only create new requests....
let me know if you have more questions.
prakash
Assigning points on SDN is way of saying thanks!!

Object directory entries

When I am trying to change the package I am getting the following error message.
Object directory entry R3TR DTEL ZZADJ_PER locked
for request/task DEVK900251
How to change the object directory entries which are part of a request/task?
Please help.
Thanks,

As I told you before as long as you dont unlock those objects you can not change the package. Please unlock and then try to change the object directory entry. Create a new transport of copies and release the old transport. The released transport will not go anywhere. Dont forget to check the options on the unlock entries (expert tool).

Howto find according object via object directory entry?

Hi all,
I need to write a program that checks an ABAP source whether it is a local object ($TMP) or not. I know that I can search for the DEVCLASS in table TADIR. But in order to do so I first need to get the according object from the object directory entry of this ABAP source.
For example, I could check the function module "ZZZ_FUNCTION_MODULE", which is a function of the group "ZZZ_FGROUP". The according object directory entry is therefore "R3TR-FUGR-ZZZ_FGROUP". My qustion is: how can I map from "ZZZ_FUNCTION_MODULE" to "R3TR-FUGR-ZZZ_FGROUP"?
Thanks in advance for your help!
Kind regards; Matthias

The problem is that I do not necessarily know whether it is an function module or not.
For example, it could also be an include that I want to get the according object for...

Mass Object Directory Entry assignment

Hi gurus.
I got a bundle of InfoObjects with $TMP package assigned to.
Is there any possibility in BI to do mass Object Directory Entry assignment of <my BI package> instead of $TMP to InfoObjects?

hi Gediminas,
Go to tcode: SE80 it is called as Object Navigator, there you can create a package on your own, after creating the package all the objects will go into that package, after you create the package you will get a request number, and you have to give that request number when you do for mass objects entry.
regards,
raghu.

Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

Hi BW Experts,
I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
Thanks in advance for your help.
Best regards
Christian

Hi Abdullah,
I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
Anyway, thanks to all of you for your help!
Best regards
Christian

Object Directory Entry

Hi folks,
I need to distinguish a function group and a function. My problem is that both have the same object directory entry.
I must know if there is another attribute to distinguish them. If yes where to find?
Thanks in advance.

Solved.
   IF wa-object = 'FUGR'.
      SELECT *
      FROM enlfdir
      INTO CORRESPONDING FIELDS OF TABLE t_enlfdir
      WHERE area = wa-obj_name
       AND generated <> 'X'.
      IF sy-subrc EQ 0.
        LOOP AT t_enlfdir INTO wa_enlfdir.
          wa-obj_name = wa_enlfdir-funcname.
          APPEND wa TO h_itab.
          help_counter = help_counter + 1.
        ENDLOOP.
      ENDIF.
    ENDIF.
    CLEAR wa.
    counter = counter + 1.
ENDLOOP.

Object Directory Entry Transport

Gurus
I have a small question.
When I collect a infobject in one request it goes into
Object Directory Entry R3TRIOBJZMATACNT.
Please explain what is this.
Many greetings gurus

George not sure if i understood well your question
but if your question is : is my infoobject collected in a transport request that i can send to qualification system or productive system then it is yes.
All infoobject that are collected in transport request are inserted as R3TR IOBJ --> name of the IO
hope this could help you
if not do not hesitate
regards
Boujema

Object directory entry when trying to release TR

Dear experts
I have a problem when trying to release my TR in Development to Testing.It prompts me an error "Not all objects in the request could be locked. Do you want to release them anyway?"
Then I viewed the error and the error says:
"Object XXX requires a directory entry"
Do you have any idea how to go around this problem?
Thanking you in advance
Wan

Hi,
Check the Authorizations and Owner. What is the Message you are getting?.
Check
Re: Transport
Re: When releasing a transp. req.not all object in the request could be locked
Thanks
Reddy
Edited by: Surendra Reddy on Jun 23, 2010 9:10 AM

Changing object directory entry from $TEMP to a different package

I have saves SAPscript in $TEMP. How do I change it to a particular object directory ?
Thanks.
Regards,
Tushar.

Rajesh,
Go to SE80 -> Give Development class = $TMP
and you get all the objects under that class, select the desired object and right click on that one, you can see REASSIGN.. if you entered the desired development class then it will be reassigned.
Suresh

Application directory Partition, Reverse lookup Zone , after Installation of Tree Domain

I have multiple domains (Windows Server 2008 Enterprize, and funtional level 2008) in an exisiting forest
after installation of new Tree domain i am facing the problem in creating reverse zone in DNS
Error message
"the partition to replicate zone data top all dns server that domain controllers on the active directory ws not created. The application directory partition operation failed. the domain controller holding the domain naming master role is down or unable
to service the request or is not running windows 2003"
plz reply soon i am facing a trouble .
Wajahat

The error message states that your domain naming master role holder is down or not responding.
First, you need to identify which one of your DCs is the holder of this FSMO role: You can use
netdom query fsmo command for that. If there is no DC that is currently holding this FSMO role then you need to size to one of them: https://support.microsoft.com/KB/255504?wa=wsignin1.0
If one of your DCs is holding the role then you need to check why it is not responding or unreachable. This could be checked by running
dcdiag on this DC to do a health check.
I would also recommend that you refer to recommendations I shared here: http://www.ahmedmalek.com/web/fr/articles.asp?artid=23
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Object dir entries reconciliation..

Hello,
Problem description:
When trying to transport via transport connection, I get the error message that objects ned to be tansported separately. I have collected only necessary objects and collected automatically. This has worked for med in earlier systems, but not here.. so something is strange.
I have switched BW development system from ABD to ABT. Some objects were transported from ABD to ABT and are hence assigned to a certain package. In ABT I have then set up a new transport layer/routes etc. and also created a new package for transportation purposes.
So now I have a messed up system when it comes to object directory entries. Some objects seems to be assigned to the old package Z001 and some to the new Z002. Some objects have source system ABD (the old BW dev) and some have ABT. Some also have SAP.
How can I reconcile all of this? I guess I will need all the objects to belong to Z002 with source system ABT (the new BW dev system)..
When collecting the transport in the transport connection, and looking in "package", I don't see any package aassigned to the different objects..
I get the error message:
"changes cannot be made" & Object xxxx xxxxxx cannot be saved to order" (100s of objects)...
How do I proceed?
Br,
F C
Message was edited by:
F C
Message was edited by:
F C

Hello and thanks for your input!
The old transport route was ABD --> ABT --> ABP, Now there has been a change of transport routes to ABT --> ABQ (new sys) --> ABP.
Already in the first setting, there was a problem with the collection of transports. Therefor, I had to install parts from Business Content directly in ABT. Some was however transported from ABD.
When everthing was in place in ABT, I deleted the old TMS settings and created new transport routes etc.
I have confirmed that the new routes are working. However I think that there is a mix up in the object directory entry now... Do you agree?
When looking in SE03 (object directory entry), I see that there are object entries with ABD set as original system and belonging to the old package (that was used for transports from ABD --> ABT)..
When collecting objects in the transport organizer I get lots of errors. When looking at these objects in SE03, I see that these seem to belong to the correct package and original system (according to the new setup).. Then why don't they work?
Any ideas on how to make this work?
Regards,
F C
What is needed in order to make this work?

Mass change of object catalog entries

Hi All,
Here is an issue where I need your help:
I have a transport from another system with ~100 objects and I need to change their original systems.
I started it with "SE03 -> Change Object Directory Entries of Objects in a Request", but it takes too much time (double click -> change -> save) * 100...
Is there transaction where I can change these objects' original systems within one step?
Thanks,
Gabor

Hallo,
it's a long time since the original question, but since this has been posted in SDN so many times : how to mass change a package or original system in SE03 (SE03 / report RSWBO051/RSWBO052). The solution is to select the objects you want and enter MASS in the OK-code.
Regards
Jan

DNS - NS entry on reverse lookup has changed - how to reset?

Hi,
When I view the DNS setup through the GUI in server admin everything looks as it should. However when I use Lookup in Network Utility there is a problem with the ns entry.
Using lookup on the servers FQDN (xserve.company.com) returns the correct NS entry, which is xserve.company.com. However when I query the servers IP address to perform a reverse lookup the NS entry shows ns.company.com
when I intially set up DNS all was checked and verified. Recently someone on site stopped some services and performed a hard reboot of the server as they thought it had frozen. Next time I came to the site to check things I noticed this NS entry discrepancy.
How do I or indeed can I get the NS entry on the reverse lookup back to xserve.company.com?
Thanks

Hi Jeff,
Config files in /var/named/zones appear to contain the incorrect NS entries
There are two files in the zones directory:
db.0.1.10.in-addr.arpa.zone.apple
**$TTL 10800**
**0.1.10.in-addr.arpa. IN SOA ns.company.com. admin.0.1.10.in-addr.arpa. (**
**2009031300 ;Serial**
**86400 ;Refresh**
**7200 ;Retry**
**2592000 ;Expire**
**345600 ;Negative caching TTL**
**0.1.10.in-addr.arpa. IN NS ns.company.com.**
**10.0.1.10.in-addr.arpa. IN PTR xserve.company.com.**
**db.0.1.10.in-addr.arpa.zone.apple (END)**
and
db.company.com.zone.apple
$TTL 10800
company.com. IN +SOA xserve+ john.company.com (
2009042901 ;Serial
86400 ;Refresh
3600 ;Retry
604800 ;Expire
345600 ;Negative caching TTL
company.com. IN +NS xserve+
xserve IN A 10.1.0.10
xserve IN HINFO "Apple XServe" "OSX Server 10.5.6"
db.company.com.zone.apple (END)
What I notice is that there are the incorrect NS entries in the reverse zone file but there are also differences in the forward zone file compared to another correctly working server - namely that in the above case the SOA and NS entry simply consist of the name xserve but on the other server these entries have the full domain name. (I italicized these entries so you know which I am referring to)
I guess my questions now are:
1) Should I go ahead and backup these files and edit the NS entries in the reverse zone file?
2) Should I also edit the forward zone file SOA and NS entries to the full domain name?
3) Should I stop the DNS service prior to making these changes and restart it afterwards or make the changes and then stop it and start it?
Thankyou very much for your patience and time.

Object directory entry reverse lookup

Similar Messages

Maybe you are looking for